Commit graph

287,753 commits

Author SHA1 Message Date
Dan Carpenter
a5e5aa6cee mwifiex: restore handling of NULL parameters
Prior to a5ffddb70c "mwifiex: remove casts of void pointers" the
code assumed that the data_buf parameter could be a NULL pointer.
The patch preserved some NULL checks but not consistently, so there
was a potential for NULL dereferences and it changed the behavior.
This patch restores the original behavior.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:42 -04:00
Rajkumar Manoharan
f6b4e4d476 ath9k: Fix locking issue during tx completion
The received tx status of aggregated frame without BlockAck may
cause deaf state in AR5416 cards. So the driver does a reset to
recover. When this happens, we release the pcu_lock before doing
a reset as ath_rest acquires pcu_lock. This is ugly and also not
atomic. Fixing this addresses the TX DMA failure also.

ath_tx_complete_aggr can be called from different paths which
takes different variants of spin_lock. This patch also addresses
the following warning.

WARNING: at kernel/timer.c:1011 del_timer_sync+0x4e/0x50()
Call Trace:
 <IRQ>  [<ffffffff8104be3a>] warn_slowpath_common+0x7a/0xb0
 [<ffffffff8104be85>] warn_slowpath_null+0x15/0x20
 [<ffffffff8105915e>] del_timer_sync+0x4e/0x50
 [<ffffffffa03726be>] ath_reset+0x3e/0x210 [ath9k]
 [<ffffffff8135cdaf>] ? _raw_spin_unlock_bh+0x1f/0x30
 [<ffffffffa037760a>] ath_tx_complete_aggr.isra.26+0x54a/0xa40 [ath9k]

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:42 -04:00
Stanislaw Gruszka
428bc8c396 iwlagn: fix rmmod crash
priv->bus.bus_specific pointer is used after priv structures was freed,
in iwl_pci_remove(), what make ugly rmmod crash. This bug was introduced
by current pci changes.

On the way remove fake check, if prober error code is returned from
.probe() function, .remove() will never be called be null drvdata.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:42 -04:00
Joe Perches
1d616b14cf rt2x00: Fix unspeficied typo
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:41 -04:00
Paul Stewart
a806c558e0 mac80211: Drop DS Channel PARAM in directed probe
Do not send DS Channel parameter for directed probe requests
in order to maximize the chance that we get a response.  Some
badly-behaved APs don't respond when this parameter is included.

Signed-off-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:41 -04:00
Sergei Shtylyov
ce2dd3c2d5 ssb: use pci_dev->revision
The bus scan code reads PCI revision ID from the PCI configuration register
while it's already stored by PCI subsystem in the 'revision' field of 'struct
pci_dev'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:40 -04:00
Mohammed Shafi Shajakhan
05b60d4e37 ath9k_hw: make use of the gain_table_entry macro
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:40 -04:00
Mohammed Shafi Shajakhan
f68e20f0f8 ath9k_hw: Add carrier leak correction in desired gain calculation
Cc: muddin@qca.qualcomm.com
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:40 -04:00
Rajkumar Manoharan
dcfcbd590d ath9k_hw: Fix false tx hung detection in AR9003 chips
The edma based (AR9003 family) chips update tx status
descriptors in a common ring buffer for all transmitted
frames. Whenever tx interrupt is raised, the descriptors
are processed and tx status index is moved.

The complete tx stauts ring are updated with beacons tx status
when there are no data frames to be sent for a period of time.
In this state, transmitting data frames causes the driver to
wait for the tx status on an incorrect tx status index though
the status was updated by hw properly. The driver detects this
condition as a h/w hang and does unnecessary chip resets.

This issue was orginally reported in adhoc mode while sending
frames after an idle time.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:40 -04:00
Arik Nemtsov
15b4d843ab mac80211: reestablish mis-configured existing Rx BA sessions
When forming a Rx BA session, sometimes the ADDBA response gets lost.
This leads to a situation where the session is configured locally, but
doesn't exist on the remote side. Subsequent ADDBA requests are declined
by mac80211.

Fix this by assuming the session state of the initiator is the correct
one. When receiving an unexpected ADDBA request on a TID with an active
Rx BA session, delete the existing one and establish a new session.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:40 -04:00
Randy Dunlap
daf4ce85cd bluetooth: uses crypto interfaces, select CRYPTO
Recent changes to hci_core.c use crypto interfaces, so select CRYPTO
to make sure that those interfaces are present.

Fixes these build errors when CRYPTO is not enabled:

net/built-in.o: In function `hci_register_dev':
(.text+0x4cf86): undefined reference to `crypto_alloc_base'
net/built-in.o: In function `hci_unregister_dev':
(.text+0x4f912): undefined reference to `crypto_destroy_tfm'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:39 -04:00
Johannes Berg
8ee3108075 mac80211: restrict advertised HW scan rates
Advertise only user-requested bitrates in a HW scan.
Note that the hw_scan API doesn't currently have a
way of asking for a specific probe request bitrate,
so we might end up using a bitrate that we don't
advertise as supported. I'll fix that later.

Also add a hexdump printk to hwsim to verify this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:39 -04:00
Johannes Berg
04b7dcf979 wireless: unify QoS control field definitions
Move all that mac80211 has into the generic
ieee80211.h header file and use them. At the
same time move them from mask+shift to just
bits and rename them for consistent names.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:39 -04:00
Hauke Mehrtens
e913d46830 ssb: fix ssb clock rate according to broadcom source
This fix was done according to si_clock_rate function in broadcom siutils.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:39 -04:00
Chaoming Li
f9fc51365d rtlwifi: rtl8192de: Modify Kconfig and Makefile routines for new driver
Set up Kconfig and Makefile for new driver for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:38 -04:00
Larry Finger
f34317db36 rtlwifi: Fix build problems introduced by merging rtl8192de
These patches allow compilation of rtlwifi, rtl8192c_common,
rtl8192ce, rtl8192cu and rtl8192se to compile after rtl8192de
was added.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:38 -04:00
Chaoming Li
674f0523ec rtlwifi: rtl8192de: Merge TX and RX routines
Merge routines trx.c and trx.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:38 -04:00
Chaoming Li
e501016884 rtlwifi: rtl8192de: Merge table routines
Merge routines table.c and table.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:38 -04:00
Chaoming Li
a7dbd3b50d rtlwifi: rtl8192de: Merge main (sw) routines
Merge routines sw.c and sw.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:38 -04:00
Chaoming Li
f219eff1e5 rtlwifi: rtl8192de: Merge rf routines
Merge routines rf.c and rf.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:38 -04:00
Chaoming Li
3de1ef7304 rtlwifi: rtl8192de: Merge register definitions
Merge routines reg.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:38 -04:00
Chaoming Li
7274a8c229 rtlwifi: rtl8192de: Merge phy routines
Merge routines phy.c and phy.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:37 -04:00
Chaoming Li
f53d5a7006 rtlwifi: rtl8192de: Merge led routines
Merge routines led.c and led.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:37 -04:00
Chaoming Li
3affdf4237 rtlwifi: rtl8192de: Merge hardware routines
Merge routines hw.c and hw.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:37 -04:00
Chaoming Li
985d4d3f6d rtlwifi: rtl8192de: Merge firmware routines
Merge routines fw.c and fw.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:37 -04:00
Chaoming Li
4f01358e5b rtlwifi: rtl8192de: Merge dynamic management routines
Merge routines dm.c and dm.h for RTL8192DE.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:37 -04:00
Chaoming Li
23a8c61416 rtlwifi: rtl8192de: Merge def.h
Introduce routine def.h for rtl8192de.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:37 -04:00
John W. Linville
be8943a445 Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6 2011-06-27 15:03:40 -04:00
Arik Nemtsov
a66b98db57 mac80211: fix rx->key NULL dereference during mic failure
Sometimes when reporting a MIC failure rx->key may be unset. This
code path is hit when receiving a packet meant for a multicast
address, and decryption is performed in HW.

Fortunately, the failing key_idx is not used for anything up to
(and including) usermode, so we allow ourselves to drop it on the
way up when a key cannot be retrieved.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 14:45:25 -04:00
Evgeni Golov
8fcbd4dc7a iwlagn: fix *_UCODE_API_MAX output in the firmware field
Currently (3.0-rc2), modinfo iwlagn shows:
    firmware:       iwlwifi-5150-IWL5150_UCODE_API_MAX.ucode
    firmware:       iwlwifi-5000-IWL5000_UCODE_API_MAX.ucode
    firmware:       iwlwifi-6000g2b-IWL6000G2_UCODE_API_MAX.ucode
    firmware:       iwlwifi-6000g2a-IWL6000G2_UCODE_API_MAX.ucode
    firmware:       iwlwifi-6050-IWL6050_UCODE_API_MAX.ucode
    firmware:       iwlwifi-6000-IWL6000_UCODE_API_MAX.ucode
    firmware:       iwlwifi-100-IWL100_UCODE_API_MAX.ucode
    firmware:       iwlwifi-1000-IWL1000_UCODE_API_MAX.ucode
    firmware:       iwlwifi-105-IWL105_UCODE_API_MAX.ucode
    firmware:       iwlwifi-2030-IWL2030_UCODE_API_MAX.ucode
    firmware:       iwlwifi-2000-IWL2000_UCODE_API_MAX.ucode

which is obviously wrong, the user should not see the *_UCODE_API_MAX
macros but the actual ucode API versions here.

The problem are the
    #define *_MODULE_FIRMWARE(api) *_FW_PRE #api ".ucode"
which do not expand api correctly (because this is a macro itself).

Fixed by using __stringify() from linux/stringify.h.

Further information about macro stringification can be found here:
    http://gcc.gnu.org/onlinedocs/cpp/Stringification.html

Signed-off-by: Evgeni Golov <sargentd@die-welt.net>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 14:33:14 -04:00
Oleg Nesterov
479bf98c1c ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
wait_consider_task() checks same_thread_group(parent, real_parent),
this is the open-coded ptrace_reparented().

__ptrace_detach() remains the only function which has to check this by
hand, although we could reorganize the code to delay __ptrace_unlink.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:11 +02:00
Oleg Nesterov
bb3696da89 ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
Kill real_parent_is_ptracer() and update the callers to use
ptrace_reparented(), after the previous patch they do the same.

Remove the unnecessary ->ptrace != 0 check in get_signal_to_deliver(),
if ptrace_reparented() == T then the task must be ptraced.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:10 +02:00
Oleg Nesterov
0347e17739 ptrace: ptrace_reparented() should check same_thread_group()
ptrace_reparented() naively does parent != real_parent, this means
it returns true even if the tracer _is_ the real parent. This is per
process thing, not per-thread. The only reason ->real_parent can
point to the non-leader thread is that we have __WNOTHREAD.

Change it to check !same_thread_group(parent, real_parent).

It has two callers, and in both cases the current check does not
look right.

exit_notify: we should respect ->exit_signal if the exiting leader
is traced by any thread from the parent thread group. It is the
child of the whole group, and we are going to send the signal to
the whole group.

wait_task_zombie: without __WNOTHREAD do_wait() should do the same
for any thread, only sys_ptrace() is "bound" to the single thread.
However do_wait(WEXITED) succeeds but does not release a traced
natural child unless the caller is the tracer.

Test-case:

	void *tfunc(void *arg)
	{
		assert(ptrace(PTRACE_ATTACH, (long)arg, 0,0) == 0);
		pause();
		return NULL;
	}

	int main(void)
	{
		pthread_t thr;
		pid_t pid, stat, ret;

		pid = fork();
		if (!pid) {
			pause();
			assert(0);
		}

		assert(pthread_create(&thr, NULL, tfunc, (void*)(long)pid) == 0);

		assert(waitpid(-1, &stat, 0) == pid);
		assert(WIFSTOPPED(stat));

		kill(pid, SIGKILL);

		assert(waitpid(-1, &stat, 0) == pid);
		assert(WIFSIGNALED(stat) && WTERMSIG(stat) == SIGKILL);

		ret = waitpid(pid, &stat, 0);
		if (ret < 0)
			return 0;

		printf("WTF? %d is dead, but: wait=%d stat=%x\n",
				pid, ret, stat);

		return 1;
	}

Note that the main thread simply does

	pid = fork();
	kill(pid, SIGKILL);

and then without the patch wait4(WEXITED) succeeds twice and reports
WTERMSIG(stat) == SIGKILL.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:10 +02:00
Oleg Nesterov
087806b128 redefine thread_group_leader() as exit_signal >= 0
Change de_thread() to set old_leader->exit_signal = -1. This is
good for the consistency, it is no longer the leader and all
sub-threads have exit_signal = -1 set by copy_process(CLONE_THREAD).

And this allows us to micro-optimize thread_group_leader(), it can
simply check exit_signal >= 0. This also makes sense because we
should move ->group_leader from task_struct to signal_struct.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:10 +02:00
Oleg Nesterov
d4f7c511c1 do not change dead_task->exit_signal
__ptrace_detach() and do_notify_parent() set task->exit_signal = -1
to mark the task dead. This is no longer needed, nobody checks
exit_signal to detect the EXIT_DEAD task.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:10 +02:00
Oleg Nesterov
e550f14dc6 kill task_detached()
Upadate the last user of task_detached(), wait_task_zombie(), to
use thread_group_leader() and kill task_detached().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:09 +02:00
Oleg Nesterov
0976a03e5c reparent_leader: check EXIT_DEAD instead of task_detached()
Change reparent_leader() to check ->exit_state instead of ->exit_signal,
this matches the similar EXIT_DEAD check in wait_consider_task() and
allows us to cleanup the do_notify_parent/task_detached logic.

task_detached() was really needed during reparenting before 9cd80bbb
"do_wait() optimization: do not place sub-threads on ->children list"
to filter out the sub-threads. After this change task_detached(p) can
only be true if p is the dead group_leader and its parent ignores
SIGCHLD, in this case the caller of do_notify_parent() is going to
reap this task and it should set EXIT_DEAD.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:09 +02:00
Oleg Nesterov
8677347378 make do_notify_parent() __must_check, update the callers
Change other callers of do_notify_parent() to check the value it
returns, this makes the subsequent task_detached() unnecessary.
Mark do_notify_parent() as __must_check.

Use thread_group_leader() instead of !task_detached() to check
if we need to notify the real parent in wait_task_zombie().

Remove the stale comment in release_task(). "just for sanity" is
no longer true, we have to set EXIT_DEAD to avoid the races with
do_wait().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:09 +02:00
Oleg Nesterov
9843a1e977 __ptrace_detach: avoid task_detached(), check do_notify_parent()
__ptrace_detach() relies on the current obscure behaviour of
do_notify_parent(tsk) which changes tsk->exit_signal if this child
should be silently reaped. That is why we check task_detached(), it
is true if the task is sub-thread, or it is the group_leader but
its exit_signal was changed by do_notify_parent().

This is confusing, change the code to rely on !thread_group_leader()
or the value returned by do_notify_parent().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:08 +02:00
Oleg Nesterov
45cdf5cc07 kill tracehook_notify_death()
Kill tracehook_notify_death(), reimplement the logic in its caller,
exit_notify().

Also, change the exec_id's check to use thread_group_leader() instead
of task_detached(), this is more clear. This logic only applies to
the exiting leader, a sub-thread must never change its exit_signal.

Note: when the traced group leader exits the exit_signal-or-SIGCHLD
logic looks really strange:

	- we notify the tracer even if !thread_group_empty() but
	   do_wait(WEXITED) can't work until all threads exit

	- if the tracer is real_parent, it is not clear why can't
	  we use ->exit_signal event if !thread_group_empty()

-v2: do not try to fix the 2nd oddity to avoid the subtle behavior
     change mixed with reorganization, suggested by Tejun.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:08 +02:00
Oleg Nesterov
53c8f9f199 make do_notify_parent() return bool
- change do_notify_parent() to return a boolean, true if the task should
  be reaped because its parent ignores SIGCHLD.

- update the only caller which checks the returned value, exit_notify().

This temporary uglifies exit_notify() even more, will be cleanuped by
the next change.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:08 +02:00
John W. Linville
ed9ed3b82b Merge branch 'wireless-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6 2011-06-27 14:26:04 -04:00
Randy Dunlap
9a7b150118 Bluetooth: uses crypto interfaces, select CRYPTO
Recent changes to hci_core.c use crypto interfaces, so select CRYPTO
to make sure that those interfaces are present.

Fixes these build errors when CRYPTO is not enabled:

net/built-in.o: In function `hci_register_dev':
(.text+0x4cf86): undefined reference to `crypto_alloc_base'
net/built-in.o: In function `hci_unregister_dev':
(.text+0x4f912): undefined reference to `crypto_destroy_tfm'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-27 15:12:42 -03:00
Linus Walleij
fc5070b527 mach-ux500: fix USB build error
The mach-ux500/usb.c was referencing DMA macros, but not
including <linux/dma-mapping.h> so it didn't compile. Fixed by
a proper #include.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-06-27 19:45:40 +02:00
Sanjeev Premi
ec3cdb5bae OMAP2+: PM: fix section mismatch in pm_dbg_init()
Fix the section mismatch warning:

  WARNING: vmlinux.o(.text+0x21118): Section mismatch
  in reference from the function pm_dbg_init() to the
  function .init.text:pwrdms_setup()
  The function pm_dbg_init() references
  the function __init pwrdms_setup().
  This is often because pm_dbg_init lacks a __init
  annotation or the annotation of pwrdms_setup is wrong.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-27 09:53:14 -07:00
Kevin Hilman
59bec58373 OMAP3: PM debug: remove register dumping
Remove OMAP3-specific register dumping feature from PM debug layer.
This is removed because:

- it's ugly
- it's OMAP3-specific, and will obviously not scale to OMAP4+
- userspace /dev/mem-based tools (like omapconf) can do this much better

Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-27 09:53:09 -07:00
Tao Ma
d3ad8434aa jbd2: use WRITE_SYNC in journal checkpoint
In journal checkpoint, we write the buffer and wait for its finish.
But in cfq, the async queue has a very low priority, and in our test,
if there are too many sync queues and every queue is filled up with
requests, the write request will be delayed for quite a long time and
all the tasks which are waiting for journal space will end with errors like:

INFO: task attr_set:3816 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
attr_set      D ffff880028393480     0  3816      1 0x00000000
 ffff8802073fbae8 0000000000000086 ffff8802140847c8 ffff8800283934e8
 ffff8802073fb9d8 ffffffff8103e456 ffff8802140847b8 ffff8801ed728080
 ffff8801db4bc080 ffff8801ed728450 ffff880028393480 0000000000000002
Call Trace:
 [<ffffffff8103e456>] ? __dequeue_entity+0x33/0x38
 [<ffffffff8103caad>] ? need_resched+0x23/0x2d
 [<ffffffff814006a6>] ? thread_return+0xa2/0xbc
 [<ffffffffa01f6224>] ? jbd2_journal_dirty_metadata+0x116/0x126 [jbd2]
 [<ffffffffa01f6224>] ? jbd2_journal_dirty_metadata+0x116/0x126 [jbd2]
 [<ffffffff81400d31>] __mutex_lock_common+0x14e/0x1a9
 [<ffffffffa021dbfb>] ? brelse+0x13/0x15 [ext4]
 [<ffffffff81400ddb>] __mutex_lock_slowpath+0x19/0x1b
 [<ffffffff81400b2d>] mutex_lock+0x1b/0x32
 [<ffffffffa01f927b>] __jbd2_journal_insert_checkpoint+0xe3/0x20c [jbd2]
 [<ffffffffa01f547b>] start_this_handle+0x438/0x527 [jbd2]
 [<ffffffff8106f491>] ? autoremove_wake_function+0x0/0x3e
 [<ffffffffa01f560b>] jbd2_journal_start+0xa1/0xcc [jbd2]
 [<ffffffffa02353be>] ext4_journal_start_sb+0x57/0x81 [ext4]
 [<ffffffffa024a314>] ext4_xattr_set+0x6c/0xe3 [ext4]
 [<ffffffffa024aaff>] ext4_xattr_user_set+0x42/0x4b [ext4]
 [<ffffffff81145adb>] generic_setxattr+0x6b/0x76
 [<ffffffff81146ac0>] __vfs_setxattr_noperm+0x47/0xc0
 [<ffffffff81146bb8>] vfs_setxattr+0x7f/0x9a
 [<ffffffff81146c88>] setxattr+0xb5/0xe8
 [<ffffffff81137467>] ? do_filp_open+0x571/0xa6e
 [<ffffffff81146d26>] sys_fsetxattr+0x6b/0x91
 [<ffffffff81002d32>] system_call_fastpath+0x16/0x1b

So this patch tries to use WRITE_SYNC in __flush_batch so that the request will
be moved into sync queue and handled by cfq timely. We also use the new plug,
sot that all the WRITE_SYNC requests can be given as a whole when we unplug it.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Reported-by: Robin Dong <sanbai@taobao.com>
2011-06-27 12:36:29 -04:00
Linus Torvalds
4699d4423c Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: prevent bogus assert when trying to remove non-existent attribute
  xfs: clear XFS_IDIRTY_RELEASE on truncate down
  xfs: reset inode per-lifetime state when recycling it
2011-06-27 09:01:29 -07:00
Linus Torvalds
375ac3e096 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-multitouch: add support for a new Lumio dual-touch panel
  HID: hid-multitouch: correct VID for Stantum panels
  HID: hid-multitouch: ensure slots are initialized
2011-06-27 09:00:50 -07:00
Linus Torvalds
edcda26522 Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: pm: ensure ARMv7 CPUs save and restore the TLS register
  ARM: pm: proc-v7: fix missing struct processor pointers for suspend code
  ARM: 6969/1: plat-iop: fix build error
  ARM: 6961/1: zImage: Add build-time check for correctly-sized proc_type entries
  ARM: SMP: wait for CPU to be marked active
  ARM: 6963/1: Thumb-2: Relax relocation requirements for non-function symbols
  ARM: 6962/1: mach-h720x: fix build error
  ARM: 6959/1: SMP build fix for entry-macro-multi.S
2011-06-27 08:58:23 -07:00