Commit graph

64,840 commits

Author SHA1 Message Date
Anton Vorontsov
8b77aeb4f5 powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
The RTC is sitting on the I2C1 bus at address 0x68. RTC interrupt signal
is connected to the IPIC's EXT3 interrupt line.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:59 -05:00
Timur Tabi
43c9f43492 powerpc: remove support for bootmem-allocated memory for the DIU driver
Early versions of the Freescale DIU framebuffer driver depended on a bootmem
allocation of memory for the video buffer.  The need for this feature was
removed in commit 6b51d51a, so now we can remove the platform-specific code
that allocated that memory.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:59 -05:00
Milton Miller
9bd54d185a powerpc: remove non-dependent load fsl_booke PTE_64BIT
b38fd42ff4 added false dependencys
to order the load of upper and lower halfs of the pte, but only
adjusted whitespace instead of deleting the old load in the iside
handler, letting the hardware see the non-dependent load.

This patch removes the extra load.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:59 -05:00
John Rigby
35225802e2 powerpc/5121: Add PCI support.
Uses mpc83xx_add_bridge in fsl_pci.c

Adds second register tuple to pci node register property
as done for 83xx device trees in a previous patch.

Signed-off-by: John Rigby <jrigby@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
John Rigby
5b70a09705 powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge.
Modify mpc83xx_add_bridge to get config space register base address from
the device tree instead of immr + hardcoded offset.

83xx pci nodes have this change:
    register properties now contain two address length tuples:
	First is the pci bridge register base, this has always been there.
	Second is the config base, this is new.

This is documented in dts-bindings/fsl/83xx-512x-pci.txt

The changes accomplish these things:
    mpc83xx_add_bridge no longer needs to call get_immrbase
    it uses hard coded addresses if the second register value is missing

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
John Rigby
4a015c3740 powerpc/fsl: Hide MPC5121 pci bridge.
The class of the MPC5121 pci host bridge is PCI_CLASS_BRIDGE_OTHER
while other freescale host bridges have class set to
PCI_CLASS_PROCESSOR_POWERPC.

This patch makes fixup_hide_host_resource_fsl match
PCI_CLASS_BRIDGE_OTHER in addition to PCI_CLASS_PROCESSOR_POWERPC.

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
Anton Vorontsov
62666828ba powerpc/83xx: don't probe broken PCI on mpc837x_mds boards
In the standalone setup the board's CPLD disables the PCI internal
arbiter, thus any access to the PCI bus will hang the board.

The common way to disable particular devices in the device tree is to
put the "status" property with any value other than "ok" or "okay"
into the device node we want to disable.

So, when there is no PCI arbiter on the bus the u-boot adds status =
"broken (no arbiter)" property into the PCI controller's node, and so
marks the PCI controller as unavailable.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
Anton Vorontsov
5c091193e4 powerpc/QE: move QE_GPIO Kconfig symbol into the platforms/Kconfig
Specifying user-selectable option in the qe_lib/Kconfig was a bad idea
because the qe_lib/Kconfig is included into the top level Kconfig, and
thus the QE_GPIO option appears at the top level menu.

This patch effectively moves the QE_GPIO option under the platform menu
instead.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
Timur Tabi
4e330bcf6b powerpc: make Freescale QE support a selectable Kconfig option
Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable
option, thereby allowing users to compile kernels without any QE support.

The drawback is that QE support is now disabled by default on platforms that
have a QE, and so a defconfig is needed to enable QE and QE devices (like
UCC GETH).  Fortunately, all the current relevant defconfigs do that already.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
Martyn Welch
3a47024791 powerpc: GE Fanuc's FPGA based PIC controller on the SBC610
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D).

A number of MPC8641D based route interrupts for on-board interrupts through
a FPGA based interrupt controller, which is chained with the
MPC8641D's mpic. This patch provides a basic driver to allow basic routing
of interrupts to the mpic.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:57 -05:00
Kumar Gala
92ae954046 powerpc/85xx: Wire up RTC interrupt on MPC8536DS
Add interrupt info to the MPC8536DS .dts for the RTC

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:57 -05:00
Linus Torvalds
891cffbd6b x86/mm: do not trigger a kernel warning if user-space disables interrupts and generates a page fault
Arjan reported a spike in the following bug pattern in v2.6.27:

   http://www.kerneloops.org/searchweek.php?search=lock_page

which happens because hwclock started triggering warnings due to
a (correct) might_sleep() check in the MM code.

The warning occurs because hwclock uses this dubious sequence of
code to run "atomic" code:

  static unsigned long
  atomic(const char *name, unsigned long (*op)(unsigned long),
         unsigned long arg)
  {
    unsigned long v;
    __asm__ volatile ("cli");
    v = (*op)(arg);
    __asm__ volatile ("sti");
    return v;
  }

Then it pagefaults in that "atomic" section, triggering the warning.

There is no way the kernel could provide "atomicity" in this path,
a page fault is a cannot-continue machine event so the kernel has to
wait for the page to be filled in.

Even if it was just a minor fault we'd have to take locks and might have
to spend quite a bit of time with interrupts disabled - not nice to irq
latencies in general.

So instead just enable interrupts in the pagefault path unconditionally
if we come from user-space, and handle the fault.

Also, while touching this code, unify some trivial parts of the x86
VM paths at the same time.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 17:46:39 +02:00
Haavard Skinnemoen
f040932fce avr32: Add defconfig for the mimc200 board
Provided by Mark Jackson.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 17:01:34 +02:00
Mark Jackson
5b50c166b7 avr32: Add MIMC200 board support
Please consider the following patch which adds support for a new AVR32
based board.

The board is closely based on Atmel's NGW100 reference board, but has an
extra 8MByte FLASH and 128KByte FRAM.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 16:36:25 +02:00
Mark Jackson
198f29358a avr32: Fix MIMC200 board use of SPD network pins
The MIMC200 board uses the SPD output pin from the Ethernet MACs for
other purposes.

One of these is as a board-reset, so I've had to #define off the SPD
output pin declaration.

This is probably not the best way of achieving this, but works in the
current framework.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 16:36:11 +02:00
Hans-Christian Egtvedt
45c349b58c avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.

This kit, which is also called ezLCD-101, has a 10.4" touch screen LCD panel,
16 MB 32-bit SDRAM, 8 MB parallel flash, Ethernet, audio out, USB device,
SD-card slot, USART and various other connectors for cennecting stuff to SPI,
I2C, GPIO, etc.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 16:01:18 +02:00
Ingo Molnar
c00193f9f0 Merge branches 'oprofile-v2' and 'timers/hpet' into x86/core-v4 2008-10-13 14:18:42 +02:00
Hans-Christian Egtvedt
a3bee42f05 avr32: Add support for EVKLCD10X addon boards
This patch lets the user enable support for EVKLCD100 and EVKLCD101
(refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD
controller and AC97 controller platform devices are added.

The user can also choose between the EVKLCD100 (QVGA display) and the
EVKLCD101 (VGA display), this is added to automagically select the
correct panel timing and resolution parameters.

Enabling support for EVKLCD10X addon board will cripple the MCI platform
device a bit since they share two GPIO lines (detect and write-protect).
These two lines are disabled when EVKLCD10X is enabled.

The default configurations are based upon ATNGW100, but with added AC97C
and LCDC driver. Virtual terminal is also enabled by default for
EVKLCD10X boards.

Verified on hardware with a NGW100 + EVKLCD100/101.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 12:56:24 +02:00
Haavard Skinnemoen
1d3ba686ed avr32: Kconfig: Remove pointless if around atstk1000 include
The contents of the ATSTK1000 Kconfig file itself is completely
conditional, so including it conditionally makes no sense and only adds
clutter.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 12:48:14 +02:00
Sonic Zhang
deffc6edac Blackfin arch: fix bug - some serial header files set RTS to an input when they should all be outputs
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-13 17:42:12 +08:00
Ingo Molnar
accba5f396 Merge branch 'linus' into oprofile-v2
Conflicts:
	arch/x86/kernel/apic_32.c
	arch/x86/oprofile/nmi_int.c
	include/linux/pci_ids.h
2008-10-13 11:05:51 +02:00
Ingo Molnar
c493756e2a Merge branch 'linus' into oprofile
Conflicts:
	arch/x86/kernel/apic_32.c
	include/linux/pci_ids.h
2008-10-13 10:52:30 +02:00
Yinghai Lu
c1a2f4b108 x86: change early_ioremap to use slots instead of nesting
so we could remove the requirement that one needs to call
early_iounmap() in exactly reverse order of early_ioremap().

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:34:23 +02:00
Jan Beulich
79aa10dd9f x86: adjust dependencies for CONFIG_X86_CMOV
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:50 +02:00
Alexander van Heukelum
6a2ae2d9f9 dumpstack: x86: various small unification steps, fix
After "dumpstack: x86: various small unification steps", the
assembler gives the following compile error. The error is in
dumpstack_64.c.

{standard input}: Assembler messages:
{standard input}:720: Error: Incorrect register `%rbx' used with `l' suffix
{standard input}:1340: Error: Incorrect register `%r12' used with `l' suffix

Indeed the suffix in get_bp() was wrong.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:49 +02:00
Thomas Gleixner
cb48bb5999 x86: remove additional_cpus
remove remainder of additional_cpus logic. We now just listen to the
disabled_cpus value like we did for years. disabled_cpus is always >=
0 so no need for an extra check.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:48 +02:00
Ingo Molnar
b807305059 x86: remove additional_cpus configurability
additional_cpus=<x> parameter is dangerous and broken: for example
if we boot additional_cpus=-2 on a stock dual-core system it will
crash the box on bootup.

So reduce the maze of code a bit by removingthe user-configurability
angle.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:47 +02:00
Thomas Gleixner
649c6653fa x86: improve UP kernel when CPU-hotplug and SMP is enabled
num_possible_cpus() can be > 1 when disabled CPUs have been accounted.

Disabled CPUs are not in the cpu_present_map, so we can use
num_present_cpus() as a safe indicator to switch to UP alternatives.

Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:46 +02:00
Alexander van Heukelum
8a541665b9 dumpstack: x86: various small unification steps
- define STACKSLOTS_PER_LINE and use it
 - define get_bp macro to hide the %%ebp/%%rbp difference
 - i386: check task==NULL in dump_trace, like x86_64
 - i386: show_trace(NULL, ...) uses current automatically
 - x86_64: use [#%d] for die_counter, like i386
 - whitespace and comments

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:45 +02:00
Alexander van Heukelum
802a67de0c dumpstack: i386: make kstack= an early boot-param and add oops=panic
- make kstack= and early_param
 - add oops=panic, setting panic_on_oops

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:44 +02:00
Alexander van Heukelum
ca0a816403 dumpstack: x86: use log_lvl and unify trace formatting
- x86: Write log_lvl strings if available
 - start raw stack dumps on new line
 - i386: Remove extra indentation for raw stack dumps

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:43 +02:00
Alexander van Heukelum
2ac53721f3 dumptrace: x86: consistently include loglevel, print stack switch
- i386 and x86_64: always printk the 'data' parameter
 - i386: announce stack switch (irq -> normal)
 - i386: check if there is a stack switch before announcing it

There is a warning that 'context' might come out corrupt in early
boot. If this is true it should be fixed, not worked around.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:42 +02:00
Alexander van Heukelum
3a18512db0 dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stack
- Add "end" parameter to valid_stack_ptr and print_context_stack
 - use sizeof(long) as the size of a word on the stack

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:41 +02:00
Alexander van Heukelum
161827903b dumpstack: x86: make printk_address equal
- x86_64: use %p to print an address
 - make i386-version the same as the above

The result should be the same on x86_64; on i386 the
output only changes if CONFIG_KALLSYMS is turned off,
in which case the address is printed twice.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:40 +02:00
Alexander van Heukelum
dd6e4eba1c dumpstack: x86: move die_nmi to dumpstack_32.c
For some reason die_nmi is still defined in traps.c for
i386, but is found in dumpstack_64.c for x86_64. Move it
to dumpstack_32.c

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:39 +02:00
Alexander van Heukelum
8728861b4f traps: x86: finalize unification of traps.c
traps_32.c and traps_64.c are now equal. Move one to traps.c,
delete the other one and change the Makefile

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:29 +02:00
Alexander van Heukelum
081f75bbdc traps: x86: make traps_32.c and traps_64.c equal
Use CONFIG_X86_64/CONFIG_X86_32 to condtionally compile the
parts needed for x86_64 or i386 only.

Runs a small userspace for a number of minimal configurations
and boots the defconfigs.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:28 +02:00
Alexander van Heukelum
c1d518c842 traps: x86: various noop-changes preparing for unification of traps_xx.c
- reordering include files
 - whitespace changes
 - comment changes
 - removed unused bad_intr()
 - make default_do_nmi static

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:27 +02:00
Alexander van Heukelum
a5ae2330a5 traps: x86_64: use task_pid_nr(tsk) instead of tsk->pid in do_general_protection
Use task_pid_nr(tsk) instead of tsk->pid in do_general_protection.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:26 +02:00
Alexander van Heukelum
7970479c48 traps: i386: expand clear_mem_error and remove from mach_traps.h
This is the last user of clear_mem_error, which is defined
only on i386. Expand the inline function and remove it from
include/asm-x86/mach-default/mach_traps.h

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:25 +02:00
Alexander van Heukelum
1c9af8a9f4 traps: x86_64: make io_check_error equal to the one on i386
Make io_check_error equal to the one on i386.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:24 +02:00
Alexander van Heukelum
4915a35e35 traps: i386: use preempt_conditional_sti/cli in do_int3
Use preempt_conditional_sti/cli in do_int3, like on x86_64.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:23 +02:00
Alexander van Heukelum
091d30c8f7 traps: x86_64: make math_state_restore more like i386
- rename variable me -> tsk
 - get thread and tsk like i386
 - expand used_math()
 - copy comment

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:22 +02:00
Alexander van Heukelum
699d2937d4 traps: x86: converge trap_init functions
- set_system_gate on i386 is really set_system_trap_gate
 - set_system_gate on x86_64 is really set_system_intr_gate
 - ist=0 means no special stack switch is done:
	- introduce STACKFAULT_STACK, DOUBLEFAULT_STACK, NMI_STACK,
		DEBUG_STACK and MCE_STACK as on x86_64.
	- use the _ist variants with XXX_STACK set to zero
 - remove set_system_gate

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

traps: x86: correct copy/paste bug: a trap is a GATE_TRAP

Fix copy/paste/forgot-to-edit bug in desc.h.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:22 +02:00
Alexander van Heukelum
3d2a71a596 x86, traps: converge do_debug handlers
Make the x86_64-version and the i386-version of do_debug
more similar.

 - introduce preempt_conditional_sti/cli to i386. The preempt-count
	is now elevated during the trap handler, like on x86_64. It
	does not run on a separate stack, however.
 - replace an open-coded "send_sigtrap"
 - copy some comments

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:21 +02:00
Alexander van Heukelum
e407d62088 x86, traps: introduce dotraplinkage
Mark the exception handlers with "dotraplinkage" to hide the
calling convention differences between i386 and x86_64.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:20 +02:00
Alexander van Heukelum
ae82157b3d x86, traps, i386: factor out lazy io-bitmap copy
x86_64 does not do the lazy io-bitmap dance. Putting it in
its own function makes i386's do_general_protection look
much more like x86_64's.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:19 +02:00
Alexander van Heukelum
a28680b4b8 x86, traps: split out math_error and simd_math_error
Split out math_error from do_coprocessor_error and simd_math_error
from do_simd_coprocessor_error, like on i386. While at it, add the
"error_code" parameter to do_coprocessor_error, do_simd_coprocessor_error
and do_spurious_interrupt_bug.

This does not change the generated code, but brings the declarations in
line with all the other trap handlers.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:18 +02:00
Alexander van Heukelum
6fcbede3fd x86_64: split out dumpstack code from traps_64.c
The dumpstack code is logically quite independent from the
hardware traps. Split it out into its own file.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:17 +02:00
Alexander van Heukelum
2bc5f927d4 i386: split out dumpstack code from traps_32.c
The dumpstack code is logically quite independent from the
hardware traps. Split it out into its own file.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:16 +02:00