Commit graph

287,753 commits

Author SHA1 Message Date
Marek Lindner
a943cac144 batman-adv: merge update_transtable() into tt related code
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:22 +02:00
Marek Lindner
267151cdfd batman-adv: reuse tt_len() to calculate tt buffer length
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
2011-08-22 15:16:22 +02:00
Antonio Quartulli
df6edb9e69 batman-adv: print client flags in the local/global transtables output
Since clients can have several flags on or off, this patches make them
appear in the local/global transtable output so that they can be checked
for debugging purposes.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:22 +02:00
Antonio Quartulli
3d393e4732 batman-adv: implement AP-isolation on the sender side
If a node has to send a packet issued by a WIFI client to another WIFI client,
the packet is dropped.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:21 +02:00
Antonio Quartulli
59b699cdee batman-adv: implement AP-isolation on the receiver side
When a node receives a unicast packet it checks if the source and the
destination client can communicate or not due to the AP isolation

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:20 +02:00
Antonio Quartulli
bc2790808a batman-adv: detect clients connected through a 802.11 device
Clients connected through a 802.11 device are now marked with the
TT_CLIENT_WIFI flag. This flag is also advertised with the tt
announcement.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:20 +02:00
Antonio Quartulli
015758d002 batman-adv: correct several typ0s in the comments
Several typos have been corrected and some sentences have been rephrased

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:19 +02:00
Antonio Quartulli
1a1f37d925 batman-adv: hash_add() has to discriminate on the return value
hash_add() returns 0 on success while returns -1 either on error and on
entry already present. The caller could use such information to select
its behaviour. For this reason it is useful that hash_add() returns -1
in case on error and returns 1 in case of entry already present.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:19 +02:00
Mark Brown
fef24d92a6 Merge branch 'for-3.1' into for-3.2 2011-08-22 14:00:08 +01:00
Mark Brown
a41619455c ASoC: Clear completions from late WM8996 FLL lock IRQs
In case we have a pending completion, for example due to a problem with
the input clock which got corrected after we timed out.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 13:57:35 +01:00
Mark Brown
fbf04076ef ASoC: Provide more detail on WM8962 thermal shutdown status
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 13:56:47 +01:00
Jon Medhurst
97fef8bda9 ARM: Remove support for macro CONSISTENT_DMA_SIZE
There are now no platforms which set this macro.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
2011-08-22 12:00:12 +00:00
Jon Medhurst
9b74202402 ARM: mach-shmobile: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
CC: Paul Mundt <lethal@linux-sh.org>
CC: Magnus Damm <magnus.damm@gmail.com>
2011-08-22 12:00:12 +00:00
Jon Medhurst
2d5e975b21 ARM: mach-bcmring: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
CC: Jiandong Zheng <jdzheng@broadcom.com>
CC: Scott Branden <sbranden@broadcom.com>
2011-08-22 12:00:12 +00:00
Jon Medhurst
f407c2e38e ARM: mach-at91: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Ferre<nicolas.ferre@atmel.com>
2011-08-22 12:00:11 +00:00
Jon Medhurst
d70a5969e9 ARM: mach-u300: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2011-08-22 12:00:11 +00:00
Jon Medhurst
fd24f90318 ARM: mach-davinci: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
CC: Sekhar Nori <nsekhar@ti.com>
CC: Kevin Hilman <khilman@ti.com>
2011-08-22 12:00:11 +00:00
Jon Medhurst
389d12cc7f ARM: mxc: Remove setting of consistent dma size
All in-tree MX boards using video use memblock_* functions to get their
coherent dma space for the camera. So there is no need to increase
CONSISTENT_DMA_SIZE beyond the default 2MB and we can simply remove the
defines which do this.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-22 12:00:11 +00:00
Jon Medhurst
a06a58abec ARM: mach-s5pv210: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
CC: Kukjin Kim <kgene.kim@samsung.com>
2011-08-22 12:00:11 +00:00
Jon Medhurst
d9c295ad35 ARM: mach-s5p64x0: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
CC: Kukjin Kim <kgene.kim@samsung.com>
2011-08-22 12:00:10 +00:00
Jon Medhurst
284dc06008 ARM: mach-s3c64xx: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
CC: Ben Dooks <ben-linux@fluff.org>
2011-08-22 12:00:10 +00:00
Jon Medhurst
009426a0eb ARM: omap: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
CC: Tony Lindgren <tony@atomide.com>
2011-08-22 12:00:10 +00:00
Jon Medhurst
99d1717dd7 ARM: Add init_consistent_dma_size()
This function can be called during boot to increase the size of the consistent
DMA region above it's default value of 2MB. It must be called before the memory
allocator is initialised, i.e. before any core_initcall.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-08-22 12:00:10 +00:00
Mark Brown
4df0cb2fa9 ASoC: Clear any outstanding WM8962 FLL lock completions before waiting
Ensure that we don't spuriously trigger early.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:45:11 +01:00
Mark Brown
e6ef58700a ASoC: Report IRQ_NONE when we don't see an interrupt from WM8962
This should never happen with level triggered IRQs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:42:01 +01:00
Mark Brown
6f88a4e578 ASoC: Initial WM8962 DSP2 support
The WM8962 features a DSP providing a number of signal processing
features including HD Bass and Virtual Surround Sound (VSS).  Enable
initial support for this, allowing users to enable and disable the
algorithms using the default coefficient sets.  Further patches will
add support for runtime configuration of the DSP coefficients.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:41:56 +01:00
Mark Brown
f79e7ff852 ASoC: Ensure we only run Speyside WM8962 bias level callbacks once
We get called once per DAPM context but only need to run once. When DAPM
was serialized this was a series of noops but now it can run in parallel
we need to take proper care.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:40:31 +01:00
Mark Brown
1ab63da721 ASoC: Add basic WM8962 capture low/high pass filter control
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:39:53 +01:00
Mark Brown
2fde6e80dd ASoC: Optimise WM8996 no interrupt path
This occurs frequently if we are in edge triggered mode as we must poll the
interrupt status register until we get no more interrupts so it's worth
the effort - it means we skip writing null acknowledgements to the chip.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:37:59 +01:00
Mark Brown
889c85c550 ASoC: Automatically manage WM8996 MICBIAS regulating mode
For non-audio uses like accessory detection we can use a lower quality,
unregulated microphone bias, saving a little power. As the hardware can
manually enable and disable the biases we can select regulating mode
automatically with supply widgets connected to the biases.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:37:27 +01:00
Mark Brown
7691cd74c5 ASoC: Fix configuration of WM8996 input enables
There's no need for separate widgets for the enables (as the map already
shows).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:36:52 +01:00
Mark Brown
4f41adfd8c ASoC: WM8996 record paths need AIFCLK
Make AIFCLK supply the record paths otherwise record will not work unless
there is a simultaneous playback.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 12:36:20 +01:00
Mark Brown
fec4fe26ec Merge branch 'regmap-mfd' into regmap-next 2011-08-22 12:33:11 +01:00
Mark Brown
50eeef5d3c mfd: Convert WM8400 to regmap API
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22 12:32:22 +01:00
Mark Brown
d6c645fc00 mfd: Convert WM8994 to use new register map API
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-22 12:25:15 +01:00
Mark Brown
5570c2f709 mfd: Use device ID matching for WM831x SPI driver
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-22 12:24:19 +01:00
Mark Brown
2e47fff113 mfd: Provide regmap register access info from wm831x driver
Lets us see the register map in debugfs and will enable us to push
access checking down into the regmap API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-22 12:23:48 +01:00
Mark Brown
1df5981b82 mfd: Convert WM831x to use regmap API
Factor out the register read/write code to use the register map API.  We
still need some wm831x specific code and locking in place to check that
the user key is handled correctly but only on the write side, reads are
not affected by the key.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-22 12:23:22 +01:00
Arik Nemtsov
04b4d69c89 wl12xx: fix tx_queue_count spurious increment
Only increment the queue count after actually queuing the skb. This
avoids a spurious increment is case of dropped packets.

Also move the Tx-watermark checking code after the packet is enqueued.
This makes the count more accurate - it includes the just-queued
packet.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:32 +03:00
Arik Nemtsov
04216da393 wl12xx: AP-mode - prevent Tx to stale/invalid stations
Don't pollute the queues with Tx directed to invalid stations. This
can happen during recovery.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:31 +03:00
Arik Nemtsov
cf42039f33 wl12xx: set the AP-started flag only after setting keys
This fix eliminates a potential race between starting the AP role
and setting encryption keys.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:31 +03:00
Arik Nemtsov
9b17f1b371 wl12xx: enable AP advanced functionality
This adjusts FW TX block allocation for connected stations in PS.
Firmware congestion is measured in allocated packets instead of blocks.

Allow a link in PS to queue up to 2 packets to the FW.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:31 +03:00
Eliad Peller
769d7ac62d wl12xx: don't wait for disconnection event
Sometimes the fw doesn't send the DISCONNECT_EVENT_COMPLETE_ID
on station role stop, so don't wait for it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:31 +03:00
Arik Nemtsov
bdf91cfae6 wl12xx: handle wrap-around overflow in released Tx blocks FW counter
When the FW Tx released blocks counter wraps around, we should correct
our calculation of released blocks. Otherwise we add a large negative
figure to our driver freed blocks counter

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:30 +03:00
Arik Nemtsov
742246f8bc wl12xx: schedule TX packets according to FW packet occupancy
When selecting packets for transmission, prefer the ACs that are least
occupied in the FW. When packets for multiple ACs are present in the FW,
it decides which to transmit according to WMM QoS parameters.

With these changes, lower priority ACs should not be starved when higher
priority traffic is present.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:30 +03:00
Arik Nemtsov
bf54e30167 wl12xx: track freed packets in FW by AC
Track the number of freed packets in each AC when receiving an interrupt
from the FW. This paves the way for tracking allocated packets per AC.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:30 +03:00
Eliad Peller
010d3d30a2 wl12xx: don't remove key if hlid was already deleted
When wep key was removed after disconnection, sta_hlid was invalid,
and it resulted in a fw crash.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:30 +03:00
Eliad Peller
7f97b487c4 wl12xx: use ap_bcast_hlid for recorded keys
when the key was recorded, wl->ap_bcast_hlid was invalid
(since the role wasn't started), so when configuring the
key we need to use the current ap_bcast_hlid.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:29 +03:00
Arik Nemtsov
1a8adb67f9 wl12xx: AP-mode - configure HT rate support to the FW
Unconditionally configure HT rate support to the FW on all ACs
when starting the AP.

When 11n support is disabled by usermode (hostapd), each STA joining
the AP will appear as a non-HT STA. This will stop us from accidentally
transmitting using MCS rates.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:29 +03:00
Arik Nemtsov
99d5ad7b9c wl12xx: AP-mode - configure STA HT rates on join
When a new STA joins the BSS, configure the HT rates it supports to the
FW.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22 12:35:29 +03:00