Commit graph

64,840 commits

Author SHA1 Message Date
Ingo Molnar
193c81b979 x86, irq: add LOCAL_PERF_VECTOR
Add a slot for the performance monitoring interrupt. Not yet used
by any subsystem - but the hardware has it. (This eases integration
with performance monitoring code.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31 02:23:27 +01:00
Uwe Kleine-König
bcc8f3e01f rename platform_driver name "flash" to "sa1100-mtd"
"flash" is a very generic name for a platform_driver that is only
available on SA11x0.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Nicolas Pitre <nico@marvell.com>
2009-01-31 01:21:58 +01:00
Uwe Kleine-König
b3c960b277 annotate that [fp, #-4] is the saved lr
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-01-31 01:21:56 +01:00
Uwe Kleine-König
6fd7ad96d6 Use __SPIN_LOCK_UNLOCKED to initialize bad_irq_desc.lock
SPIN_LOCK_UNLOCKED is deprecated as lockdep cannot properly work with
locks initialized with it.

This fix is necessary to compile the linux-rt tree for ARM.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
2009-01-31 01:21:55 +01:00
Andreas Schwab
7fc49f1981 x86 setup: fix asm constraints in vesa_store_edid
Impact: fix potential miscompile (currently believed non-manifest)

As the comment explains, the VBE DDC call can clobber any register.
Tell the compiler about that fact.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 23:55:25 +01:00
Jeremy Fitzhardinge
4767afbf1f x86/paravirt: fix missing callee-save call on pud_val
Impact: Fix build when CONFIG_PARAVIRT_DEBUG is enabled

Fix missed convertion to using callee-saved calls for pud_val, which
causes a compile error when CONFIG_PARAVIRT_DEBUG is enabled.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-01-30 14:52:39 -08:00
Jeremy Fitzhardinge
da5de7c22e x86/paravirt: use callee-saved convention for pte_val/make_pte/etc
Impact: Optimization

In the native case, pte_val, make_pte, etc are all just identity
functions, so there's no need to clobber a lot of registers over them.

(This changes the 32-bit callee-save calling convention to return both
EAX and EDX so functions can return 64-bit values.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30 14:51:45 -08:00
Jeremy Fitzhardinge
791bad9d28 x86/paravirt: implement PVOP_CALL macros for callee-save functions
Impact: Optimization

Functions with the callee save calling convention clobber many fewer
registers than the normal C calling convention.  Implement variants of
PVOP_V?CALL* accordingly.  This only bothers with functions up to 3
args, since functions with more args may as well use the normal
calling convention.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30 14:51:45 -08:00
Jeremy Fitzhardinge
ecb93d1ccd x86/paravirt: add register-saving thunks to reduce caller register pressure
Impact: Optimization

One of the problems with inserting a pile of C calls where previously
there were none is that the register pressure is greatly increased.
The C calling convention says that the caller must expect a certain
set of registers may be trashed by the callee, and that the callee can
use those registers without restriction.  This includes the function
argument registers, and several others.

This patch seeks to alleviate this pressure by introducing wrapper
thunks that will do the register saving/restoring, so that the
callsite doesn't need to worry about it, but the callee function can
be conventional compiler-generated code.  In many cases (particularly
performance-sensitive cases) the callee will be in assembler anyway,
and need not use the compiler's calling convention.

Standard calling convention is:
	 arguments	    return	scratch
x86-32	 eax edx ecx	    eax		?
x86-64	 rdi rsi rdx rcx    rax		r8 r9 r10 r11

The thunk preserves all argument and scratch registers.  The return
register is not preserved, and is available as a scratch register for
unwrapped callee code (and of course the return value).

Wrapped function pointers are themselves wrapped in a struct
paravirt_callee_save structure, in order to get some warning from the
compiler when functions with mismatched calling conventions are used.

The most common paravirt ops, both statically and dynamically, are
interrupt enable/disable/save/restore, so handle them first.  This is
particularly easy since their calls are handled specially anyway.

XXX Deal with VMI.  What's their calling convention?

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30 14:51:45 -08:00
Jeremy Fitzhardinge
9104a18dcd x86/paravirt: selectively save/restore regs around pvops calls
Impact: Optimization

Each asm paravirt-ops call says what registers are available for
clobbering.  This patch makes use of this to selectively save/restore
registers around each pvops call.  In many cases this significantly
shrinks code size.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30 14:51:44 -08:00
Jeremy Fitzhardinge
b8aa287f77 x86: fix paravirt clobber in entry_64.S
Impact: Fix latent bug

The clobber is trying to say that anything except RDI is available for
clobbering, but actually clobbers everything.  This hasn't mattered
because the clobbers were basically ignored, but subsequent patches
will rely on them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30 14:51:44 -08:00
Jeremy Fitzhardinge
41edafdb78 x86/pvops: add a paravirt_ident functions to allow special patching
Impact: Optimization

Several paravirt ops implementations simply return their arguments,
the most obvious being the make_pte/pte_val class of operations on
native.

On 32-bit, the identity function is literally a no-op, as the calling
convention uses the same registers for the first argument and return.
On 64-bit, it can be implemented with a single "mov".

This patch adds special identity functions for 32 and 64 bit argument,
and machinery to recognize them and replace them with either nops or a
mov as appropriate.

At the moment, the only users for the identity functions are the
pagetable entry conversion functions.

The result is a measureable improvement on pagetable-heavy benchmarks
(2-3%, reducing the pvops overhead from 5 to 2%).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30 14:51:44 -08:00
Jeremy Fitzhardinge
319f3ba52c xen: move remaining mmu-related stuff into mmu.c
Impact: Cleanup

Move remaining mmu-related stuff into mmu.c.
A general cleanup, and lay the groundwork for later patches.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30 14:51:14 -08:00
H. Peter Anvin
9b7ed8faa0 Merge branch 'core/percpu' into x86/paravirt 2009-01-30 14:50:57 -08:00
Ingo Molnar
6b64ee02da x86, apic, 32-bit: add self-IPI methods
Impact: fix rare crash on 32-bit

The 32-bit APIC drivers had their send_IPI_self vectors set to NULL,
but ioapic_retrigger_irq() depends on it being always set. Fix it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 23:42:18 +01:00
Manuel Lauss
2d2eca4d11 MIPS: Alchemy: time.c build fix
In Linus' current -git the cpumask member is now a pointer.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:01 +00:00
Phil Sutter
0fc6bc0d6e MIPS: RB532: Export rb532_gpio_set_func()
This kernel symbol provides a way for drivers to switch on alternate
function for a certain GPIO pin. Turning it off is done implicitly when
changing the GPIO direction, as that would be fixed when using the given
pin als alternate function.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:01 +00:00
Phil Sutter
3828ee047d MIPS: RB532: Update headers
Remove the {set,get}_434_reg() prototypes, as the functions have been
removed. Also move the prototypes for {get,set}_latch_u5() to the correct
place.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:01 +00:00
Phil Sutter
1c4db8e828 MIPS: RB532: Simplify dev3 init
As rb532_dev3_ctl_res is not used by any platform device, it can be dropped
when not used for holding the physical address of the device 3 controller.

Also a size of one byte should suffice when ioremapping the physical
address mentioned above, as only a single byte is being read from and
written to it.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:01 +00:00
Phil Sutter
4ca3803f81 MIPS: RB532: Remove {get,set}_434_reg()
These kernel symbols are unused. Also, since dev3 init has been moved to
devices.c, set_434_reg() breaks compiling as it uses dev3.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
36f2db4b9c MIPS: RB532: Move dev3 init code to devices.c
This code doesn't belong to gpio.c, as it's completely unrelated to
GPIO. As dev1 and dev2 init code is in devices.c, it seems to be a more
adequate place.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
7060886fb7 MIPS: RB532: Fix set_latch_u5()
The data to be written is just a byte, so use writeb instead of writel.
Also, dev3.base contains the address, not the data so referencing here
is wrong.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
deb1003329 MIPS: RB532: Fix init of rb532_dev3_ctl_res
This register just contains the address of the actual resource, so
initialisation has to be the same as cf_slot0_res and nand_slot0_res.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
94d2cc1b8b MIPS: RB532: Use driver_data instead of platform_data
As the korina ethernet driver uses platform_get_drvdata() to extract the
driver specific data from the platform device, driver_data has to be
used here.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
1452fc7d17 MIPS: RB532: Detect uart type, add platform device
Auto-detection works just fine, so use it instead of specifying the type
manually. Also define a platform device for the uart, as suggested by
David Daney.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
84c2c562c1 MIPS: RB532: remove useless CF GPIO initialisation
As the pata-rb532-cf driver calls gpio_direction_input(), the calls to
rb532_gpio_set_func() and rb532_gpio_direction_input() are not needed since
the alternate function is automatically being disabled when changing the
GPIO pin direction.
The later two calls to rb532_gpio_set_{ilevel,istat}() are implicitly being
done by the IRQ initialisation of pata-rb532-cf.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
Phil Sutter
33763d571d MIPS: RB532: Auto disable GPIO alternate function
When a driver calls gpio_set_direction_{input,output}(), it obviously
doesn't want the alternate function for that pin to be active (as the
direction would not matter in that case). This patch ensures alternate
function is disabled when the direction is being changed.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
Phil Sutter
4aa0f4d726 MIPS: RB532: Add set_type() function to IRQ struct.
Interrupt Group 4 mapps the GPIO pins enabled as interrupt sources;
add defines to make this clear when addressing them later in code.

The mapped GPIOs support triggering on either level high or low. To
achieve this, the set_type() function calls rb532_gpio_set_ilevel() for
interrupts of the above mentioned group.

As there is no way to alter the triggering characteristics of the other
interrupts, accept level triggering on status high only. (This is just a
guess; but as the system boots fine and interrupt-driven devices (e.g.
serial console) work with no implications, it seems to be right.)

To clear a GPIO mapped IRQ, the source has to be cleared (i.e., the
interrupt status bit of the corresponding GPIO pin). This is done inside
rb532_disable_irq().

After applying these changes I could undo most of my former "fixes" to
pata-rb532-cf. Particularly all interrupt handling can be done
generically via set_irq_type() as it was before.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
Phil Sutter
fb91e2cb7d MIPS: RC32434: Define io_map_base for PCI controller
The code is rather based on trial-and-error than knowledge. Verified Via
Rhine functionality in PIO as well as MMIO mode.

[Looks sane -- Ralf]

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
Phil Sutter
5379a5fdf3 MIPS: RB532: Fix bit swapping in rb532_set_bit()
The algorithm works unconditionally. If bitval is one, the first line is
a no op and the second line sets the bit at offset position. Vice versa,
if bitval is zero, the first line clears the bit at offset position and
the second line is a no op.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
David Daney
f839490ab4 MIPS: Use hardware watchpoints on all R1 and R2 CPUs.
The previous definition inadvertently omits Octeon which currently is
treated as an architecture variant separate from MIPS32 and MIPS64.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
David Daney
8bc6d05b48 MIPS: Read watch registers with interrupts disabled.
If a context switch occurred between the watch exception and reading the
watch registers, it would be possible for the new process to corrupt their
state.  Enabling interrupts only after the watch registers are read avoids
this race.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
David Daney
7adbedaf44 MIPS: Fix a typo in watchpoint register structure.
This fixes the ptrace ABI for watch registers, and should allow 64bit
kernels to use the watch register support.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Atsushi Nemoto
65655b5a94 MIPS: TXx9: Add support for TX4939 internal RTC
Add platform support to use rtc-tx4939 driver.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Ralf Baechle
42fe7ee31f MIPS: R2: Fix broken installation of cache error handler.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Ralf Baechle
634286f127 MIPS: IP27: Switch from DMA_IP27 to DMA_COHERENT
The special IP27 DMA code selected by DMA_IP27 has been removed a while
ago turning DMA_IP27 into almost a nop.  Also fixup the broken logic of
its last users memcpy.S and memcpy-inatomic.s.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Ralf Baechle
732f0462d5 MIPS: Add return value checks to user_termio_to_kernel_termios()
And while at it, convert all functions from macros to inline functions
for sanity.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Huang Weiyi
2d8965156b MIPS: Octeon: Remove duplicated #includes
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Ralf Baechle
915ec1e216 MIPS: atomic_*(): Change type of intermediate variables.
This shaves of 1912 bytes of an IP27 defconfig kernel and avoids
unexpected overflow behaviour in atomic_sub_if_positive.  Apply the same
changes to the atomic64_* functions for consistency.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Ralf Baechle
c7c1e3846b MIPS: Port "mm: invoke oom-killer from page fault" from UML / x86
Original commit 1c0fe6e3bd.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Ralf Baechle
a8ca8b64e3 MIPS: Avoid destructive invalidation on partial cachelines.
See discussion e9c3a7c20901051031y528d0d31r18d44c5096c59e0@mail.gmail.com.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Ralf Baechle
012703e0fc MIPS: SMTC: Fix build after recent creditial changes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:56 +00:00
Jaswinder Singh Rajput
7cff3608d2 headers_check fix: x86, swab.h
fix the following 'make headers_check' warnings:

  usr/include/asm/swab.h:4: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/swab.h:7: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31 00:19:32 +05:30
Jaswinder Singh Rajput
2de548faa7 headers_check fix: x86, sigcontext32.h
fix the following 'make headers_check' warning:

  usr/include/asm/sigcontext32.h:20: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31 00:18:58 +05:30
Jaswinder Singh Rajput
e59afe6a21 headers_check fix: x86, sigcontext.h
fix the following 'make headers_check' warnings:

  usr/include/asm/sigcontext.h:5: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/sigcontext.h:24: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31 00:18:30 +05:30
Jaswinder Singh Rajput
420ab35eef headers_check fix: x86, ptrace-abi.h
fix the following 'make headers_check' warnings:

  usr/include/asm/ptrace-abi.h:86: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/ptrace-abi.h:93: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31 00:18:03 +05:30
Jaswinder Singh Rajput
d122072cc0 headers_check fix: x86, mtrr.h
fix the following 'make headers_check' warning:

  usr/include/asm/mtrr.h:61: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31 00:17:39 +05:30
Jaswinder Singh Rajput
999b697b9d headers_check fix: x86, mce.h
fix the following 'make headers_check' warnings:

  usr/include/asm/mce.h:7: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/mce.h:29: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31 00:17:13 +05:30
Jaswinder Singh Rajput
cef3767852 headers_check fix: x86, kvm.h
fix the following 'make headers_check' warnings:

  usr/include/asm/kvm.h:9: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/kvm.h:16: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31 00:16:44 +05:30
Jaswinder Singh Rajput
999721ca6d headers_check fix: x86, e820.h
fix the following 'make headers_check' warning:

  usr/include/asm/e820.h:44: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31 00:16:22 +05:30