Commit graph

287,753 commits

Author SHA1 Message Date
Johannes Berg
34850ab25d cfg80211: allow userspace to control supported rates in scan
Some P2P scans are not allowed to advertise
11b rates, but that is a rather special case
so instead of having that, allow userspace
to request the rate sets (per band) that are
advertised in scan probe request frames.

Since it's needed in two places now, factor
out some common code parsing a rate array.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:58 -04:00
Rafał Miłecki
0b5dd734d3 b43: HT-PHY: fix masks in radio ctl
Old masks were causing ugly, delayed lock ups.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:57 -04:00
Rafał Miłecki
40c6226967 b43: bcma: read info about supported bands
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:56 -04:00
Rafał Miłecki
124cc11175 b43: bcma: define 80211 core specific IO status bits
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:55 -04:00
Rafał Miłecki
2b5e3322b8 bcma: define IO status register
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:54 -04:00
Kalle Valo
856799d582 ieee80211: add few wmm tspec values
These are needed by ath6kl for parsing tspec status from an IE.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:54 -04:00
Rafał Miłecki
eb1577b7c4 bcma: handle alternative SPROM location
Some cards do not use additional 0x30 offset for SPROM location. We do
not know the real condition for it yet, make it BCM4331 specific for
now.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:53 -04:00
Rafał Miłecki
b473bc1767 b43: HT-PHY: fix typo in 0x2059 radio init
Following operation was incorrectly translated:
 radio_read(0x0011) -> 0xffff
radio_write(0x0011) <- 0xfff7

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:52 -04:00
Rafał Miłecki
49ac26fa5b b43: HT-PHY: find channel entry with regs data
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:51 -04:00
Rafał Miłecki
315a685f26 b43: HT-PHY: switch to channel after enabling radio
Also change the default channel to 11. This is the first channel closed
driver switches to.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:50 -04:00
Rafał Miłecki
3667787410 b43: use agent R/W ops for BCMA_IOCTL
BCMA_IOCTL is register in agent (AKA wrapper) core, we need to use
special R/W ops for it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 15:43:40 -04:00
David Teigland
10d1459faf dlm: don't limit active work items
Allow multiple workqueue items (locks with callbacks) to be
processed concurrently.  There should be no reason not to
take advantage of this workqueue feature.

Signed-off-by: David Teigland <teigland@redhat.com>
2011-07-19 14:22:32 -05:00
Shawn Guo
591567a5ea gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming
The following commit renames irq_gc_ack() to irq_gc_ack_set_bit(),
and makes gpio-mxc and gpio-mxs fail to build.

  659fb32d1b
  genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)

The patch fixed a couple of typo of comma to semicolon.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 13:10:02 -06:00
Alan Stern
e04f5f7e42 EHCI: fix direction handling for interrupt data toggles
This patch (as1480) fixes a rather obscure bug in ehci-hcd.  The
qh_update() routine needs to know the number and direction of the
endpoint corresponding to its QH argument.  The number can be taken
directly from the QH data structure, but the direction isn't stored
there.  The direction is taken instead from the first qTD linked to
the QH.

However, it turns out that for interrupt transfers, qh_update() gets
called before the qTDs are linked to the QH.  As a result, qh_update()
computes a bogus direction value, which messes up the endpoint toggle
handling.  Under the right combination of circumstances this causes
usb_reset_endpoint() not to work correctly, which causes packets to be
dropped and communications to fail.

Now, it's silly for the QH structure not to have direct access to all
the descriptor information for the corresponding endpoint.  Ultimately
it may get a pointer to the usb_host_endpoint structure; for now,
adding a copy of the direction flag solves the immediate problem.

This allows the Spyder2 color-calibration system (a low-speed USB
device that sends all its interrupt data packets with the toggle set
to 0 and hance requires constant use of usb_reset_endpoint) to work
when connected through a high-speed hub.  Thanks to Graeme Gill for
supplying the hardware that allowed me to track down this bug.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Graeme Gill <graeme@argyllcms.com>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-19 11:25:45 -07:00
Sage Weil
38be7a79f7 ceph: fix file mode calculation
open(2) must always include one of O_RDONLY, O_WRONLY, or O_RDWR.  No need
for any O_APPEND special case.

Passing O_WRONLY|O_RDWR is undefined according to the man page, but the
Linux VFS interprets this as O_RDWR, so we'll do the same.

This fixes open(2) with flags O_RDWR|O_APPEND, which was incorrectly being
translated to readonly.

Reported-by: Fyodor Ustinov <ufm@ufm.su>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-19 11:25:04 -07:00
David S. Miller
fd99beb937 Merge branch 'vhost-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 2011-07-19 10:12:44 -07:00
David S. Miller
3fbcf6bb55 Merge branch 'davem-next.r8169' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 2011-07-19 10:11:21 -07:00
Dmitry Kravkov
928ad22a3b bnx2x: disable FCoE for 578xx devices since not yet supported
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:49 -07:00
Vladislav Zolotarov
53e51e2f48 bnx2x: fix memory barriers
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:49 -07:00
Vladislav Zolotarov
f5219d8eb8 bnx2x: use BNX2X_Q_FLG_TPA_IPV6 for TPA queue configuration
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:49 -07:00
Vladislav Zolotarov
019dbb4c01 bnx2x: disable loacal BH when scheduling FCOE napi
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:49 -07:00
Dmitry Kravkov
d1c228d9b9 bnx2x: fix MB index for 4-port devices
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:49 -07:00
Dmitry Kravkov
6debea870a bnx2x: DCB rework
create DCB related states in function state-machine
allow handling of DCB errors from FW
allow disablement of DCB in FW, when peer disappears or error
clean up unused functions/variables as pointed by
David Binderman <dcb314@hotmail.com>

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:48 -07:00
Vladislav Zolotarov
f13ac41f51 bnx2x: remove unnecessary dma_sync
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:48 -07:00
Vladislav Zolotarov
9505ee3767 bnx2x: stop tx before CNIC_STOP
It may take some time to cnic to respond, this prevents tx_timeout
when it happens.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:48 -07:00
Dmitry Kravkov
c636322b24 bnx2x: add missing command in error handling flow
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:47 -07:00
Vladislav Zolotarov
9924cafc40 bnx2x: use correct dma_sync function
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19 09:57:46 -07:00
Arnd Bergmann
c8f85523e7 Merge branch 'cross-platform/clkdev' into next/cross-platform 2011-07-19 18:10:44 +02:00
Kyungmin Park
aa3831cf9d ARM: Consolidate the clkdev header files
Now most of ARM machines has the alsmot same __clk_get/put() macro

So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files

But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config

Now there are only 3 caese.

1) define the clk structure with clkdev macro => Need to move clk structure to proper header file

arch/arm/mach-versatile/include/mach/clkdev.h
arch/arm/mach-realview/include/mach/clkdev.h
arch/arm/mach-vexpress/include/mach/clkdev.h
arch/arm/mach-integrator/include/mach/clkdev.h

2) export the __clk_get/put function at clock.c

arch/arm/mach-shmobile/include/mach/clkdev.h

3) demuxing the clk source
arch/arm/mach-u300/include/mach/clkdev.h

Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-07-19 18:09:45 +02:00
Francois Romieu
1687b56679 r8169: fix sticky accepts packet bits in RxConfig.
e542a2269f (r8169: adjust the RxConfig settings)
broke the return from promiscuous mode to physical address match mode.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2011-07-19 17:28:03 +02:00
Wolfram Sang
09bddc8eb2 ASoC: sgtl5000: guide user when regulator support is needed
Print a hint when the user has a setup where CONFIG_REGULATOR is really
needed to make the driver work.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Dong Aisheng <b29396@freescale.com>
Tested-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-19 16:19:30 +01:00
Wolfram Sang
e94a4062c8 ASoC: sgtl5000: refactor registering internal ldo
The code for registering the internal ldo was present twice. Turn it
into a function instead. Also, inform the user if LDO is used now.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Dong Aisheng <b29396@freescale.com>
Tested-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-19 16:19:22 +01:00
Wolfram Sang
1c8371d61e ASoC: core: make comments fit the code
In one comment, cpu_dai was mentioned although codec_dai was used in the
code. Also, fix the name for the card dai list which has no seperation
into card_dai and codec_dai.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-19 16:19:15 +01:00
Mark Brown
7be4ba24a3 ASoC: Mark cache as dirty when suspending
Since quite a few drivers are not managing to flag the cache as needing
to be resynced after suspend and it's a reasonable thing to do flag the
cache as needing sync automatically when suspending.

The expectation is that systems will mainly only keep the CODEC powered
when doing audio through the CODEC so we won't actually suspend the
device anyway; drivers which want to can override this behaviour when
they resume.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org
2011-07-19 16:16:00 +01:00
Linus Walleij
7f294e4983 ARM: 6981/2: mmci: adjust calculation of f_min
The ARM version maximum clock divider is 512 whereas for the ST
variants it's 257. Let's use DIV_ROUND_UP() for both cases so we
can see clearly what's going on here.

[Use DIV_ROUND_UP to clarify elder code]

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19 16:04:35 +01:00
Michael S. Tsirkin
b834226b04 vhost: optimize interrupt enable/disable
As we now only update used ring after enabling
the backend, we can write flags with __put_user:
as that's done on data path, it matters.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19 17:17:28 +03:00
Stephen Warren
29e9c68abe ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461
Bus number 4 doesn't exist in the mainline kernel. The device is
attached to bus number 3. (In the ChromeOS kernel, one of the I2C
busses is split in two with a mux, this pushing all later busses
to a higher bus number. In this case, 4 is the correct bus number
for the ADT7461).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-19 15:27:36 +02:00
Stephen Warren
3a2eef8eeb ARM: Tegra: Trimslice: Tri-state DAP3 pinmux
DAP3 is used for a bunch of GPIOs. Not tri-stating the pins means audio
signals get sent out there, and this ends up resetting USB and breaking
SDHCI too.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-19 15:27:27 +02:00
Wolfgang Denk
026dfaf189 USB: serial: add IDs for WinChipHead USB->RS232 adapter
Add ID 4348:5523 for WinChipHead USB->RS 232 adapter with
Prolifec PL2303 chipset

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-19 04:48:45 -07:00
Catalin Marinas
140d5dc1d7 ARM: 7000/1: LPAE: Use long long printk format for displaying the pud
Currently using just long but this is not enough for the LPAE format
(64-bit entries).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19 12:01:27 +01:00
Dave Martin
540b573875 ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state
Currently, the documented kernel entry requirements are not
explicit about whether the kernel should be entered in ARM or
Thumb, leading to an ambiguitity about how to enter Thumb-2
kernels.  As a result, the kernel is reliant on the zImage
decompressor to enter the kernel proper in the correct instruction
set state.

This patch changes the boot entry protocol for head.S and Image to
be the same as for zImage: in all cases, the kernel is now entered
in ARM.

Documentation/arm/Booting is updated to reflect this new policy.

A different rule will be needed for Cortex-M class CPUs as and when
support for those lands in mainline, since these CPUs don't support
the ARM instruction set at all: a note is added to the effect that
the kernel must be entered in Thumb on such systems.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19 12:00:53 +01:00
Russell King
4348810a24 ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence
Kernel space needs very little in the way of BTC maintanence as most
mappings which are created and destroyed are non-executable, and so
could never enter the instruction stream.

The case which does warrant BTC maintanence is when a module is loaded.
This creates a new executable mapping, but at that point the pages have
not been initialized with code and data, so at that point they contain
unpredictable information.  Invalidating the BTC at this stage serves
little useful purpose.

Before we execute module code, we call flush_icache_range(), which deals
with the BTC maintanence requirements.  This ensures that we have a BTC
maintanence operation before we execute code via the newly created
mapping.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19 11:44:06 +01:00
Michael S. Tsirkin
75fd9edc10 vhost: fix zcopy reference counting
Fix get/put refcount imbalance with zero copy,
which caused qemu to hang forever on guest driver unload.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19 13:28:34 +03:00
Jason Wang
2723feaa8e vhost: set log when updating used flags or avail event
We need to log writes when updating used flags and avail event
fields.  Otherwise the guest may see a stale value after migration and
miss notifying the host.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19 13:28:34 +03:00
Jason Wang
f59281dafb vhost: init used ring after backend was set
Move the used ring initialization after backend was set. This
makes it possible to disable the backend and tweak the used ring,
then restart. This will also make it possible to log the used ring
write correctly.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19 13:28:34 +03:00
Florian Westphal
97d32cf944 netfilter: nfnetlink_queue: batch verdict support
Introduces a new nfnetlink type that applies a given
verdict to all queued packets with an id <= the id in the verdict
message.

If a mark is provided it is applied to all matched packets.

This reduces the number of verdicts that have to be sent.
Applications that make use of this feature need to maintain
a timeout to send a batchverdict periodically to avoid starvation.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-07-19 11:46:33 +02:00
Eric Dumazet
5863702a34 netfilter: nfnetlink_queue: assert monotonic packet ids
Packet identifier is currently setup in nfqnl_build_packet_message(),
using one atomic_inc_return().

Problem is that since several cpus might concurrently call
nfqnl_enqueue_packet() for the same queue, we can deliver packets to
consumer in non monotonic way (packet N+1 being delivered after packet
N)

This patch moves the packet id setup from nfqnl_build_packet_message()
to nfqnl_enqueue_packet() to guarantee correct delivery order.

This also removes one atomic operation.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Florian Westphal <fw@strlen.de>
CC: Pablo Neira Ayuso <pablo@netfilter.org>
CC: Eric Leblond <eric@regit.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-07-19 11:44:17 +02:00
Jon Povey
9daedd833a davinci: DM365 EVM: fix video input mux bits
Video input mux settings for tvp7002 and imager inputs were swapped.
Comment was correct.

Tested on EVM with tvp7002 input.

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Cc: stable@kernel.org
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-19 14:00:29 +05:30
Takashi Iwai
737c265bb8 ALSA: hda - Add documentation for codec-specific mixer controls
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-19 09:34:10 +02:00
Todd Poynor
33e1e5e317 ARM: davinci: Check for NULL return from irq_alloc_generic_chip
Avoid NULL dereference of irq_alloc_generic_chip return in low
memory conditions.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-19 12:49:00 +05:30