Commit graph

287,753 commits

Author SHA1 Message Date
Hidetoshi Seto
9aaef96f61 x86, mce: Do not call del_timer_sync() in IRQ context
del_timer_sync() can cause a deadlock when called in interrupt context.
It is used with on_each_cpu() in some parts for sysfs files like bank*,
check_interval, cmci_disabled and ignore_ce.

However, use of on_each_cpu() results in calling the function passed
as the argument in interrupt context. This causes a flood of nested
warnings from del_timer_sync() (it runs on each CPU) caused even by a
simple file access like:

$ echo 300 > /sys/devices/system/machinecheck/machinecheck0/check_interval

Fortunately, these MCE-specific files are rarely used and AFAIK only few
MCE geeks experience this warning.

To remove the warning, move timer deletion outside of the interrupt
context.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-09-14 15:50:15 +02:00
Ohad Ben-Cohen
e7f10f02ef iommu/omap: Migrate to the generic fault report mechanism
Start using the generic fault report mechanism, as provided by
the IOMMU core, and remove its now-redundant omap_iommu_set_isr API.

Currently we're only interested in letting upper layers know about the
fault, so in case the faulting device is a remote processor, they could
restart it.

Dynamic PTE/TLB loading is not supported.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-09-14 15:36:35 +02:00
Ohad Ben-Cohen
4f3f8d9db3 iommu/core: Add fault reporting mechanism
Add iommu fault report mechanism to the IOMMU API, so implementations
could report about mmu faults (translation errors, hardware errors,
etc..).

Fault reports can be used in several ways:
- mere logging
- reset the device that accessed the faulting address (may be necessary
  in case the device is a remote processor for example)
- implement dynamic PTE/TLB loading

A dedicated iommu_set_fault_handler() API has been added to allow
users, who are interested to receive such reports, to provide
their handler.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-09-14 15:35:36 +02:00
Michel Dänzer
db318d7a8a drm/radeon: Unreference GEM object outside of spinlock in page flip error path.
Should fix https://bugzilla.redhat.com/show_bug.cgi?id=726277 .

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14 13:36:39 +01:00
Michel Dänzer
87463ff83b drm/radeon: Don't read from CP ring write pointer registers.
Apparently this doesn't always work reliably, e.g. at resume time.

Just initialize to 0, so the ring is considered empty.

Tested with hibernation on Sumo and Cayman cards.

Should fix https://bugs.launchpad.net/ubuntu/+source/linux/+bug/820746/ .

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14 13:35:35 +01:00
Ben Skeggs
ff02b13f68 drm/ttm: request zeroed system memory pages for new TT buffer objects
Fixes an information leak to userspace, we were handing out un-zeroed pages
for any newly created TTM_PL_TT buffer.

Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14 13:34:51 +01:00
Nicolas Pitre
72cc205611 ARM: Dove: fix second SPI initialization call
Commit 980f9f601a "ARM: orion: Consolidate SPI initialization."
broke it by overwriting the SPI0 registration.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-14 14:31:43 +02:00
Mi Jinlong
038c01598e SUNRPC: compare scopeid for link-local addresses
For ipv6 link-local addresses, sunrpc do not compare those scope id.
This patch let sunrpc compares scope id only on link-local addresses.

Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-14 08:22:02 -04:00
Mi Jinlong
849a1cf13d SUNRPC: Replace svc_addr_u by sockaddr_storage
For IPv6 local address, lockd can not callback to client for
missing scope id when binding address at inet6_bind:

 324       if (addr_type & IPV6_ADDR_LINKLOCAL) {
 325               if (addr_len >= sizeof(struct sockaddr_in6) &&
 326                   addr->sin6_scope_id) {
 327                       /* Override any existing binding, if another one
 328                        * is supplied by user.
 329                        */
 330                       sk->sk_bound_dev_if = addr->sin6_scope_id;
 331               }
 332
 333               /* Binding to link-local address requires an interface */
 334               if (!sk->sk_bound_dev_if) {
 335                       err = -EINVAL;
 336                       goto out_unlock;
 337               }

Replacing svc_addr_u by sockaddr_storage, let rqstp->rq_daddr contains more info
besides address.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-14 08:21:48 -04:00
David Henningsson
2e1210bc3d ALSA: HDA: Cirrus - fix "Surround Speaker" volume control name
This patch fixes "Surround Speaker Playback Volume" being cut off.
(Commit b4dabfc452 was probably meant to fix this, but it fixed
only the "Switch" name, not the "Volume" name.)

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 13:45:12 +02:00
Yong Zhang
cb475de3d1 lib: atomic64: Change the type of local lock to raw_spinlock_t
There are still some leftovers of commit f59ca058
[locking, lib/atomic64: Annotate atomic64_lock::lock as raw]

[ tglx: Seems I picked the wrong version of that patch :( ]

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shan Hai <haishan.bai@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20110914074924.GA16096@zhy
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-14 13:14:11 +02:00
Jean Delvare
cd5bd3df1a hwmon: (coretemp) Initialize tmin
ttarget is initialized when the driver is loaded, but tmin is not.
As a result, tempX_max_hyst attributes read 0. Fix this.

Also use THERM_*_THRESHOLD* constants in these initializations instead
of hard-coding the constants.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "R, Durgadoss" <durgadoss.r@intel.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-09-14 03:55:05 -07:00
Eliad Peller
045c745f8c wl12xx: support p2p interfaces
Declare support for p2p interfaces, and create p2p_cli/p2p_go
roles when being asked for.

Indicate we are using a p2p interface by setting the wl->p2p flag.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 13:15:20 +03:00
Arik Nemtsov
93f8c8e025 wl12xx: set mac80211 flags for A-MPDU aggregation support
We set the mac80211 flag for A-MPDU support and also indicate that
Tx-agg session setup is performed in HW.

This patch depends on
"mac80211: add flag to indicate HW only Tx-agg setup support"

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 13:15:19 +03:00
Arik Nemtsov
f1acea9a9d wl12xx: AP mode - clean BA and queue state in tx_reset
Reset the BA state of all connected stations and explicitly clear the
Tx queues. The latter is needed for clearing dummy packets from
tx_queue_count.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 13:15:19 +03:00
Arik Nemtsov
f4d3b6ab5e wl12xx: AP mode - enable the BA constraint event from the FW
Unblock the RX BA constraint event from firmware in AP mode as well.
This allows us to stop RX BA sessions when the FW requests it.

In addition refactor the handler for this event to make the flow
clearer.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 13:15:18 +03:00
Arik Nemtsov
da03209eac wl12xx: don't regulate links when a single STA is connected
When operating as AP track the number of connected stations. When a
single STA is connected don't regulate the PS status of the link.
Since this is the only STA connected, there's no point holding space in
FW for other links. This will speed up communications with a single
connected STA in PSM.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 13:15:17 +03:00
Arik Nemtsov
c47e8229fa wl12xx: support up to 8 stations in AP-mode
Change the max number of AP stations to 8, up from 5.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 13:15:16 +03:00
Arik Nemtsov
56d4f8f685 wl12xx: AP mode - don't regulate FW blocks for non-active STAs
Check a STA is associated before regulating its PS-status in mac80211.
Should never happen, so warn as a precaution.

[Small cosmetic change wrt Kalle Valo's comment. -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 13:15:05 +03:00
Mark Brown
32d2a0c17d ASoC: Correct channel numbers for WM8996 AIF2
The AIF1 channels are numbered from zero than one; do the same thing for
AIF2 too.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-14 11:00:07 +01:00
Mark Brown
c83495af63 ASoC: Disable WM8996 CPVDD supply when not in use
The WM8996 only requires CPVDD when the charge pump is active so control
it separately to the other supplies, only enabling it when the charge pump
is active. This will result in a small power saving on systems which are
able to provide independent software control of the supply.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-14 10:59:36 +01:00
Mark Brown
da07ecd93b regulator: Implement deferred disable support
It is a reasonably common pattern for hardware to require some delay after
being quiesced before the disable has finalised, especially in mixed signal
devices. For example, an active discharge may be required to ensure that
the circuit starts up again in a known state. Avoid having to implement
such delays in the regulator API by providing regulator_deferred_disable()
which will do a regulator_disable() a specified number of milliseconds
after it is called.

Due to the reference counting done on regulators a deferred disable can
be cancelled by doing another regulator_enable().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-14 10:58:23 +01:00
Arik Nemtsov
f8e0af6b87 wl12xx: don't indicate up PS-filtered dummy packets
Dummy packets are currently only sent on the system_hlid link. The
system_hlid link should never be filtered for PS (as it is not
a STA link). Even so, for correctness, don't indicate dummy packets up.
The skb does not belong to mac80211 and as such does not contain a
correct skb->cb.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 12:43:51 +03:00
Luciano Coelho
20a33e52ed wl12xx: ignore sched scan match sets without SSID
For now, cfg80211 only support match sets with SSIDs, but in the
future more parameters will be added.  This patch ignores eventual
matches that do not contain SSIDs in preparation for the future.  This
change also affects the case where broadcast SSIDs are used.  Matching
a broadcast SSID will match everything, so they can be ignored.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 12:18:38 +03:00
Luciano Coelho
221737d24f wl12xx: increase number of allowed SSIDs in sched_scan
The latest firmware supports up to 16 SSIDs in the scheduled scan
lists.  Increase the number we report to cfg80211 and increase the
min/max dwell time to 30 and 60 TUs respectively, because otherwise we
don't have the time to send the probes for all SSIDs.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 12:18:38 +03:00
Luciano Coelho
fb55377b2a wl12xx: add support for sched_scan filters
Implement support for filtering in scheduled scans.

With this commit we now use the match sets passed by cfg80211 to
filter on SSIDs.  Due to the nature of the wl12xx firmware API, we
don't allow SSIDs to be sent in the probe requests if they are not
going to match any of the filters.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 12:18:38 +03:00
Eliad Peller
1ec23f7f70 wl12xx: declare support for WIPHY_FLAG_AP_UAPSD
Declare support for uapsd when working as AP, and
set psd_type and sp_len whan a station is being added.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 12:09:38 +03:00
Clemens Ladisch
dba8b46992 ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 11:00:51 +02:00
Thomas Gleixner
4523f6ada8 alarmtimers: Fix error handling
commit 8bc0daf (alarmtimers: Rework RTC device selection using class
interface) did not implement required error checks. Add them.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-14 10:54:29 +02:00
Eliad Peller
b6883582a8 wl12xx: use kstrtoul_from_user
simplify code by calling kstrtoul_from_user() (instead of
copy_from_user() + kstrtoul())

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:43 +03:00
Luciano Coelho
04907011d5 wl12xx: remove deprecated CONFIG_WL12XX_HT flag
The driver now support HT properly, so we can always have HT enabled.

Remove the WL12XX_HT configuration.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:34 +03:00
Arik Nemtsov
14623787ab wl12xx: don't queue a new dummy packet if one is already pending
The firmware only asks for one dummy packet at a time, but sometimes we
are unable to provide it before a FW timer expires. When this happens,
the FW will re-request the dummy packet. If a packet is still queued in
the driver queues, do nothing in this case.

This prevents spurious dummy packets from clogging up the VO AC.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
9487775c5b wl12xx: add config_hangover command
Add wl12xx_acx_config_hangover() and respective conf values.
This command configures how long the chip will stay awake
after it was configured to enter psm.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
e0b38265b0 wl12xx: check for ROC on scan_complete
When scan completes, and we are not associated, we should start
the dev role and ROC. however, we might already be in this situation
(e.g. if we got disconnected during scan). check for it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
2ec7da254c wl12xx: don't use WL1271_SCAN_OPT_PRIORITY_HIGH flag
When setting the WL1271_SCAN_OPT_PRIORITY_HIGH flag, the
driver requests a scan *now*, and the fw doesn't enter psm
before scanning, which in turn might cause packets loss.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
87579550b2 wl12xx: don't disconnect on recovery
allow full connection recovery by dropping the
beacon_loss notification.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
a0a521560a wl12xx: add beacon_filtering debugfs file
Allow enabling/disabling beacon_filtering by debugfs,
in order to reduce the log size while debugging (beacon
filtering is disabled by default in AP mode, as beacons
are needed for ERP configuration).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:18 +03:00
Eliad Peller
2a5bff091f wl12xx: add module_param to trigger BUG() on recovery
Crashing on recovery is useful for debugging, as a JTAG
can be connected in order to investigate the current fw state.
(otherwise, a reconfiguration will occur)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:18 +03:00
Eliad Peller
5c472148b0 wl12xx: print the seq_num of rx packet
Make it easier to match the driver log against
a sniffer log.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:18 +03:00
Eliad Peller
c91d06006d wl12xx: print acx id
Add id param to the acx debug print (on wl1271_cmd_configure)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:17 +03:00
Luciano Coelho
c6ceb8726f Merge branch 'wl12xx-next' into for-linville 2011-09-14 11:32:15 +03:00
Tao Ma
8ad6a56f56 block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request
In __blk_complete_request, we check both QUEUE_FLAG_SAME_COMP and req->cpu
to decide whether we should use req->cpu. Actually the user can also
select the complete cpu by either setting BIO_CPU_AFFINE or by calling
bio_set_completion_cpu. Current solution makes these 2 ways don't work
any more. So we'd better just check req->cpu.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-14 09:31:01 +02:00
Boojin Kim
51ddf31da1 ARM: SAMSUNG: Remove Samsung specific enum type for dma direction
This patch removes the samsung specific enum type 's3c2410_dmasrc'
and uses 'dma_data_direction' instead.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:04 +05:30
Boojin Kim
344b4c4888 ASoC: Samsung: Update DMA interface
This patch adds to support the DMA PL330 driver that uses
DMA generic API. Samsung sound driver uses DMA generic API
if architecture supports it. Otherwise, use samsung specific
S3C-PL330 API driver to transfer PCM data.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: removed useless variable]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:04 +05:30
Boojin Kim
82ab8cd7ec spi/s3c64xx: Merge dma control code
This patch modifies to merge the dma control code. Original
s3c64xx spi driver has each dma control code for rx and tx
channel. This patch merges these dma control codes into one.
With this patch, a dma setup function and callback function
handle for both rx and tx channel.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
39d3e8074e spi/s3c64xx: Add support DMA engine API
This patch adds to support DMA generic API to transfer raw
SPI data. Basiclly the spi driver uses DMA generic API if
architecture supports it. Otherwise, uses Samsung specific
S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
978ce50dd5 ARM: SAMSUNG: Remove S3C-PL330-DMA driver
Since DMA generic APIs can be used for Samsung DMA now so that
the s3c-pl330 which includes Samsung specific DMA APIs can be
removed.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
3091e61173 ARM: S5P64X0: Use generic DMA PL330 driver
This patch makes Samsung S5P64X0 to use DMA PL330 driver
on DMADEVICE. The S5P64X0 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
a422bd0f6d ARM: S5PC100: Use generic DMA PL330 driver
This patch makes Samsung S5PC100 to use DMA PL330 driver
on DMADEVICE. The S5PC100 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
dafc954304 ARM: S5PV210: Use generic DMA PL330 driver
This patch makes Samsung S5PV210 to use DMA PL330 driver
on DMADEVICE. The S5PV210 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:02 +05:30