Updated to merge the valid bits of the two m68k patches.
This converts the m86k clocksources to use clocksource_register_hz/khz
This is untested, so any assistance in testing would be appreciated!
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The defconfig for the Integrator only include the serial drivers
for the PL010 as found in the Integrator/AP, to make sure we
don't loose the serial console we simply select both PL010 and
PL011 drivers from the Integrator Kconfig entries so they are
always included when applicable.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
We don't need to hardcode the peripheral IDs for the Integrator/CP,
the numbers found in the hardware are correct anyway.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add a req_running field to the pl330_thread to track which request (if
any) has been submitted to the DMA. This mechanism replaces the old
one in which we tried to guess the same by looking at the PC of the
DMA, which could prevent the driver from sending more requests if it
didn't guess correctly.
Reference: <1323631637-9610-1-git-send-email-javi.merino@arm.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Tested-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add default value for CONFIG_ARCH_NR_GPIO to Kconfig and remove the
definition in gpio.h. We can't remove gpio.h yet as asm/gpio.h still
includes it.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add default value for CONFIG_ARCH_NR_GPIO to Kconfig and remove the
definition in gpio.h.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Change ARCH_NR_GPIO into a Kconfig variable as suggested by Russel King.
This makes ARCH_NR_GPIO single zImage friendly. The default value for
tegra is defined as well.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This removes the hardcoded shift value and lets the clockevent core
come up with suitable mult and div factors. Tested on the
Integrator/CP.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This break-out from Colin Cross' cpufreq-aware TWD patch
will handle the case when our localtimer's clock changes with
the cpu clock. A cpufreq transtion notifier will be registered
only if the platform has supplied a specified clock to the TWD.
After a cpufreq transition, update the clockevent's frequency
by fetching the new clock rate from the clock framework and
reprogram the next clock event.
The necessary changes in the clockevents framework was done by
Thomas Gleixner in kernel v3.0.
ChangeLog v1->v2:
- Replace IS_ERR_OR_NULL() with IS_ERR() in twd_clk check.
- Update code to use the already existing per-cpu array of TWD
clockevents instead of adding cruft.
[Broke out, ifdef:ed CPUfreq stuff for non-cpufreq configs]
[Rebased to newer TWD base with per-CPU clock array]
Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This break-out from Colin Cross' cpufreq-aware TWD patch will
optionally retrieve the clock rate of the TWD from an external
clock. A variant of this patch has been proposed by Rob Herring
as well.
The basic idea is to avoid recalibrating the rate of the clock
at boot if the platform already know what rate the clock to the
TWD block has.
ChangeLog v1->v2: added clk_[prepare|unprepare] calls.
[Broke out of larger SMP TWD patch]
Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This break-out from Colin Cross' cpufreq-aware TWD patch will
just modernize the clock event registration code to use
clockevents_config_and_register().
[Broke out of larger SMP TWD patch]
Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Activation conditions for a workaround should not be encoded in the
workaround's direct dependencies if this makes otherwise reasonable
configuration choices impossible.
This patches uses the SMP/UP patching facilities instead to compile
out the workaround if the configuration means that it is definitely
not needed.
This means that configs for buggy silicon can simply select
ARM_ERRATA_751472, without preventing a UP kernel from being built
or duplicatiing knowledge about when to activate the workaround.
This seems the correct way to do things, because the erratum is a
property of the silicon, irrespective of what the kernel config
happens to be.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Activation conditions for a workaround should not be encoded in the
workaround's direct dependencies if this makes otherwise reasonable
configuration choices impossible.
The workaround for erratum 720789 only affects a code path which is
not active in UP kernels; hence it should be safe to turn on in UP
kernels, without penalty.
This patch simply removes the extra dependency on SMP from Kconfig.
This means that configs for buggy silicon can simply select
ARM_ERRATA_720789, without preventing a UP kernel from being built
or duplicatiing knowledge about when to activate the workaround.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Conflicts:
net/bluetooth/l2cap_core.c
Just two overlapping changes, one added an initialization of
a local variable, and another change added a new local variable.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces common.[ch] which are used only in the
arch/arm/mach-s5pv210/ directory. The common.c file merges
the cpu.c and init.c which are used commonly on S5PCV210/S5PC100
SoC and the common.h local header file replaces with plat/s5pv210.h
file.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch introduces common.[ch] which are used only in the
arch/arm/mach-s5pc100/ directory. The common.c file merges
the cpu.c and init.c which are used commonly on S5PC100 SoC
and the common.h local header file replaces with plat/s5pc100.h
file.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch introduces common.[ch] which are used only in the
arch/arm/mach-s5p64x0/ directory. The common.c file merges
the cpu.c, init.c and irq-eint.c files which are used commonly
on S5P64X0 SoCs and the common.h local header file replaces
with plat/s5p6440.h and plat/s5p6450.h files.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch introduces common.[ch] which are used only in the
arch/arm/mach-s3c64xx/ directory. The common.c file merges
the cpu.c, irq.c and irq-eint.c which are used commonly on
S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h
and plat/s3c6410.h files.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
If the x2apic mode is disabled for reasons like interrupt-remapping
not available etc, then we need to skip the logical cpu bringup of
apic-id's >= 255. Otherwise as the platform is in xapic mode, init/startup
IPI's will consider only the low 8-bits and there is a possibility of
re-sending init/startup IPI's to the logical cpu that is already online.
This will avoid potential reboots/unpredictable behavior etc.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20111222014632.702932458@sbsiddha-desk.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently "nox2apic" boot parameter was not enabling x2apic mode if the cpu,
kernel are all capable of enabling x2apic mode and the OS handover
happened in xapic mode.
However If the bios enabled x2apic prior to OS handover, using "nox2apic"
boot parameter had no effect.
If the boot cpu's apicid is < 255, enable "nox2apic" boot parameter to
disable the x2apic mode setup by the bios. This will enable the kernel to
fallback to xapic mode and bringup only the cpu's which has apic-id < 255.
-v2: fix patch error and two compiling warning
make disable_x2apic to be __init
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/CAE9FiQUeB-3uxJAMiHsz=uPWoFv5Hg1pVepz7aU6YtqOxMC-=Q@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
On some of the recent Intel SNB platforms, by default bios is pre-enabling
x2apic mode in the cpu with out setting up interrupt-remapping.
This case was resulting in the kernel to panic as the cpu is already in
x2apic mode but the OS was not able to enable interrupt-remapping (which
is a pre-req for using x2apic capability).
On these platforms all the apic-ids are < 255 and the kernel can fallback to
xapic mode if the bios has not enabled interrupt-remapping (which is
mostly the case if the bios has not exported interrupt-remapping tables to the
OS).
Reported-by: Berck E. Nash <flyboy@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.600418637@sbsiddha-desk.sc.intel.com
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
If the x2apic feature is not present (either the cpu is not capable of it
or the user has disabled the feature using boot-parameter etc), ignore the
x2apic MADT and SRAT entries provided by the ACPI tables.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.540896503@sbsiddha-desk.sc.intel.com
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently we start with the default apic_flat mode and switch to some other
apic model depending on the apic drivers acpi_madt_oem_check() routines and
later followed by the apic drivers probe() routines.
Once we selected non flat mode there was no case where we fall back to
flat mode again.
Upcoming changes allow bios-enabled x2apic mode to be disabled by the OS
if interrupt-remapping etc is not setup properly by the bios.
We now has a case for the apic to fall back to legacy flat mode during
apic driver probe() seqeuence. Add a simple flat_probe() which allows
the apic_flat mode to be the last fallback option.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.484984298@sbsiddha-desk.sc.intel.com
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Use raw_spin_unlock_irqrestore() as equivalent to
raw_spin_lock_irqsave().
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1324646665-13334-1-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This change fixes a linking problem, which happens if oprofile
is selected to be compiled as built-in:
`oprofile_arch_exit' referenced in section `.init.text' of
arch/arm/oprofile/built-in.o: defined in discarded section
`.exit.text' of arch/arm/oprofile/built-in.o
The problem is appeared after commit 87121ca504, which
introduced oprofile_arch_exit() calls from __init function. Note
that the aforementioned commit has been backported to stable
branches, and the problem is known to be reproduced at least
with 3.0.13 and 3.1.5 kernels.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@nokia.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20111222151540.GB16765@erda.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the s3c6410 varient SoCs.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Added SPI Setup file for GPIO configurations and platform data
initialization.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Added SPI Setup file for GPIO configurations and platform data
initialization.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Added SPI Setup file for GPIO configurations and platform data
initialization.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Setup files are added for SPI GPIO configurations and platform data
initialization.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
SPI platform device definitions consolidated from respective machine
folder to plat-samsung
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
SPI bus clocks can be avoided passing through platform
data as spi driver is getting the bus clock using the
generic clock connection id registered via clkdev.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Registered the SPI bus clocks with clkdev using generic
connection id.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Registered the SPI bus clocks with clkdev using generic
connection id.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Registered the SPI bus clocks with clkdev using generic
connection id.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Registered the SPI bus clocks with clkdev using generic
connection id.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add support for lookup of sdhci-s3c controller clocks using generic names
for s3c2416, s3c64xx, s5pc100, s5pv210 and exynos4 SoC's.
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
[kgene.kim@samsung.com: fixed trailing whitespace]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The bus clocks previously sent through platform data to SDHCI controller
are removed.
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add initial dts file for EXYNOS4210 SoC. This dts file describes
the SoC specific devices and properties. Along with this, add dts
file for Samsung's SMDKV310 board and Insignal's ORIGEN board which
uses the EXYNOS4210 dts file and extends it to describe the board
specific properties.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add a new EXYNOS4 compatible device tree enabled board file. Boards
based on the EXYNOS4 family of SoC's can use this as the machine/board
file. When using this machine fike, a corresponding device tree blob
which describes the board's properties should be supplied at boot time
to the kernel.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
PDMA controllers when instantiated from device tree are registered using
amba_device_register(). The registration process enables clock to the
controllers to read the peripheral id of the PDMA amba device.
In case of Exynos4, the clocks to the PDMA controllers are named as 'dma'
but amba_device_register() looks up the clock using the name 'apb_pclk'.
Hence, alias clocks with name 'apb_pclk' clock are created for clocks
with name 'dma'.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
