Commit graph

287,753 commits

Author SHA1 Message Date
Theodore Ts'o
3212a80a58 ext4: convert block group-relative offsets to use clusters
Certain parts of the ext4 code base, primarily in mballoc.c, use a
block group number and offset from the beginning of the block group.
This offset is invariably used to index into the allocation bitmap, so
change the offset to be denominated in units of clusters.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:46:51 -04:00
Theodore Ts'o
d5b8f31007 ext4: bigalloc changes to block bitmap initialization functions
Add bigalloc support to ext4_init_block_bitmap() and
ext4_free_blocks_after_init().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:44:51 -04:00
Theodore Ts'o
fd034a84e1 ext4: split out ext4_free_blocks_after_init()
The function ext4_free_blocks_after_init() used to be a #define of
ext4_init_block_bitmap().  This actually made it difficult to
understand how the function worked, and made it hard make changes to
support clusters.  So as an initial cleanup, I've separated out the
functionality of initializing block bitmap from calculating the number
of free blocks in the new block group.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:42:51 -04:00
Miklos Szeredi
0ec26fd069 vfs: automount should ignore LOOKUP_FOLLOW
Prior to 2.6.38 automount would not trigger on either stat(2) or
lstat(2) on the automount point.

After 2.6.38, with the introduction of the ->d_automount()
infrastructure, stat(2) and others would start triggering automount
while lstat(2), etc. still would not.  This is a regression and a
userspace ABI change.

Problem originally reported here:

  http://thread.gmane.org/gmane.linux.kernel.autofs/6098

It appears that there was an attempt at fixing various userspace tools
to not trigger the automount.  But since the stat system call is
rather common it is impossible to "fix" all userspace.

This patch reverts the original behavior, which is to not trigger on
stat(2) and other symlink following syscalls.

[ It's not really clear what the right behavior is.  Apparently Solaris
  does the "automount on stat, leave alone on lstat".  And some programs
  can get unhappy when "stat+open+fstat" ends up giving a different
  result from the fstat than from the initial stat.

  But the change in 2.6.38 resulted in problems for some people, so
  we're going back to old behavior.  Maybe we can re-visit this
  discussion at some future date  - Linus ]

Reported-by: Leonardo Chiquitto <leonardo.lists@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Ian Kent <raven@themaw.net>
Cc: David Howells <dhowells@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-09 15:42:34 -07:00
Theodore Ts'o
49f7f9af4b ext4: factor out block group accounting into functions
This makes it easier to understand how ext4_init_block_bitmap() works,
and it will assist when we split out ext4_free_blocks_after_init() in
the next commit.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:40:51 -04:00
Theodore Ts'o
7137d7a48e ext4: convert instances of EXT4_BLOCKS_PER_GROUP to EXT4_CLUSTERS_PER_GROUP
Change the places in fs/ext4/mballoc.c where EXT4_BLOCKS_PER_GROUP are
used to indicate the number of bits in a block bitmap (which is really
a cluster allocation bitmap in bigalloc file systems).  There are
still some places in the ext4 codebase where usage of
EXT4_BLOCKS_PER_GROUP needs to be audited/fixed, in code paths that
aren't used given the initial restricted assumptions for bigalloc.
These will need to be fixed before we can relax those restrictions.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:38:51 -04:00
Theodore Ts'o
bab08ab964 ext4: enforce bigalloc restrictions (e.g., no online resizing, etc.)
At least initially if the bigalloc feature is enabled, we will not
support non-extent mapped inodes, online resizing, online defrag, or
the FITRIM ioctl.  This simplifies the initial implementation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:36:51 -04:00
Theodore Ts'o
281b599597 ext4: read-only support for bigalloc file systems
This adds supports for bigalloc file systems.  It teaches the mount
code just enough about bigalloc superblock fields that it will mount
the file system without freaking out that the number of blocks per
group is too big.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:34:51 -04:00
Theodore Ts'o
7c2e70879f ext4: add ext4-specific kludge to avoid an oops after the disk disappears
The del_gendisk() function uninitializes the disk-specific data
structures, including the bdi structure, without telling anyone
else.  Once this happens, any attempt to call mark_buffer_dirty()
(for example, by ext4_commit_super), will cause a kernel OOPS.

Fix this for now until we can fix things in an architecturally correct
way.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:28:51 -04:00
Jonathan Cameron
25d7315a19 staging:iio:light: V3 fix out of bounds reg_cache[] access
V3 is a straightforward forward port to teh current tree of V2.

Simple fix is to just not cache REG_TEST (offset 8).
Cache doesn't help REG_TEST anyway since we write all 8 bits exactly once
(at resume/init time).

Also fix an "off-by-one" allocation of reg_cache[] array size that
was in the original code before I touched it.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:47:30 -07:00
K. Y. Srinivasan
66e60413db Staging: hv: vmbus: Cleanup dated comments in channel_mgmt.c
Cleanup dated comments in channel_mgmt.c.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:45:39 -07:00
K. Y. Srinivasan
696453ba28 Staging: hv: vmbus: Rename vmbus_child_device_unregister
The vmbus devices are NOT child devices; rename vmbus_child_device_unregister
to reflect this.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:45:39 -07:00
K. Y. Srinivasan
2279428197 Staging: hv: vmbus: Rename vmbus_child_device_register
The vmbus devices are NOT child devices; rename vmbus_child_device_register
to reflect this.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:45:39 -07:00
K. Y. Srinivasan
f2c7301111 Staging: hv: vmbus: Rename vmbus_child_device_create
The vmbus devices are NOT child devices; rename vmbus_child_device_create
to reflect this.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:45:38 -07:00
H Hartley Sweeten
170786474a staging: dt3155v4l: remove irq_handler from struct dt3155_priv
There is no reason to cache the irq_handler in struct dt3155_priv.  Just pass
the function directly in request_irq.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:33:19 -07:00
Pieter-Augustijn Van Malleghem
1c601beaf2 Input: bcm5974 - add MacBookAir4,1 trackpad support
This patch adds trackpad support for the MacBookAir4,1, released in July 2011.
It is very similar to the MacBookAir4,2 patch submitted by Joshua Dillon and
Chase Douglas.

Signed-off-by: Pieter-Augustijn Van Malleghem <p-a@scarlet.be>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 13:32:27 -07:00
H Hartley Sweeten
f748b65bfc staging: dt3155v4l: pci_iomap returns a void __iomem * not a void *
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:30:58 -07:00
H Hartley Sweeten
c94a2e4737 staging: dt3155v4l: Remove printk noise
Most of the printk's in this driver are just noise. Proper error codes
are being returned so just remove the noise and clean up the whitespace
in the code due to the removal.

The two messages left in the probe are useful. Convert them to dev_info
messages.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:30:53 -07:00
Oren Weil
cf05e52b02 staging: mei: adding watchdog core dependency to kconfig
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:21 -07:00
Oren Weil
d8deca315b staging: mei: adding mei_wd_stop function comment
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:21 -07:00
Oren Weil
214b99fd41 staging: mei: removing wd module parameters
wd module parameter is not needed now that driver is using watchdog core.

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:21 -07:00
Oren Weil
2ad64ba8ea staging: mei: client init code cleanup
starting removing the dependency from the module parameters.
setting the default timeout on init so don't need to check if it is bigger
then zero.

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:21 -07:00
Oren Weil
6d70e93559 staging: mei: resuming timer regardless of the watchdog timeout value.
the timer_work does not only handle watchdog but also handles mei timeouts.

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:21 -07:00
Oren Weil
a61c6530a6 staging: mei: renaming delayed work field and function to a meaningful name.
the wd_work and mei_wd_timer() function was not just for watchdog.
mei managing the AMT watchdog going to be replace by the kernel watchdog
interface.

the mei_timer() will still manage the mei driver timeouts.

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:21 -07:00
Oren Weil
55d3385672 staging: mei: adding set_timeout watchdog function
add the ability to let the watchdog core set
the AMT watchdog timeout value.

the default value will be only set in the start function.

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:20 -07:00
Oren Weil
8c4a59a789 staging: mei: adding watchdog ping
adding watchdog ping to send ping/heartbeat to the the AMT watchdog client.
in addition removing the heartbeat sending from the driver timers function.

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:20 -07:00
Oren Weil
4a3cafd5d9 staging: mei: adding watchdog ops
adding start and stop function.
start - check if AMT wd client is connected, which is been connected on driver
load.
stop - send stop command to AMT wd.

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:20 -07:00
Oren Weil
9ce178e539 staging: mei: registering the MEI driver with the kernel watchdog core interface
Adding kernel watchdog interface (/dev/watchdog) to the MEI Driver to support AMT Watchdog feature.
This patch and the following one will replace MEI Driver self management of the AMT watchdog
with the standard kernel watchdog interface.

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:20 -07:00
Oren Weil
92eb401343 staging: mei: fix register access function comments
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:20 -07:00
Oren Weil
617aa39639 staging: mei: removing dependency between WD and AMTHI init function.
AMTHI need to be initialized after WD Client was initialized, moving the AMTHI outside
of the WD initialization function.
in order to remove the coupling between the initialization of those clients.

AMTHI is getting initialized (getting connected to the FW feature/client) in two ways:
 1) if mei driver fails to send connect message to watchdog client (WD initialization), then
    immediately the AMTHI client getting initialized right after the watchdog initialization function.
 2) if Watchdog client success to send connect message to watchdog client, then only after
    the driver is getting the connect response message the AMTHI client is getting initialized

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:28:20 -07:00
Manohar Vanga
f6c39d4f2d staging: vme: change static device array to pointers
Change the static array of 'struct device''s in struct vme_bridge
to instead use an array of pointers. This is in accordance with the
requirement that all kobjects be dynamically allocated (see
Documentation/kobject.txt) and never be statically allocated.

Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 13:26:32 -07:00
Anton Vorontsov
7caaf7efb9 ARM: cns3xxx: Fix newly introduced warnings in the PCIe code
commit d5341942d7 ("PCI: Make the struct
pci_dev * argument of pci_fixup_irqs const") did not change argument
of pdev_to_cnspci(), and thus introduced the following warnings:

  CHECK   arch/arm/mach-cns3xxx/pcie.c
pcie.c:177:60: warning: incorrect type in argument 1 (different modifiers)
pcie.c:177:60:    expected struct pci_dev *dev
pcie.c:177:60:    got struct pci_dev const *dev
  CC      arch/arm/mach-cns3xxx/pcie.o
pcie.c: In function 'cns3xxx_pcie_map_irq':
pcie.c:177: warning: passing argument 1 of 'pdev_to_cnspci' discards qualifiers from pointer target type
pcie.c:52: note: expected 'struct pci_dev *' but argument is of type 'const struct pci_dev *'

This patch fixes the issue.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-09-09 23:33:34 +04:00
Tommy Lin
83a497cab1 ARM: cns3xxx: Fix compile error caused by hardware.h removed
Commit c9d95fbe59 "ARM: convert PCI defines
to variables" deleted cns3xxx' hardware.h, but didn't remove references
for it, so do it now.

This patch removes lines that refer to hardware.h.

Signed-off-by: Tommy Lin <tommy.lin.1101@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-09-09 23:03:32 +04:00
Michael Krufky
2d04c13a50 [media] dvb-usb: improve sanity check of adap->active_fe in dvb_usb_ctrl_feed
The check for (adap->active_fe < 0) at the top of dvb_usb_ctrl_feed is a sanity
check to ensure that adap->active_fe is valid.  Improve that sanity check
by also checking for (adap->active_fe >= adap->num_frontends_initialized)

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-09 15:28:04 -03:00
Lars-Peter Clausen
30ab1e7886 ASoC: ad193x: Setup regmap read and write flag masks for SPI
Currently register read-back for the ad193x is broken, because it expects bit 0
of the upper byte to be set to indicate a read operation, while the regmap
default for SPI is to use bit 7.

This patch also addresses another oddity of the device. There are SPI and I2C
versions of this codec. In both cases the registers are 8-bit wide and numbered
from 0x0 to 0x10, but in the SPI case there is also a so called
'global address' which is prefixed in-front of the register address. The global
address mimics I2C behaviour and includes a static device address the and the
read/write flag. This basically extends the register address to an 16-bit value
numbered from 0x800 to 0x810. These are the register numbers which are
currently used by the driver. This works, because I2C will ignore the upper
8 bits of the register, but it is still a bit confusing, as there are no such
register numbers in the I2C case.

The approach taken by this patch is to number the registers from 0x00 to 0x10
and encode the global address for SPI mode into the read and write flag masks.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09 11:13:31 -07:00
Michael Krufky
4b5d01e9f6 [media] dvb-usb: fix streaming failure on channel change
This fixes a bug introduced by a previous changeset entitled,
[media] dvb-usb: refactor MFE code for individual streaming config per frontend

As reported by Antti Palosaari, This error is shown by VLC when channel changed:

[0x7f1bbc000cd0] dvb access error: DMXSetFilter: failed with -1 (Invalid argument)
[0x7f1bbc000cd0] dvb access error: DMXSetFilter failed
[0x7f1bbc32f910] main stream error: cannot pre fill buffer

After my own investigations, I've determined that this error case occurs when
the application stops streaming but leaves the frontend and dvr devices open.
A typical example of this usage would be a channel change operation while
watching live television. The error occurs when the application attempts to
stream after tuning to the new channel.

To prevent this error, don't set adap->active_fe to -1 unless the application
closes the device.

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-09 15:11:55 -03:00
Mark Brown
4ae7335dae Merge branch 'topic/interface' of git://opensource.wolfsonmicro.com/regmap into for-3.2 2011-09-09 11:11:24 -07:00
Mark Brown
b9fb3f3e77 Merge branch 'regmap-interface' into regmap-next 2011-09-09 11:10:45 -07:00
Mark Brown
069af897f9 regmap: Provide device read and write map interface for merging
Add the externally visible interface introduced by Lars-Peter's commit
6f3064 (regmap: Add support for device specific write and read flag
masks) separately in order to allow merge into other subsystems for
integration with drivers.  Drivers relying on this feature will not be
functional until they are merged with the implementation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09 11:05:46 -07:00
JJ Ding
1dc6edec12 Input: elantech - add v4 hardware support
v4 hardware is a true multitouch capable touchpad (up to 5 fingers).
The packet format is quite complex, please see protocol document for
reference.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:35:02 -07:00
JJ Ding
28f4961611 Input: elantech - add v3 hardware support
v3 hardware's packet format is almost identical to v2 (one/three finger touch),
except when sensing two finger touch, the hardware sends 12 bytes of data.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:58 -07:00
JJ Ding
3c8bbb951a Input: elantech - clean up elantech_init
Group property setting code into elantech_set_properties.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:55 -07:00
JJ Ding
7894f21b10 Input: elantech - packet checking for v2 hardware
For v2 hardware, there is no real parity check, but we can still check
some constant bits for data integrity.

Also rename elantech_check_parity_v1 to elantech_packet_check_v1 to make
these packet checking function names consistent.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:50 -07:00
JJ Ding
8a360d09b1 Input: elantech - remove ETP_EDGE_FUZZ_V2
Don't try to be too clever and remove ETP_EDGE_FUZZ_V2. X, Y ranges
should be just the raw resolution of the device. Otherwise, they can
cause underflow on the Y axis.

Suggested-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:40 -07:00
JJ Ding
230282a77b Input: elantech - use firmware provided x, y ranges
With newer hardware, the touchpad provides range info.
Let's use it.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:36 -07:00
JJ Ding
461a791765 Input: elantech - get rid of ETP_2FT_* in elantech.h
For two finger touches the coordinate of each finger gets reported
separately but with reduced resolution.

With this change, we now have the same range for ST and MT data and
scale MT data because it has lower resolution to match ST.

Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:31 -07:00
JJ Ding
1155961946 Input: elantech - correct x, y value range for v2 hardware
x, y values are actually 12-bit long. Also update protocol document to
reflect the change.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:25 -07:00
Randy Dunlap
b6b1e927ce Input: twl6040-vibra - fix compiler warning
Fix warning from Geert's build summary emails by changing "if" to
"ifdef". Thsi should fix the following:

drivers/input/misc/twl6040-vibra.c:231:5: warning: "CONFIG_PM_SLEEP" is not defined

Builds cleanly with CONFIG_PM_SLEEP enabled or disabled.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:16:21 -07:00
Axel Lin
694741471b ASoC: playpaq_wm8510: Return proper error if clk_get fails
Return proper error instead of 0 if clk_get fails.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09 09:42:00 -07:00
Dmitry Torokhov
95439cbad1 Input: tegra-kbc - tighten locking
Take spinlock when entering ISR and timer routine to ensure that we do not
race while enabling/disabling FIFO interrupts.

Also we do not need to take teh spinlock in tegra_kbc_startremove() since
interrupt is completely disabled.

Tested-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 09:25:50 -07:00