Commit graph

64,840 commits

Author SHA1 Message Date
Frans Pop
04157e4c06 [IA64] remove trailing space in messages
ia64 parts of system wide cleanup to drop trailing whitespace
from lines in message strings.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-02-26 11:18:52 -08:00
FUJITA Tomonori
3a095a97e1 [IA64] use asm-generic/scatterlist.h
IA64's scatterlist structure is identical to the generic one.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-02-26 11:14:24 -08:00
David Woodhouse
a7790532f5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
The SmartMedia FTL code depends on new kfifo bits from 2.6.33
2010-02-26 19:06:24 +00:00
Linus Torvalds
68c6b85984 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (48 commits)
  x86/PCI: Prevent mmconfig memory corruption
  ACPI: Use GPE reference counting to support shared GPEs
  x86/PCI: use host bridge _CRS info by default on 2008 and newer machines
  PCI: augment bus resource table with a list
  PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs
  PCI: read bridge windows before filling in subtractive decode resources
  PCI: split up pci_read_bridge_bases()
  PCIe PME: use pci_pcie_cap()
  PCI PM: Run-time callbacks for PCI bus type
  PCIe PME: use pci_is_pcie()
  PCI / ACPI / PM: Platform support for PCI PME wake-up
  ACPI / ACPICA: Multiple system notify handlers per device
  ACPI / PM: Add more run-time wake-up fields
  ACPI: Use GPE reference counting to support shared GPEs
  PCI PM: Make it possible to force using INTx for PCIe PME signaling
  PCI PM: PCIe PME root port service driver
  PCI PM: Add function for checking PME status of devices
  PCI: mark is_pcie obsolete
  PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges
  PCI: pciehp: second try to get big range for pcie devices
  ...
2010-02-26 10:35:27 -08:00
Murali Karicheri
a30d6744cf V4L/DVB: DaVinci - Adding platform & board changes for vpfe capture on DM365
This patch adds following changes:-
	1) add sub device configuration data for TVP5146 used by vpfe capture
	2) registers platform devices for vpfe_capture, isif and vpss
	3) defines hardware resources for the devices listed under 2)
	4) defines clock aliase for isif driver
	5) adding setup_pinmux() for isif

Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Murali Karicheri <mkaricheri@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:06 -03:00
Antonio Ospite
6b727c68ea pxa_camera: remove init() callback
pxa_camera init() callback is sometimes abused to setup MFP for PXA CIF, or
even to request GPIOs to be used by the camera *sensor*. These initializations
can be performed statically in machine init functions.

The current semantics for this init() callback is ambiguous anyways, it is
invoked in pxa_camera_activate(), hence at device node open, but its users use
it like a generic initialization to be done at module init time (configure
MFP, request GPIOs for *sensor* control).

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:00 -03:00
Kuninori Morimoto
3675c750cf soc-camera: ov772x: Modify buswidth control
This patch removes "buswidth" struct member, and sets the default buswidth
to the natively supported 10 bit. You can select 8 bit buswidth by new flag.
This patch also modify ap325rxa/migor setup.c

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:00 -03:00
Muralidharan Karicheri
77c8b5fb0e V4L/DVB: vpfe-capture: converting ccdc drivers to platform-drivers
This adds platform code for ccdc driver on DM355 and DM6446.

1) new ccdc platform devices added
2) added clock aliases master and slave for CCDC clocks
3) added dm355_ccdc_setup_pinmux() pin-mux setup hook in dm355 ccdc driver platform data

Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:45 -03:00
Pekka Enberg
6adad2d543 Merge branch 'kmemcheck/fixes' into kmemcheck-for-linus 2010-02-26 19:25:30 +02:00
Peter Zijlstra
1dd2980d99 perf_event, amd: Fix spinlock initialization
Avoid kernels from exploding on AMD machines when they have any
lock debugging bits enabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 17:25:19 +01:00
Peter Zijlstra
f22f54f449 perf_events, x86: Split PMU definitions into separate files
Split amd,p6,intel into separate files so that we can easily deal with
CONFIG_CPU_SUP_* things, needed to make things build now that perf_event.c
relies on symbols from amd.c

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 15:44:04 +01:00
Robert Richter
cfc9c0b450 oprofile/x86: fix msr access to reserved counters
During switching virtual counters there is access to perfctr msrs. If
the counter is not available this fails due to an invalid
address. This patch fixes this.

Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:28:16 +01:00
Robert Richter
c17c8fbf34 oprofile/x86: use kzalloc() instead of kmalloc()
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:20:03 +01:00
Robert Richter
68dc819ce8 oprofile/x86: fix perfctr nmi reservation for mulitplexing
Multiple virtual counters share one physical counter. The reservation
of virtual counters fails due to duplicate allocation of the same
counter. The counters are already reserved. Thus, virtual counter
reservation may removed at all. This also makes the code easier.

Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:19:03 +01:00
Naga Chumbalkar
8588d10671 oprofile/x86: add comment to counter-in-use warning
Currently, oprofile fails silently on platforms where a non-OS entity
such as the system firmware "enables" and uses a performance
counter. There is a warning in the code for this case.

The warning indicates an already running counter. If oprofile doesn't
collect data, then try using a different performance counter on your
platform to monitor the desired event. Delete the counter from the
desired event by editing the

 /usr/share/oprofile/<cpu_type>/<cpu>/events

file. If the event cannot be monitored by any other counter, contact
your hardware or BIOS vendor.

Cc: Shashi Belur <shashi-kiran.belur@hp.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:34 +01:00
Robert Richter
98a2e73a06 oprofile/x86: warn user if a counter is already active
This patch generates a warning if a counter is already active.

Implemented for AMD and P6 models. P4 is not supported.

Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Cc: Shashi Belur <shashi-kiran.belur@hp.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:03 +01:00
Robert Richter
ba52078e19 oprofile/x86: implement randomization for IBS periodic op counter
IBS selects an op (execution operation) for sampling by counting
either cycles or dispatched ops. Better statistical samples can be
produced by adding a software generated random offset to the periodic
op counter value with each sample.

This patch adds software randomization to the IBS periodic op
counter. The lower 12 bits of the 20 bit counter are
randomized. IbsOpCurCnt is initialized with a 12 bit random value.

There is a work around if the hw can not write to IbsOpCurCnt. Then
the lower 8 bits of the 16 bit IbsOpMaxCnt [15:0] value are randomized
in the range of -128 to +127 by adding/subtracting an offset to the
maximum count (IbsOpMaxCnt).

The linear feedback shift register (LFSR) algorithm is used for
pseudo-random number generation to have low impact to the memory
system.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:02 +01:00
Suravee Suthikulpanit
f125be1469 oprofile/x86: implement lsfr pseudo-random number generator for IBS
This patch implements a linear feedback shift register (LFSR) for
pseudo-random number generation for IBS.

For IBS measurements it would be good to minimize memory traffic in
the interrupt handler since every access pollutes the data
caches. Computing a maximal period LFSR just needs shifts and ORs.

The LFSR method is good enough to randomize the ops at low
overhead. 16 pseudo-random bits are enough for the implementation and
it doesn't matter that the pattern repeats with a fairly short
cycle. It only needs to break up (hard) periodic sampling behavior.

The logic was designed by Paul Drongowski.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:02 +01:00
Robert Richter
64683da664 oprofile/x86: implement IBS cpuid feature detection
This patch adds IBS feature detection using cpuid flags. An IBS
capability mask is introduced to test for certain IBS features. The
bit mask is the same as for IBS cpuid feature flags (Fn8000_001B_EAX),
but bit 0 is used to indicate the existence of IBS.

The patch also changes the handling of the IbsOpCntCtl bit (periodic
op counter count control). The oprofilefs file for this feature
(ibs_op/dispatched_ops) will be only exposed if the feature is
available, also the default for the bit is set to count clock cycles.

In general, the userland can detect the availability of a feature by
checking for the corresponding file in oprofilefs. If it exists, the
feature also exists. This may lead to a dynamic file layout depending
on the cpu type with that the userland has to deal with. Current
opcontrol is compatible.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:02 +01:00
Robert Richter
89baaaa98a oprofile/x86: remove node check in AMD IBS initialization
Standard AMD systems have the same number of nodes as there are
northbridge devices. However, there may kernel configurations
(especially for 32 bit) or system setups exist, where the node number
is different or it can not be detected properly. Thus the check is not
reliable and may fail though IBS setup was fine. For this reason it is
better to remove the check.

Cc: stable <stable@kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:01 +01:00
Robert Richter
013cfc5067 oprofile/x86: remove OPROFILE_IBS config option
OProfile support for IBS is now for several versions in the
kernel. The feature is stable now and the code can be activated
permanently.

As a side effect IBS now works also on nosmp configs.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:13:55 +01:00
Robert Richter
b309a294e5 oprofile: remove EXPERIMENTAL from the config option description
OProfile is already used for a long time and no longer experimental.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:13:54 +01:00
Robert Richter
18b4a4d59e oprofile: remove tracing build dependency
The commit

 1155de4 ring-buffer: Make it generally available

already made ring-buffer available without the TRACING option
enabled. This patch removes the TRACING dependency from oprofile.

Fixes also oprofile configuration on ia64.

The patch also applies to the 2.6.32-stable kernel.

Reported-by: Tony Jones <tonyj@suse.de>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 14:52:52 +01:00
Martin K. Petersen
8a78362c4e block: Consolidate phys_segment and hw_segment limits
Except for SCSI no device drivers distinguish between physical and
hardware segment limits.  Consolidate the two into a single segment
limit.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 13:58:08 +01:00
Martin K. Petersen
086fa5ff08 block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectors
The block layer calling convention is blk_queue_<limit name>.
blk_queue_max_sectors predates this practice, leading to some confusion.
Rename the function to appropriately reflect that its intended use is to
set max_hw_sectors.

Also introduce a temporary wrapper for backwards compability.  This can
be removed after the merge window is closed.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 13:58:08 +01:00
FUJITA Tomonori
a6d468d053 sparc: use asm-generic/scatterlist.h
sparc's scatterlist structure is identical to the generic one.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26 04:33:27 -08:00
Peter Zijlstra
6667661df4 perf_events, x86: Remove superflous MSR writes
We re-program the event control register every time we reset the count,
this appears to be superflous, hence remove it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 10:56:54 +01:00
Peter Zijlstra
6e37738a2f perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in()
Since the cpu argument to hw_perf_group_sched_in() is always
smp_processor_id(), simplify the code a little by removing this argument
and using the current cpu where needed.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1265890918.5396.3.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 10:56:53 +01:00
Stephane Eranian
38331f62c2 perf_events, x86: AMD event scheduling
This patch adds correct AMD NorthBridge event scheduling.

NB events are events measuring L3 cache, Hypertransport traffic. They are
identified by an event code >= 0xe0. They measure events on the
Northbride which is shared by all cores on a package. NB events are
counted on a shared set of counters. When a NB event is programmed in a
counter, the data actually comes from a shared counter. Thus, access to
those counters needs to be synchronized.

We implement the synchronization such that no two cores can be measuring
NB events using the same counters. Thus, we maintain a per-NB allocation
table. The available slot is propagated using the event_constraint
structure.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4b703957.0702d00a.6bf2.7b7d@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 10:56:53 +01:00
Stephane Eranian
d76a0812ac perf_events: Add new start/stop PMU callbacks
In certain situations, the kernel may need to stop and start the same
event rapidly. The current PMU callbacks do not distinguish between stop
and release (i.e., stop + free the resource). Thus, a counter may be
released, then it will be immediately re-acquired. Event scheduling will
again take place with no guarantee to assign the same counter. On some
processors, this may event yield to failure to assign the event back due
to competion between cores.

This patch is adding a new pair of callback to stop and restart a counter
without actually release the underlying counter resource. On stop, the
counter is stopped, its values saved and that's it. On start, the value
is reloaded and counter is restarted (on x86, actual restart is delayed
until perf_enable()).

Signed-off-by: Stephane Eranian <eranian@google.com>
[ added fallback to ->enable/->disable for all other PMUs
  fixed x86_pmu_start() to call x86_pmu.enable()
  merged __x86_pmu_disable into x86_pmu_stop() ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4b703875.0a04d00a.7896.ffffb824@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 10:56:53 +01:00
Ingo Molnar
281b3714e9 Merge branch 'tip/tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/core 2010-02-26 09:20:17 +01:00
Benjamin Herrenschmidt
3d98ffbffb powerpc: Fix lwsync feature fixup vs. modules on 64-bit
Anton's commit enabling the use of the lwsync fixup mechanism on 64-bit
breaks modules. The lwsync fixup section uses .long instead of the
FTR_ENTRY_OFFSET macro used by other fixups sections, and thus will
generate 32-bit relocations that our module loader cannot resolve.

This changes it to use the same type as other feature sections.

Note however that we might want to consider using 32-bit for all the
feature fixup offsets and add support for R_PPC_REL32 to module_64.c
instead as that would reduce the size of the kernel image. I'll leave
that as an exercise for the reader for now...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-26 18:29:17 +11:00
Yinghai Lu
fb90ef93df early_res: Add free_early_partial()
To free partial areas in pcpu_setup...

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4B85E245.5030001@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 08:25:35 +01:00
Magnus Damm
b5f5fe80fa sh: remove dead LED code for migo-r and ms7724se
CONFIG_PM is always set on SH-Mobile these days so
get rid of the unused LED setup code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:30:09 +09:00
Magnus Damm
6b3b55750b sh: ecovec build fix for CONFIG_I2C=n
Allow building the ecovec board support code
even though I2C support is disabled.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:30:08 +09:00
Magnus Damm
2839bd61f6 sh: ecovec r-standby support
This patch adds board specific r-standby resume code
for ecovec.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:29:28 +09:00
Magnus Damm
b67cf2848a sh: ms7724se r-standby support
This patch adds board specific r-standby resume code
for ms7724se.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:29:27 +09:00
Magnus Damm
41bfb7d7a6 sh: SH-Mobile R-standby register save/restore
Add code to save/restore registers during
R-standby sleep on SH-Mobile processors.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:29:26 +09:00
Luca Barbieri
a7e926abc3 x86-32: Rewrite 32-bit atomic64 functions in assembly
This patch replaces atomic64_32.c with two assembly implementations,
one for 386/486 machines using pushf/cli/popf and one for 586+ machines
using cmpxchg8b.

The cmpxchg8b implementation provides the following advantages over the
current one:

1. Implements atomic64_add_unless, atomic64_dec_if_positive and
   atomic64_inc_not_zero

2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison

3. Uses custom register calling conventions that reduce or eliminate
   register moves to suit cmpxchg8b

4. Reads the initial value instead of using cmpxchg8b to do that.
   Currently we use lock xaddl and movl, which seems the fastest.

5. Does not use the lock prefix for atomic64_set
   64-bit writes are already atomic, so we don't need that.
   We still need it for atomic64_read to avoid restoring a value
   changed in the meantime.

6. Allocates registers as well or better than gcc

The 386 implementation provides support for 386 and 486 machines.
386/486 SMP is not supported (we dropped it), but such support can be
added easily if desired.

A pure assembly implementation is required due to the custom calling
conventions, and desire to use %ebp in atomic64_add_return (we need
7 registers...), as well as the ability to use pushf/popf in the 386
code without an intermediate pop/push.

The parameter names are changed to match the convention in atomic_64.h

Changes in v3 (due to rebasing to tip/x86/asm):
- Patches atomic64_32.h instead of atomic_32.h
- Uses the CALL alternative mechanism from commit
  1b1d925818

Changes in v2:
- Merged 386 and cx8 support in the same patch
- 386 support now done in assembly, C code no longer used at all
- cmpxchg64 is used for atomic64_cmpxchg
- stop using macros, use one-line inline functions instead
- miscellanous changes and improvements

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25 20:47:30 -08:00
Luca Barbieri
9c76b38476 x86-32: Allow UP/SMP lock replacement in cmpxchg64
Use the functionality just introduced in the previous patch: mark the
lock prefixes in cmpxchg64 alternatives for UP removal.

Changes in v2:
- Naming change

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
LKML-Reference: <1267005265-27958-3-git-send-email-luca@luca-barbieri.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25 20:47:03 -08:00
Luca Barbieri
b3ac891b67 x86: Add support for lock prefix in alternatives
The current lock prefix UP/SMP alternative code doesn't allow
LOCK_PREFIX to be used in alternatives code.

This patch solves the problem by adding a new LOCK_PREFIX_ALTERNATIVE_PATCH
macro that only records the lock prefix location but does not emit
the prefix.

The user of this macro can then start any alternative sequence with
"lock" and have it UP/SMP patched.

To make this work, the UP/SMP alternative code is changed to do the
lock/DS prefix switching only if the byte actually contains a lock or
DS prefix.

Thus, if an alternative without the "lock" is selected, it will now do
nothing instead of clobbering the code.

Changes in v2:
- Naming change
- Change label to not conflict with alternatives

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
LKML-Reference: <1267005265-27958-2-git-send-email-luca@luca-barbieri.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25 20:46:23 -08:00
Benjamin Herrenschmidt
874f2f997d Merge commit 'origin/master' into next
Manual merge of:
	drivers/char/hvc_console.c
	drivers/char/hvc_console.h
2010-02-26 14:41:00 +11:00
Thomas Gleixner
d5d0e88c1e x86, olpc: Use pci subarch init for OLPC
Replace the #ifdef'ed OLPC-specific init functions by a conditional
x86_init function.  If the function returns 0 we leave pci_arch_init,
otherwise we continue.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Andres Salomon <dilinger@collabora.co.uk>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318CE89@orsmsx508.amr.corp.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25 19:26:23 -08:00
Thomas Gleixner
4fb6088a5c x86, pci: Add arch_init to x86_init abstraction
Added an abstraction function for arch specific init calls.

Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318CE84@orsmsx508.amr.corp.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25 19:24:43 -08:00
Jacob Pan
4b2f3f7d0f x86, mrst: Add Kconfig dependencies for Moorestown
The Moorestown platform requires IOAPIC for all interrupts from the
south complex, since there is no legacy PIC.

Furthermore, Moorestown I/O requires PCI.  Moorestown PCI depends on PCI MMCONFIG
and DIRECT method to perform device enumeration, as there is no PCI BIOS.

[ hpa: rewrote commit message ]

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1267120934-9505-1-git-send-email-jacob.jun.pan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25 16:16:26 -08:00
Russell King
98e12b5a6e ARM: Fix decompressor's kernel size estimation for ROM=y
Commit 2552fc2 changed the way the decompressor decides if it is safe
to decompress the kernel directly to its final location.  Unfortunately,
it took the top of the compressed data as being the stack pointer,
which it is for ROM=n cases.  However, for ROM=y, the stack pointer
is not relevant, and results in the wrong answer.

Fix this by explicitly storing the end of the biggybacked data in the
decompressor, and use that to calculate the compressed image size.

CC: <stable@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-26 00:10:47 +00:00
Linus Torvalds
6ebdc661b6 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits)
  of: remove undefined request_OF_resource & release_OF_resource
  of/sparc: Remove sparc-local declaration of allnodes and devtree_lock
  of: move definition of of_chosen into common code.
  of: remove unused extern reference to devtree_lock
  of: put default string compare and #a/s-cell values into common header
  of/flattree: Don't assume HAVE_LMB
  of: protect linux/of.h with CONFIG_OF
  proc_devtree: fix THIS_MODULE without module.h
  of: Remove old and misplaced function declarations
  of/flattree: Make the kernel accept ePAPR style phandle information
  of/flattree: endian-convert members of boot_param_header
  of: assume big-endian properties, adding conversions where necessary
  of: use __be32 for cell value accessors
  of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing
  of/flattree: use callback to setup initrd from /chosen
  proc_devtree: include linux/of.h
  of: make set_node_proc_entry private to proc_devtree.c
  of: include linux/proc_fs.h
  of/flattree: merge early_init_dt_scan_memory() common code
  of: add 'of_' prefix to machine_is_compatible()
  ...
2010-02-25 15:38:37 -08:00
Alex Chiang
e72aca3083 [IA64] build arch/ia64/kernel/acpi-ext.o when CONFIG_ACPI
Simplify the makefile slightly by always building acpi-ext.o when
CONFIG_ACPI is turned on.

Yes, this adds a little bloat to the other configs, but not much:
   text	   data	    bss	    dec	    hex	filename
    839	     41	      0	    880	    370	arch/ia64/kernel/acpi-ext.o

Before:
   text	   data	    bss	    dec		    hex	filename
10952753	1299212	1334241	13586206	 cf4f1e	vmlinux

After:
   text	   data	    bss	    dec		    hex	filename
10953739	1299084	1334241	13587064	 cf5278	vmlinux

(gdb) p 13587064 - 13586206
$2 = 858

Seems like a small price to pay for the benefit of not having to think
so hard about the multitude of ia64 configs when reading code/Makefiles.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-02-25 15:16:38 -08:00
Pekka Enberg
c1fd1b4383 x86, mm: Unify kernel_physical_mapping_init() API
This patch changes the 32-bit version of kernel_physical_mapping_init() to
return the last mapped address like the 64-bit one so that we can unify the
call-site in init_memory_mapping().

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <alpine.DEB.2.00.1002241703570.1180@melkki.cs.helsinki.fi>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25 15:15:21 -08:00
Alex Chiang
d868080d2a [IA64] Only build arch/ia64/kernel/acpi.o when CONFIG_ACPI
The following commit broke the ia64 sim_defconfig build:
	3b2b84c0b81108a9a869a88bf2beeb5a95d81dd1
	ACPI: processor: driver doesn't need to evaluate _PDC

This is because it added:
	+#include <acpi/processor.h>

To arch/ia64/kernel/acpi.c. Unfortunately, the ia64_simdefconfig does
not turn on CONFIG_ACPI, and we get build errors.

The fix described in $subject seems to be the most sensible way to
untangle the mess.

The other issue is that acpi_get_sysname() is required for all configs,
most of which define CONFIG_ACPI, but are not CONFIG_IA64_GENERIC. Turn
it into an inline to cover the "non generic" ia64 configs; to prevent
a duplicate definition build error, we need to wrap the definition in
acpi.o inside an #ifdef.

Finally, move the pm_idle and pm_power_off exports into process.c (which
is always built), similar to other architectures, and allow the sim
defconfig to link.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-02-25 15:15:13 -08:00