Commit graph

287,753 commits

Author SHA1 Message Date
Andi Kleen
4e8858d513 watchdog: Initconst section fixes for watchdog
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20 14:32:00 +02:00
John Crispin
9cfce47b14 watchdog: lantiq: fix watchdogs timeout handling
The enable function was using the global timeout variable for local operations.
This resulted in the value of the global variable being corrupted, thus
breaking the code.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-mips@linux-mips.org
2011-09-20 14:28:24 +02:00
Naga Chumbalkar
dbc018eca3 watchdog: hpwdt: prevent multiple "NMI occurred" messages
On platforms with no iCRU support don't print two, (possibly conflicting),
"NMI occurred" messages when the firmware is unable to source the NMI.

Please note that one of the enhancements to the v1.3.0 hpwdt driver is to panic and allow
KDUMP to succeed even on NMIs that are unknown to the platform firmware.

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Reviewed-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20 14:24:54 +02:00
H Hartley Sweeten
cb7efc02c6 watchdog: WatchDog Timer Driver Core - use passed watchdog_device
Use the passed watchdog_device instead of the static global variable when
testing and setting the status in watchdog_ping, watchdog_start, and
watchdog_stop.  Note that the callers of these functions are actually
passing the static global variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20 14:22:28 +02:00
Mark Brown
523d9cfbb2 mfd: Support software initiated shutdown of WM831x PMICs
In systems where there is no hardware signal from the processor to the
PMIC to initiate the final power off sequence we must initiate the
shutdown with a register write to the PMIC. Support such systems in the
driver. Since this may prevent a full shutdown of the system platform
data is used to enable the feature.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-09-20 13:02:09 +01:00
Mark Brown
f648de832d Merge branch 'for-3.1' into for-3.2 2011-09-20 12:59:35 +01:00
Lars-Peter Clausen
26806a4266 ASoC: ssm2602: Do not dereference codec->control_data
The driver assumes that control_data points to the drivers i2c_client struct,
but this is no longer the case since the ASoC core has switched to regmap.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20 12:59:07 +01:00
Axel Lin
d890a1a42d ASoC: fsl: Fix error handling if platform_device_add fails
Call platform_device_put() instead of platform_device_unregister() if
platform_device_add() fails.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20 12:58:59 +01:00
Mark Brown
f93dc4b6c9 ASoC: Remove bitrotted wm8962_resume()
This functionality is now subsumed within the bias management, using the
standard cache management functionality, without assuming the cache type.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-20 12:57:48 +01:00
Mark Brown
ded71dcb77 ASoC: Refcount WM8996 bandgap from FLL too
For digital only paths we need to make sure the bandgap is enabled prior
to starting the FLL which isn't tied into DAPM.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-20 12:56:53 +01:00
Mark Brown
c9d023adb6 ASoC: Fix unused variable warning in WM8996
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-20 12:56:36 +01:00
Rob Herring
eef24afb28 irq: Fix check for already initialized irq_domain in irq_domain_add
The sanity check in irq_domain_add() tests desc->irq_data != NULL or
irq_data->domain != NULL. This prevents adding an irq_domain to a irq
descriptor when irq_data exists, which true when the irq descriptor
exists.

This went unnoticed so far as the simple domain code did not enter
this code path because domain->nr_irqs is always 0 for the simple domains.

Split the check for irq_data == NULL out and have a separate warning
for it.

[ tglx: Made the check for irq_data == NULL separate ]

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: marc.zyngier@arm.com
Cc: thomas.abraham@linaro.org
Cc: jamie@jamieiles.com
Cc: b-cousson@ti.com
Cc: shawn.guo@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree-discuss@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1316017900-19918-3-git-send-email-robherring2@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-20 12:16:22 +02:00
Rob Herring
5bd078dda4 irq: Add declaration of irq_domain_simple_ops to irqdomain.h
irq_domain_simple_ops is exported, but is not declared in irqdomain.h,
so add it.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: marc.zyngier@arm.com
Cc: thomas.abraham@linaro.org
Cc: jamie@jamieiles.com
Cc: b-cousson@ti.com
Cc: shawn.guo@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree-discuss@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1316017900-19918-2-git-send-email-robherring2@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-20 12:16:22 +02:00
Dave Airlie
88ef4e3f4f Merge branch 'drm-intel-next' of git://people.freedesktop.org/~keithp/linux into drm-next
* 'drm-intel-next' of git://people.freedesktop.org/~keithp/linux:
  Drivers: i915: Fix all space related issues.
2011-09-20 09:36:22 +01:00
Dave Airlie
b2d108ba33 Merge branch 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-next
* 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6: (353 commits)
  drm/nouveau: remove allocations from gart populate() hook
  drm/nvc0/fb: slightly improve PMFB intr handling, move out of nvc0_graph.c
  drm/nvc0/fifo: avoid touching missing subfifos
  drm/nvd9/disp: bail out of mode_set_base if no fb bound to crtc
  drm/nvd9/disp: stub some more api hooks so we don't oops on resume
  drm/nouveau: fix printk typo in ioremap failure path
  drm/nvc0/pm: minor clock readback fixes
  drm/nv40/pm: execute memory reset script from vbios
  drm/nv50/gr: refactor initialisation
  drm/nouveau: if requested, try harder at disabling sysmem pushbufs
  drm/nv50/gr: enable ctxprog xfer only when we need it to save power
  drm/nouveau/dp: add support for displayport table 0x30
  drm/nouveau/dp: return master dp table pointer too when looking up encoder
  drm/nouveau/bios: simplify U/d table hash matching func to just match
  drm/nouveau/dp: preserve non-pattern bits in DP_TRAINING_PATTERN_SET
  drm/nvc0/gr: remove MODULE_FIRMWARE() lines
  drm/nouveau/dp: use alternate lane mask for nvaf
  drm/nouveau/dp: link rate scripts are selected with a comparison table
  drm/nv40/pm: write nv40-specific reclocking routines
  drm/nv40/pm: parse geometric delta clock from vbios
  ...
2011-09-20 09:35:22 +01:00
Tomi Valkeinen
f36465822d OMAP: DSS2: remove unneeded fck enable/disables
Now that the HWMOD fmwk handles the fcks of DSS modules properly, the
DSS driver no longer needs to explicitely enable/disable the fck.

This patch removes the enables/disables of fck from dispc, dsi and dss.
The clk_get(fck) is still needed there, as the modules need to know the
frequency of the clock.

For hdmi and venc this patch also removes the clk_get(fck), as they
don't need the clock at all.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-20 11:21:31 +03:00
Tomi Valkeinen
3393b85340 Revert "OMAP: DSS2: HDMI: fix hdmi clock name"
This reverts commit df5d3ed23c.

The HDMI clock name has been fixed in HWMOD data.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-20 11:21:31 +03:00
Tomi Valkeinen
bfe4f8d32d Revert "HACK: OMAP: DSS2: clk hack for OMAP2/3"
This reverts commit 9ede365aa6.

The hack is no longer needed, as the HWMOD data has been fixed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-20 11:21:31 +03:00
Sascha Hauer
6da5ce1728 Merge branches 'cleanups/assorted' and 'cleanups/mm-tzic' into imx-cleanup
Conflicts:
	arch/arm/mach-mx5/Makefile

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-20 10:09:08 +02:00
Jason Liu
4c54239058 ARM: mx5/mm: consolidate TZIC map code
Use a static mapping for TZIC to get rid of the duplicated code for
ioremap and the corresponding error handling. This is already done on
i.MX50.

This patch also removes TZIC mapping for i.mx51 TO1 since
there is no support for TO1 now since the following commit:
9ab4650 (ARM: imx: Get the silicon version from the IIM module)

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-09-20 09:55:06 +02:00
Jason Liu
281e10da20 ARM: mx5/mm: Remove MX51_DEBUG related mapping
MX51_DEBUG related mapping is dead code, no-one uses it

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-09-20 09:54:58 +02:00
Jason Liu
abca2e10fe ARM: mx5/mm: move i.MX50 mm stuff into mm.c
i.MX50 is similar enough to i.MX51/53 to handle it in a single file.
No functional change.

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-09-20 09:54:50 +02:00
Fabio Estevam
a35b91474c ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded
Currently framebuffer and MMC devices are registered even if their associated
GPIO pins fail to be requested.

Change the logic so that the registration of such devices only occurs if their
GPIO requests succeeded.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-20 09:45:09 +02:00
Fabio Estevam
bbb433639c ARM: mach-qong: Add watchdog support
Add watchdog support for mach-qong target.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by : Stefano Babic <sbabic@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-20 09:41:12 +02:00
Takashi Iwai
290b421f69 Merge branch 'fix/hda' into topic/hda 2011-09-20 09:14:04 +02:00
David Henningsson
46724c2e02 ALSA: HDA: Add support for IDT 92HD93
Cc: stable@kernel.org
BugLink: http://bugs.launchpad.net/bugs/854468
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 09:13:18 +02:00
Alexander Duyck
1cc3bd8792 igb: Remove multi_tx_table and simplify igb_xmit_frame
Instead of using the multi_tx_table to map possible Tx queues to Tx rings
we can just do simple subtraction for the unlikely event that the Tx queue
provided exceeds the number of Tx rings.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:59:34 -07:00
Alexander Duyck
6013690699 igb: Replace E1000_XX_DESC_ADV with IGB_XX_DESC
Since igb only uses advanced descriptors we might as well just use an IGB
specific define and drop the _ADV suffix for the descriptor declarations.
In addition this can be further reduced by assuming that it will be working
on pointers since that is normally how the Tx descriptors are handled.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:59:14 -07:00
Alexander Duyck
cd392f5ca9 igb: drop the "adv" off function names relating to descriptors
Many of the function names in the hot path are carrying an extra "_adv"
suffix on the end of them to represent the fact that they are using
advanced descriptors instead of legacy descriptors.  However since all igb
uses are advanced descriptors adding the extra suffix doesn't really add
any additional data.  Since this is the case it is easiest to just drop the
suffix and save us from having to store the extra characters.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:58:56 -07:00
Alexander Duyck
16eb8815c2 igb: Refactor clean_rx_irq to reduce overhead and improve performance
This change is meant to be a general cleanup and performance improvement
for clean_rx_irq.  The previous patch should have updated the allocation so
that the rings can be treated as read-only within the clean_rx_irq
function.  In addition I am re-ordering the operations such that several
goals are accomplished including reducing the overhead for packet
accounting, reducing the number of items on the stack, and improving
overall performance.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:58:20 -07:00
Alexander Duyck
238ac817fd igb: update ring and adapter structure to improve performance
This change is meant to improve performance by splitting the Tx and Rx
rings into 3 sections.  The first is primarily a read only section
containing basic things like the indexes, a pointer to the dev and netdev
structures, and basic information.  The second section contains the stats
and next_to_use and next_to_clean values.  The third section is primarily
unused values that can just be placed at the end of the ring and are not
used in the hot path.

The adapter structure has several sections that are read in the hot path.
In order to improve performance there I am combining the frequent read
hot path items into a single cache line.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:58:04 -07:00
Alexander Duyck
c023cd8898 igb: streamline Rx buffer allocation and cleanup
This change is meant to streamline the Rx buffer allocation and cleanup.
This is accomplished by reducing the number of writes by only having the Rx
descriptor ring written by software during allocation, and it will only be
read during cleanup.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:57:42 -07:00
Alexander Duyck
44390ca6cb igb: drop support for single buffer mode
This change removes support for single buffer mode from igb and makes the
driver function in packet split always.  The advantage to doing this is
that we can reduce total memory allocation overhead significantly as we
will only need to allocate one 1K slab per packet and then make use of a
reusable half page instead of allocating a 2K slab per packet.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:57:22 -07:00
Alexander Duyck
153285f9ce igb: Update max_frame_size to account for an optional VLAN tag if present
This patch modifies the max_frame_size in order account for an optional
VLAN tag.  In order to support this we must also increase the
MAX_STD_JUMBO_FRAME_SIZE to account for the 4 extra bytes.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:57:04 -07:00
Clemens Ladisch
5495ffbd7b ALSA: via82xx: allow to disable the SRC
Add the PCM rule to allow disabling the PCM playback SRC.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 08:57:00 +02:00
Clemens Ladisch
57e5c63007 ALSA: emu10k1: allow to disable the SRC
Add the PCM rule to allow disabling the PCM playback SRC.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 08:56:58 +02:00
Clemens Ladisch
5b0416a3c2 ALSA: ymfpci: allow to disable the SRC
Add the PCM rules to allow disabling the PCM playback and capture SRCs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 08:56:56 +02:00
Clemens Ladisch
d5b702a64b ALSA: pcm: add snd_pcm_hw_rule_noresample()
Add a helper function to allow drivers to disable hardware resampling
when the application has specified the SNDRV_PCM_HW_PARAMS_NORESAMPLE
flag.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 08:56:45 +02:00
Clemens Ladisch
84f9df159d ALSA: ymfpci: fix PCM open error handling
The installation of the minimum period size constraint in the PCM open
callbacks was not checked for errors.  Add this check, and move the call
to the beginning of the function to avoid having to do any cleanups in
the error case.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 08:56:34 +02:00
Alexander Duyck
a74420e0f3 igb: Update RXDCTL/TXDCTL configurations
This change cleans up the RXDCTL and TXDCTL configurations and optimizes RX
performance by allowing back write-backs on all hardware other than 82576.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-19 23:56:33 -07:00
Barry Song
463894705e dmaengine: delete redundant chan_id and chancnt initialization in dma drivers
dma_async_device_register will re-init chan_id and chancnt,
so whatever chan_id and chancnt are set in drivers, they will
be re-written by dma_async_device_register.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Piotr Ziecik <kosmo@semihalf.com>
Cc: Yong Wang <yong.y.wang@intel.com>
Cc: Jaswinder Singh <jassi.brar@samsung.com>
Cc: Pelagicore AB <info@pelagicore.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-20 11:51:33 +05:30
Anshuman Khandual
a120db06c3 perf events, powerpc: Add POWER7 stalled-cycles-frontend/backend events
perf events, powerpc: Add POWER7 stalled-cycles-frontend/backend events

Extent the POWER7 PMU driver with definitions for generic front-end and back-end
stall events.

As explained in Ingo's original comment(8f62242246351b5a4bc0c1f00c0c7003edea128a
), the exact definitions of the stall events are very much processor specific as

different things mean different in their respective instruction pipeline. These
two Power7 raw events are the closest approximation to the concept detailed in
Ingo's comment.

[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */
It means cycles when the Global Completion Table has no slots from this thread

[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a,  /* CMPLU_STALL */
It means no groups completed and GCT not empty for this thread

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:12:56 +10:00
Benjamin Herrenschmidt
82ba129bae powerpc/powernv: Handle PCI-X/PCIe reset delay
The firmware doesn't wait after lifting the PCI reset. However it does
timestamp it in the device tree. We use that to ensure we wait long
enough (3s is our current arbitrary setting) from that timestamp to
actually probing the bus.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:12:54 +10:00
Benjamin Herrenschmidt
c1a2562ac5 powerpc/powernv: Implement MSI support for p5ioc2 PCIe
This implements support for MSIs on p5ioc2 PHBs. We only support
MSIs on the PCIe PHBs, not the PCI-X ones as the later hasn't been
properly verified in HW.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:12:44 +10:00
Ben Skeggs
a0d9a8feb9 drm/nouveau: remove allocations from gart populate() hook
Since some somewhat questionable changes a while back, TTM provides a
completely empty array of struct dma_address that stays around for the
entire lifetime of the TTM object.

Lets use this array, *always*, rather than wasting yet more memory on
another array who's purpose is identical, as well as yet another bool array
of the same size saying *which* of the previous two arrays to use...

This change will also solve the high order allocation failures seen by
some people while using nouveau.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-20 16:12:27 +10:00
Ben Skeggs
a14845121c drm/nvc0/fb: slightly improve PMFB intr handling, move out of nvc0_graph.c
I'm still not certain how to determine the number of SUBPs are present on
a given board.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-20 16:12:21 +10:00
Ben Skeggs
3dcbb02b3a drm/nvc0/fifo: avoid touching missing subfifos
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-20 16:12:18 +10:00
Ben Skeggs
84e2ad8b7b drm/nvd9/disp: bail out of mode_set_base if no fb bound to crtc
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-20 16:12:11 +10:00
Ben Skeggs
c20ab3e1cb drm/nvd9/disp: stub some more api hooks so we don't oops on resume
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-20 16:12:08 +10:00
Marcin Slusarz
ff920bfbe6 drm/nouveau: fix printk typo in ioremap failure path
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-20 16:12:05 +10:00