the `__runtime_fixup_32` function does not handle the case where `val` is
zero correctly (as might occur when patching a nommu kernel and referring
to a physical address below the 4GiB boundary whose upper 32 bits are all
zero) because nothing in the existing logic prevents the code from taking
the `else` branch of both nop-checks and emitting two `nop` instructions.
This leaves random garbage in the register that is supposed to receive the
upper 32 bits of the pointer instead of zero that when combined with the
value for the lower 32 bits yields an invalid pointer and causes a kernel
panic when that pointer is eventually accessed.
The author clearly considered the fact that if the `lui` is converted into
a `nop` that the second instruction needs to be adjusted to become an `li`
instead of an `addi`, hence introducing the `addi_insn_mask` variable, but
didn't follow that logic through fully to the case where the `else` branch
executes. To fix it just adjust the logic to ensure that the second `else`
branch is not taken if the first instruction will be patched to a `nop`.
Fixes: a44fb57221 ("riscv: Add runtime constant support")
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250530211422.784415-2-cmirabil@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Most of the packetdrill tests have not flaked once last week.
Add the few which did to the XFAIL list.
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610000001.1970934-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once the THREADED napi is disabled, the napi kthread should also be
stopped. Keeping the kthread intact after disabling THREADED napi makes
the PID of this kthread show up in the output of netlink 'napi-get' and
ps -ef output.
The is discussed in the patch below:
https://lore.kernel.org/all/20250502191548.559cc416@kernel.org
NAPI kthread should stop only if,
- There are no pending napi poll scheduled for this thread.
- There are no new napi poll scheduled for this thread while it has
stopped.
- The ____napi_schedule can correctly fallback to the softirq for napi
polling.
Since napi_schedule_prep provides mutual exclusion over STATE_SCHED bit,
it is safe to unset the STATE_THREADED when SCHED_THREADED is set or the
SCHED bit is not set. SCHED_THREADED being set means that SCHED is
already set and the kthread owns this napi.
To disable threaded napi, unset STATE_THREADED bit safely if
SCHED_THREADED is set or SCHED is unset. Once STATE_THREADED is unset
safely then wait for the kthread to unset the SCHED_THREADED bit so it
safe to stop the kthread.
Add a new test in nl_netdev to verify this behaviour.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..6
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.nsim_rxq_reset_down
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Ran neper for 300 seconds and did enable/disable of thread napi in a
loop continuously.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250609173015.3851695-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable memory-mapped I/O access to RMON statistics registers for devices
known to work correctly. Currently, only the D-Link DGE-550T (`0x4000`)
with PCI revision A3 (`0x0c`) is allowed.
To avoid issues on other hardware, a runtime check was added to restrict
MMIO usage. The `MEM_MAPPING` macro was removed in favor of runtime
detection.
To access RMON registers, the code `dw32(RmonStatMask, 0x0007ffff);`
must also be skipped, so this patch conditionally disables it as well.
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Link: https://patch.msgid.link/20250610000130.49065-2-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before appending sysdata, prepare_extradata() checks if any feature is
enabled in sysdata_fields (and exits early if none is enabled).
When SYSDATA_RELEASE was introduced, we missed adding it to the list of
features being checked against sysdata_fields in prepare_extradata().
The result was that, if only SYSDATA_RELEASE is enabled in
sysdata_fields, we incorreclty exit early and fail to append the
release.
Instead of checking specific bits in sysdata_fields, check if
sysdata_fields has ALL bit zeroed and exit early if true. This fixes
case when only SYSDATA_RELEASE enabled and makes the code more general /
less error prone in future feature implementation.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Fixes: cfcc9239e7 ("netconsole: append release to sysdata")
Link: https://patch.msgid.link/20250609-netconsole-fix-v1-1-17543611ae31@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmhH/swTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnONCCACa16bTW53gBzmiTxdEgUJ/h+gQuR8G
Fj+yOYIWNZY/YOExa40ldApu3iB9UAB0D+FOly4Wv5zYDct6yNBxqtZjbkTFMaoi
3i+SSrRLNtIxgGs1KgJKVPis8mhCqiBL0aGoJDGyRiye6hotECDyQWvlGM3lMGUr
wdMDQW2xyKOWvm++jXijkUMyKThmI7czlSH8al+JU9KcAO9hiUlGzejdI56KUIMW
TRlg2QSK9CfIzgUP4RQughbF59/8Xbq3LOidu50xMad2wiOJj0IUHB0h6LoAshnS
jFy4Ox4Gw5hcmdaEKazjYEtq3nQeZ6wct7jThw02e4D9h0ac2MCVhphk
=Pt9d
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-06-10
The first 4 patches are by Vincent Mailhol and prepare the CAN netlink
interface for the introduction of CAN XL configuration.
Geert Uytterhoeven's patch updates the CAN networking documentation.
The last 2 patched are by Davide Caratti and introduce skb drop
reasons in the receive path of several CAN protocols.
* tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: add drop reasons in CAN protocols receive path
can: add drop reasons in the receive path of AF_CAN
documentation: networking: can: Document alloc_candev_mqs()
can: netlink: can_changelink(): rename tdc_mask into fd_tdc_flag_provided
can: bittiming: rename can_tdc_is_enabled() into can_fd_tdc_is_enabled()
can: bittiming: rename CAN_CTRLMODE_TDC_MASK into CAN_CTRLMODE_FD_TDC_MASK
can: netlink: replace tabulation by space in assignment
====================
Link: https://patch.msgid.link/20250610094933.1593081-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just because otx2_atomic64_add is using u64 pointer as argument
all callers has to typecast __iomem void pointers which inturn
causing sparse warnings. Fix those by changing otx2_atomic64_add
argument to void pointer.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749484421-3607-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch removes unnecessary typecasts by marking the
mbox_regions array as __iomem since it is used to store
pointers to memory-mapped I/O (MMIO) regions. Also simplified
the call to readq() in PF driver by removing redundant type casts.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749484309-3434-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new function, netif_subqueue_sent, which is a wrapper for
netdev_tx_sent_queue.
Drivers that use the subqueue variant macros, netif_subqueue_xxx,
identify queue by index and are not required to obtain
struct netdev_queue explicitly.
Such drivers still need to call netdev_tx_sent_queue which is a
counterpart of netif_subqueue_completed_wake. Allowing drivers to use a
subqueue variant for this purpose improves their code consistency by
always referring to queue by its index.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/909a5c92db49cad39f0954d6cb86775e6480ef4c.1749038081.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit fd2a9b29dc ("HID: wacom: Remove AES power_supply after extended
inactivity") introduced wacom_aes_battery_handler() which is scheduled
as a delayed work (aes_battery_work).
In wacom_remove(), aes_battery_work is not canceled. Consequently, if
the device is removed while aes_battery_work is still pending, then hard
crashes or "Oops: general protection fault..." are experienced when
wacom_aes_battery_handler() is finally called. E.g., this happens with
built-in USB devices after resume from hibernate when aes_battery_work
was still pending at the time of hibernation.
So, take care to cancel aes_battery_work in wacom_remove().
Fixes: fd2a9b29dc ("HID: wacom: Remove AES power_supply after extended inactivity")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-06-09 (ice, i40e, ixgbe, iavf)
Jake moves from individual virtchnl RSS configuration values, for ice,
i40e, and iavf, to a common libie location and values.
Martyna and Dawid add counters for link_down_events to ice, i40e, and
ixgbe drivers. The counter increments only on actual physical link-down
events visible to the PHY. It does not increment when the user performs
a software-only interface down/up (e.g. ip link set dev down).
The counter does increment in cases where the interface is reinitialized
in a way that causes a real link drop - such as eg. when attaching
an XDP program, reconfiguring channels, or toggling certain priv-flags.
For ice:
Arkadiusz and Karol separate PTP and DPLL functionality to their
respective APIs.
Michal adds a separate handler for Flow Director command processing.
For iavf:
Ahmed converts driver to utilize core's IRQ affinity API.
For ixgbe:
Alok Tiwari fixes issues with some comments; typos, copy/paste errors,
etc.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbe: Fix typos and clarify comments in X550 driver code
iavf: convert to NAPI IRQ affinity API
ice: add a separate Rx handler for flow director commands
ice: add ice driver PTP pin documentation
ice: change SMA pins to SDP in PTP API
ice: redesign dpll sma/u.fl pins control
ixgbe: add link_down_events statistic
i40e: add link_down_events statistic
ice: add link_down_events statistic
net: intel: move RSS packet classifier types to libie
net: intel: rename 'hena' to 'hashcfg' for clarity
====================
Link: https://patch.msgid.link/20250609212652.1138933-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function was introduced in commit 783da70e83 ("net: add
sock_enable_timestamps"), with one caller in rxrpc.
That only caller was removed in commit 7903d4438b ("rxrpc: Don't use
received skbuff timestamps").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250609153254.3504909-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last use of t3_l2t_send_event() was removed in 2019 by
commit 30e0f6cf5a ("RDMA/iw_cxgb3: Remove the iw_cxgb3 module from
kernel")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250609152330.24027-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TP-Link UE200 is a RTL8152B based USB 2.0 Fast Ethernet adapter. This
patch adds its device ID. It has been tested on Ubuntu 22.04.5.
Signed-off-by: Lucas Sanchez Sagrado <lucsansag@gmail.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20250609145536.26648-1-lucsansag@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A decade ago commit 6d08acd2d3 ("in6: fix conflict with glibc")
hid the definitions of IPV6 options, because GCC was complaining
about duplicates. The commit did not list the warnings seen, but
trying to recreate them now I think they are (building iproute2):
In file included from ./include/uapi/rdma/rdma_user_cm.h:39,
from rdma.h:16,
from res.h:9,
from res-ctx.c:7:
../include/uapi/linux/in6.h:171:9: warning: ‘IPV6_ADD_MEMBERSHIP’ redefined
171 | #define IPV6_ADD_MEMBERSHIP 20
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/include/netinet/in.h:37,
from rdma.h:13:
/usr/include/bits/in.h:233:10: note: this is the location of the previous definition
233 | # define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
| ^~~~~~~~~~~~~~~~~~~
../include/uapi/linux/in6.h:172:9: warning: ‘IPV6_DROP_MEMBERSHIP’ redefined
172 | #define IPV6_DROP_MEMBERSHIP 21
| ^~~~~~~~~~~~~~~~~~~~
/usr/include/bits/in.h:234:10: note: this is the location of the previous definition
234 | # define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
| ^~~~~~~~~~~~~~~~~~~~
Compilers don't complain about redefinition if the defines
are identical, but here we have the kernel using the literal
value, and glibc using an indirection (defining to a name
of another define, with the same numerical value).
Problem is, the commit in question hid all the IPV6 socket
options, and glibc has a pretty sparse list. For instance
it lacks Flow Label related options. Willem called this out
in commit 3fb321fde2 ("selftests/net: ipv6 flowlabel"):
/* uapi/glibc weirdness may leave this undefined */
#ifndef IPV6_FLOWINFO
#define IPV6_FLOWINFO 11
#endif
More interestingly some applications (socat) use
a #ifdef IPV6_FLOWINFO to gate compilation of thier
rudimentary flow label support. (For added confusion
socat misspells it as IPV4_FLOWINFO in some places.)
Hide only the two defines we know glibc has a problem
with. If we discover more warnings we can hide more
but we should avoid covering the entire block of
defines for "IPV6 socket options".
Link: https://patch.msgid.link/20250609143933.1654417-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.
These counters include:
- Aggregate Rx/Tx drop counters
- Per-TC Rx/Tx packet counters
- Per-TC Rx/Tx byte counters
- Per-TC Rx/Tx pause frame counters
The counters are exposed using ethtool_ops->get_ethtool_stats and
ethtool_ops->get_strings. This feature/counters are not available
to all versions of hardware.
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
netconsole: Optimize console registration and improve testing
During performance analysis of console subsystem latency, I discovered that
netconsole registers console handlers even when no active targets exist.
These orphaned console handlers are invoked on every printk() call, get
the lock, iterate through empty target lists, and consume CPU cycles
without performing any useful work.
This patch series addresses the inefficiency by:
1. Implementing dynamic console registration/unregistration based on target
availability, ensuring console handlers are only active when needed
2. Adding automatic cleanup of unused console registrations when targets
are disabled or removed
3. Extending the selftest suite to cover non-extended console format,
which was previously untested
The optimization reduces printk() overhead by eliminating unnecessary
function calls and list traversals when netconsole targets are not
configured, improving overall system performance during heavy logging
scenarios.
v2: https://lore.kernel.org/20250602-netcons_ext-v2-0-ef88d999326d@debian.org
v1: https://lore.kernel.org/20250528-netcons_ext-v1-1-69f71e404e00@debian.org
====================
Link: https://patch.msgid.link/20250609-netcons_ext-v3-0-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the netconsole selftest to validate both basic and extended
target formats. The basic format is a simpler variant that doesn't
support userdata or release functionality.
The test now validates that netconsole works correctly in both
configurations, improving test coverage for different netconsole
deployment scenarios.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-4-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the exit call from validate_result() function and move the
test exit logic to the main script. This allows the function to
be reused in scenarios where the test needs to continue execution
after validation, rather than terminating immediately.
The validate_result() function should focus on validation logic
only, while the calling script maintains control over program
flow and exit conditions. This change improves code modularity
and prepares for potential future enhancements where multiple
validations might be needed in a single test run.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-3-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add unregister_netcons_consoles() function to automatically unregister
console handlers when no targets of the corresponding type remain active.
The function iterates through the target list to determine which console
types (basic vs extended) are still needed, and unregisters any console
handlers that are no longer required. This prevents having registered
console handlers without corresponding active targets.
The function is called when a target is disabled and moved to the cleanup
list, ensuring proper cleanup of unused console registrations.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-2-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netconsole driver currently registers the basic console driver
unconditionally during initialization, even when only extended targets
are configured. This results in unnecessary console registration and
performance overhead, as the write_msg() callback is invoked for every
log message only to return early when no matching targets are found.
Optimize the driver by conditionally registering console drivers based
on the actual target configuration. The basic console driver is now
registered only when non-extended targets exist, same as the extended
console. The implementation also handles dynamic target creation through
the configfs interface.
This change eliminates unnecessary console driver registrations,
redundant write_msg() callbacks for unused console types, and associated
lock contention and target list iterations. The optimization is
particularly beneficial for systems using only the most common extended
console type.
Fixes: e2f15f9a79 ("netconsole: implement extended console support")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-1-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
user can configurare scrub cycle for a region or a memory device via
sysfs interface. Currently, these interfaces have not enough description
for the return value. So adding return value description to these
interfaces.
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20250603104314.25569-2-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When trying to update the scrub_cycle value of a cxl region, which means
updating the scrub_cycle value of each memdev under a cxl region. cxl
driver needs to guarantee the new scrub_cycle value is greater than the
min_scrub_cycle value of a memdev, otherwise the updating operation will
fail(Per Table 8-223 in CXL r3.2 section 8.2.10.9.11.1).
Current implementation logic of getting the min_scrub_cycle value of a
cxl region is that getting the min_scrub_cycle value of each memdevs
under the cxl region, then using the minimum min_scrub_cycle value as
the region's min_scrub_cycle. Checking if the new scrub_cycle value is
greater than this value. If yes, updating the new scrub_cycle value to
each memdevs. The issue is that the new scrub_cycle value is possibly
greater than the minimum min_scrub_cycle value of all memdevs but less
than the maximum min_scrub_cycle value of all memdevs if memdevs have
a different min_scrub_cycle value. The updating operation will always
fail on these memdevs which have a greater min_scrub_cycle than the new
scrub_cycle.
The correct implementation logic is to get the maximum value of these
memdevs' min_scrub_cycle, check if the new scrub_cycle value is greater
than the value. If yes, the new scrub_cycle value is fit for the region.
The change also impacts the result of
cxl_patrol_scrub_get_min_scrub_cycle(), the interface returned the
minimum min_scrub_cycle value among all memdevs under the region before
the change. The interface will return the maximum min_scrub_cycle value
among all memdevs under the region with the change.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20250603104314.25569-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
.rodata is implicitly included in the PT_DYNAMIC segment due to
inheriting the segment of the preceding .dynamic section (in both GNU ld
and LLD). When the .rodata section's size is not a multiple of 16
bytes on riscv64, llvm-readelf will report a "PT_DYNAMIC dynamic table
is invalid" warning. Note: in the presence of the .dynamic section, GNU
readelf and llvm-readelf's -d option decodes the dynamic section using
the section.
This issue arose after commit 8f8c1ff879
("riscv: vdso.lds.S: remove hardcoded 0x800 .text start addr"), which
placed .rodata directly after .dynamic by removing .eh_frame.
This patch resolves the implicit inclusion into PT_DYNAMIC by explicitly
specifying the :text output section phdr.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2093
Signed-off-by: Fangrui Song <i@maskray.me>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250602-riscv-vdso-v1-1-0620cf63cff0@maskray.me
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Add support for the video clock controller found on SM6350 based
devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Co-developed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250324-sm6350-videocc-v2-3-cc22386433f4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device ID of Wildcat Lake into ishtp support list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace the usage of PCI_VDEVICE() with driver_data assignment in the ISH
PCI device table with the PCI_DEVICE_DATA() macro. This improves code
readability.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add the IRIS video-codec node on QCS8300 platform to support video
functionality.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250501-qcs8300_iris-v7-4-b229d5347990@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 2f2bd7cbd1 ("hid: lenovo: Resend all settings on reset_resume
for compact keyboards") introduced a regression for ThinkPad TrackPoint
Keyboard II by removing the conditional check for enabling F7/9/11 mode
needed for compact keyboards only. As a result, the non-compact
keyboards can no longer toggle Fn-lock via Fn+Esc, although it can be
controlled via sysfs knob that directly sends raw commands.
This patch restores the previous conditional check without any
additions.
Cc: stable@vger.kernel.org
Fixes: 2f2bd7cbd1 ("hid: lenovo: Resend all settings on reset_resume for compact keyboards")
Signed-off-by: Iusico Maxim <iusico.maxim@libero.it>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an
audio device is requested to get specific report id, the following error
may occur.
[ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd
[ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00
[ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device
[ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
[ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
[ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35
[ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2
[ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint
[ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
Ignore HID interface. The device is working properly.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
I've been focusing on networking BPF bits lately, add myself as a
reviewer.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250610175442.2138504-1-stfomichev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Plugging in a "Blue snowball" microphone always shows the
error 'No inputs registered, leaving', but the device functions as
intended.
When a HID device is started using the function hid_hw_start() and
the argument HID_CONNECT_DEFAULT it will try all various hid connect
requests. Not all devices will create an input device and so the
message is needlessly noisy. Decrease it to debug instead.
[jkosina@suse.com: edit shortlog]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When detecting an invalid list->hdev, the process needs to manually set
its state to TASK_RUNNING and exit. In the original code,
set_current_state() (which includes a memory barrier) is used here, but
it is immediately followed by a mutex_unlock() call. Since
mutex_unlock() internally includes a memory barrier, this ensures that
all modifications within the critical section (including the process
state) are visible to other CPUs. Therefore, replacing it with
__set_current_state() (without an implicit barrier) avoids redundant
memory barriers.
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Two 'static inline' TDX helper functions (sc_retry() and
sc_retry_prerr()) take function pointer arguments which refer to
assembly functions. Normally, the compiler inlines the TDX helper,
realizes that the function pointer targets are completely static --
thus can be resolved at compile time -- and generates direct call
instructions.
But, other times (like when CONFIG_CC_OPTIMIZE_FOR_SIZE=y), the
compiler declines to inline the helpers and will instead generate
indirect call instructions.
Indirect calls to assembly functions require special annotation (for
various Control Flow Integrity mechanisms). But TDX assembly
functions lack the special annotations and can only be called
directly.
Annotate both the helpers as '__always_inline' to prod the compiler
into maintaining the direct calls. There is no guarantee here, but
Peter has volunteered to report the compiler bug if this assumption
ever breaks[1].
Fixes: 1e66a7e275 ("x86/virt/tdx: Handle SEAMCALL no entropy error in common code")
Fixes: df01f5ae07 ("x86/virt/tdx: Add SEAMCALL error printing for module initialization")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20250605145914.GW39944@noisy.programming.kicks-ass.net/ [1]
Link: https://lore.kernel.org/all/20250606130737.30713-1-kai.huang%40intel.com
Fixes blank line warning from checkpatch.pl script
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Fixes chechpatch.pl warning about missing blank line
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
