When pausing rx (e.g. set up xdp, xsk pool, rx resize), we call
napi_disable() on the receive queue's napi. In delayed refill_work, it
also calls napi_disable() on the receive queue's napi. When
napi_disable() is called on an already disabled napi, it will sleep in
napi_disable_locked while still holding the netdev_lock. As a result,
later napi_enable gets stuck too as it cannot acquire the netdev_lock.
This leads to refill_work and the pause-then-resume tx are stuck
altogether.
This scenario can be reproducible by binding a XDP socket to virtio-net
interface without setting up the fill ring. As a result, try_fill_recv
will fail until the fill ring is set up and refill_work is scheduled.
This commit adds virtnet_rx_(pause/resume)_all helpers and fixes up the
virtnet_rx_resume to disable future and cancel all inflights delayed
refill_work before calling napi_disable() to pause the rx.
Fixes: 413f0271f3 ("net: protect NAPI enablement with netdev_lock()")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250417072806.18660-2-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A network restart test on a router led to an out-of-memory condition,
which was traced to a memory leak in the PHY LED trigger code.
The root cause is misuse of the devm API. The registration function
(phy_led_triggers_register) is called from phy_attach_direct, not
phy_probe, and the unregister function (phy_led_triggers_unregister)
is called from phy_detach, not phy_remove. This means the register and
unregister functions can be called multiple times for the same PHY
device, but devm-allocated memory is not freed until the driver is
unbound.
This also prevents kmemleak from detecting the leak, as the devm API
internally stores the allocated pointer.
Fix this by replacing devm_kzalloc/devm_kcalloc with standard
kzalloc/kcalloc, and add the corresponding kfree calls in the unregister
path.
Fixes: 3928ee6485 ("net: phy: leds: Add support for "link" trigger")
Fixes: 2e0bc452f4 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Hao Guan <hao.guan@siflower.com.cn>
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250417032557.2929427-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC 15's new -Wunterminated-string-initialization notices that the 32
character "flash_cookie" (which is not used as a C-String)
needs to be marked as "nonstring":
drivers/net/ethernet/emulex/benet/be_cmds.c:2618:51: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
2618 | static char flash_cookie[2][16] = {"*** SE FLAS", "H DIRECTORY *** "};
| ^~~~~~~~~~~~~~~~~~
Add this annotation, avoid using a multidimensional array, but keep the
string split (with a comment about why). Additionally mark it const
and annotate the "cookie" member that is being memcmp()ed against as
nonstring too.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416221028.work.967-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a result of an email from the fbnic author, I reviewed the phylink
documentation, and I have decided to clarify the wording in the
mac_link_(up|down)() kernel documentation as this was written from the
point of view of mvneta/mvpp2 and is misleading.
The documentation talks about forcing the link - indeed, this is what
is done in the mvneta and mvpp2 drivers but not at the physical layer
but the MACs idea, which has the effect of only allowing or stopping
packet flow at the MAC. This "link" needs to be controlled when using
a PHY or fixed link to start or stop packet flow at the MAC. However,
as the MAC and PCS are tightly integrated, if the MACs idea of the
link is forced down, it has the side effect that there is no way to
determine that the media link has come up - in this mode, the MAC must
be allowed to follow its built-in PCS so we can read the link state.
Frame the documentation in more generic terms, to avoid the thought
that the physical media link to the partner needs in some way to be
forced up or down with these calls; it does not. If that were to be
done, it would be a self-fulfilling prophecy - e.g. if the media link
goes down, then mac_link_down() will be called, and if the media link
is then placed into a forced down state, there is no possibility
that the media link will ever come up again - clearly this is a wrong
interpretation.
These methods are notifications to the MAC about what has happened to
the media link state - either from the PHY, or a PCS, or whatever
mechanism fixed-link is using. Thus, reword them to get away from
talking about changing link state to avoid confusion with media link
state.
This is not a change of any requirements of these methods.
Also, remove the obsolete references to EEE for these methods, we now
have the LPI functions for configuring the EEE parameters which
renders this redundant, and also makes the passing of "phy" to the
mac_link_up() function obsolete.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1u5Ah5-001GO1-7E@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dp83822 provides the possibility to set the resistance value of the
the MAC termination. Modifying the resistance to an appropriate value can
reduce signal reflections and therefore improve signal quality.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250416-dp83822-mac-impedance-v3-4-028ac426cddb@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helper which returns the MAC termination resistance value. Modifying
the resistance to an appropriate value can reduce signal reflections and
therefore improve signal quality.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250416-dp83822-mac-impedance-v3-3-028ac426cddb@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Property mac-termination-ohms is defined in ethernet-phy.yaml. Add allowed
values for the property.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250416-dp83822-mac-impedance-v3-2-028ac426cddb@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add property mac-termination-ohms in the device tree bindings for selecting
the resistance value of the builtin series termination resistors of the
PHY. Changing the resistance to an appropriate value can reduce signal
reflections and therefore improve signal quality.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250416-dp83822-mac-impedance-v3-1-028ac426cddb@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use pci_prepare_to_sleep() like PCI core does in pci_pm_suspend_noirq.
This aligns setting a low-power mode during shutdown with the handling
of the transition to system suspend. Also the transition to runtime
suspend uses pci_target_state() instead of setting D3hot unconditionally.
Note: pci_prepare_to_sleep() uses device_may_wakeup() to check whether
device may generate wakeup events. So we don't lose anything by
not passing tp->saved_wolopts any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/f573fdbd-ba6d-41c1-b68f-311d3c88db2c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last use of rvu_npc_enable_bcast_entry() was removed in 2021 by
commit 967db3529e ("octeontx2-af: add support for multicast/promisc
packet replication feature")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250420225810.171852-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Feng Yang says:
====================
libbpf: Fix event name too long error and add tests
From: Feng Yang <yangfeng@kylinos.cn>
Hi everyone,
This series tries to fix event name too long error and add tests.
When the binary path is excessively long, the generated probe_name in libbpf
exceeds the kernel's MAX_EVENT_NAME_LEN limit (64 bytes).
This causes legacy uprobe event attachment to fail with error code -22.
The fix reorders the fields to place the unique ID before the name.
This ensures that even if truncation occurs via snprintf, the unique ID
remains intact, preserving event name uniqueness. Additionally, explicit
checks with MAX_EVENT_NAME_LEN are added to enforce length constraints.
Acked-by: Jiri Olsa <jolsa@kernel.org>
---
Changes in v5:
- use strrchr instead of basename.
- kprobe_test add __weak. Thanks, Andrii Nakryiko!
- Link to v4: https://lore.kernel.org/all/20250415093907.280501-1-yangfeng59949@163.com/
Changes in v4:
- add changelog.
- gen_uprobe_legacy_event_name and gen_kprobe_legacy_event_name are combined into a function
- kprobe_test use normal module function. Thanks, Jiri Olsa!
- Link to v3: https://lore.kernel.org/bpf/20250414093402.384872-1-yangfeng59949@163.com/
Changes in v3:
- add __sync_fetch_and_add(&index) and let snprintf() do the trimming. Thanks, Andrii Nakryiko!
- add selftests.
- Link to v2: https://lore.kernel.org/all/20250411080545.319865-1-yangfeng59949@163.com/
Changes in v2:
- Use basename() and %.32s to fix. Thanks, Hengqi Chen!
- Link to v1: https://lore.kernel.org/all/20250410052712.206785-1-yangfeng59949@163.com/
====================
Link: https://patch.msgid.link/20250417014848.59321-1-yangfeng59949@163.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
When WoL is enabled, we update the software state in phylink to
indicate that the link is down, and disable the resolver from
bringing the link back up.
On resume, we attempt to bring the overall state into consistency
by calling the .mac_link_down() method, but this is wrong if the
link was already down, as phylink strictly orders the .mac_link_up()
and .mac_link_down() methods - and this would break that ordering.
Fixes: f97493657c ("net: phylink: add suspend/resume support")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u55Qf-0016RN-PA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If lt9611uxc_audio_init() fails, some resources still need to be released
before returning the error code.
Use the existing error handling path.
Fixes: 0cbbd5b1a0 ("drm: bridge: add support for lontium LT9611UXC bridge")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/f167608e392c6b4d7d7f6e45e3c21878feb60cbd.1744958833.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Static analysis found an issue in bench_htab_mem.c and sk_assign.c
cppcheck output before this patch:
tools/testing/selftests/bpf/benchs/bench_htab_mem.c:284:3: error: Resource leak: fd [resourceLeak]
tools/testing/selftests/bpf/prog_tests/sk_assign.c:41:3: error: Resource leak: tc [resourceLeak]
cppcheck output after this patch:
No resource leaks found
Fix the issue by closing the file descriptors fd and tc.
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250421174405.26080-1-malayarout91@gmail.com
[Why]
Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.
RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.
[How]
Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.
Fixes: 199888aa25 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f772d79ef)
Cc: stable@vger.kernel.org
[Why/How]
LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read
reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier
may not support this register, assume the mandatory value is programmed
by the LTTPR to avoid AUX timeout issues.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1594b60d74)
[Why]
The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but
dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd
block index starts after 255, so it can't be indexed properly.
This leads to problems with the display when the EDID is parsed.
[How]
Change the variable type to 'short' so that larger values can be indexed.
Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com>
Reported-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: David Ober <dober@lenovo.com>
Fixes: c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a918bb4a90)
Cc: stable@vger.kernel.org
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 372c8d72c3)
[Why]
Urgent latency adjustment was disabled on DCN35 due to issues with P0
enablement on some platforms. Without urgent latency, underflows occur
when doing certain high timing configurations. After testing, we found
that reenabling urgent latency didn't reintroduce p0 support on multiple
platforms.
[How]
renable urgent latency on DCN35 and setting it to 3000 Mhz.
This reverts commit 3412860cc4.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <nsusanto@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd74ce1f0c)
[Why]
While system undergoing gpu reset always do full update
to sync the dc state before and after reset.
[How]
Return true in should_reset_plane() if gpu reset detected
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ba8619b9a)
Cc: stable@vger.kernel.org
[Why]
The indexing of stream_status in dm_gpureset_commit_state() is incorrect.
That leads to asserts in multi-display configuration after gpu reset.
[How]
Adjust the indexing logic to align stream_status with surface_updates.
Fixes: cdaae8371a ("drm/amd/display: Handle GPU reset for DC block")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d91bc90139)
Cc: stable@vger.kernel.org
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05185812ae)
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3940796a6e)
security_netlink_send() is a networking hook, so it fits better under
CONFIG_SECURITY_NETWORK.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
a11d6784d7 ("sched_ext: Fix missing rq lock in scx_bpf_cpuperf_set()")
added a call to scx_ops_error() which was renamed to scx_error() in
for-6.16. Fix it up.
scx_bpf_cpuperf_set() can be used to set a performance target level on
any CPU. However, it doesn't correctly acquire the corresponding rq
lock, which may lead to unsafe behavior and trigger the following
warning, due to the lockdep_assert_rq_held() check:
[ 51.713737] WARNING: CPU: 3 PID: 3899 at kernel/sched/sched.h:1512 scx_bpf_cpuperf_set+0x1a0/0x1e0
...
[ 51.713836] Call trace:
[ 51.713837] scx_bpf_cpuperf_set+0x1a0/0x1e0 (P)
[ 51.713839] bpf_prog_62d35beb9301601f_bpfland_init+0x168/0x440
[ 51.713841] bpf__sched_ext_ops_init+0x54/0x8c
[ 51.713843] scx_ops_enable.constprop.0+0x2c0/0x10f0
[ 51.713845] bpf_scx_reg+0x18/0x30
[ 51.713847] bpf_struct_ops_link_create+0x154/0x1b0
[ 51.713849] __sys_bpf+0x1934/0x22a0
Fix by properly acquiring the rq lock when possible or raising an error
if we try to operate on a CPU that is not the one currently locked.
Fixes: d86adb4fc0 ("sched_ext: Add cpuperf support")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some kfuncs provided by sched_ext may need to operate on a struct rq,
but they can be invoked from various contexts, specifically, different
scx callbacks.
While some of these callbacks are invoked with a particular rq already
locked, others are not. This makes it impossible for a kfunc to reliably
determine whether it's safe to access a given rq, triggering potential
bugs or unsafe behaviors, see for example [1].
To address this, track the currently locked rq whenever a sched_ext
callback is invoked via SCX_CALL_OP*().
This allows kfuncs that need to operate on an arbitrary rq to retrieve
the currently locked one and apply the appropriate action as needed.
[1] https://lore.kernel.org/lkml/20250325140021.73570-1-arighi@nvidia.com/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
MIPS documents are not provided at imgtec.com any more.
Get rid of useless link.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Fix trivial typos including:
- Repeated "a call to"
- Inconsistent forms of referencing functions of rcu_dereference()
and rcu_assign_pointer()
- Past tense used in describing normal behavior
and other minor ones.
[ paulmck: Wordsmith plus recent LWN RCU API URL. ]
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Commit 9bc931e9e1 ("tools/memory-model: Add locking.txt and
glossary.txt to README") failed to mention the relation of the "Locking"
section in recipes.txt and locking.txt.
The latter is a detailed version of the former intended to be read on
its own.
Reword the description in README and add notes in locking.txt and
recipes.txt to clarify their relationship.
[ paulmck: Wordsmithing. ]
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Use `\t(\{ ?\},|\{\}|\{\s*/\*.*\*/\s*\},?)$` regex to find and replace
the array sentinel in all IIO drivers to the same style.
For some time, we've been trying to consistently use `{ }` (no trailing
comma, no comment, one space between braces) for array sentinels in the
IIO subsystem. Still nearly 50% of existing code uses a different style.
To save reviewers from having to request this trivial change as
frequently, let's normalize the style in all existing IIO drivers.
At least when code is copy/pasted to new drivers, the style will be
consistent.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250411-iio-sentinel-normalization-v1-1-d293de3e3d93@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change moves the buffer allocation and related trigger allocation
in a separate function, making space for adding another type of iio
buffer if needed.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/11c1777b406875ce1a7216dc4b094ff99af8da7f.1744325346.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the AD7768-1 driver to use the regmap API for register
access. This change simplifies and standardizes register interactions,
reducing code duplication and improving maintainability.
Create two regmap configurations, one for 8-bit register values and
other for 24-bit register values.
Since we are using regmap now, define the remaining registers from 0x32
to 0x34.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/aec9e5452c1ac16d5379a80dfce97c00d85614a2.1744325346.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix Smatch-detected issue:
drivers/iio/adc/ad_sigma_delta.c:604 ad_sd_trigger_handler() error:
uninitialized symbol 'status_pos'.
The variable `status_pos` was only initialized in specific switch cases
(1, 2, 3, 4), which could leave it uninitialized if `reg_size` had an
unexpected value.
Fix by adding a default case to the switch block to catch unexpected
values of `reg_size`. Use `dev_err_ratelimited()` for error logging and
`goto irq_handled` instead of returning early.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Link: https://patch.msgid.link/20250410170408.8585-1-purvayeshi550@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad3552r can be feeded from the HDL controller by an internally
generated 16bit ramp, useful for debug pourposes. Add debugfs a file
to enable or disable it.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250409-wip-bl-ad3552r-fixes-v5-5-fb429c3a6515@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add backend support for getting the data source used.
The ad3552r HDL implements an internal ramp generator, so adding the
getter to allow data source get/set by debugfs.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250409-wip-bl-ad3552r-fixes-v5-3-fb429c3a6515@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for ad3552r driver, needed to describe the high-speed
driver debugfs attributes and shows how the user may use them.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250409-wip-bl-ad3552r-fixes-v5-2-fb429c3a6515@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use generic fwnode_irq_get_byname() for getting interrupt pin using
interrupt name. Only INT1 is supported by the driver currently.
If not found fallback to first defined interrupt to keep compatibility.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250410-iio-imu-inv-icm42600-rework-interrupt-using-names-v4-2-19e4e2f8f7eb@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add interrupt-names field for specifying interrupt pin configured.
Chips are supporting up to 2 interrupt pins with configurable interrupt
sources. Change interrupt to support 1 or 2 entries.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250410-iio-imu-inv-icm42600-rework-interrupt-using-names-v4-1-19e4e2f8f7eb@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BD79104 ADC has identical SPI communication logic as the
ti-adc128s052. Eg, SPI transfer should be 16 clk cycles, conversion is
started when the CS is pulled low, and channel selection is done by
writing the channel ID after two zero bits. Data is contained in
big-endian format in the last 12 bits.
The BD79104 has two input voltage pins. Data sheet uses terms "vdd" and
"iovdd". The "vdd" is used also as an analog reference voltage. Hence
the driver expects finding these from the device-tree, instead of having
the "vref" only as TI's driver.
NOTE: The TI's data sheet[1] does show that the TI's IC does actually
have two voltage inputs as well. Pins are called Va (analog reference)
and Vd (digital supply pin) - but I keep the existing driver behaviour
for the TI's IC "as is", because I have no HW to test changes, and
because I have no real need to touch it.
NOTE II: The BD79104 requires SPI MODE 3.
NOTE III: I used evaluation board "BD79104FV-EVK-001" made by ROHM. With
this board I had to drop the SPI speed below the 20M which is mentioned
in the data-sheet [2]. This, however, may be a limitation of the EVK
board, not the component itself.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Datasheet: https://www.ti.com/lit/ds/symlink/adc128s052.pdf # [1]
Datasheet: https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79104fv-la-e.pdf # [2]
Link: https://patch.msgid.link/36ffa72cbdf8dbbdf1e612040db82ebcdf73fa24.1744022065.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
