This adds header for the Tegra114 SOCTHERM device tree node.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20250828055104.8073-5-clamor95@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Tegra114 has a different fuse calibration register layout and address
compared to other Tegra SoCs, requiring SOCTHERM shift, mask, register
address, and nominal tf calibration value to be configurable.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20250828055104.8073-4-clamor95@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Document SOCTHERM Thermal Management System found in the Tegra 4 SoC.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250828055104.8073-3-clamor95@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The R-Car Gen3 thermal driver supports both R-Car Gen3 and Gen4 SoCs.
Update the Kconfig entry.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250905193322.148115-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Fix typo to millidegree Celsius. This aligns the comment with
another comment later on the same function. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250907154148.171496-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
It was showing wrong error message as ARM threshold
thremal trip for setting LOW threshold thermal trip.
Fix this incorrect error message for setting LOW
threshold thermal trip.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250710175426.5789-1-sumeet4linux@gmail.com
As reported by LKP, the Qualcomm LMH driver needs to include several
IRQ-related headers, which decrlare necessary IRQ functionality.
Currently driver builds on ARM64 platforms, where the headers are pulled
in implicitly by other headers, but fails to build on other platforms.
Fixes: 53bca371cd ("thermal/drivers/qcom: Add support for LMh driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507270042.KdK0KKht-lkp@intel.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250728-lmh-scm-v2-2-33bc58388ca5@oss.qualcomm.com
The QCOM_SCM symbol is not user-visible, so it makes little sense to
depend on it. Make LMH driver select QCOM_SCM as all other drivers do
and, as the dependecy is now correctly handled, enable || COMPILE_TEST
in order to include the driver into broader set of build tests.
Fixes: 9e5a4fb842 ("thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250728-lmh-scm-v2-1-33bc58388ca5@oss.qualcomm.com
./drivers/thermal/mediatek/lvts_thermal.c:642:2-3: Unneeded semicolon.
A semicolon is present after the closing bracket of the loop, let's
remove it.
No functional change intended.
[ dlezcano : Reworded the description and reordered the tags order ]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=23244
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250801063540.2959610-1-jiapeng.chong@linux.alibaba.com
Add default trimming values for the four temperature sensors located
in Renesas R-Car V4H Working Sample SoC. The trimming values are
identical for all four THS temperature sensors.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250625181739.28391-2-marek.vasut+renesas@mailbox.org
The Working Sample R-Car SoCs may not yet have thermal sensor trimming
values programmed into fuses, those fuses are blank instead. For such
SoCs, the driver includes fallback trimming values. Those values are
currently applied to all SoCs which use this driver.
Introduce support for per-SoC fallback trimming values in preparation
for SoCs which do not use these current trimming values. No functional
change is intended here.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250625181739.28391-1-marek.vasut+renesas@mailbox.org
Add compatibility string for the thermal sensors on QCS615 platform.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Link: https://lore.kernel.org/r/20250624064945.764245-2-quic_gkohli@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[Why]
When DC adds common modes it adds modes with a string to match what
they are. Non-DC doesn't. This can be inconsistent when turning on/off
DC support.
[How]
Add a name member to common_modes[] and copy it into the drm display
mode.
Cc: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Link: https://lore.kernel.org/r/20250924161624.1975819-6-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC and non-DC codepaths have different sets of common modes that are
added for eDP and LVDS cases. This can cause different behaviors for
turning on DC on hardware that can support both.
[How]
Drop extra modes from amdgpu_connector_add_common_modes() not present
in amdgpu_dm_connector_add_common_modes().
Cc: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250924161624.1975819-5-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adding or removing a mode from common_modes[] can be fragile if a user
forgot to update the for loop boundaries.
[How]
Use ARRAY_SIZE() to detect size of the array and use that instead.
Cc: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Link: https://lore.kernel.org/r/20250924161624.1975819-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dce100_validate_global function was verbatim exactly the
same as dce60_validate_global and dce80_validate_global.
Share dce100_validate_global between DCE6-10 to save code size.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE6-8 have very similar capabilities to DCE10, they support the
same DP and HDMI versions and work similarly.
Share dce100_validate_bandwidth between DCE6-10 to reduce code
duplication in the DC driver.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit fixes a potential race condition in the userqueue fence
signaling mechanism by replacing dma_fence_is_signaled_locked() with
dma_fence_is_signaled().
The issue occurred because:
1. dma_fence_is_signaled_locked() should only be used when holding
the fence's individual lock, not just the fence list lock
2. Using the locked variant without the proper fence lock could lead
to double-signaling scenarios:
- Hardware completion signals the fence
- Software path also tries to signal the same fence
By using dma_fence_is_signaled() instead, we properly handle the
locking hierarchy and avoid the race condition while still maintaining
the necessary synchronization through the fence_list_lock.
v2: drop the comment (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject modes with a pixel clock higher than the maximum display
clock. Use 400 MHz as a fallback value when the maximum display
clock is not known. Pixel clocks that are higher than the display
clock just won't work and are not supported.
With the addition of the YUV422 fallback, DC can now accidentally
select a mode requiring higher pixel clock than actually supported
when the DP version supports the required bandwidth but the clock
is otherwise too high for the display engine. DCE 6-10 don't
support these modes but they don't have a bandwidth calculation
to reject them properly.
Fixes: db291ed173 ("drm/amd/display: Add fallback path for YCBCR422")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_connector_add_common_modes() has a check for the width and height
of common modes being too small, but the array of common_modes[] has fixed
values. The check is dead code.
[How]
Drop unnecessary check.
Cc: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250924161624.1975819-3-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The main reason common modes are added is for compatibility with
clone mode when a laptop is connected to a projector or external
monitor. Since commit 978fa2f6d0 ("drm/amd/display: Use scaling
for non-native resolutions on eDP") when non-native modes are picked
for eDP the GPU scalar will be used. This is because it is inconsistent
whether eDP panels have the capability to actually drive non-native
resolutions. With panels connected to other connectors this limitation
generally doesn't exist as we the EDID will advertise support for a
number of resolutions and monitors will use built in scaling hardware.
Comparing DC and non-DC code paths the non-DC code path only adds
common modes for LVDS and eDP whereas the DC codepath does it for
all connector types.
In the past there was an experiment done to disable common mode adding
for eDP and LVDS from commit 6d396e7ac1 ("drm/amd/display: Disable
common modes for LVDS") and commit 7948afb46a ("drm/amd/display:
Disable common modes for eDP") but this was reverted in
commit a8b79b0918 ("drm/amd: Re-enable common modes for eDP and
LVDS") because it caused problems with Xorg.
[How]
Only add common modes for eDP and LVDS for DC, matching the behavior
of non-DC.
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250924161624.1975819-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variable "i" has been redeclared as integer later in the function
which is wrong and not serving any purpose.
Fixes: 899fbde146 ("drm/amdgpu: replace get_user_pages with HMM mirror helpers")
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a .gitignore for the test case build object.
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It should return an error code if userq VA validation fails.
Fixes: 9e46b8bb05 ("drm/amdgpu: validate userq buffer virtual address and size")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e44a0fe630.
Initially we used VMID reservation to enforce isolation between
processes. That has now been replaced by proper fence handling.
Both OpenGL, RADV and ROCm developers requested a way to reserve a VMID
for SPM, so restore that approach by reverting back to only allowing a
single process to use the reserved VMID.
Only compile tested for now.
v2: use -ENOENT instead of -EINVAL if VMID is not available
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initially we enforced isolation by reserving a VMID, but that practice
was now removed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a fallback mechanism to attempt pipe reset when KCQ reset
fails to recover the ring. After performing the KCQ reset and
queue remapping, test the ring functionality. If the ring test
fails, initiate a pipe reset as an additional recovery step.
v2: fix the typo (Lijo)
v3: try pipeline reset when kiq mapping fails (Lijo)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
commit 530694f54d ("drm/amdgpu: do not resume device in thaw for
normal hibernation") optimized the flow for systems that are going
into S4 where the power would be turned off. Basically the thaw()
callback wouldn't resume the device if the hibernation image was
successfully created since the system would be powered off.
This however isn't the correct flow for a system entering into
s0i3 after the hibernation image is created. Some of the amdgpu
callbacks have different behavior depending upon the intended
state of the suspend.
[How]
Use pm_hibernation_mode_is_suspend() as an input to decide whether
to run resume during thaw() callback.
Reported-by: Ionut Nechita <ionut_n2001@yahoo.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4573
Tested-by: Ionut Nechita <ionut_n2001@yahoo.com>
Fixes: 530694f54d ("drm/amdgpu: do not resume device in thaw for normal hibernation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Kenneth Crudup <kenny@panix.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+: 495c8d3503: PM: hibernate: Add pm_hibernation_mode_is_suspend()
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some drivers have different flows for hibernation and suspend. If
the driver opportunistically will skip thaw() then it needs a hint
to know what is happening after the hibernate.
Introduce a new symbol pm_hibernation_mode_is_suspend() that drivers
can call to determine if suspending the system for this purpose.
Tested-by: Ionut Nechita <ionut_n2001@yahoo.com>
Tested-by: Kenneth Crudup <kenny@panix.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hybrid sleep will hibernate the system followed by running through
the suspend routine. Since both the hibernate and the suspend routine
will call pm_restrict_gfp_mask(), pm_restore_gfp_mask() must be called
before starting the suspend sequence.
Add an explicit call to pm_restore_gfp_mask() to power_down() before
the suspend sequence starts. Add an extra call for pm_restrict_gfp_mask()
when exiting suspend so that the pm_restore_gfp_mask() call in hibernate()
is balanced.
Reported-by: Ionut Nechita <ionut_n2001@yahoo.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4573
Tested-by: Ionut Nechita <ionut_n2001@yahoo.com>
Fixes: 12ffc3b151 ("PM: Restrict swap use to later in the suspend sequence")
Tested-by: Kenneth Crudup <kenny@panix.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250925185108.2968494-2-superm1@kernel.org
[ rjw: Add comment explainig the new pm_restrict_gfp_mask() call purpose ]
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The RPMI specification defines a clock service group which can be
accessed via SBI MPXY extension or dedicated S-mode RPMI transport.
Add mailbox client based clock driver for the RISC-V RPMI clock
service group.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-11-apatel@ventanamicro.com
[pjw@kernel.org: converted rpmi_clkrate_u64 macro to a function; replaced bare constant with a macro]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add device tree bindings for the RPMI clock service group based
controller for the supervisor software.
The RPMI clock service group is defined by the RISC-V platform
management interface (RPMI) specification.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-10-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add device tree bindings for the RPMI clock service group based
message proxy implemented by the SBI implementation (machine mode
firmware or hypervisor).
The RPMI clock service group is defined by the RISC-V platform
management interface (RPMI) specification.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250818040920.272664-9-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The following code paths may result in high latency or even task hangs:
1. fastcommit io is throttled by wbt.
2. jbd2_fc_wait_bufs() might wait for a long time while
JBD2_FAST_COMMIT_ONGOING is set in journal->flags, and then
jbd2_journal_commit_transaction() waits for the
JBD2_FAST_COMMIT_ONGOING bit for a long time while holding the write
lock of j_state_lock.
3. start_this_handle() waits for read lock of j_state_lock which
results in high latency or task hang.
Given the fact that ext4_fc_commit() already modifies the current
process' IO priority to match that of the jbd2 thread, it should be
reasonable to match jbd2's IO submission flags as well.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250827121812.1477634-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In June 2015, commit c290ea01ab ("fs: Remove ext3 filesystem driver")
removed the historic ext3 filesystem support as ext3 partitions are fully
supported with the ext4 filesystem support. To simplify updating the kernel
build configuration, which had only EXT3 support but not EXT4 support
enabled, the three config options EXT3_{FS,FS_POSIX_ACL,FS_SECURITY} were
kept, instead of immediately removing them. The three options just enable
the corresponding EXT4 counterparts when configs from older kernel versions
are used to build on later kernel versions. This ensures that the kernels
from those kernel build configurations would then continue to have EXT4
enabled for supporting booting from ext3 and ext4 file systems, to avoid
potential unexpected surprises.
Given that the kernel build configuration has no backwards-compatibility
guarantee and this transition phase for such build configurations has been
in place for a decade, we can reasonably expect all such users to have
transitioned to use the EXT4 config options in their config files at this
point in time. With that in mind, the three EXT3 config options are
obsolete by now.
Remove the obsolete EXT3 config options.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In commit 6a3afb6ac6 ("jbd2: increase the journal IO's priority"),
the priority of IOs initiated by jbd2 has been raised, exempting them
from WBT throttling.
Checkpoint is also a crucial operation of jbd2. While no serious issues
have been observed so far, it should still be reasonable to exempt
checkpoint from WBT throttling.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The implicit __GFP_NOFAIL flag in ext4_sb_bread() was removed in commit
8a83ac5494 ("ext4: call bdev_getblk() from sb_getblk_gfp()"), meaning
the function can now fail under memory pressure.
Most callers of ext4_sb_bread() propagate the error to userspace and do not
remount the filesystem read-only. However, ext4_free_branches() handles
ext4_sb_bread() failure by remounting the filesystem read-only.
This implies that an ext3 filesystem (mounted via the ext4 driver) could be
forcibly remounted read-only due to a transient page allocation failure,
which is unacceptable.
To mitigate this, introduce a new helper function, ext4_sb_bread_nofail(),
which explicitly uses __GFP_NOFAIL, and use it in ext4_free_branches().
Fixes: 8a83ac5494 ("ext4: call bdev_getblk() from sb_getblk_gfp()")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With commit 1d6204e2f5 ("dt-bindings: touchscreen: Add touchscreen
schema") touchscreen.txt is no longer needed, and since no other file
refers to it, it can be safely removed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250925153144.4082786-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The clamp() macro explicitly expresses the intent of constraining a value
within bounds.Therefore, replacing max(min(a,b),c) with clamp(val, lo, hi)
can improve code readability.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The parent function ext4_xattr_inode_lookup_create already uses GFP_NOFS for memory alloction, so the function ext4_xattr_inode_cache_find should use same gfp_flag.
Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
task_work selftest does not properly handle cleanup during failures:
* destroy bpf_link
* perf event fd is passed to bpf_link, no need to close it if link was
created successfully
* goto cleanup if fork() failed, close pipe.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250924142954.129519-2-mykyta.yatsenko5@gmail.com
devm_kcalloc() may fail. ndtest_probe() allocates three DMA address
arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses
them in ndtest_nvdimm_init(), which can lead to a NULL pointer
dereference under low-memory conditions.
Check all three allocations and return -ENOMEM if any allocation fails,
jumping to the common error path. Do not emit an extra error message
since the allocator already warns on allocation failure.
Fixes: 9399ab61ad ("ndtest: Add dimms to the two buses")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Utilize scoped based resource management to clean up the code and
and remove gotos for the __nd_ioctl() function.
Change allocation of 'buf' to use kvzalloc() in order to use
vmalloc() memory when needed and also zero out the allocated
memory.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
