A DRM File is the DRM counterpart to a kernel file structure,
representing an open DRM file descriptor.
Add a Rust abstraction to allow drivers to implement their own File types
that implement the DriverFile trait.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-7-dakr@kernel.org
[ Rework of drm::File
* switch to the Opaque<T> type
* fix (mutable) references to struct drm_file (which in this context
is UB)
* restructure and rename functions to align with common kernel
schemes
* write and fix safety and invariant comments
* remove necessity for and convert 'as' casts
* original source archive: https://archive.is/GH8oy
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the DRM driver `Registration`.
The `Registration` structure is responsible to register and unregister a
DRM driver. It makes use of the `Devres` container in order to allow the
`Registration` to be owned by devres, such that it is automatically
dropped (and the DRM driver unregistered) once the parent device is
unbound.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-6-dakr@kernel.org
[ Rework of drm::Registration
* move VTABLE to drm::Device to prevent use-after-free bugs; VTABLE
needs to be bound to the lifetime of drm::Device, not the
drm::Registration
* combine new() and register() to get rid of the registered boolean
* remove file_operations
* move struct drm_device creation to drm::Device
* introduce Devres
* original source archive: https://archive.is/Pl9ys
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the abstraction for a `struct drm_device`.
A `drm::Device` creates a static const `struct drm_driver` filled with
the data from the `drm::Driver` trait implementation of the actual
driver creating the `drm::Device`.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-5-dakr@kernel.org
[ Rewrite of drm::Device
* full rewrite of the drm::Device abstraction using the subclassing
pattern
* original source archive: http://archive.today/5NxBo
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Let's use the pci/platform-specialized functions for mapping a resource,
and pass the mapped address to intel_spi_probe. Benefits are:
- No separate call needed for getting the resource, and no access to
struct pci_dev internals (pdev->resource[]).
- More user-friendly output in /proc/iomem. In my case:
before
80704000-80704fff : 0000:00:1f.5
80704000-80704fff : 0000:00:1f.5 0000:00:1f.5
after
80704000-80704fff : 0000:00:1f.5
80704000-80704fff : spi_intel_pci
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/2585fa05-60c4-48c4-a838-e87014665ae2@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas MSIOF (Clock-Synchronized Serial Interface with FIFO) can work as
both SPI and I2S. MSIOF-I2S will use Audio Graph Card/Card2 driver which
Of-Graph in DT.
MSIOF-SPI/I2S are using same DT compatible properties.
MSIOF-I2S uses Of-Graph for Audio-Graph-Card/Card2,
MSIOF-SPI doesn't use Of-Graph.
Check "port" node when driver probing
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/87wmbi2x0g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sh_msiof_spi_probe() is using priv->dev everywhere,
but it makes code long. Create struct device *dev and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/87y0vy2x0o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://patch.msgid.link/20250424010855.2662-1-liubo03@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the references to Cirrus Logic files under include/sound to be a
wildcard of all cs* and use X: to exclude the three cs* files that are not
related to ASoC.
This means that new Cirrus Logic files added to include/sound will be
picked up automatically as an ASoC file without any changes to MAINTAINERS.
New files are most likely to be for ASoC drivers now.
It's also easier to manage than ranges of wildcarding for different sets of
files.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250423192714.22158-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit c141ecc3ce ("of: Warn when of_property_read_bool() is used on
non-boolean properties") added a warning when trying to parse a property
with a value (boolean properties are defined as: absent = false, present
without any value = true). This causes a warning from meson-card-utils.
meson-card-utils needs to know about the existence of the
"audio-routing" and/or "audio-widgets" properties in order to properly
parse them. Switch to of_property_present() in order to silence the
following warning messages during boot:
OF: /sound: Read of boolean property 'audio-routing' with a value.
OF: /sound: Read of boolean property 'audio-widgets' with a value.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250419213448.59647-1-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec driver data is allocated using kzalloc() so there's no need to
clear the mux setup flag when mux selection fails during probe.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250415074145.7202-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change added support for looking up an optional mux control
before falling back to gpio control for us-euro plug selection.
The mux framework does however not yet support optional muxes and an
error message is now incorrectly logged on machines like the Lenovo
ThinkPad X13s which do not have one:
wcd938x_codec audio-codec: /audio-codec: failed to get mux-control (0)
Suppress the bogus error and add the missing mux error handling by
making sure that the 'mux-controls' DT property is present before
looking up the mux control.
Fixes: eec611d26f ("ASoC: codecs: wcd938x: add mux control support for hp audio mux")
Link: https://lore.kernel.org/lkml/Z-z_ZAyVBK5ui50k@hovoldconsulting.com/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250415074145.7202-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor with default
polarity GPIOD_OUT_LOW, set consumer name.
- Use gpiod_set_value to configure output value.
Checking the DTS polarity, all users are using GPIOD_ACTIVE_HIGH.
so all should work as expected with this patch.
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250414-asoc-tpa6130a2-v1-3-5f4052e656a0@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The qcom_spi_block_erase() function returns with error in case of
failure. Change the qcom_spi_send_cmdaddr() function to propagate
these errors to the callers instead of returning with success.
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20250423-qpic-snand-propagate-error-v1-1-4b26ed45fdb5@gmail.com
Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the latest kernel versions system crashes were noticed occasionally
during suspend/resume. This occurs because the RZ SSI suspend trigger
(called from snd_soc_suspend()) is executed after rz_ssi_pm_ops->suspend()
and it accesses IP registers. After the rz_ssi_pm_ops->suspend() is
executed the IP clocks are disabled and its reset line is asserted.
Since snd_soc_suspend() is invoked through snd_soc_pm_ops->suspend(),
snd_soc_pm_ops is associated with soc_driver (defined in
sound/soc/soc-core.c), and there is no parent-child relationship between
soc_driver and rz_ssi_driver the power management subsystem does not
enforce a specific suspend/resume order between the RZ SSI platform driver
and soc_driver.
To ensure that the suspend/resume function of rz-ssi is executed after
snd_soc_suspend(), use NOIRQ_SYSTEM_SLEEP_PM_OPS().
Fixes: 1fc778f7c8 ("ASoC: renesas: rz-ssi: Add suspend to RAM support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20250410141525.4126502-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement the DRM driver abstractions.
The `Driver` trait provides the interface to the actual driver to fill
in the driver specific data, such as the `DriverInfo`, driver features
and IOCTLs.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-4-dakr@kernel.org
[ MISC changes
* remove unnecessary DRM features; make remaining ones crate private
* add #[expect(unused)] to avoid warnings
* add sealed trait
* remove shmem::Object references
* original source archive: https://archive.is/Pl9ys
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
DRM drivers need to be able to declare which driver-specific ioctls they
support. Add an abstraction implementing the required types and a helper
macro to generate the ioctl definition inside the DRM driver.
Note that this macro is not usable until further bits of the abstraction
are in place (but it will not fail to compile on its own, if not called).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-3-dakr@kernel.org
[ MISC fixes
* wrap raw_data in Opaque to avoid UB when creating a reference
* fix IOCTL sample declaration
* fix safety comment of IOCTL argument
* original source archive: https://archive.is/LqHDQ
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In the Rust DRM device abstraction we need to allocate a struct
drm_device.
Currently, there are two options, the deprecated drm_dev_alloc() (which
does not support subclassing) and devm_drm_dev_alloc(). The latter
supports subclassing, but also manages the initial reference through
devres for the parent device.
In Rust we want to conform with the subclassing pattern, but do not want
to get the initial reference managed for us, since Rust has its own,
idiomatic ways to properly deal with it.
There are two options to achieve this.
1) Allocate the memory ourselves with a KBox.
2) Implement __drm_dev_alloc(), which supports subclassing, but is
unmanged.
While (1) would be possible, it would be cumbersome, since it would
require exporting drm_dev_init() and drmm_add_final_kfree().
Hence, go with option (2) and implement __drm_dev_alloc().
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The temperature sensor enabled for mv88q222x devices also functions for
mv88q211x based devices. Unify the two devices probe functions to enable
the sensors for all devices supported by this driver.
The same oddity as for mv88q222x devices exists, the PHY link must be up
for a correct temperature reading to be reported.
# cat /sys/class/hwmon/hwmon9/temp1_input
-75000
# ifconfig end5 up
# cat /sys/class/hwmon/hwmon9/temp1_input
59000
Worth noting is that while the temperature register offsets and layout
are the same between mv88q211x and mv88q222x devices their names in the
datasheets are different. This change keeps the mv88q222x names for the
mv88q211x support.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250418145800.2420751-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds HID_QUIRK_ALWAYS_POLL for the ADATA XPG wireless gaming mouse (USB ID 125f:7505) and its USB dongle (USB ID 125f:7506). Without this quirk, the device does not generate input events properly.
Signed-off-by: Milton Barrera <miltonjosue2001@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Variable connected is not effectively used, so delete it.
drivers/hid/hid-steam.c:1153:7: warning: variable ‘connected’ set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=20462
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
For convenience of users, return back the pointer to the opp_table from
dev_pm_opp_get_opp_table_ref(), so they can do:
opp_table = dev_pm_opp_get_opp_table_ref(tmp_table);
No intentional functional impact.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
For convenience of users, return back the pointer to the opp from
dev_pm_opp_get(), so they can do:
opp = dev_pm_opp_get(tmp_opp);
No intentional functional impact.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Apple Touch Bar is only present on x86 MacBook Pros. Hence add a
dependency on X86, to prevent asking the user about this driver when
configuring a kernel for a different architecture.
Fixes: 1fd41e5e3d ("HID: hid-appletb-bl: add driver for the backlight of Apple Touch Bars")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Apple Touch Bar is only present on x86 MacBook Pros. Hence add a
dependency on X86, to prevent asking the user about this driver when
configuring a kernel for a different architecture.
Fixes: 8e9b9152cf ("HID: hid-appletb-kbd: add driver for the keyboard mode of Apple Touch Bars")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use secs_to_jiffies() instead of msecs_to_jiffies() and avoid scaling
the module params 'appletb_tb_idle_timeout' and 'appletb_tb_dim_timeout'
to milliseconds. secs_to_jiffies() expands to simpler code and reduces
the size of 'hid-appletb-kbd.ko'.
Reformat the code to silence multiple checkpatch warnings.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
SRA sensor doesn't allocate any memory for reports. Skip
trying to clear memory for that sensor in cleanup path.
Suggested-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On systems that only have an SRA sensor connected to SFH the sensor
doesn't get enabled due to a bad optimization condition of breaking
the sensor walk loop.
This optimization is unnecessary in the first place because if there
is only one device then the loop only runs once. Drop the condition
and explicitly mark sensor as enabled.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Fixes: d1c444b471 ("HID: amd_sfh: Add support to export device operating states")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Don't populate the read-only arrays frequency and frequency_div on
the stack at run time, instead make them static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
During wacom_parse_and_register() the code calls wacom_devm_kfifo_alloc
to allocate a fifo. During this operation it passes kfifo_alloc a
fifo_size of 0. Kfifo attempts to round the size passed to it to the
next power of 2 via roundup_pow_of_two (queue-type data structures
do this to maintain efficiency of operations).
However during this phase a problem arises when the roundup_pow_of_two()
function utilises a shift exponent of fls_long(n-1), where n is the
fifo_size. Since n is 0 in this case and n is also an unsigned long,
doing n-1 causes unsigned integer wrap-around to occur making the
fifo_size 4294967295. So the code effectively does fls_long(4294967295)
which results in 64. Returning back to roundup_pow_of_two(), the code
utilises a shift exponent of 64. When a shift exponent of 64 is used
on a 64-bit type such as 1UL it results in a shift-out-of-bounds.
The root cause of the issue seems to stem from insufficient validation
of wacom_compute_pktlen(), since in this case the fifo_size comes
from wacom_wac->features.pktlen. During wacom_parse_and_register()
the wacom_compute_pktlen() function sets the pktlen as 0.
To fix this, we should handle cases where wacom_compute_pktlen()
results in 0.
Reported-by: syzbot <syzbot+d5204cbbdd921f1f7cad@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=d5204cbbdd921f1f7cad
Fixes: 5e013ad206 ("HID: wacom: Remove static WACOM_PKGLEN_MAX limit")
Tested-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
uclogic_input_configured() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: dd613a4e45 ("HID: uclogic: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Allwinner H6 and some later SoCs contain some bits in the PRCM (Power
Reset Clock Management) block that control some power domains.
Those power domains include the one for the GPU, the PLLs and some
analogue circuits.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416224839.9840-2-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch adds support for USB-C model of Apple Magic Mouse 2.
Except for the hardware ID, it should resemble the existing configuration
for the older Magic Mouse 2.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
All IMG Rogue GPUs include a reset line that participates in the
power-up sequence. On some SoCs (e.g., T-Head TH1520 and Banana Pi
BPI-F3), this reset line is exposed and must be driven explicitly to
ensure proper initialization. On others, such as the currently
supported TI SoC, the reset logic is handled in hardware or firmware
without exposing the line directly. In platforms where the reset line is
externally accessible, if it is not driven correctly, the GPU may remain
in an undefined state, leading to instability or performance issues.
This commit adds a dedicated reset controller to the drm/imagination
driver. By managing the reset line (where applicable) as part of normal
GPU bring-up, the driver ensures reliable initialization across
platforms regardless of whether the reset is controlled externally or
handled internally.
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250418-apr_18_reset_img-v6-2-85a06757b698@samsung.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Simplify the code by using the lock guards from linux/cleanup.h
throughout the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
We currently take the lock, set direction to output, release it,
reacquire it and set the desired value. That doesn't look correct.
Introduce a helper function that sets the value without taking the lock
and use it where applicable in order to combine the critical sections.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use the devres variant of mutex_init() in order to free resources
allocated with mutex debugging enabled.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
All IMG Rogue GPUs include a reset line that participates in the
power-up sequence. On some SoCs (e.g., T-Head TH1520 and Banana Pi
BPI-F3), this reset line is exposed and must be driven explicitly to
ensure proper initialization.
To support this, add a 'resets' property to the GPU device tree
bindings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250418-apr_18_reset_img-v6-1-85a06757b698@samsung.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
In wacom_wac_queue_flush() the code allocates zero initialised
buffer which it uses as a storage buffer for copying data from
a fifo via kfifo_out(). The kfifo_out() function returns the
number of elements it has copied. The code checks if the number
of copied elements does not equal the size of the fifo record,
if it does not it simply skips the entry and continues to the
next iteration. However it does not release the storage buffer
leading to a memory leak.
Fix the memory leak by freeing the buffer on size mismatch.
Fixes: 5e013ad206 ("HID: wacom: Remove static WACOM_PKGLEN_MAX limit")
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
