Add support for hardware-wrapped keys to fscrypt. Such keys are
protected from certain attacks, such as cold boot attacks. For more
information, see the "Hardware-wrapped keys" section of
Documentation/block/inline-encryption.rst.
To support hardware-wrapped keys in fscrypt, we allow the fscrypt master
keys to be hardware-wrapped. File contents encryption is done by
passing the wrapped key to the inline encryption hardware via
blk-crypto. Other fscrypt operations such as filenames encryption
continue to be done by the kernel, using the "software secret" which the
hardware derives. For more information, see the documentation which
this patch adds to Documentation/filesystems/fscrypt.rst.
Note that this feature doesn't require any filesystem-specific changes.
However it does depend on inline encryption support, and thus currently
it is only applicable to ext4 and f2fs.
The version of this feature introduced by this patch is mostly
equivalent to the version that has existed downstream in the Android
Common Kernels since 2020. However, a couple fixes are included.
First, the flags field in struct fscrypt_add_key_arg is now placed in
the proper location. Second, key identifiers for HW-wrapped keys are
now derived using a distinct HKDF context byte; this fixes a bug where a
raw key could have the same identifier as a HW-wrapped key. Note that
as a result of these fixes, the version of this feature introduced by
this patch is not UAPI or on-disk format compatible with the version in
the Android Common Kernels, though the divergence is limited to just
those specific fixes. This version should be used going forwards.
This patch has been heavily rewritten from the original version by
Gaurav Kashyap <quic_gaurkash@quicinc.com> and
Barani Muthukumaran <bmuthuku@codeaurora.org>.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650
Link: https://lore.kernel.org/r/20250404225859.172344-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The rtw88 module names all start with the "rtw88_" prefix, but the
messages in dmesg mostly use the "rtw_" prefix. The messages from
rtw88_8723cs don't even have the underscore.
Use the KBUILD_MODNAME macro in every driver. This ensures that the
messages in dmesg will always use the module name.
Before:
Mar 17 15:54:19 ideapad2 kernel: rtw_8814au 2-4:1.0: Firmware version 33.6.0, H2C version 6
After:
Mar 17 16:33:35 ideapad2 kernel: rtw88_8814au 2-4:1.0: Firmware version 33.6.0, H2C version 6
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/29cd29ba-bc51-4d5b-ad48-a43c6ce72d56@gmail.com
Tell the chip the maximum AMPDU size supported by the AP. This greatly
improves the TX speed of RTL8814AU in the 2.4 GHz band. Before: ~90
Mbps. After: ~300 Mbps.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/4edc2a63-81b3-431c-9a37-5a7d899a6cc2@gmail.com
Let the chip transfer several frames in a single USB Request Block.
This is supposed to improve the RX speed.
It can use the same code used for RTL8822CU, RTL8822BU, and RTL8821CU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/672397ac-dd4d-4420-8b3e-7011578e2243@gmail.com
The Realtek wifi 5 devices which support USB 3 are weird: when first
plugged in, they pretend to be USB 2. The driver needs to send some
commands to the device, which make it disappear and come back as a
USB 3 device.
The method used to switch the RTL8812AU also works for the RTL8814AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/d3608f70-e04f-4f6b-987a-022c8e317165@gmail.com
__skb_try_recv_from_queue() deals with a queue, @sk is not used
since commit e427cad6ee ("net: datagram: drop 'destructor'
argument from several helpers"). Remove sk from function parameters,
adapt callers.
No functional change intended.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250407-cleanup-drop-param-sk-v1-1-cd076979afac@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's quite common to have a single UDP tunnel type active in the
whole system. In such a case we can replace the indirect call for
the UDP tunnel GRO callback with a static call.
Add the related accounting in the control path and switch to static
call when possible. To keep the code simple use a static array for
the registered tunnel types, and size such array based on the kernel
config.
Note that there are valid kernel configurations leading to
UDP_MAX_TUNNEL_TYPES == 0 even with IS_ENABLED(CONFIG_NET_UDP_TUNNEL),
Explicitly skip the accounting in such a case, to avoid compile warning
when accessing "udp_tunnel_gro_types".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/53d156cdfddcc9678449e873cc83e68fa1582653.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Restrict the optimization to kernel sockets only: it covers all the
relevant use-cases, and user-space owned sockets could be disconnected
and rebound after setup_udp_tunnel_sock(), breaking the uniqueness
assumption
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/41d16bc8d1257d567f9344c445b4ae0b4a91ede4.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes tool to report test count in case of a late test plan when tests
are specified before the test plan. Fixes spelling error in the commit
that went into 6.15-rc1.
-----BEGIN PGP SIGNATURE-----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=VdOJ
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
- Fix the tool to report test count in case of a late test plan when
tests are specified before the test plan
- Fix spelling error
* tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Spelling s/slowm/slow/
kunit: tool: fix count of tests if late test plan
MS-FSCC in section 2.1.2.7 LX SYMLINK REPARSE_DATA_BUFFER now contains
documentation about WSL symlink reparse point buffers.
https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-fscc/68337353-9153-4ee1-ac6b-419839c3b7ad
Fix the struct reparse_wsl_symlink_data_buffer to reflect buffer fields
according to the MS-FSCC documentation.
Fix the Linux SMB client to correctly fill the WSL symlink reparse point
buffer when creaing new WSL-style symlink. There was a mistake during
filling the data part of the reparse point buffer. It should starts with
bytes "\x02\x00\x00\x00" (which represents version 2) but this constant was
written as number 0x02000000 encoded in little endian, which resulted bytes
"\x00\x00\x00\x02". This change is fixing this mistake.
Fixes: 4e2043be5c ("cifs: Add support for creating WSL-style symlinks")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page)
but it would still proceed to use the NULL pointer and then crash.
This is similar to commit 001ba09020
("net: fec: handle page_pool_dev_alloc_pages error").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 3c47e8ae11 ("net: libwx: Support to receive packets in NAPI")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250407184952.2111299-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Recently, during a debugging session using local MPTCP connections, I
noticed MPJoinAckHMacFailure was strangely not zero on the server side.
The first patch fixes this issue -- present since v5.9 -- and the second
one validates it in the selftests.
====================
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-0-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parent commit fixes an issue around these counters where one of them
-- MPJoinAckHMacFailure -- was wrongly incremented in some cases.
This makes sure the counter is always 0. It should be incremented only
in case of corruption, or a wrong implementation, which should not be
the case in these selftests.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-2-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, during a debugging session using local MPTCP connections, I
noticed MPJoinAckHMacFailure was not zero on the server side. The
counter was in fact incremented when the PM rejected new subflows,
because the 'subflow' limit was reached.
The fix is easy, simply dissociating the two cases: only the HMAC
validation check should increase MPTCP_MIB_JOINACKMAC counter.
Fixes: 4cf8b7e48a ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-1-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Testcase should fail if -EWOULDBLOCK is not returned when expected value
differs from actual value from the waiter.
Link: https://lore.kernel.org/r/20250404221225.1596324-1-edliaw@google.com
Fixes: 9d57f7c797 ("selftests: futex: Test sys_futex_waitv() wouldblock")
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-24-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-23-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-22-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-21-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-20-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-19-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-18-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-17-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-16-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-15-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-14-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-13-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-12-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-11-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-10-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-9-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-8-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-7-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-6-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-5-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-4-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-3-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-2-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-1-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This adds the UAPI for the Asahi driver targeting the GPU in the Apple
M1 and M2 series systems on chip. The UAPI design is based on other
modern Vulkan-capable drivers, including Xe and Panthor. Memory
management is based on explicit VM management. Synchronization is
exclusively explicit sync.
This UAPI is validated against our open source Mesa stack, which is
fully conformant to the OpenGL 4.6, OpenGL ES 3.2, OpenCL 3.0, and
Vulkan 1.4 standards. The Vulkan driver supports sparse, exercising the
VM_BIND mechanism.
This patch adds the standalone UAPI header. It is implemented by an open
source DRM driver written in Rust. We fully intend to upstream this
driver when possible. However, as a production graphics driver, it
depends on a significant number of Rust abstractions that will take a
long time to upstream. In the mean time, our userspace is upstream in
Mesa but is not allowed to probe with upstream Mesa as the UAPI is not
yet reviewed and merged in the upstream kernel. Although we ship a
patched Mesa in Fedora Asahi Remix, any containers shipping upstream
Mesa builds are broken for our users, including upstream Flatpak and
Waydroid runtimes. Additionally, it forces us to maintain forks of Mesa
and virglrenderer, which complicates bisects.
The intention in sending out this patch is for this UAPI to be
thoroughly reviewed. Once we as the DRM community are satisfied with the
UAPI, this header lands signifying that the UAPI is stable and must only
be evolved in backwards-compatible ways; it will be the UAPI implemented
in the DRM driver that eventually lands upstream. That promise lets us
enable upstream Mesa, solving all these issues while the upstream Rust
abstractions are developed.
https://github.com/alyssarosenzweig/linux/commits/agx-uapi-v7 contains
the DRM driver implementing this proposed UAPI.
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33984 contains
the Mesa patches to implement this proposed UAPI.
That Linux and Mesa branch together give a complete graphics/compute
stack on top of this UAPI.
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://lore.kernel.org/r/20250408-agx-uapi-v7-1-ad122d4f7324@rosenzweig.io
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Fix test count with late test plan.
For example,
TAP version 13
ok 1 test1
1..4
Returns a count of 1 passed, 1 crashed (because it expects tests after
the test plan): returning the total count of 2 tests
Change this to be 1 passed, 1 error: total count of 1 test
Link: https://lore.kernel.org/r/20250319223351.1517262-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Use POSIX-conformant expression operator symbol '='.
The use of the non POSIX-conformant symbol '==' would work
in bash, but not in sh where the unexpected operator error
would result in test_smoke.sh being skipped.
Instead of changing the shebang to use bash, which may not be
available on all systems, use the POSIX-conformant expression
symbol '=' to test for equality.
Without this patch:
===================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# ./test_smoke.sh: 9: [: 2: unexpected operator
ok 1 selftests: tpm2: test_smoke.sh # SKIP
With this patch:
================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# Ran 9 tests in 9.236s
ok 1 selftests: tpm2: test_smoke.sh
Link: https://lore.kernel.org/r/37ztyakgrrtgvec344mg7mspchwjpxxtsprtjidso3pwkmm4f4@awsa5mzgqmtb
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
