Commit graph

64,840 commits

Author SHA1 Message Date
Mike Travis
6bca67f951 NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
* nr_cpu_ids should be used to allocate arrays based on the number of
    cpu's present.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:08 +02:00
Simon Arlott
e3a61b0a8c x86: add unknown_nmi_panic kernel parameter
It's not possible to enable the unknown_nmi_panic sysctl option
until init is run. It's useful to be able to panic the kernel
during boot too, this adds a parameter to enable this option.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:10:31 +02:00
Yinghai Lu
63b5d7af25 x86: add ->pre_time_init to x86_quirks
so NUMAQ can use that to call numaq_pre_time_init()

This allows us to remove a NUMAQ special from arch/x86/kernel/setup.c.

(and paves the way to remove the NUMAQ subarch)

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:25:52 +02:00
Yinghai Lu
64898a8bad x86: extend and use x86_quirks to clean up NUMAQ code
add these new x86_quirks methods:

	int *mpc_record;
	int (*mpc_apic_id)(struct mpc_config_processor *m);
	void (*mpc_oem_bus_info)(struct mpc_config_bus *m, char *name);
	void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
	void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
                                    unsigned short oemsize);

... and move NUMAQ related mps table handling to numaq_32.c.

also move the call to smp_read_mpc_oem() to smp_read_mpc() directly.

Should not change functionality, albeit it would be nice to get it
tested on real NUMAQ as well ...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:25:52 +02:00
Yinghai Lu
3c9cb6de1e x86: introduce x86_quirks
introduce x86_quirks array of boot-time quirk methods.

No change in functionality intended.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:18:17 +02:00
Yinghai Lu
5f1f2b3d9d x86: improve debug printout: add target bootmem range in early_res_to_bootmem()
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:11:07 +02:00
Yinghai Lu
a83fe32fa6 x86, pci: detect end_bus_number according to acpi/e820 reserved, v2
Jack Howarth reported that 2.6.26-rc9-git9 doesn't boot on MacBookPro2.

the reason is a faulty BIOS update that reportes faulty resources.

Nevertheless it's possible for Linux to be more resolent about this
situation (and similar situations) and work around this bug, by
cross-checking the mmconf range against the e820 table and ACPI resources.

Change the mconf bus range from [0,0xff] to to [0, 0x3f]
to match range [0xf0000000, 0xf4000000) in e820 tables.

[ v2, yhlu.kernel@gmail.com:
  x86, pci: detect end_bus_number according to acpi/e820 reserved - fix ]

Reported-by: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: jbarnes@virtuousgeek.org
Cc: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 08:43:30 +02:00
Ingo Molnar
d092633bff Subject: devmem, x86: fix rename of CONFIG_NONPROMISC_DEVMEM
From: Arjan van de Ven <arjan@infradead.org>
Date: Sat, 19 Jul 2008 15:47:17 -0700

CONFIG_NONPROMISC_DEVMEM was a rather confusing name - but renaming it
to CONFIG_PROMISC_DEVMEM causes problems on architectures that do not
support this feature; this patch renames it to CONFIG_STRICT_DEVMEM,
so that architectures can opt-in into it.

( the polarity of the option is still the same as it was originally; it
  needs to be for now to not break architectures that don't have the
  infastructure yet to support this feature)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: "V.Radhakrishnan" <rk@atr-labs.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
2008-07-20 08:35:55 +02:00
Suresh Siddha
f586bf7df9 x86: APIC: Remove apic_write_around(); use alternatives, merge fix
On Fri, Jul 18, 2008 at 02:03:48PM -0700, Ingo Molnar wrote:
>
> * Yinghai Lu <yhlu.kernel@gmail.com> wrote:
>
> > > git merge tip/x86/x2apic
> > CONFLICT (content): Merge conflict in arch/x86/kernel/Makefile
> > CONFLICT (content): Merge conflict in arch/x86/kernel/paravirt.c
> > CONFLICT (content): Merge conflict in arch/x86/kernel/smpboot.c
> > CONFLICT (content): Merge conflict in arch/x86/kernel/vmi_32.c
> > CONFLICT (content): Merge conflict in arch/x86/xen/enlighten.c
> > CONFLICT (content): Merge conflict in include/asm-x86/apic.h
> > CONFLICT (content): Merge conflict in include/asm-x86/paravirt.h
>
> that's due to the changes in tip/x86/apic and in tip/x86/uv.
>
> ok, i've just merged x86/apic into x86/x2apic and x86/uv as well, and
> pushed out the result.
>
> Note: it's a first raw merge and completely untested. It will now merge
> cleanly into tip/master. There are probably a few details missing.

Ingo, thanks for doing this. While I was testing my merge changes, you posted
yours... anyhow we need this piece, which is missing from your merge.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-19 23:44:30 +02:00
Michael Hennerich
9db144fe89 Blackfin arch: Apply Bluetechnix CM-BF527 board support patch
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 17:16:07 +08:00
Robin Getz
f09630bff5 Blackfin arch: Add unwinding for stack info, and a little more detail on trace buffer
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-26 19:45:46 +08:00
Michael Hennerich
0a6304a951 Blackfin arch: Add ISP1760 board resources to BF548-EZKIT
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-26 16:14:57 +08:00
Mike Frysinger
cc2e16bd35 Blackfin arch: add missing IORESOURCE_MEM flags to UART3
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 16:43:51 +08:00
Thomas Gleixner
e338125b8a nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-19 09:44:33 +02:00
David Howells
e4f25060b8 sparc: Remove Sparc's asm-offsets for sclow.S
Remove Sparc's asm-offsets for sclow.S as the (E)UID/(E)GID size and
offset definitions will cease to be correct if COW credentials are
merged.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-19 00:44:32 -07:00
Sonic Zhang
262c3825a9 Blackfin arch: Extend sram malloc to handle L2 SRAM.
Extend system call to alloc L2 SRAM in application.
Automatically move following sections to L2 SRAM:
1. kernel built-in l2 attribute section
2. kernel module l2 attribute section
3. elf-fdpic application l2 attribute section

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 15:42:41 +08:00
Robin Getz
bafcc1b973 Blackfin arch: Remove useless config option.
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 15:11:15 +08:00
Sonic Zhang
5d481f4975 Blackfin arch: change L1 malloc to base on slab cache and lists.
Remove the sram piece limitation and improve the performance to
alloc/free sram piece data.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 14:51:31 +08:00
Yinghai Lu
e5849e71ad x86: remove arch_get_ram_range
no user now

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 17:43:40 -07:00
venkatesh.pallipadi@intel.com
fec0962e0b x86: Add a debugfs interface to dump PAT memtype
Add a debugfs interface to list out all the PAT memtype reservations.
Appears at debugfs x86/pat_memtype_list and output format is
type @ <start addr>-<end addr>

We do not hold the lock while printing the entire list. So, the list may not be
a consistent copy in case where regions are getting added or deleted
at the same time.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 17:22:05 -07:00
venkatesh.pallipadi@intel.com
ae79cdaacb x86: Add a arch directory for x86 under debugfs
Add a directory for x86 arch under debugfs. Can be used to accumulate all
x86 specific debugfs files.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 17:22:04 -07:00
Jan Beulich
2ddf9b7b3e i386/xen: add proper unwind annotations to xen_sysenter_target
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 16:05:55 -07:00
Jan Beulich
08ad8afaa0 x86: reduce force_mwait visibility
It's not used anywhere outside its single referencing file.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 15:55:09 -07:00
Jan Beulich
08e1a13e7d x86: reduce forbid_dac's visibility
It's not used anywhere outside its declaring file.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 14:39:37 -07:00
Bernhard Walle
91467bdf6e x86: move dma32_reserve_bootmem() after reserve_crashkernel()
On a x86-64 machine (nothing special I could encounter) I had the problem that
crashkernel reservation with the usual "64M@16M" failed. While debugging that,
I encountered that dma32_reserve_bootmem() reserves a memory region which is in
that area.

Because dma32_reserve_bootmem() does not rely on a specific offset but
crashkernel does, it makes sense to move the dma32_reserve_bootmem()
reservation down a bit. I tested that patch and it works without problems. I
don't see any negative effects of that move, but maybe I oversaw something ...

While we strictly don't need that patch in 2.6.27 because we have the
automatic, dynamic offset detection, it makes sense to also include it here
because:

  - it's easier to get it in -stable then,
  - many people are still used to the 'crashkernel=...@16M' syntax,
  - not everybody may be using a reloatable kernel.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: kexec@lists.infradead.org
Cc: vgoyal@redhat.com
Cc: akpm@linux-foundation.org
Cc: Bernhard Walle <bwalle@suse.de>
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 23:35:46 +02:00
Jan Beulich
369c99205f x86: fix two modpost warnings
Even though it's only the difference of the two __initdata symbols
that's being calculated, modpost still doesn't like this. So rather
calculate the size once in an __init function and store it for later
use.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 14:34:08 -07:00
Jan Beulich
f2ba93929f x86: check function status in EDD boot code
Without checking the return value of get_edd_info() and adding the
entry only in the success case, 6 devices show up under
/sys/firmware/edd/, no matter how many devices are actually present.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 14:33:17 -07:00
Ingo Molnar
9553e11325 Merge branch 'x86/uv' into x86/x2apic
Conflicts:

	arch/x86/kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 23:01:04 +02:00
Ingo Molnar
453c1404c5 Merge branch 'x86/apic' into x86/x2apic
Conflicts:

	arch/x86/kernel/paravirt.c
	arch/x86/kernel/smpboot.c
	arch/x86/kernel/vmi_32.c
	arch/x86/lguest/boot.c
	arch/x86/xen/enlighten.c
	include/asm-x86/apic.h
	include/asm-x86/paravirt.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 23:00:05 +02:00
Ingo Molnar
a208f37a46 Merge branch 'linus' into x86/x2apic 2008-07-18 22:50:34 +02:00
Hiroshi Shimamoto
812b121d55 x86_64: ia32_signal.c: remove signal number conversion
This was old code that was needed for iBCS and x86-64 never supported that.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:08:20 +02:00
Mike Travis
eb53fac5ca cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
* Use the CPUMASK_ALLOC macros in the centrino_target() function.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:03:00 +02:00
Mike Travis
c42f4f4c6d cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
* Optimize various places where a pointer to the cpumask_of_cpu value
    will result in reducing stack pressure.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:02:58 +02:00
Mike Travis
cb6d2be60d cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
* Optimize various places where a pointer to the cpumask_of_cpu value
    will result in reducing stack pressure.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:02:57 +02:00
Mike Travis
65c0118453 cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
* This patch replaces the dangerous lvalue version of cpumask_of_cpu
    with new cpumask_of_cpu_ptr macros.  These are patterned after the
    node_to_cpumask_ptr macros.

    In general terms, if there is a cpumask_of_cpu_map[] then a pointer to
    the cpumask_of_cpu_map[cpu] entry is used.  The cpumask_of_cpu_map
    is provided when there is a large NR_CPUS count, reducing
    greatly the amount of code generated and stack space used for
    cpumask_of_cpu().  The pointer to the cpumask_t value is needed for
    calling set_cpus_allowed_ptr() to reduce the amount of stack space
    needed to pass the cpumask_t value.

    If there isn't a cpumask_of_cpu_map[], then a temporary variable is
    declared and filled in with value from cpumask_of_cpu(cpu) as well as
    a pointer variable pointing to this temporary variable.  Afterwards,
    the pointer is used to reference the cpumask value.  The compiler
    will optimize out the extra dereference through the pointer as well
    as the stack space used for the pointer, resulting in identical code.

    A good example of the orthogonal usages is in net/sunrpc/svc.c:

	case SVC_POOL_PERCPU:
	{
		unsigned int cpu = m->pool_to[pidx];
		cpumask_of_cpu_ptr(cpumask, cpu);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, cpumask);
		return 1;
	}
	case SVC_POOL_PERNODE:
	{
		unsigned int node = m->pool_to[pidx];
		node_to_cpumask_ptr(nodecpumask, node);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, nodecpumask);
		return 1;
	}

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:02:57 +02:00
Ingo Molnar
bb2c018b09 Merge branch 'linus' into cpus4096
Conflicts:

	drivers/acpi/processor_throttling.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:00:54 +02:00
Dmitry Baryshkov
9de90ac27d Sh: use generic per-device coherent dma allocator
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 21:14:02 +02:00
Dmitry Baryshkov
1fe532685a ARM: support generic per-device coherent dma mem
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 21:14:01 +02:00
Ingo Molnar
f6dc8ccaab Merge branch 'linus' into core/generic-dma-coherent
Conflicts:

	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 21:13:20 +02:00
Ingo Molnar
9b610fda0d Merge branch 'linus' into timers/nohz 2008-07-18 19:53:16 +02:00
Stefan Assmann
41b9eb264c x86, pci: introduce config option for pci reroute quirks (was: [PATCH 0/3] Boot IRQ quirks for Broadcom and AMD/ATI)
This is against linux-2.6-tip, branch pci-ioapic-boot-irq-quirks.

From: Stefan Assmann <sassmann@suse.de>
Subject: Introduce config option for pci reroute quirks

The config option X86_REROUTE_FOR_BROKEN_BOOT_IRQS is introduced to
enable (or disable) the redirection of the interrupt handler to the boot
interrupt line by default. Depending on the existence of interrupt
masking / threaded interrupt handling in the kernel (vanilla, rt, ...)
and the maturity of the rerouting patch, users can enable or disable the
redirection by default.

This means that the reroute quirk can be applied to any kernel without
changing it.

Interrupt sharing could be increased if this option is enabled. However this
option is vital for threaded interrupt handling, as done by the RT kernel.
It should simplify the consolidation with the RT kernel.

The option can be overridden by either pci=ioapicreroute or
pci=noioapicreroute.

Signed-off-by: Stefan Assmann <sassmann@suse.de>
Signed-off-by: Olaf Dabrunz <od@suse.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Ihno Krumreich <ihno@suse.de>
Cc: Sven Dietrich <sdietrich@suse.de>
Cc: Daniel Gollub <dgollub@suse.de>
Cc: Felix Foerster <ffoerster@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 19:31:19 +02:00
Ingo Molnar
3e370b29d3 Merge branch 'linus' into x86/pci-ioapic-boot-irq-quirks
Conflicts:

	drivers/pci/quirks.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 19:31:12 +02:00
Alexander Beregalov
fa10c51a04 arch/x86/kernel/cpu/common_64.c: remove double inclusions
x86: remove double inclusions in arch/x86/kernel/cpu/common_64.c

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 19:25:28 +02:00
Suresh Siddha
511d9d3418 x86: apic_ops for lguest
apic_ops for lguest.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 19:06:13 +02:00
Suresh Siddha
9a8f0e6b5d x86: let 32bit use apic_ops too - fix
Fix VMI apic_ops.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 19:05:29 +02:00
Hiroshi Shimamoto
1181f8b5f0 x86_32: remove redundant KERN_INFO
This printk has a KERN_ facility level in the format string.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 19:01:04 +02:00
Jaswinder Singh
6ac8d51f01 x86: introducing asm-x86/traps.h
Declaring x86 traps under one hood.
Declaring x86 do_traps before defining them.

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 18:51:57 +02:00
Joerg Roedel
5ff4789d04 AMD IOMMU: set iommu for device from ACPI code too
The device<->iommu relationship has to be set from the information in the ACPI
table too. This patch adds this logic to the driver.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: iommu@lists.linux-foundation.org
Cc: bhavna.sarathy@amd.com
Cc: robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 18:43:32 +02:00
Ingo Molnar
f1b0c8d3d3 Merge branch 'linus' into x86/amd-iommu 2008-07-18 18:43:08 +02:00
Thomas Petazzoni
9781f39fd2 x86: consolidate the definition of the force_mwait variable
The force_mwait variable iss defined either in
arch/x86/kernel/cpu/amd.c or in arch/x86/kernel/setup_64.c, but it is
only initialized and used in arch/x86/kernel/process.c. This patch
moves the declaration to arch/x86/kernel/process.c.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: michael@free-electrons.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 18:39:19 +02:00