This patch fixes the kernel test robot warning reported here:
Link: https://lore.kernel.org/all/202410241620.oApALow5-lkp@intel.com/
Use pointers annotated with the __iomem marker for all iomem map calls,
and creates a local copy of the mapped IO memory for future access in
the code. memcpy_fromio() and memcpy_toio() are used to read/write data
from/to mapped IO memory.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250617193026.637510-2-zaidal@os.amperecomputing.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 8bd25b61c5 ("smb: client: set correct d_type for reparse DFS/DFSR
and mount point") deduplicated assignment of fattr->cf_dtype member from
all places to end of the function cifs_reparse_point_to_fattr(). The only
one missing place which was not deduplicated is wsl_to_fattr(). Fix it.
Fixes: 8bd25b61c5 ("smb: client: set correct d_type for reparse DFS/DFSR and mount point")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting a share with kerberos authentication with multichannel
support, share mounts correctly, but fails to create secondary
channels. This occurs because the hostname is not populated when
adding the channels. The hostname is necessary for the userspace
cifs.upcall program to retrieve the required credentials and pass
it back to kernel, without hostname secondary channels fails
establish.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reported-by: xfuren <xfuren@gmail.com>
Link: https://bugzilla.samba.org/show_bug.cgi?id=15824
Signed-off-by: Steve French <stfrench@microsoft.com>
A kernel panic was reported with the following kernel log:
EDAC igen6: Expected 2 mcs, but only 1 detected.
BUG: unable to handle page fault for address: 000000000000d570
...
Hardware name: Notebook V54x_6x_TU/V54x_6x_TU, BIOS Dasharo (coreboot+UEFI) v0.9.0 07/17/2024
RIP: e030:ecclog_handler+0x7e/0xf0 [igen6_edac]
...
igen6_probe+0x2a0/0x343 [igen6_edac]
...
igen6_init+0xc5/0xff0 [igen6_edac]
...
This issue occurred because one memory controller was disabled by
the BIOS but the igen6_edac driver still checked all the memory
controllers, including this absent one, to identify the source of
the error. Accessing the null MMIO for the absent memory controller
resulted in the oops above.
Fix this issue by reverting the configuration structure to non-const
and updating the field 'res_cfg->num_imc' to reflect the number of
detected memory controllers.
Fixes: 20e190b1c1 ("EDAC/igen6: Skip absent memory controllers")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/all/aFFN7RlXkaK_loQb@mail-itl/
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Link: https://lore.kernel.org/r/20250618162307.1523736-1-qiuxu.zhuo@intel.com
-----BEGIN PGP SIGNATURE-----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=HE5Y
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20250618' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A small SELinux patch to resolve a UBSAN warning in the
xfrm/labeled-IPsec code"
* tag 'selinux-pr-20250618' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix selinux_xfrm_alloc_user() to set correct ctx_len
- Do not blindly enable function_graph tracer when updating funcgraph-args
When the option to trace function arguments in the function graph trace
is updated, it requires the function graph tracer to switch its
callback routine. It disables function graph tracing, updates the
callback and then re-enables function graph tracing.
The issue is that it doesn't check if function graph tracing is
currently enabled or not. If it is not enabled, it will try to
disable it and re-enable it (which will actually enable it even though
it is not the current tracer). This cause an issue in the accounting
and will trigger a WARN_ON() if the function tracer is enabled after
that.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaFLfBRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn5bAQDkMJYRnqh6tPekKooigRJ05JfBDTnv
ZlR2WZXxKUEzswEAyefKlAR/2mYlZSd7AObOnq4WxGxRSjDsplGN3sm2EgE=
=ngiv
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fix from Steven Rostedt:
- Do not blindly enable function_graph tracer when updating
funcgraph-args
When the option to trace function arguments in the function graph
trace is updated, it requires the function graph tracer to switch its
callback routine. It disables function graph tracing, updates the
callback and then re-enables function graph tracing.
The issue is that it doesn't check if function graph tracing is
currently enabled or not. If it is not enabled, it will try to
disable it and re-enable it (which will actually enable it even
though it is not the current tracer). This causes an issue in the
accounting and will trigger a WARN_ON() if the function tracer is
enabled after that.
* tag 'ftrace-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Do not enable function_graph tracer when setting funcgraph-args
- Force PIO for ATAPI devices on VT6415/VT6330 as the controller locks up
on ATAPI DMA (Tasos)
- Fix ACPI PATA cable type detection such that the controller is not
forced down to a slow transfer mode (Tasos)
- Fix build error on 32-bit UML (Johannes)
- Fix a PCI region leak in the pata_macio driver so that the driver no
longer fails to load after rmmod (Philipp)
- Use correct DMI BIOS build date for ThinkPad W541 quirk (me)
- Disallow LPM for ASUSPRO-D840SA motherboard as this board interestingly
enough gets graphical corruptions on the iGPU when LPM is enabled (me)
- Disallow LPM for Asus B550-F motherboard as this board will get command
timeouts on ports 5 and 6, yet LPM with the same drive works fine on
all other ports (Mikko)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCaFKSFwAKCRDJZDGjmcZN
colHAP9hxeB/ajtYDRUsOiR+TNSENruPwSEUTC/NNQGWHJdaugEA110Jx+HzFkb+
WCDjZTnlKSFTR+HOZlGqftPg8eAidQo=
=etpA
-----END PGP SIGNATURE-----
Merge tag 'ata-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Force PIO for ATAPI devices on VT6415/VT6330 as the controller locks
up on ATAPI DMA (Tasos)
- Fix ACPI PATA cable type detection such that the controller is not
forced down to a slow transfer mode (Tasos)
- Fix build error on 32-bit UML (Johannes)
- Fix a PCI region leak in the pata_macio driver so that the driver no
longer fails to load after rmmod (Philipp)
- Use correct DMI BIOS build date for ThinkPad W541 quirk (me)
- Disallow LPM for ASUSPRO-D840SA motherboard as this board
interestingly enough gets graphical corruptions on the iGPU when LPM
is enabled (me)
- Disallow LPM for Asus B550-F motherboard as this board will get
command timeouts on ports 5 and 6, yet LPM with the same drive works
fine on all other ports (Mikko)
* tag 'ata-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Disallow LPM for Asus B550-F motherboard
ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard
ata: ahci: Use correct BIOS build date for ThinkPad W541 quirk
ata: pata_macio: Fix PCI region leak
ata: pata_cs5536: fix build on 32-bit UML
ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
Missing the mutex init.
Fixes: 47454f2dc0 ("drm/amdgpu: Register the new sdma function pointers for sdma_v5_2")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ea685ff30a)
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b98370220e)
Cc: stable@vger.kernel.org
Missing the mutex init.
Fixes: e56d4bf57f ("drm/amdgpu/: drm/amdgpu: Register the new sdma function pointers for sdma_v5_0")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3f4caf092f)
Use the amdgpu fence container so we can store additional
data in the fence. This also fixes the start_time handling
for MCBP since we were casting the fence to an amdgpu_fence
and it wasn't.
Fixes: 3f4c175d62 ("drm/amdgpu: MCBP based on DRM scheduler (v9)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf1cd14f9e)
Cc: stable@vger.kernel.org
This commit makes two key fixes to SDMA v4.4.2 handling:
1. disable UTC_L1 in sdma_cntl register when stopping SDMA engines
by reading the current value before modifying UTC_L1_ENABLE bit.
2. Ensure UTC_L1_ENABLE is consistently managed by:
- Adding the missing register write when enabling UTC_L1 during start
- Keeping UTC_L1 enabled by default as per hardware requirements
v2: Correct SDMA_CNTL setting (Philip)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 375bf56465)
Cc: stable@vger.kernel.org
Make sure to release reset domain lock in case of failures.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Fixes: 11bb33766f ("drm/amdgpu: refactor amdgpu_device_gpu_recover")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ab11a8268)
[WHAT]
hws was checked for null earlier in dce110_blank_stream, indicating hws
can be null, and should be checked whenever it is used.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79db43611f)
Cc: stable@vger.kernel.org
Add a protection to ensure programming are all complete prior VCPU
starting. This is a WA for an unintended VCPU running.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c29521b529)
Cc: stable@vger.kernel.org
Simplify SDMA v4_4_2 queue reset and stop operations by:
1. Removing GET_INST(SDMA0) conversion for ring->me
2. Using the logical instance ID (ring->me) directly
3. Maintaining consistent behavior with other SDMA queue operations
This change aligns with the existing queue handling logic where
ring->me already represents the correct instance identifier.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3bab282dfe)
Cc: stable@vger.kernel.org
This commit makes the following improvements to SDMA engine reset handling:
1. Clarifies in the function documentation that instance_id refers to a logical ID
2. Adds conversion from logical to physical instance ID before performing reset
using GET_INST(SDMA0, instance_id) macro
3. Improves error messaging to indicate when a logical instance reset fails
4. Adds better code organization with blank lines for readability
The change ensures proper SDMA engine reset by using the correct physical
instance ID while maintaining the logical ID interface for callers.
V2: Remove harvest_config check and convert directly to physical instance (Lijo)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5efa6217c2)
Cc: stable@vger.kernel.org
[WHY]
Userspace currently is offered a range from 0-0xFF but the PWM is
programmed from 0-0xFFFF. This can be limiting to some software
that wants to apply greater granularity.
[HOW]
Convert internally to firmware values only when mapping custom
brightness curves because these are in 0-0xFF range. Advertise full
PWM range to userspace.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8dbd72cb79)
Cc: stable@vger.kernel.org
[WHY]
Backlight caps are read already in amdgpu_dm_update_backlight_caps().
They may be updated by update_connector_ext_caps(). Reading again when
registering backlight device may cause wrong values to be used.
[HOW]
Use backlight caps already registered to the dm.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 148144f6d2)
Cc: stable@vger.kernel.org
[WHAT]
Severe video playback corruption is observed in the following setup:
weston 14.0.90 (built from source) + mpv v0.40.0 with command:
mpv bbb_sunflower_1080p_60fps_normal.mp4 --vo=gpu
[HOW]
ABGR16161616 needs to be included in dml2/2.1 translation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d023de809f)
Cc: stable@vger.kernel.org
[WHY]
For non-zero DSC instances it's possible that the HUBP domain required
to drive it for sequential ONO ASICs isn't met, potentially causing
the logic to the tile to enter an undefined state leading to a system
hang.
[HOW]
Add more checks to ensure that the HUBP domain matching the DSC instance
is appropriately powered.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da63df0711)
Cc: stable@vger.kernel.org
[WHY]
These fields are read for the explicit purpose of detecting embedded LTTPRs
(i.e. between host ASIC and the user-facing port), and thus need to
calculate the correct DPCD address offset based on LTTPR count to target
the appropriate LTTPR's DPCD register space with these queries.
[HOW]
Cascaded LTTPRs in a link each snoop and increment LTTPR count when queried
via DPCD read, so an LTTPR embedded in a source device (e.g. USB4 port on a
laptop) will always be addressible using the max LTTPR count seen by the
host. Therefore we simply need to use a recently added helper function to
calculate the correct DPCD address to target potentially embedded LTTPRs
based on the received LTTPR count.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 791897f5c7)
Cc: stable@vger.kernel.org
[WHAT]
1. add dc cap for dp tunneling
2. add function to get index of host router
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29e178d139)
Cc: stable@vger.kernel.org
Relocate the per-SDMA queue reset capability check from
kfd_topology_set_capabilities() to node_show() to ensure we read the
latest value of sdma.supported_reset after all IP blocks are initialized.
Fixes: ceb7114c96 ("drm/amdkfd: flag per-sdma queue reset supported to user space")
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e17df7b086)
Prevent other bits of mailbox power limit from being overwritten with 0.
This issue was due to a missing read and modify of current power limit,
before setting a requested mailbox power limit, which is added in this
patch.
v2:
- Improve commit message. (Anshuman)
v3:
- Rebase.
- Rephrase commit message. (Riana)
- Add read-modify-write variant of xe_hwmon_pcode_write_power_limit()
i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal)
- Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits.
- Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits
writes use xe_hwmon_pcode_rmw_power_limit() only.
v4:
- Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever
applicable. (Riana)
Fixes: 7596d839f6 ("drm/xe/hwmon: Add support to manage power limits though mailbox")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix the following missing-prototypes build warning:
drivers/spi/spi-falcon.c:97:5: error: no previous prototype for 'falcon_sflash_xfer' [-Werror=missing-prototypes]
97 | int falcon_sflash_xfer(struct spi_device *spi, struct spi_transfer *t,
| ^~~~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://patch.msgid.link/OSBPR01MB16705BE87E549B6210CD6BCABC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42xx8 codecs may be used with audio graph card and thus may require
an additional property: 'port'. Add it.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250617144619.1130857-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add CS35L63 to the list of parts supported by the cs35l56 driver and
mention the CS35L63 where the text refers to the supported part numbers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250618145547.152814-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Missing the mutex init.
Fixes: 47454f2dc0 ("drm/amdgpu: Register the new sdma function pointers for sdma_v5_2")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing the mutex init.
Fixes: e56d4bf57f ("drm/amdgpu/: drm/amdgpu: Register the new sdma function pointers for sdma_v5_0")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the amdgpu fence container so we can store additional
data in the fence. This also fixes the start_time handling
for MCBP since we were casting the fence to an amdgpu_fence
and it wasn't.
Fixes: 3f4c175d62 ("drm/amdgpu: MCBP based on DRM scheduler (v9)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an API to set the max possible xgmi speed/width.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi doesn't have discrete max speeds defined. Speed numbers can be
arbitrary based on SOC. Deprecate the enum.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of unexpected errors, check if device is alive on the bus.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to report PLDM firmware version and board voltage on SMU
v13.0.12 SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PMFW metrics table definition to version 0x13
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP v14 fw update introduced changes on memory reservation region, according
to the change driver reclaim some non-reserved region.
1. introduce 2 new psp commands to query fw reservation regions
2. add a new reservation region for psp
3. reclaim psp non-used region
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when amdgpu_bad_page_threshold == -1 or -2, driver will issue a warning
message when threshold is reached and continue runtime services.
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit makes two key fixes to SDMA v4.4.2 handling:
1. disable UTC_L1 in sdma_cntl register when stopping SDMA engines
by reading the current value before modifying UTC_L1_ENABLE bit.
2. Ensure UTC_L1_ENABLE is consistently managed by:
- Adding the missing register write when enabling UTC_L1 during start
- Keeping UTC_L1 enabled by default as per hardware requirements
v2: Correct SDMA_CNTL setting (Philip)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure to release reset domain lock in case of failures.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Fixes: 11bb33766f ("drm/amdgpu: refactor amdgpu_device_gpu_recover")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move the dpm table setting back after featureenablemend due to dependancy.
For SMUv13.0.6, there is no pptable. Those frequency tables are available
through FW metrics and it needs DPM to be enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to properly start and stop paging queues if they are present.
This is not an issue today since we don't support a paging queue
on any chips with queue reset.
Fixes: b22659d5d3 ("drm/amdgpu: switch amdgpu_sdma_reset_engine to use the new sdma function pointers")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC v3.2.338 summary:
* DML bug fixes
* Add pwait to DMCUB hang reporting
* New definitions / changes to prep for new platforms.
* Misc cleanups
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The functions in this commit are defined for dpp401 but never used.
Removing them as they are not necessary.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
some new asics will have an APG instance taking over certain functions.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
