Commit graph

64,840 commits

Author SHA1 Message Date
Andrew Victor
2af29b7861 [ARM] 5390/1: AT91: Watchdog fixes
The recently merged AT91SAM9 watchdog driver uses the
AT91SAM9X_WATCHDOG config variable, whereas the original version of
the driver (and the platform support code) used AT91SAM9_WATCHDOG.
This causes the watchdog platform_device to never be registered, and
therefore the driver not to be initialized.

This patch:
- updates the platform support code to use AT91SAM9X_WATCHDOG.
- includes <linux/io.h> to fix compile error (same fix as was applied
to at91rm9200_wdt.c)
- fixes comment regarding watchdog clock-rates in at91rm9200.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-14 16:01:57 +00:00
Russell King
abf239657b [ARM] omap: fix _omap2_clksel_get_src_field()
_omap2_clksel_get_src_field() was returning the first entry which was
either the default _or_ applicable to the SoC.  This is wrong - we
should be returning the first default which is applicable to the SoC.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-14 13:25:38 +00:00
Russell King
9132f1b453 [ARM] omap: fix omap2_divisor_to_clksel() error return value
The error checks for omap2_divisor_to_clksel() and comment disagree with
the actual value returned on error.  Fix this to return the correct error
value.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-14 13:24:10 +00:00
Russell King
8b9dbc16d4 [ARM] omap: arrange for clock recalc methods to return the rate
linux-omap source commit 33d000c99ee393fe2042f93e8422f94976d276ce
introduces a way to "dry run" clock changes before they're committed.
However, this involves putting logic to handle this into each and
every recalc function, and unfortunately due to the caching, led to
some bugs.

Solve both of issues by making the recalc methods always return the
clock rate for the clock, which the caller decides what to do with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-14 09:59:21 +00:00
Jeremy Fitzhardinge
8960f8c8e7 Merge commit 'tip/x86/headers' into x86/untangle2
* commit 'tip/x86/headers': (42 commits)
  x86: fix "__udivdi3" [drivers/scsi/aha1542.ko] undefined
  unconditionally include asm/types.h from linux/types.h
  make linux/types.h as assembly safe
  Neither asm/types.h nor linux/types.h is required for arch/ia64/include/asm/fpu.h
  headers_check fix cleanup: linux/reiserfs_fs.h
  headers_check fix cleanup: linux/nubus.h
  headers_check fix cleanup: linux/coda_psdev.h
  headers_check fix: x86, setup.h
  headers_check fix: x86, prctl.h
  headers_check fix: linux/reinserfs_fs.h
  headers_check fix: linux/socket.h
  headers_check fix: linux/nubus.h
  headers_check fix: linux/in6.h
  headers_check fix: linux/coda_psdev.h
  headers_check fix: xtensa, swab.h
  headers_check fix: powerpc, swab.h
  headers_check fix: powerpc, spu_info.h
  headers_check fix: powerpc, ps3fb.h
  headers_check fix: powerpc, kvm.h
  headers_check fix: powerpc, elf.h
  ...
2009-02-13 12:53:17 -08:00
Ingo Molnar
22796b1572 Merge branch 'core/header-fixes' into x86/headers
Conflicts:
	arch/x86/include/asm/setup.h
2009-02-13 21:05:03 +01:00
James Bottomley
bf33a70a73 x86: fix "__udivdi3" [drivers/scsi/aha1542.ko] undefined
Commit 976e8f677e ("x86: asm/io.h: unify
virt_to_phys/phys_to_virt") changed the return of virt_to_phys from long
to phys_addr_t which is unsigned long long on a PAE platform.

So, I could suggest a fix below since isa addresses may never be above
32 bits.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 21:02:02 +01:00
Jeremy Fitzhardinge
9b3651cbc2 x86: move more pagetable-related definitions into pgtable*.h
PAGETABLE_LEVELS and the PTE masks should be in pgtable*.h

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-13 11:35:01 -08:00
Jeremy Fitzhardinge
0341c14da4 x86: use _types.h headers in asm where available
In general, the only definitions that assembly files can use
are in _types.S headers (where available), so convert them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-13 11:35:01 -08:00
Dimitri Sivanich
c466ed2e43 x86, UV: set full apicid in uv_hub_send_ipi
The uv_hub_send_ipi() function needs to set the full apicid in the
UVH_IPI_INT mmr.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 19:13:13 +01:00
Jason Baron
b5f9fd0f8a tracing: convert c/p state power tracer to use tracepoints
Convert the c/p state "power" tracer to use tracepoints. Avoids a
function call when the tracer is disabled.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-13 09:06:18 -05:00
Ian Campbell
694aa96060 xen: fix xen_flush_tlb_others
The commit
    commit 4595f9620c
    Author: Rusty Russell <rusty@rustcorp.com.au>
    Date:   Sat Jan 10 21:58:09 2009 -0800

        x86: change flush_tlb_others to take a const struct cpumask

causes xen_flush_tlb_others to allocate a multicall and then issue it
without initializing it in the case where the cpumask is empty,
leading to:

        [    8.354898] 1 multicall(s) failed: cpu 1
        [    8.354921] Pid: 2213, comm: bootclean Not tainted 2.6.29-rc3-x86_32p-xenU-tip #135
        [    8.354937] Call Trace:
        [    8.354955]  [<c01036e3>] xen_mc_flush+0x133/0x1b0
        [    8.354971]  [<c0105d2a>] ? xen_force_evtchn_callback+0x1a/0x30
        [    8.354988]  [<c0105a60>] xen_flush_tlb_others+0xb0/0xd0
        [    8.355003]  [<c0126643>] flush_tlb_page+0x53/0xa0
        [    8.355018]  [<c0176a80>] do_wp_page+0x2a0/0x7c0
        [    8.355034]  [<c0238f0a>] ? notify_remote_via_irq+0x3a/0x70
        [    8.355049]  [<c0178950>] handle_mm_fault+0x7b0/0xa50
        [    8.355065]  [<c0131a3e>] ? wake_up_new_task+0x8e/0xb0
        [    8.355079]  [<c01337b5>] ? do_fork+0xe5/0x320
        [    8.355095]  [<c0121919>] do_page_fault+0xe9/0x240
        [    8.355109]  [<c0121830>] ? do_page_fault+0x0/0x240
        [    8.355125]  [<c032457a>] error_code+0x72/0x78
        [    8.355139]   call  1/1: op=2863311530 arg=[aaaaaaaa] result=-38     xen_flush_tlb_others+0x41/0xd0

Since empty cpumasks are rare and undoing an xen_mc_entry() is tricky
just issue such requests normally.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 13:54:14 +01:00
Ingo Molnar
beb6943d8d x86 headers: protect page_32.h via __ASSEMBLY__
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 13:36:47 +01:00
Ingo Molnar
e43623b4ed x86 headers: include page_types.h in pgtable_types.h
To properly pick up details like PTE_FLAGS_MASK.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 13:24:19 +01:00
Ingo Molnar
56cefcea7c x86 headers: include linux/types.h
To properly pick up types relied on by prototypes like 'bool'.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 13:23:02 +01:00
Ingo Molnar
999c7880cc x86 headers: remove duplicate pud_large() definition
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 13:15:55 +01:00
Ingo Molnar
b233969eaa Merge branch 'x86/untangle2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into x86/headers
Conflicts:
	arch/x86/include/asm/page.h
	arch/x86/include/asm/pgtable.h
	arch/x86/mach-voyager/voyager_smp.c
	arch/x86/mm/fault.c
2009-02-13 13:09:00 +01:00
Ingo Molnar
8f8573ae9f Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/core 2009-02-13 11:57:18 +01:00
Ingo Molnar
5fb896a4e9 Merge branch 'tip/tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-02-13 11:02:40 +01:00
Ingo Molnar
1c511f740f Merge branches 'tracing/ftrace', 'tracing/ring-buffer', 'tracing/sysprof', 'tracing/urgent' and 'linus' into tracing/core 2009-02-13 10:25:18 +01:00
Ingo Molnar
b1864e9a1a Merge branch 'x86/core' into perfcounters/core
Conflicts:
	arch/x86/Kconfig
	arch/x86/kernel/apic.c
	arch/x86/kernel/setup_percpu.c
2009-02-13 09:49:38 +01:00
Ingo Molnar
7032e86967 Merge branches 'x86/paravirt', 'x86/pat', 'x86/setup-v2', 'x86/subarch', 'x86/uaccess' and 'x86/urgent' into x86/core 2009-02-13 09:47:32 +01:00
Ingo Molnar
f268fe7333 Merge branch 'x86/mm' into x86/core 2009-02-13 09:47:24 +01:00
Ingo Molnar
a56cdcb662 Merge branches 'x86/acpi', 'x86/asm', 'x86/cpudetect', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/header-fixes', 'x86/headers' and 'x86/minor-fixes' into x86/core 2009-02-13 09:46:36 +01:00
Ingo Molnar
881c47760b Merge branch 'x86/cleanups' into x86/core 2009-02-13 09:45:42 +01:00
Ingo Molnar
ab639f3593 Merge branch 'core/percpu' into x86/core 2009-02-13 09:45:09 +01:00
Ingo Molnar
f8a6b2b9ce Merge branch 'linus' into x86/apic
Conflicts:
	arch/x86/kernel/acpi/boot.c
	arch/x86/mm/fault.c
2009-02-13 09:44:22 +01:00
Ingo Molnar
e9c4ffb11f Merge branch 'linus' into perfcounters/core
Conflicts:
	arch/x86/kernel/acpi/boot.c
2009-02-13 09:34:07 +01:00
john stultz
b13e24644c x86, hpet: fix for LS21 + HPET = boot hang
Between 2.6.23 and 2.6.24-rc1 a change was made that broke IBM LS21
systems that had the HPET enabled in the BIOS, resulting in boot hangs
for x86_64.

Specifically commit b8ce335906, which
merges the i386 and x86_64 HPET code.

Prior to this commit, when we setup the HPET timers in x86_64, we did
the following:

	hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
                    HPET_TN_32BIT, HPET_T0_CFG);

However after the i386/x86_64 HPET merge, we do the following:

	cfg = hpet_readl(HPET_Tn_CFG(timer));
	cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
			HPET_TN_SETVAL | HPET_TN_32BIT;
	hpet_writel(cfg, HPET_Tn_CFG(timer));

However on LS21s with HPET enabled in the BIOS, the HPET_T0_CFG register
boots with Level triggered interrupts (HPET_TN_LEVEL) enabled. This
causes the periodic interrupt to be not so periodic, and that results in
the boot time hang I reported earlier in the delay calibration.

My fix: Always disable HPET_TN_LEVEL when setting up periodic mode.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 09:15:46 +01:00
Michael Neuling
26456dcfb8 powerpc/vsx: Fix VSX alignment handler for regs 32-63
Fix the VSX alignment handler for VSX registers > 32.  32-63 are stored
in the VMX part of the thread_struct not the FPR part.

Signed-off-by: Michael Neuling <mikey@neuling.org>
CC: stable@kernel.org (2.6.27 & .28 please)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:45 +11:00
Geoff Levand
0047656e2a powerpc/ps3: Move ps3_mm_add_memory to device_initcall
Change the PS3 hotplug memory routine ps3_mm_add_memory() from
a core_initcall to a device_initcall.

core_initcall routines run before the powerpc topology_init()
startup routine, which is a subsys_initcall, resulting in
failure of ps3_mm_add_memory() when CONFIG_NUMA=y.  When
ps3_mm_add_memory() fails the system will boot with just the
128 MiB of boot memory

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:45 +11:00
Dave Hansen
06eccea6c3 powerpc/mm: Fix numa reserve bootmem page selection
Fix the powerpc NUMA reserve bootmem page selection logic.

commit 8f64e1f2d1 (powerpc: Reserve
in bootmem lmb reserved regions that cross NUMA nodes) changed
the logic for how the powerpc LMB reserved regions were converted
to bootmen reserved regions.  As the folowing discussion reports,
the new logic was not correct.

mark_reserved_regions_for_nid() goes through each LMB on the
system that specifies a reserved area.  It searches for
active regions that intersect with that LMB and are on the
specified node.  It attempts to bootmem-reserve only the area
where the active region and the reserved LMB intersect.  We
can not reserve things on other nodes as they may not have
bootmem structures allocated, yet.

We base the size of the bootmem reservation on two possible
things.  Normally, we just make the reservation start and
stop exactly at the start and end of the LMB.

However, the LMB reservations are not aware of NUMA nodes and
on occasion a single LMB may cross into several adjacent
active regions.  Those may even be on different NUMA nodes
and will require separate calls to the bootmem reserve
functions.  So, the bootmem reservation must be trimmed to
fit inside the current active region.

That's all fine and dandy, but we trim the reservation
in a page-aligned fashion.  That's bad because we start the
reservation at a non-page-aligned address: physbase.

The reservation may only span 2 bytes, but that those bytes
may span two pfns and cause a reserve_size of 2*PAGE_SIZE.

Take the case where you reserve 0x2 bytes at 0x0fff and
where the active region ends at 0x1000.  You'll jump into
that if() statment, but node_ar.end_pfn=0x1 and
start_pfn=0x0.  You'll end up with a reserve_size=0x1000,
and then call

  reserve_bootmem_node(node, physbase=0xfff, size=0x1000);

0x1000 may not be on the same node as 0xfff.  Oops.

In almost all the vm code, end_<anything> is not inclusive.
If you have an end_pfn of 0x1234, page 0x1234 is not
included in the range.  Using PFN_UP instead of the
(>> >> PAGE_SHIFT) will make this consistent with the other VM
code.

We also need to do math for the reserved size with physbase
instead of start_pfn.  node_ar.end_pfn << PAGE_SHIFT is
*precisely* the end of the node.  However,
(start_pfn << PAGE_SHIFT) is *NOT* precisely the beginning
of the reserved area.  That is, of course, physbase.
If we don't use physbase here, the reserve_size can be
made too large.

From: Dave Hansen <dave@linux.vnet.ibm.com>
Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>  Tested on PS3.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:45 +11:00
Philippe Gerum
fbc78b07ba powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL
Fix _PAGE_CHG_MASK so that pte_modify() does not affect the _PAGE_SPECIAL bit.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:44 +11:00
Kumar Gala
96a8bac589 powerpc/fsl-booke: Fix compile warning
arch/powerpc/mm/fsl_booke_mmu.c: In function 'adjust_total_lowmem':
arch/powerpc/mm/fsl_booke_mmu.c:221: warning: format '%ld' expects type 'long int', but argument 3 has type 'phys_addr_t'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:54:53 -06:00
Kumar Gala
70fe3af840 powerpc/book-3e: Introduce concept of Book-3e MMU
The Power ISA 2.06 spec introduces a standard MMU programming model that
is based on the Freescale Book-E MMU programing model.  The Freescale
version is pretty backwards compatiable with the ISA 2.06 definition so
we are starting to refactor some of the Freescale code so it can be
easily shared.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:51:33 -06:00
Kumar Gala
d66c82ea45 powerpc/fsl-booke: Add new ISA 2.06 page sizes and MAS defines
The Power ISA 2.06 added power of two page sizes to the embedded MMU
architecture.  Its done it such a way to be code compatiable with the
existing HW.  Made the minor code changes to support both power of two
and power of four page sizes.  Also added some new MAS bits and macros
that are defined as part of the 2.06 ISA.  Renamed some things to use
the 'Book-3e' concept to convey the new MMU that is based on the
Freescale Book-E MMU programming model.

Note, its still invalid to try and use a page size that isn't supported
by cpu.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:37:11 -06:00
Thomas Gleixner
7ad9de6ac8 x86: CPA avoid repeated lazy mmu flush
Impact: Flush the lazy MMU only once

Pending mmu updates only need to be flushed once to bring the
in-memory pagetable state up to date.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-02-12 23:11:58 +01:00
Thomas Gleixner
34b0900d32 x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context
Impact: Catch cases where lazy MMU state is active in a preemtible context

arch_flush_lazy_mmu_cpu() has been changed to disable preemption so
the checks in enter/leave will never trigger. Put the preemtible()
check into arch_flush_lazy_mmu_cpu() to catch such cases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-02-12 23:11:58 +01:00
Jeremy Fitzhardinge
d85cf93da6 x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption
Impact: avoid access to percpu vars in preempible context

They are intended to be used whenever there's the possibility
that there's some stale state which is going to be overwritten
with a queued update, or to force a state change when we may be
in lazy mode.  Either way, we could end up calling it with
preemption enabled, so wrap the functions in their own little
preempt-disable section so they can be safely called in any
context (though preemption should never be enabled if we're actually
in a lazy state).

(Move out of line to avoid #include dependencies.)
    
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-02-12 23:11:58 +01:00
Steven Rostedt
5a5fb7dbe8 preempt-count: force hardirq-count to max of 10
To add a bit in the preempt_count to be set when in NMI context, we
found that some archs did not have enough bits to spare. This is
due to the hardirq_count being a mask that can hold NR_IRQS.

Some archs allow for over 16000 IRQs, and that would require a mask
of 14 bits. The sofitrq mask is 8 bits and the preempt disable mask
is also 8 bits.  The PREEMP_ACTIVE bit is bit 30, and bit 31 would
make the preempt_count (which is type int) a negative number.
A negative preempt_count is a sign of failure.

Add them up 14+8+8+1+1 you get 32 bits. No room for the NMI bit.

But the hardirq_count is to track the number of nested IRQs, not
the number of total IRQs.  This originally took the paranoid approach
of setting the max nesting to NR_IRQS. But when we have archs with
over 1000 IRQs, it is not practical to think they will ever all
nest on a single CPU. Not to mention that this would most definitely
cause a stack overflow.

This patch sets a max of 10 bits to be used for IRQ nesting.
I did a 'git grep HARDIRQ' to examine all users of HARDIRQ_BITS and
HARDIRQ_MASK, and found that making it a max of 10 would not hurt
anyone. I did find that the m68k expected it to be 8 bits, so
I allow for the archs to set the number to be less than 10.

I removed the setting of HARDIRQ_BITS from the archs that set it
to more than 10. This includes ALPHA, ia64 and avr32.

This will always allow room for the NMI bit, and if we need to allow
for NMI nesting, we have 4 bits to play with.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-12 11:19:05 -05:00
Ingo Molnar
d88316c243 x86, 32-bit: refactor find_low_pfn_range()
Impact: cleanup

Make the max_low_pfn logic a bit more standard between
lowmem_pfn_init() and highmem_pfn_init().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 15:21:17 +01:00
Ingo Molnar
4769843bc2 x86, 32-bit: clean up find_low_pfn_range()
Impact: cleanup

Split find_low_pfn_range() into two functions:

 - lowmem_pfn_init()
 - highmem_pfn_init()

The former gets called if all of RAM fits into lowmem,
otherwise we call highmem_pfn_init().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 15:21:16 +01:00
Ingo Molnar
3023533de4 x86: fix warning in find_low_pfn_range()
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 15:21:15 +01:00
Catalin Marinas
2d7c11bfc9 [ARM] 5382/1: unwind: Reorganise the stacktrace support
This patch changes the walk_stacktrace and its callers for easier
integration of stack unwinding. The arch/arm/kernel/stacktrace.h file is
also moved to arch/arm/include/asm/stacktrace.h.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:21:17 +00:00
Catalin Marinas
67a94c23bb [ARM] 5381/1: unwind: Reorganise the traps.c code
This patch moves code around in the arch/arm/kernel/traps.c file for
easier integration of the stack unwinding support.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:21:15 +00:00
Ingo Molnar
bd282422fe x86, defconfig: turn off CONFIG_SCSI_ISCSI_ATTRS=y
It was enabled by mistake - iscsi is not included in a typical
default PC, and no other architecture has it built-in (=y) either.

Turn it off.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 13:06:43 +01:00
Ingo Molnar
556831063b x86, defconfig: turn off CONFIG_ENABLE_WARN_DEPRECATED
deprecation warnings have become rather noisy lately:

drivers/i2c/i2c-core.c: In function ‘i2c_new_device’:
drivers/i2c/i2c-core.c:283: warning: ‘i2c_attach_client’ is deprecated (declared at include/linux/i2c.h:434)
drivers/i2c/i2c-core.c: In function ‘i2c_del_adapter’:
drivers/i2c/i2c-core.c:646: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: In function ‘i2c_register_driver’:
drivers/i2c/i2c-core.c:713: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: In function ‘__detach_adapter’:
drivers/i2c/i2c-core.c:780: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: At top level:
drivers/i2c/i2c-core.c:876: warning: ‘i2c_attach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:827)
drivers/i2c/i2c-core.c:876: warning: ‘i2c_attach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:827)
drivers/i2c/i2c-core.c:904: warning: ‘i2c_detach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:879)
drivers/i2c/i2c-core.c:904: warning: ‘i2c_detach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:879)

So turn it off for now - these reminders can obscure critical warnings.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 12:53:50 +01:00
Ingo Molnar
dd5fc55449 x86, defconfig: update the 64-bit defconfig
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 12:48:48 +01:00
Ingo Molnar
bc8bd002b8 x86, defconfig: update the 32-bit defconfig
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 12:43:52 +01:00
wanzongshun
a12370f12f [ARM] 5393/1: Add W90P910 EVB NOR flash driver
Add W90P910 Evaluate Board NOR flash driver support,
The EV Board default support W19B320ABT7H of Winbond inc.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 11:10:24 +00:00