Commit graph

131,063 commits

Author SHA1 Message Date
Paolo Abeni
941defcea7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.14-rc6).

Conflicts:

tools/testing/selftests/drivers/net/ping.py
  75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
  de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/

net/core/devmem.c
  a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
  1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/

Adjacent changes:

tools/testing/selftests/net/Makefile
  6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
  2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")

drivers/net/ethernet/broadcom/bnxt/bnxt.c
  661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
  fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 23:08:11 +01:00
Shradha Gupta
3e64bb2ae7 net: mana: cleanup mana struct after debugfs_remove()
When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(),
mana_gd_suspend() and mana_gd_resume() are called. If during this
mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs
pointer does not get reinitialized and ends up pointing to older,
cleaned-up dentry.
Further in the hibernation path, as part of power_down(), mana_gd_shutdown()
is triggered. This call, unaware of the failures in resume, tries to cleanup
the already cleaned up  mana_port_debugfs value and hits the following bug:

[  191.359296] mana 7870:00:00.0: Shutdown was called
[  191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098
[  191.360584] #PF: supervisor write access in kernel mode
[  191.361125] #PF: error_code(0x0002) - not-present page
[  191.361727] PGD 1080ea067 P4D 0
[  191.362172] Oops: Oops: 0002 [#1] SMP NOPTI
[  191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2
[  191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024
[  191.364124] RIP: 0010:down_write+0x19/0x50
[  191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d
[  191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246
[  191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000
[  191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098
[  191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001
[  191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000
[  191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020
[  191.369549] FS:  00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000
[  191.370213] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0
[  191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[  191.372906] Call Trace:
[  191.373262]  <TASK>
[  191.373621]  ? show_regs+0x64/0x70
[  191.374040]  ? __die+0x24/0x70
[  191.374468]  ? page_fault_oops+0x290/0x5b0
[  191.374875]  ? do_user_addr_fault+0x448/0x800
[  191.375357]  ? exc_page_fault+0x7a/0x160
[  191.375971]  ? asm_exc_page_fault+0x27/0x30
[  191.376416]  ? down_write+0x19/0x50
[  191.376832]  ? down_write+0x12/0x50
[  191.377232]  simple_recursive_removal+0x4a/0x2a0
[  191.377679]  ? __pfx_remove_one+0x10/0x10
[  191.378088]  debugfs_remove+0x44/0x70
[  191.378530]  mana_detach+0x17c/0x4f0
[  191.378950]  ? __flush_work+0x1e2/0x3b0
[  191.379362]  ? __cond_resched+0x1a/0x50
[  191.379787]  mana_remove+0xf2/0x1a0
[  191.380193]  mana_gd_shutdown+0x3b/0x70
[  191.380642]  pci_device_shutdown+0x3a/0x80
[  191.381063]  device_shutdown+0x13e/0x230
[  191.381480]  kernel_power_off+0x35/0x80
[  191.381890]  hibernate+0x3c6/0x470
[  191.382312]  state_store+0xcb/0xd0
[  191.382734]  kobj_attr_store+0x12/0x30
[  191.383211]  sysfs_kf_write+0x3e/0x50
[  191.383640]  kernfs_fop_write_iter+0x140/0x1d0
[  191.384106]  vfs_write+0x271/0x440
[  191.384521]  ksys_write+0x72/0xf0
[  191.384924]  __x64_sys_write+0x19/0x20
[  191.385313]  x64_sys_call+0x2b0/0x20b0
[  191.385736]  do_syscall_64+0x79/0x150
[  191.386146]  ? __mod_memcg_lruvec_state+0xe7/0x240
[  191.386676]  ? __lruvec_stat_mod_folio+0x79/0xb0
[  191.387124]  ? __pfx_lru_add+0x10/0x10
[  191.387515]  ? queued_spin_unlock+0x9/0x10
[  191.387937]  ? do_anonymous_page+0x33c/0xa00
[  191.388374]  ? __handle_mm_fault+0xcf3/0x1210
[  191.388805]  ? __count_memcg_events+0xbe/0x180
[  191.389235]  ? handle_mm_fault+0xae/0x300
[  191.389588]  ? do_user_addr_fault+0x559/0x800
[  191.390027]  ? irqentry_exit_to_user_mode+0x43/0x230
[  191.390525]  ? irqentry_exit+0x1d/0x30
[  191.390879]  ? exc_page_fault+0x86/0x160
[  191.391235]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  191.391745] RIP: 0033:0x7dbc4ff1c574
[  191.392111] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
[  191.393412] RSP: 002b:00007ffd95a23ab8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  191.393990] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007dbc4ff1c574
[  191.394594] RDX: 0000000000000005 RSI: 00005a6eeadb0ce0 RDI: 0000000000000001
[  191.395215] RBP: 00007ffd95a23ae0 R08: 00007dbc50003b20 R09: 0000000000000000
[  191.395805] R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000000005
[  191.396404] R13: 00005a6eeadb0ce0 R14: 00007dbc500045c0 R15: 00007dbc50001ee0
[  191.396987]  </TASK>

To fix this, we explicitly set such mana debugfs variables to NULL after
debugfs_remove() is called.

Fixes: 6607c17c6c ("net: mana: Enable debugfs files for MANA device")
Cc: stable@vger.kernel.org
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1741688260-28922-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:26:35 +01:00
Carolina Jubran
e92df790d0 net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
mlx5_eswitch_get_vepa returns -EPERM if the device lacks
eswitch_manager capability, blocking mlx5e_bridge_getlink from
retrieving VEPA mode. Since mlx5e_bridge_getlink implements
ndo_bridge_getlink, returning -EPERM causes bridge link show to fail
instead of skipping devices without this capability.

To avoid this, return -EOPNOTSUPP from mlx5e_bridge_getlink when
mlx5_eswitch_get_vepa fails, ensuring the command continues processing
other devices while ignoring those without the necessary capability.

Fixes: 4b89251de0 ("net/mlx5: Support ndo bridge_setlink and getlink")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:15 +01:00
Jianbo Liu
4b8eeed4fb net/mlx5: Bridge, fix the crash caused by LAG state check
When removing LAG device from bridge, NETDEV_CHANGEUPPER event is
triggered. Driver finds the lower devices (PFs) to flush all the
offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns
false if one of PF is unloaded. In such case,
mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of
the alive PF, and the flush is skipped.

Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge
event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be
ignored in this case because the upper interface for bond is deleted,
and the entry will never be aged because lastuse is never updated.

To make things worse, as the entry is alive, mlx5 bridge workqueue
keeps sending that event, which is then handled by kernel bridge
notifier. It causes the following crash when accessing the passed bond
netdev which is already destroyed.

To fix this issue, remove such checks. LAG state is already checked in
commit 15f8f16895 ("net/mlx5: Bridge, verify LAG state when adding
bond to bridge"), driver still need to skip offload if LAG becomes
invalid state after initialization.

 Oops: stack segment: 0000 [#1] SMP
 CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G           OE      6.11.0_mlnx #1
 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core]
 RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge]
 Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7
 RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297
 RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff
 RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0
 RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8
 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60
 R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __die_body+0x1a/0x60
  ? die+0x38/0x60
  ? do_trap+0x10b/0x120
  ? do_error_trap+0x64/0xa0
  ? exc_stack_segment+0x33/0x50
  ? asm_exc_stack_segment+0x22/0x30
  ? br_switchdev_event+0x2c/0x110 [bridge]
  ? sched_balance_newidle.isra.149+0x248/0x390
  notifier_call_chain+0x4b/0xa0
  atomic_notifier_call_chain+0x16/0x20
  mlx5_esw_bridge_update+0xec/0x170 [mlx5_core]
  mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core]
  process_scheduled_works+0x81/0x390
  worker_thread+0x106/0x250
  ? bh_worker+0x110/0x110
  kthread+0xb7/0xe0
  ? kthread_park+0x80/0x80
  ret_from_fork+0x2d/0x50
  ? kthread_park+0x80/0x80
  ret_from_fork_asm+0x11/0x20
  </TASK>

Fixes: ff9b752146 ("net/mlx5: Bridge, support LAG")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Shay Drory
32966984be net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch
Currently, MultiPort E-Switch is requesting to create a LAG with shared
FDB without checking the LAG is supporting shared FDB.
Add the check.

Fixes: a32327a3a0 ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Shay Drory
32d2724db5 net/mlx5: Fix incorrect IRQ pool usage when releasing IRQs
mlx5_irq_pool_get() is a getter for completion IRQ pool only.
However, after the cited commit, mlx5_irq_pool_get() is called during
ctrl IRQ release flow to retrieve the pool, resulting in the use of an
incorrect IRQ pool.

Hence, use the newly introduced mlx5_irq_get_pool() getter to retrieve
the correct IRQ pool based on the IRQ itself. While at it, rename
mlx5_irq_pool_get() to mlx5_irq_table_get_comp_irq_pool() which
accurately reflects its purpose and improves code readability.

Fixes: 0477d5168b ("net/mlx5: Expose SFs IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Vlad Dogaru
521992337f net/mlx5: HWS, Rightsize bwc matcher priority
The bwc layer was clamping the matcher priority from 32 bits to 16 bits.
This didn't show up until a matcher was resized, since the initial
native matcher was created using the correct 32 bit value.

The fix also reorders fields to avoid some padding.

Fixes: 2111bb970c ("net/mlx5: HWS, added backward-compatible API handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741644104-97767-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Yevgeny Kliteynik
03ebae1992 net/mlx5: DR, use the right action structs for STEv3
Some actions in ConnectX-8 (STEv3) have different structure,
and they are handled separately in ste_ctx_v3.
This separate handling was missing two actions: INSERT_HDR
and REMOVE_HDR, which broke SWS for Linux Bridge.
This patch resolves the issue by introducing dedicated
callbacks for the insert and remove header functions,
with version-specific implementations for each STE variant.

Fixes: 4d617b5757 ("net/mlx5: DR, add support for ConnectX-8 steering")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741644104-97767-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Paolo Abeni
89d75c4c67 Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:

====================
mlx5-next updates 2025-03-10

The following pull-request contains common mlx5 updates for your *net-next* tree.
Please pull and let me know of any problem.

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Add IFC bits for PPCNT recovery counters group
  net/mlx5: fs, add RDMA TRANSPORT steering domain support
  net/mlx5: Query ADV_RDMA capabilities
  net/mlx5: Limit non-privileged commands
  net/mlx5: Allow the throttle mechanism to be more dynamic
  net/mlx5: Add RDMA_CTRL HW capabilities
====================

Link: https://patch.msgid.link/1741608293-41436-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 12:40:46 +01:00
Jonas Karlman
41f35564cb net: stmmac: dwmac-rk: Remove unneeded GRF and peripheral GRF checks
Now that GRF, and peripheral GRF where needed, is validated at probe
time there is no longer any need to check and log an error in each SoC
specific operation.

Remove unneeded IS_ERR() checks and early bail out from each SoC
specific operation.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250308213720.2517944-4-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 10:45:19 +01:00
Jonas Karlman
247e84f66a net: stmmac: dwmac-rk: Validate GRF and peripheral GRF during probe
All Rockchip GMAC variants typically write to GRF regs to control e.g.
interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3576 and
RK3588 use a mix of GRF and peripheral GRF regs. These syscon regmaps is
located with help of a rockchip,grf and rockchip,php-grf phandle.

However, validating the rockchip,grf and rockchip,php-grf syscon regmap
is deferred until e.g. interface mode or speed is configured, inside the
individual SoC specific operations.

Change to validate the rockchip,grf and rockchip,php-grf syscon regmap
at probe time to simplify all SoC specific operations.

This should not introduce any backward compatibility issues as all
GMAC nodes have been added together with a rockchip,grf phandle (and
rockchip,php-grf where required) in their initial commit.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250308213720.2517944-3-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 10:45:19 +01:00
Janik Haag
676cc91e1f net: cn23xx: fix typos
This patch fixes a few typos, spelling mistakes, and a bit of grammar,
increasing the comments readability.

Signed-off-by: Janik Haag <janik@aq0.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250307145648.1679912-2-janik@aq0.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 09:58:42 +01:00
Jian Shen
9e32850405 net: hns3: use string choices helper
Use string choices helper for better readability.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250307113733.819448-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 09:40:54 +01:00
Jakub Kicinski
e016cf5f39 netdevsim: 'support' multi-buf XDP
Don't error out on large MTU if XDP is multi-buf.
The ping test now tests ping with XDP and high MTU.
netdevsim doesn't actually run the prog (yet?) so
it doesn't matter if the prog was multi-buf..

Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250311092820.542148-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:39:59 -07:00
Stanislav Fomichev
1d22d3060b net: drop rtnl_lock for queue_mgmt operations
All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.

Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry. <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:32:35 -07:00
Simon Horman
17fef20423 net/mlx5: Avoid unnecessary use of comma operator
Although it does not seem to have any untoward side-effects,
the use of ';' to separate to assignments seems more appropriate than ','.

Flagged by clang-19 -Wcomma

No functional change intended.
Compile tested only.

Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250307-mlx5-comma-v1-1-934deb6927bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:22:48 -07:00
Stanislav Fomichev
adbf627f17 eth: bnxt: add missing netdev lock management to bnxt_dl_reload_up
bnxt_dl_reload_up is completely missing instance lock management
which can result in `devlink dev reload` leaving with instance
lock held. Add the missing calls.

Also add netdev_assert_locked to make it clear that the up() method
is running with the instance lock grabbed.

v2:
- add net/netdev_lock.h include to bnxt_devlink.c for netdev_assert_locked

Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:19:15 -07:00
Stanislav Fomichev
eaca6e5dc6 eth: bnxt: request unconditional ops lock
netdev_lock_ops conditionally grabs instance lock when queue_mgmt_ops
is defined. However queue_mgmt_ops support is signaled via FW
so we can sometimes boot without queue_mgmt_ops being set.
This will result in bnxt running without instance lock which
the driver now heavily depends on. Set request_ops_lock to true
unconditionally to always request netdev instance lock.

Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:19:15 -07:00
Stanislav Fomichev
110eff172d eth: bnxt: switch to netif_close
All (error) paths that call dev_close are already holding instance lock,
so switch to netif_close to avoid the deadlock.

v2:
- add missing EXPORT_MODULE for netif_close

Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:19:15 -07:00
David S. Miller
081b575617 Few more fixes:
- cfg80211/mac80211
    - stop possible runaway wiphy worker
    - EHT should not use reserved MPDU size bits
    - don't run worker for stopped interfaces
    - fix SA Query processing with MLO
    - fix lookup of assoc link BSS entries
    - correct station flush on unauthorize
  - iwlwifi:
    - TSO fixes
    - fix non-MSI-X platforms
    - stop possible runaway restart worker
  - rejigger maintainers so I'm not CC'ed on
    everything
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmfRSMgACgkQ10qiO8sP
 aACdkw//YrPrch8eZY9YztRekiX6Ad8tuQLciJxEJh4VHMfJd7hk78QB43m1Kf75
 FITeMktCD7hjI39vGaWxJSe/eZOj4pf6BSHF2wMX1NbXpEL+drlgL5Z8+NN1Ps3l
 qy5z3JIb3EVh4Y4C2xJqP/RbZD4vXU1XoETeJQJeUI8DZgrhtTWrfrrp8PCBRFzB
 lM991wplOHyMb05M71njCDwnMqcwZ4A+QyXp2rb8oZuCM59OOM0/kkNTRd+YCJNg
 uBlAZuLIU+bipA4Fcq3h17S4CulJDzNjKSfhmDLk9gvO/JgTgYFWruXG8svACMWO
 g2frQElM1IHAYVypbQt85PtRvzENU9lcwtR8k2Nijk+wvd3BiZuGRIdhn53FVN1z
 mTpNFP/UjBBPyBI7CHQOWw2jJO44/AraENWema4JwQbTqgdhN7Tf79OeTPUsgXz9
 0D+PIf57P+uH61AYT9znN1A9t6YSdLh0a7LXGYP3E9dpkwENer5JGbqubWXKkme7
 mjQpJsiuJYUEmR8dFDq/6H4UxnYDeA/bSf9xLatmgJoU47lDg+T7eefVULTLGla9
 bVN68LxHIcegelwMw45GfGx3pRoRk0qw6/2d1ELfrAw81FrhZ2/kjOeoDWlnJtIy
 GZkRTTOBq6nLL4LGGqUXP80q8uillDtJhbddljA/pkupPn69EEk=
 =ENOH
 -----END PGP SIGNATURE-----

Merge tag 'wireless-2025-03-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

Johannes berg says:

====================
Few more fixes:
 - cfg80211/mac80211
   - stop possible runaway wiphy worker
   - EHT should not use reserved MPDU size bits
   - don't run worker for stopped interfaces
   - fix SA Query processing with MLO
   - fix lookup of assoc link BSS entries
   - correct station flush on unauthorize
 - iwlwifi:
   - TSO fixes
   - fix non-MSI-X platforms
   - stop possible runaway restart worker
 - rejigger maintainers so I'm not CC'ed on
   everything
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-12 13:56:58 +00:00
Haoxiang Li
d2b9d97e89 qlcnic: fix memory leak issues in qlcnic_sriov_common.c
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if
any sriov_vlans fails to be allocated.
Add qlcnic_sriov_free_vlans() to free the memory allocated by
qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to
be allocated.

Fixes: 91b7282b61 ("qlcnic: Support VLAN id config.")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 15:23:28 +01:00
Justin Lai
415f135ace rtase: Fix improper release of ring list entries in rtase_sw_reset
Since rtase_init_ring, which is called within rtase_sw_reset, adds ring
entries already present in the ring list back into the list, it causes
the ring list to form a cycle. This results in list_for_each_entry_safe
failing to find an endpoint during traversal, leading to an error.
Therefore, it is necessary to remove the previously added ring_list nodes
before calling rtase_init_ring.

Fixes: 0796004899 ("rtase: Implement net_device_ops")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306070510.18129-1-justinlai0215@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 13:25:49 +01:00
Hangbin Liu
0c5e145a35 bonding: fix incorrect MAC address setting to receive NS messages
When validation on the backup slave is enabled, we need to validate the
Neighbor Solicitation (NS) messages received on the backup slave. To
receive these messages, the correct destination MAC address must be added
to the slave. However, the target in bonding is a unicast address, which
we cannot use directly. Instead, we should first convert it to a
Solicited-Node Multicast Address and then derive the corresponding MAC
address.

Fix the incorrect MAC address setting on both slave_set_ns_maddr() and
slave_set_ns_maddrs(). Since the two function names are similar. Add
some description for the functions. Also only use one mac_addr variable
in slave_set_ns_maddr() to save some code and logic.

Fixes: 8eb36164d1 ("bonding: add ns target multicast address to slave device")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 13:19:27 +01:00
Roger Quadros
62aa3246f4 net: ti: icssg-prueth: Add XDP support
Add native XDP support. We do not support zero copy yet.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 11:09:56 +01:00
Roger Quadros
73f7f13118 net: ti: icssg-prueth: introduce and use prueth_swdata struct for SWDATA
We have different cases for SWDATA (skb, page, cmd, etc)
so it is better to have a dedicated data structure for that.
We can embed the type field inside the struct and use it
to interpret the data in completion handlers.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 11:09:56 +01:00
Roger Quadros
46eeb90f03 net: ti: icssg-prueth: Use page_pool API for RX buffer allocation
This is to prepare for native XDP support.

The page pool API is more faster in allocating pages than
__alloc_skb(). Drawback is that it works at PAGE_SIZE granularity
so we are not efficient in memory usage.
i.e. we are using PAGE_SIZE (4KB) memory for 1.5KB max packet size.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 11:09:55 +01:00
Satish Kharat
df9fd2a3ce enic: get max rq & wq entries supported by hw, 16K queues
Enables reading the max rq and wq entries supported from the hw.
Enables 16k rq and wq entries on hw that supports.

Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-8-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 10:21:38 +01:00
Satish Kharat
26b2c5f6ff enic: cleanup of enic wq request completion path
Cleans up the enic wq request completion path needed for 16k wq size
support.

Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-7-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 10:21:34 +01:00
Satish Kharat
e5f1bcd93d enic: added enic_wq.c and enic_wq.h
Moves wq related function to enic_wq.c. Prepares for
a cleaup of enic wq code path.

Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-6-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 10:21:32 +01:00
Satish Kharat
6dca618c94 enic: remove unused function cq_enet_wq_desc_dec
Removes cq_enet_wq_desc_dec, not needed anymore.

Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-5-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 10:21:27 +01:00
Satish Kharat
bcb725c79c enic: enable rq extended cq support
Enables getting from hw all the supported rq cq sizes and
uses the highest supported cq size.

Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-4-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 10:21:15 +01:00
Satish Kharat
2be2eb7643 enic: enic rq extended cq defines
Adds the defines for 32 and 64 byte receive queue completion queue
descriptors.
Adds devcmd define to get rq cq descriptor size/s supported by hw.

Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-3-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 10:21:15 +01:00
Satish Kharat
eaa23db868 enic: enic rq code reorg
Separates enic rx path from generic vnic api. Removes some
complexity of doign enic callbacks through vnic api in rx.
This is in preparation for enabling enic extended cq which
applies only to enic rx path.

Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-2-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 10:21:15 +01:00
Satish Kharat
025cf93180 enic: Move function from header file to c file
Moves cq_enet_rq_desc_dec from cq_enet_desc.h to enic_rq.c.
This is in preparation for enic extended completion queue
enabling.

Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-1-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 10:21:15 +01:00
Taehee Yoo
87dd285083 eth: bnxt: fix memory leak in queue reset
When the queue is reset, the bnxt_alloc_one_tpa_info() is called to
allocate tpa_info for the new queue.
And then the old queue's tpa_info should be removed by the
bnxt_free_one_tpa_info(), but it is not called.
So memory leak occurs.
It adds the bnxt_free_one_tpa_info() in the bnxt_queue_mem_free().

unreferenced object 0xffff888293cc0000 (size 16384):
  comm "ncdevmem", pid 2076, jiffies 4296604081
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 40 75 78 93 82 88 ff ff  ........@ux.....
    40 75 78 93 02 00 00 00 00 00 00 00 00 00 00 00  @ux.............
  backtrace (crc 5d7d4798):
    ___kmalloc_large_node+0x10d/0x1b0
    __kmalloc_large_node_noprof+0x17/0x60
    __kmalloc_noprof+0x3f6/0x520
    bnxt_alloc_one_tpa_info+0x5f/0x300 [bnxt_en]
    bnxt_queue_mem_alloc+0x8e8/0x14f0 [bnxt_en]
    netdev_rx_queue_restart+0x233/0x620
    net_devmem_bind_dmabuf_to_queue+0x2a3/0x600
    netdev_nl_bind_rx_doit+0xc00/0x10a0
    genl_family_rcv_msg_doit+0x1d4/0x2b0
    genl_rcv_msg+0x3fb/0x6c0
    netlink_rcv_skb+0x12c/0x360
    genl_rcv+0x24/0x40
    netlink_unicast+0x447/0x710
    netlink_sendmsg+0x712/0xbc0
    __sys_sendto+0x3fd/0x4d0
    __x64_sys_sendto+0xdc/0x1b0

Fixes: 2d694c27d3 ("bnxt_en: implement netdev_queue_mgmt_ops")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250309134219.91670-7-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:31:11 -07:00
Taehee Yoo
f09af5fdfb eth: bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
When qstats-get operation is executed, callbacks of netdev_stats_ops
are called. The bnxt_get_queue_stats{rx | tx} collect per-queue stats
from sw_stats in the rings.
But {rx | tx | cp}_ring are allocated when the interface is up.
So, these rings are not allocated when the interface is down.

The qstats-get is allowed even if the interface is down. However,
the bnxt_get_queue_stats{rx | tx}() accesses cp_ring and tx_ring
without null check.
So, it needs to avoid accessing rings if the interface is down.

Reproducer:
 ip link set $interface down
 ./cli.py --spec netdev.yaml --dump qstats-get
OR
 ip link set $interface down
 python ./stats.py

Splat looks like:
 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 1680fa067 P4D 1680fa067 PUD 16be3b067 PMD 0
 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 0 UID: 0 PID: 1495 Comm: python3 Not tainted 6.14.0-rc4+ #32 5cd0f999d5a15c574ac72b3e4b907341
 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
 RIP: 0010:bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en]
 Code: c6 87 b5 18 00 00 02 eb a2 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 01
 RSP: 0018:ffffabef43cdb7e0 EFLAGS: 00010282
 RAX: 0000000000000000 RBX: ffffffffc04c8710 RCX: 0000000000000000
 RDX: ffffabef43cdb858 RSI: 0000000000000000 RDI: ffff8d504e850000
 RBP: ffff8d506c9f9c00 R08: 0000000000000004 R09: ffff8d506bcd901c
 R10: 0000000000000015 R11: ffff8d506bcd9000 R12: 0000000000000000
 R13: ffffabef43cdb8c0 R14: ffff8d504e850000 R15: 0000000000000000
 FS:  00007f2c5462b080(0000) GS:ffff8d575f600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000167fd0000 CR4: 00000000007506f0
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __die+0x20/0x70
  ? page_fault_oops+0x15a/0x460
  ? sched_balance_find_src_group+0x58d/0xd10
  ? exc_page_fault+0x6e/0x180
  ? asm_exc_page_fault+0x22/0x30
  ? bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en cdd546fd48563c280cfd30e9647efa420db07bf1]
  netdev_nl_stats_by_netdev+0x2b1/0x4e0
  ? xas_load+0x9/0xb0
  ? xas_find+0x183/0x1d0
  ? xa_find+0x8b/0xe0
  netdev_nl_qstats_get_dumpit+0xbf/0x1e0
  genl_dumpit+0x31/0x90
  netlink_dump+0x1a8/0x360

Fixes: af7b3b4add ("eth: bnxt: support per-queue statistics")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250309134219.91670-6-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:31:11 -07:00
Taehee Yoo
c03e7d05aa eth: bnxt: do not update checksum in bnxt_xdp_build_skb()
The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload
is enabled.
When the XDP-MB program is attached and it returns XDP_PASS, the
bnxt_xdp_build_skb() is called to update skb_shared_info.
The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info,
but it updates ip_summed value too if checksum offload is enabled.
This is actually duplicate work.

When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed
is CHECKSUM_NONE or not.
It means that ip_summed should be CHECKSUM_NONE at this moment.
But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the
XDP-MB-PASS path.
So the by skb_checksum_none_assert() WARNS about it.

This is duplicate work and updating ip_summed in the
bnxt_xdp_build_skb() is not needed.

Splat looks like:
WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en]
Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_]
CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G        W          6.14.0-rc4+ #27
Tainted: [W]=WARN
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en]
Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f
RSP: 0018:ffff88881ba09928 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000
RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8
RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070
R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080
R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000
FS:  00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
 <IRQ>
 ? __warn+0xcd/0x2f0
 ? bnxt_rx_pkt+0x479b/0x7610
 ? report_bug+0x326/0x3c0
 ? handle_bug+0x53/0xa0
 ? exc_invalid_op+0x14/0x50
 ? asm_exc_invalid_op+0x16/0x20
 ? bnxt_rx_pkt+0x479b/0x7610
 ? bnxt_rx_pkt+0x3e41/0x7610
 ? __pfx_bnxt_rx_pkt+0x10/0x10
 ? napi_complete_done+0x2cf/0x7d0
 __bnxt_poll_work+0x4e8/0x1220
 ? __pfx___bnxt_poll_work+0x10/0x10
 ? __pfx_mark_lock.part.0+0x10/0x10
 bnxt_poll_p5+0x36a/0xfa0
 ? __pfx_bnxt_poll_p5+0x10/0x10
 __napi_poll.constprop.0+0xa0/0x440
 net_rx_action+0x899/0xd00
...

Following ping.py patch adds xdp-mb-pass case. so ping.py is going
to be able to reproduce this issue.

Fixes: 1dc4c557bf ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250309134219.91670-5-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:31:11 -07:00
Taehee Yoo
661958552e eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic
When a queue is restarted, it sets MRU to 0 for stopping packet flow.
MRU variable is a member of vnic_info[], the first vnic_info is default
and the second is ntuple.
Only when ntuple is enabled(ethtool -K eth0 ntuple on), vnic_info for
ntuple is allocated in init logic.
The bp->nr_vnics indicates how many vnic_info are allocated.
However bnxt_queue_{start | stop}() accesses vnic_info[BNXT_VNIC_NTUPLE]
regardless of ntuple state.

Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fixes: b9d2956e86 ("bnxt_en: stop packet flow during bnxt_queue_stop/start")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250309134219.91670-4-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:31:11 -07:00
Taehee Yoo
ca2456e073 eth: bnxt: return fail if interface is down in bnxt_queue_mem_alloc()
The bnxt_queue_mem_alloc() is called to allocate new queue memory when
a queue is restarted.
It internally accesses rx buffer descriptor corresponding to the index.
The rx buffer descriptor is allocated and set when the interface is up
and it's freed when the interface is down.
So, if queue is restarted if interface is down, kernel panic occurs.

Splat looks like:
 BUG: unable to handle page fault for address: 000000000000b240
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 3 UID: 0 PID: 1563 Comm: ncdevmem2 Not tainted 6.14.0-rc2+ #9 844ddba6e7c459cafd0bf4db9a3198e
 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
 RIP: 0010:bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en]
 Code: 41 54 4d 89 c4 4d 69 c0 c0 05 00 00 55 48 89 f5 53 48 89 fb 4c 8d b5 40 05 00 00 48 83 ec 15
 RSP: 0018:ffff9dcc83fef9e8 EFLAGS: 00010202
 RAX: ffffffffc0457720 RBX: ffff934ed8d40000 RCX: 0000000000000000
 RDX: 000000000000001f RSI: ffff934ea508f800 RDI: ffff934ea508f808
 RBP: ffff934ea508f800 R08: 000000000000b240 R09: ffff934e84f4b000
 R10: ffff9dcc83fefa30 R11: ffff934e84f4b000 R12: 000000000000001f
 R13: ffff934ed8d40ac0 R14: ffff934ea508fd40 R15: ffff934e84f4b000
 FS:  00007fa73888c740(0000) GS:ffff93559f780000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000b240 CR3: 0000000145a2e000 CR4: 00000000007506f0
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __die+0x20/0x70
  ? page_fault_oops+0x15a/0x460
  ? exc_page_fault+0x6e/0x180
  ? asm_exc_page_fault+0x22/0x30
  ? __pfx_bnxt_queue_mem_alloc+0x10/0x10 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7]
  ? bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7]
  netdev_rx_queue_restart+0xc5/0x240
  net_devmem_bind_dmabuf_to_queue+0xf8/0x200
  netdev_nl_bind_rx_doit+0x3a7/0x450
  genl_family_rcv_msg_doit+0xd9/0x130
  genl_rcv_msg+0x184/0x2b0
  ? __pfx_netdev_nl_bind_rx_doit+0x10/0x10
  ? __pfx_genl_rcv_msg+0x10/0x10
  netlink_rcv_skb+0x54/0x100
  genl_rcv+0x24/0x40
...

Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 2d694c27d3 ("bnxt_en: implement netdev_queue_mgmt_ops")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250309134219.91670-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:31:11 -07:00
Taehee Yoo
9f7b2aa503 eth: bnxt: fix truesize for mb-xdp-pass case
When mb-xdp is set and return is XDP_PASS, packet is converted from
xdp_buff to sk_buff with xdp_update_skb_shared_info() in
bnxt_xdp_build_skb().
bnxt_xdp_build_skb() passes incorrect truesize argument to
xdp_update_skb_shared_info().
The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but
the skb_shared_info was wiped by napi_build_skb() before.
So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it
instead of getting skb_shared_info from xdp_get_shared_info_from_buff().

Splat looks like:
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590
 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms
 CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3
 RIP: 0010:skb_try_coalesce+0x504/0x590
 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99
 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287
 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0
 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003
 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900
 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740
 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002
 FS:  0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0
 PKRU: 55555554
 Call Trace:
  <IRQ>
  ? __warn+0x84/0x130
  ? skb_try_coalesce+0x504/0x590
  ? report_bug+0x18a/0x1a0
  ? handle_bug+0x53/0x90
  ? exc_invalid_op+0x14/0x70
  ? asm_exc_invalid_op+0x16/0x20
  ? skb_try_coalesce+0x504/0x590
  inet_frag_reasm_finish+0x11f/0x2e0
  ip_defrag+0x37a/0x900
  ip_local_deliver+0x51/0x120
  ip_sublist_rcv_finish+0x64/0x70
  ip_sublist_rcv+0x179/0x210
  ip_list_rcv+0xf9/0x130

How to reproduce:
<Node A>
ip link set $interface1 xdp obj xdp_pass.o
ip link set $interface1 mtu 9000 up
ip a a 10.0.0.1/24 dev $interface1
<Node B>
ip link set $interfac2 mtu 9000 up
ip a a 10.0.0.2/24 dev $interface2
ping 10.0.0.1 -s 65000

Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be
able to reproduce this issue.

Fixes: 1dc4c557bf ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250309134219.91670-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:31:11 -07:00
Oleksij Rempel
cfa693bf9d net: usb: lan78xx: Sanitize return values of register read/write functions
usb_control_msg() returns the number of transferred bytes or a negative
error code. The current implementation propagates the transferred byte
count, which is unintended. This affects code paths that assume a
boolean success/failure check, such as the EEPROM detection logic.

Fix this by ensuring lan78xx_read_reg() and lan78xx_write_reg() return
only 0 on success and preserve negative error codes.

This approach is consistent with existing usage, as the transferred byte
count is not explicitly checked elsewhere.

Fixes: 8b1b2ca83b ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ac965de8-f320-430f-80f6-b16f4e1ba06d@sirena.org.uk
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250307101223.3025632-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:18:44 -07:00
Dan Carpenter
991a1b0992 eth: fbnic: fix memory corruption in fbnic_tlv_attr_get_string()
This code is trying to ensure that the last byte of the buffer is a NUL
terminator.  However, the problem is that attr->value[] is an array of
__le32, not char, so it zeroes out 4 bytes way beyond the end of the
buffer.  Cast the buffer to char to address this.

Fixes: e5cf5107c9 ("eth: fbnic: Update fbnic_tlv_attr_get_string() to work like nla_strscpy()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lee Trager <lee@trager.us>
Link: https://patch.msgid.link/2791d4be-ade4-4e50-9b12-33307d8410f6@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:17:33 -07:00
Heiner Kallweit
473367a5ff r8169: increase max jumbo packet size on RTL8125/RTL8126
Realtek confirmed that all RTL8125/RTL8126 chip versions support up to
16K jumbo packets. Reflect this in the driver.

Tested by Rui on RTL8125B with 12K jumbo packets.

Suggested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/396762ad-cc65-4e60-b01e-8847db89e98b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:13:30 -07:00
Joe Damato
d5d715207e virtio_net: Use persistent NAPI config
Use persistent NAPI config so that NAPI IDs are not renumbered as queue
counts change.

$ sudo ethtool -l ens4  | tail -5 | egrep -i '(current|combined)'
Current hardware settings:
Combined:       4

$ ./tools/net/ynl/pyynl/cli.py \
    --spec Documentation/netlink/specs/netdev.yaml \
    --dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
 {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
 {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
 {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
 {'id': 0, 'ifindex': 2, 'type': 'tx'},
 {'id': 1, 'ifindex': 2, 'type': 'tx'},
 {'id': 2, 'ifindex': 2, 'type': 'tx'},
 {'id': 3, 'ifindex': 2, 'type': 'tx'}]

Now adjust the queue count, note that the NAPI IDs are not renumbered:

$ sudo ethtool -L ens4 combined 1
$ ./tools/net/ynl/pyynl/cli.py \
    --spec Documentation/netlink/specs/netdev.yaml \
    --dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
 {'id': 0, 'ifindex': 2, 'type': 'tx'}]

$ sudo ethtool -L ens4 combined 8
$ ./tools/net/ynl/pyynl/cli.py \
    --spec Documentation/netlink/specs/netdev.yaml \
    --dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
 {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
 {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
 {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
 {'id': 4, 'ifindex': 2, 'napi-id': 8197, 'type': 'rx'},
 {'id': 5, 'ifindex': 2, 'napi-id': 8198, 'type': 'rx'},
 {'id': 6, 'ifindex': 2, 'napi-id': 8199, 'type': 'rx'},
 {'id': 7, 'ifindex': 2, 'napi-id': 8200, 'type': 'rx'},
 [...]

Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250307011215.266806-5-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:09:22 -07:00
Joe Damato
e7231f49d5 virtio-net: Map NAPIs to queues
Use netif_queue_set_napi to map NAPIs to queue IDs so that the mapping
can be accessed by user apps. Note that the netif_queue_set_napi
currently requires RTNL, so care must be taken to ensure RTNL is held on
paths where this API might be reached.

The paths in the driver where this API can be reached appear to be:

  - ndo_open, ndo_close, which hold RTNL so no driver change is needed.
  - rx_pause, rx_resume, tx_pause, tx_resume are reached either via
    an ethtool ioctl or via XSK - neither path requires a driver change.
  - power management paths (which call open and close), which have been
    updated to hold/release RTNL.

$ ethtool -i ens4 | grep driver
driver: virtio_net

$ sudo ethtool -L ens4 combined 4

$ ./tools/net/ynl/pyynl/cli.py \
       --spec Documentation/netlink/specs/netdev.yaml \
       --dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8289, 'type': 'rx'},
 {'id': 1, 'ifindex': 2, 'napi-id': 8290, 'type': 'rx'},
 {'id': 2, 'ifindex': 2, 'napi-id': 8291, 'type': 'rx'},
 {'id': 3, 'ifindex': 2, 'napi-id': 8292, 'type': 'rx'},
 {'id': 0, 'ifindex': 2, 'type': 'tx'},
 {'id': 1, 'ifindex': 2, 'type': 'tx'},
 {'id': 2, 'ifindex': 2, 'type': 'tx'},
 {'id': 3, 'ifindex': 2, 'type': 'tx'}]

Note that virtio_net has TX-only NAPIs which do not have NAPI IDs, so
the lack of 'napi-id' in the above output is expected.

Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250307011215.266806-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:09:21 -07:00
Joe Damato
986a930451 virtio-net: Refactor napi_disable paths
Create virtnet_napi_disable helper and refactor virtnet_napi_tx_disable
to take a struct send_queue.

Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250307011215.266806-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:09:21 -07:00
Joe Damato
2af5adf962 virtio-net: Refactor napi_enable paths
Refactor virtnet_napi_enable and virtnet_napi_tx_enable to take a struct
receive_queue. Create a helper, virtnet_napi_do_enable, which contains
the logic to enable a NAPI.

Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250307011215.266806-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:09:21 -07:00
Wentao Liang
eab0396353 net/mlx5: handle errors in mlx5_chains_create_table()
In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns()
and mlx5_get_flow_namespace() must be checked to prevent NULL pointer
dereferences. If either function fails, the function should log error
message with mlx5_core_warn() and return error pointer.

Fixes: 39ac237ce0 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250307021820.2646-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10 13:03:03 -07:00
Patrisious Haddad
15b103df80 net/mlx5: fs, add RDMA TRANSPORT steering domain support
Add RX and TX RDMA_TRANSPORT flow table namespace, and the ability
to create flow tables in those namespaces.

The RDMA_TRANSPORT RX and TX are per vport.

Packets will traverse through RDMA_TRANSPORT_RX after RDMA_RX and through
RDMA_TRANSPORT_TX before RDMA_TX, ensuring proper control and management.

RDMA_TRANSPORT domains are managed by the vport group manager.

Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/a6b550d9859a197eafa804b9a8d76916ca481da9.1740574103.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-08 13:22:49 -05:00
Patrisious Haddad
ab7d228c7e net/mlx5: Query ADV_RDMA capabilities
Query ADV_RDMA capabilities which provide information for
advanced RDMA related features.

Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/e3e6ede03ea31cd201078dcdd4e407608e4a5a87.1740574103.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-08 13:22:46 -05:00