Commit graph

64,840 commits

Author SHA1 Message Date
Ingo Molnar
cb9c34e6d0 Merge commit 'v2.6.28-rc7' into core/locking 2008-12-04 08:52:14 +01:00
Ronen Shitrit
fb6f552930 [ARM] Orion: add the option to support different ehci phy initialization
The Orion ehci driver serves the Orion, kirkwood and DD Soc families.
Since each of those integrate a different USB phy we should have the
ability to use few initialization sequences or to leave the boot loader
phy settings as is.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
2008-12-04 01:28:14 -05:00
James Morris
ec98ce480a Merge branch 'master' into next
Conflicts:
	fs/nfsd/nfs4recover.c

Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().

Signed-off-by: James Morris <jmorris@namei.org>
2008-12-04 17:16:36 +11:00
Joseph Myers
726c12f57d sparc64: Fix VIS emulation bugs
This patch fixes some bugs in VIS emulation that cause the GCC test
failure

FAIL: gcc.target/sparc/pdist-3.c execution test

for both 32-bit and 64-bit testing on hardware lacking these
instructions.  The emulation code for the pdist instruction uses
RS1(insn) for both source registers rs1 and rs2, which is obviously
wrong and leads to the instruction doing nothing (the observed
problem), and further inspection of the code shows that RS1 uses a
shift of 24 and RD a shift of 25, which clearly cannot both be right;
examining SPARC documentation indicates the correct shift for RS1 is
14.

This patch fixes the bug if single-stepping over the affected
instruction in the debugger, but not if the testcase is run
standalone.  For that, Wind River has another patch I hope they will
send as a followup to this patch submission.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 19:36:05 -08:00
David Howells
004b50f4ed MN10300: Introduce barriers to replace removed volatiles in gdbstub 16550 driver
Introduce into the MN10300 gdbstub 16550 driver a couple of barrier() calls to
replace the removed volatility of the input/output index variables for the Rx
ring buffer.  A previous patch added them into the on-chip serial port driver.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-03 16:47:40 -08:00
Rusty Russell
e8e8e80ee0 sparc: asm/bitops.h should define __fls
bitops_64.h includes the generic one; pretty sure 32 should too.

(Found by using __fls in generic code and breaking sparc defconfig build:
 thanks Stephen and linux-next!)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 16:04:52 -08:00
wanzongshun
7ec80ddf04 [ARM] 5338/1: Add Nuvoton W90P910 Platform support
Add Nuvoton W90X900 ARM9 plat support to linux arm tree,
Now, this patch include only W90P910 EVB of W90P910 CPU,
Its driver is nothing.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-03 21:57:16 +00:00
Haiying Wang
361425fc32 powerpc/85xx: Create dts for each core in CAMP mode for MPC8572DS
This patch creates the dts files for each core and splits the devices
between the two cores for MPC8572DS.

core0 has memory, L2, i2c, dma1, global-util, eth0, eth1, crypto, pci0, pci1.
core1 has L2, dma2, eth2, eth3, pci2, msi.

MPIC is shared between two cores but each core will protect its interrupts
from other core by using "protected-sources" of mpic.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 15:11:52 -06:00
Mike Frysinger
fd54f50284 kbuild: use KECHO convenience echo
Convert a few echos in the build system to new $(kecho) so we get correct
output according to build verbosity.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: added kecho in a few more places for O=... builds]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03 21:32:01 +01:00
Ingo Molnar
66a05d6b47 Merge branch 'oprofile-for-tip' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into x86/urgent 2008-12-03 18:52:46 +01:00
Haiying Wang
06be64a366 powerpc/85xx: Don't reset the MPIC for CAMP mode on MPC8572DS
The flag MPIC_WANTS_RESET shouldn't be set if we are doing cooperative
asymmetric MP.  The second linux shouldn't reset the pic or the first
one gets very confused.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 10:51:01 -06:00
Haiying Wang
c64ef80b51 powerpc/85xx: Add localbus node in mpc8572ds dts file
Also add NOR and NAND flash partitions for mpc8572ds board

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 10:47:38 -06:00
Martyn Welch
965dc5fc55 powerpc/86xx: Basic GPIO support for GE Fanuc SBC610
Basic support for the GPIO available on the SBC610 VPX Single Board Computer
from GE Fanuc (PowerPC MPC8641D).

This patch adds basic support for the GPIO in the devices I/O FPGA, the GPIO
functionality is exposed through the AFIX pins on the backplane, unless used
by an AFIX card.

This code currently does not support switching between totem-pole and
open-drain outputs (when used as outputs, GPIOs default to totem-pole).
The interrupt capabilites of the GPIO lines is also not currently supported.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 10:47:37 -06:00
Anton Vorontsov
09a3fba8c1 powerpc/qe: Move cmxgcr_lock definition from the ucc.c into the qe.c
With this patch we can compile the qe_lib/usb.c without the UCC
support (that is, without UCC_GETH and/or SERIAL_QE).

Fixes following link error (CONFIG_SMP should be =y to trigger this):

arch/powerpc/sysdev/built-in.o: In function `qe_usb_clock_set':
(.text+0x3cae): undefined reference to `cmxgcr_lock'
make: *** [.tmp_vmlinux1] Error 1

While at it, also add missing spinlock.h includes.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-By: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 10:47:36 -06:00
Martyn Welch
d3a8cdab2f powerpc/86xx: Add use of Epson RTX-8581 RTC to GE Fanuc SBC610 dts
Adding use of newly added Epson RTX-8581 real-time clock driver to GE
Fanuc SBC610's dts file and adding driver to default config.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 10:47:35 -06:00
Kumar Gala
24a99596f7 powerpc/85xx: Fix compile warnings in mpc85xx_mds.c
arch/powerpc/platforms/85xx/mpc85xx_mds.c: In function 'board_fixups':
arch/powerpc/platforms/85xx/mpc85xx_mds.c:244: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t'
arch/powerpc/platforms/85xx/mpc85xx_mds.c:250: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 10:46:37 -06:00
William Cohen
3d337c653c x86/oprofile: fix Intel cpu family 6 detection
Alan Jenkins wrote:
> This is on an EeePC 701, /proc/cpuinfo as attached.
>
> Is this expected?  Will the next release work?
>
> Thanks, Alan
>
> # opcontrol --setup --no-vmlinux
> cpu_type 'unset' is not valid
> you should upgrade oprofile or force the use of timer mode
>
> # opcontrol -v
> opcontrol: oprofile 0.9.4 compiled on Nov 29 2008 22:44:10
>
> # cat /dev/oprofile/cpu_type
> i386/p6
> # uname -r
> 2.6.28-rc6eeepc

Hi Alan,

Looking at the kernel driver code for oprofile it can return the "i386/p6" for
the cpu_type. However, looking at the user-space oprofile code there isn't the
matching entry in libop/op_cpu_type.c or the events/unit_mask files in
events/i386 directory.

The Intel AP-485 says this is a "Intel Pentium M processor model D". Seems like
the oprofile kernel driver should be identifying the processor as "i386/p6_mobile"

The driver identification code doesn't look quite right in nmi_init.c

http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=blob;f=arch/x86/oprofile/nmi_int.c;h=022cd41ea9b4106e5884277096e80e9088a7c7a9;hb=HEAD

has:

409         case 10 ... 13:
410                 *cpu_type = "i386/p6";
411                 break;

Referring to the Intel AP-485:
case 10 and 11 should produce "i386/piii"
case 13 should produce "i386/p6_mobile"

I didn't see anything for case 12.

Something like the attached patch. I don't have a celeron machine to verify that
changes in this area of the kernel fix thing.

-Will

Signed-off-by: William Cohen <wcohen@redhat.com>
Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-03 17:17:17 +01:00
Anton Vorontsov
dafdb61313 powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts
Just found the merge issue in 442746989d
("powerpc/83xx: Add support for MCU microcontroller in .dts files"):
the commit adds the MCU controller node into the DMA node, which is
wrong because the MCU sits on the I2C bus. Fix this by moving the MCU
node into the I2C controller node.

The original patch[1] was OK though. ;-)

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 09:56:02 -06:00
Eric Dumazet
9ea84ad77d oprofile: fix CPU unplug panic in ppro_stop()
If oprofile statically compiled in kernel, a cpu unplug triggers
a panic in ppro_stop(), because a NULL pointer is dereferenced.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-03 15:58:51 +01:00
Kumar Gala
d5b26db2cf powerpc/85xx: Add support for SMP initialization
Added 85xx specifc smp_ops structure.  We use ePAPR style boot release
and the MPIC for IPIs at this point.

Additionally added routines for secondary cpu entry and initializtion.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 08:19:20 -06:00
Kumar Gala
06b90969a7 powerpc/85xx: minor head_fsl_booke.S cleanup
Removed unused branch labels

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 08:19:19 -06:00
Trent Piepho
b389889535 powerpc: Better setup of boot page TLB entry
The initial TLB mapping for the kernel boot didn't set the memory coherent
attribute, MAS2[M], in SMP mode.

If this code supported booting a secondary processor, which it doesn't yet,
but if it did, then when a secondary processor boots, it would probably signal
the primary processor by setting a variable called something like
__secondary_hold_acknowledge.  However, due to the lack of the M bit, the
primary processor would not snoop the transaction (even if a transaction were
broadcast).  If primary CPU's L1 D-cache had a copy, it would not be flushed
and the CPU would never see the ack.  Which would have resulted in the primary
CPU spinning for a long time, perhaps a full second before it gives up, while
it would have waited for the ack from the secondary CPU that it wouldn't have
been able to see because of the stale cache.

The value of MAS2 for the boot page TLB1 entry is a compile time constant,
so there is no need to calculate it in powerpc assembly language.

Also, from the MPC8572 manual section 6.12.5.3, "Bits that represent
offsets within a page are ignored and should be cleared." Existing code
didn't clear them, this code does.

The same when the page of KERNELBASE is found; we don't need to use asm to
mask the lower 12 bits off.

In the code that computes the address to rfi from, don't hard code the
offset to 24 bytes, but have the assembler figure that out for us.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 08:19:18 -06:00
Liu Yu
6a800f36ac powerpc: Add SPE/EFP math emulation for E500v1/v2 processors.
This patch add the handlers of SPE/EFP exceptions.
The code is used to emulate float point arithmetic,
when MSR(SPE) is enabled and receive EFP data interrupt or EFP round interrupt.

This patch has no conflict with or dependence on FP math-emu.

The code has been tested by TestFloat.

Now the code doesn't support SPE/EFP instructions emulation
(it won't be called when receive program interrupt),
but it could be easily added.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 08:19:16 -06:00
Liu Yu
033b8a333c powerpc/math-emu: Remove redundant 'ret'
FP_DECL_EX is already used, so ret is redundant.
And FP_SET_EXCEPTION will add status into return value.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 08:19:15 -06:00
Liu Yu
463a8c01e1 powerpc/math-emu: Adopt new version of _FP_CHOOSENAN
Move to using the same macro definition for _FP_CHOOSENAN as s390,
sh, sparc32/64.  The original author didn't understand this and
matched what sparc64 was doing and they have updated to this definition.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 08:19:14 -06:00
Liu Yu
cf03033658 powerpc/math-emu: Fix single float point division bug
PowerPC float point division emulation is derived from gcc.
I reported this problem on gcc maillist and got this reply:
http://gcc.gnu.org/ml/gcc/2008-03/msg00543.html

Since UDIV_NEEDS_NORMALIZATION is not used by kernel, we should use
_FP_DIV_MEAT_1_udiv_norm to make sure the single float point
is normalized before udiv_qrnnd.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 08:19:12 -06:00
Kumar Gala
55b9121b42 powerpc: Remove unncessary SPE related compiler flag
After testing of various compiler flag combinations by Nate Case it was
determined that -mabi=no-spe has no impact on the compiler generating
SPE instructions.  Only -mno-spe and -mspe=no do.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 08:19:10 -06:00
Ingo Molnar
c36910c147 Merge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent 2008-12-03 12:54:45 +01:00
Joerg Roedel
09ee17eb8e AMD IOMMU: fix possible race while accessing iommu->need_sync
The access to the iommu->need_sync member needs to be protected by the
iommu->lock. Otherwise this is a possible race condition. Fix it with
this patch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-03 12:20:46 +01:00
Joerg Roedel
f91ba19064 AMD IOMMU: set device table entry for aliased devices
In some rare cases a request can arrive an IOMMU with its originial
requestor id even it is aliased. Handle this by setting the device table
entry to the same protection domain for the original and the aliased
requestor id.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-03 12:20:46 +01:00
Richard Kennedy
eac9fbc6a9 AMD IOMMU: struct amd_iommu remove padding on 64 bit
Remove 16 bytes of padding from struct amd_iommu on 64bit builds
reducing its size to 120 bytes, allowing it to span one fewer
cachelines.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-03 12:20:46 +01:00
Anton Vorontsov
3f3b163202 powerpc and sparc: Introduce dev_archdata node accessors
The name of the device_node field differ across the platforms, so we
have to implement inlined accessors.  This is needed to avoid ugly
#ifdef in the generic code.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 21:03:54 +11:00
Sebastien Dugue
6358d6cb32 powerpc/ibmebus: Get rid of the IRQ mapping in ibmebus_free_irq()
ibmebus_free_irq() frees the IRQ but does not remove its mapping, which
results in stale entries in the map.

This fixes it by adding a call to irq_dispose_mapping() in
ibmebus_free_irq().

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:36 +11:00
Julia Lawall
786b32f892 powerpc: Eliminate NULL test and memset after alloc_bootmem
As noted by Akinobu Mita in commit b1fceac2 ("x86: remove unnecessary
memset and NULL check after alloc_bootmem()"), alloc_bootmem and
related functions never return NULL and always return a zeroed region
of memory.  Thus a NULL test or memset after calls to these functions
is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:36 +11:00
Becky Bruce
15e09c0eca powerpc: Add sync_*_for_* to dma_ops
We need to swap these out once we start using swiotlb, so add
them to dma_ops.  Create CONFIG_PPC_NEED_DMA_SYNC_OPS Kconfig
option; this is currently enabled automatically if we're
CONFIG_NOT_COHERENT_CACHE.  In the future, this will also
be enabled for builds that need swiotlb.  If PPC_NEED_DMA_SYNC_OPS
is not defined, the dma_sync_*_for_* ops compile to nothing.
Otherwise, they access the dma_ops pointers for the sync ops.

This patch also changes dma_sync_single_range_* to actually
sync the range - previously it was using a generous
dma_sync_single.  dma_sync_single_* is now implemented
as a dma_sync_single_range with an offset of 0.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:36 +11:00
Johannes Berg
c4d04be11f powerpc: Allow the max stack trace depth to be configured
On my screen, when something crashes, I only have space for maybe 16
functions of the stack trace before the information above it scrolls
off the screen.  It's easy to hack the kernel to print out only that
much, but it's harder to remember to do it.  This introduces a config
option for it so that I can keep the setting in my config.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:35 +11:00
Kumar Gala
0186f47e70 powerpc: Use RCU based pte freeing mechanism for all powerpc
Refactor the RCU based pte free code that was used on ppc64 to be used
on all powerpc.

Additionally refactor pte_free() & pte_free_kernel() into common code
between ppc32 & ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:35 +11:00
Kumar Gala
df3b861155 powerpc: Add a local_flush_tlb_page to handle kmap_atomic invalidates
The tlb invalidates in kmap_atomic/kunmap_atomic can be called from
IRQ context, however they are only local invalidates (on the processor
that the kmap was called on).  In the future we want to use IPIs to
do tlb invalidates this causes issue since flush_tlb_page() is considered
a broadcast invalidate.

Add local_flush_tlb_page() as a non-broadcast invalidate and use it in
kmap_atomic() since we don't have enough information in the
flush_tlb_page() call to determine its local.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:35 +11:00
Kumar Gala
f4f3a1261a powerpc: hash_page_sync should only be used on SMP & STD_MMU_32
Clean up the ifdefs so we only use hash_page_sync if we have
CONFIG_SMP && CONFIG_PPC_STD_MMU_32.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:35 +11:00
Benjamin Herrenschmidt
4ee5f55175 powerpc: Fix ppc32 mm_struct CPU tracking in SMP
The 32-bit hash code didn't need it so far so we don't update
mm->cpu_vm_mask on context switch.  This however will break when we
merge the RCU based page table freeing patch and other upcoming 32-bit
embedded SMP work, so this adds the update.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:35 +11:00
Kumar Gala
1b98326b91 powerpc: Add MSR[CE, DE] to the MSR bits we print on show_regs()
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:35 +11:00
Paul Mackerras
5274918855 Merge branch 'merge' 2008-12-03 20:11:06 +11:00
Joerg Roedel
70d7d35757 x86: fix broken flushing in GART nofullflush path
Impact: remove stale IOTLB entries

In the non-default nofullflush case the GART is only flushed when
next_bit wraps around. But it can happen that an unmap operation unmaps
memory which is behind the current next_bit location. If these addresses
are reused it may result in stale GART IO/TLB entries. Fix this by
setting the GART next_bit always behind an unmapped location.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 10:02:41 +01:00
Chris Torek
ee4ee52727 sparc64: Fix bug in PTRACE_SETFPREGS64 handling.
From: Chris Torek <chris.torek@windriver.com>

>The SPARC64 kernel code for PTRACE_SETFPREGS64 appears to be an exact copy 
>of that for PTRACE_GETFPREGS64.  This means that gdbserver and native 
>64-bit GDB cannot set floating-point registers.

It looks like a simple typo.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 00:47:28 -08:00
Steven Rostedt
62679efe0a ftrace: add checks on ret stack in function graph
Import: robustness checks

Add more checks in the function graph code to detect errors and
perhaps print out better information if a bug happens.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:27 +01:00
Steven Rostedt
e49dc19c6a ftrace: function graph return for function entry
Impact: feature, let entry function decide to trace or not

This patch lets the graph tracer entry function decide if the tracing
should be done at the end as well. This requires all function graph
entry functions return 1 if it should trace, or 0 if the return should
not be traced.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:26 +01:00
Steven Rostedt
7ee991fbc6 ftrace: print real return in dumpstack for function graph
Impact: better dumpstack output

I noticed in my crash dumps and even in the stack tracer that a
lot of functions listed in the stack trace are simply
return_to_handler which is ftrace graphs way to insert its own
call into the return of a function.

But we lose out where the actually function was called from.

This patch adds in hooks to the dumpstack mechanism that detects
this and finds the real function to print. Both are printed to
let the user know that a hook is still in place.

This does give a funny side effect in the stack tracer output:

        Depth   Size      Location    (80 entries)
        -----   ----      --------
  0)     4144      48   save_stack_trace+0x2f/0x4d
  1)     4096     128   ftrace_call+0x5/0x2b
  2)     3968      16   mempool_alloc_slab+0x16/0x18
  3)     3952     384   return_to_handler+0x0/0x73
  4)     3568    -240   stack_trace_call+0x11d/0x209
  5)     3808     144   return_to_handler+0x0/0x73
  6)     3664    -128   mempool_alloc+0x4d/0xfe
  7)     3792     128   return_to_handler+0x0/0x73
  8)     3664     -32   scsi_sg_alloc+0x48/0x4a [scsi_mod]

As you can see, the real functions are now negative. This is due
to them not being found inside the stack.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:25 +01:00
Steven Rostedt
14a866c567 ftrace: add ftrace_graph_stop()
Impact: new ftrace_graph_stop function

While developing more features of function graph, I hit a bug that
caused the WARN_ON to trigger in the prepare_ftrace_return function.
Well, it was hard for me to find out that was happening because the
bug would not print, it would just cause a hard lockup or reboot.
The reason is that it is not safe to call printk from this function.

Looking further, I also found that it calls unregister_ftrace_graph,
which grabs a mutex and calls kstop machine. This would definitely
lock the box up if it were to trigger.

This patch adds a fast and safe ftrace_graph_stop() which will
stop the function tracer. Then it is safe to call the WARN ON.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:23 +01:00
Steven Rostedt
bb4304c71c ftrace: have function graph use mcount caller address
Impact: consistency change for function graph

This patch makes function graph record the mcount caller address
the same way the function tracer does.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:22 +01:00
Steven Rostedt
347fdd9dd4 ftrace: clean up function graph asm
Impact: clean up

There exists macros for x86 asm to handle x86_64 and i386.
This patch updates function graph asm to use them.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:21 +01:00