Commit graph

360,736 commits

Author SHA1 Message Date
Inki Dae
1daa892c1d drm/exynos: make sure that overlay data are updated
Changelog v2:
fix a little bit performance issue to previous patch.
- When drm framebuffer is destroyed, make sure that overlay
  data are updated to real hardwrae for all encoders
  instead of waiting for vblank every page flip request.
  For this, it adds a new function,
  exynos_drm_encoder_complete_scanout function.

Changelog v1:
This patch removes wait_for_vblank call from
exynos_drm_encoder_plane_disable function and move it to
exynos_drm_encoder_plane_commit function.

Disabling dma channel to each plane doens't need vblank
signal to update data to real hardware. But updating
overlay data to real hardware does need vblank signal.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-05 14:39:19 +09:00
David Howells
f3537f91f9 ASN.1: Fix an indefinite length skip error
Fix an error in asn1_find_indefinite_length() whereby small definite length
elements of size 0x7f are incorrecly classified as non-small.  Without this
fix, an error will be given as the length of the length will be perceived as
being very much greater than the maximum supported size.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-12-05 11:27:39 +10:30
David Howells
12e130b045 MODSIGN: Don't use enum-type bitfields in module signature info block
Don't use enum-type bitfields in the module signature info block as we can't be
certain how the compiler will handle them.  As I understand it, it is arch
dependent, and it is possible for the compiler to rearrange them based on
endianness and to insert a byte of padding to pad the three enums out to four
bytes.

Instead use u8 fields for these, which the compiler should emit in the right
order without padding.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-12-05 11:27:24 +10:30
Greg Ungerer
280ef31a00 m68knommu: modify clock code so it can be used by all ColdFire CPU types
The existing clk.c code for ColdFire CPUs has one set of functions to
support those CPU types that have selectable clocks (those with a PPMCR
register), and a duplicate simpler set for those with static clocks.

Modify the clk.c code so there is just one set of support functions. All
CPU types now define a list of clocks (in "struct clk"s), so we only need
a single set of clock functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:35 +10:00
Greg Ungerer
98122d7329 m68knommu: add clock definitions for 54xx ColdFire CPU types
Add a base set of clocks for the 54xx ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:35 +10:00
Greg Ungerer
50564ec536 m68knommu: add clock definitions for 5407 ColdFire CPU types
Add a base set of clocks for the 5407 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:33 +10:00
Greg Ungerer
91ca1bbd9a m68knommu: add clock definitions for 5307 ColdFire CPU types
Add a base set of clocks for the 5307 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:32 +10:00
Greg Ungerer
87f3776953 m68knommu: add clock definitions for 528x ColdFire CPU types
Add a base set of clocks for the 528x ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:31 +10:00
Greg Ungerer
a3d8eb0da2 m68knommu: add clock definitions for 527x ColdFire CPU types
Add a base set of clocks for the 527x ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:30 +10:00
Greg Ungerer
7acef7a2b8 m68knommu: add clock definitions for 5272 ColdFire CPU types
Add a base set of clocks for the 5272 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:29 +10:00
Greg Ungerer
5847c478ed m68knommu: add clock definitions for 525x ColdFire CPU types
Add a base set of clocks for the 525x ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:28 +10:00
Greg Ungerer
ee1e6b3277 m68knommu: add clock definitions for 5249 ColdFire CPU types
Add a base set of clocks for the 5249 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:27 +10:00
Greg Ungerer
a0f8f8c8a1 m68knommu: add clock definitions for 523x ColdFire CPU types
Add a base set of clocks for the 523x ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:26 +10:00
Greg Ungerer
e2d3416461 m68knommu: add clock definitions for 5206 ColdFire CPU types
Add a base set of clocks for the 5206 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:25 +10:00
Greg Ungerer
610ac9381e m68knommu: add clock creation support macro for other ColdFire CPUs
The clock support code for ColdFire CPUs currently supports those that
have the clock control register PPMCR. Expose the struct clk for all CPU
types and add a definition for all other ColdFire CPU types.

With this we will be able to define simple clock trees for all ColdFire
CPU types, even though they will not be able to be enabled or disabled.
They will be able to report the clock rate.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:24 +10:00
Greg Ungerer
423c01eac3 m68k: fix unused variable warning in mempcy.c
When compiling for original 68000 or ColdFire targets you will get the
following warning when compiling arch/m68k/lib/memcpy.c:

  CC      arch/m68k/lib/memcpy.o
arch/m68k/lib/memcpy.c: In function ‘__builtin_memcpy’:
arch/m68k/lib/memcpy.c:13:15: warning: unused variable ‘temp1’

This is easily fixed by moving the definition of temp1 into the code block
where it is used.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:23 +10:00
Greg Ungerer
3c46041769 m68knommu: make non-MMU page_to_virt() return a void *
The page_to_virt() macro for m68knommu is currently effectively returning
an int type. But the equivilent m68k macro returns a void * virtual address.
Modify the non-MMU macro to return a void * as well (using the __va macro).

This change will remove compiler warnings in common m68k code that use this
macro.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:22 +10:00
Greg Ungerer
5a4acf3eac m68knommu: merge ColdFire 5249 and 525x definitions
The ColdFire 5249 and 525x family of SoCs are very similar. Most of the
internals are the same, and are mapped the same. We can use a single set of
peripheral definitions for all of them.

So merge the current m5249sim.h and m525xsim.h definitions into a single
file. The 5249 is now obsolete, and the 525x parts are current, so I have
chosen to move everything into the existing m525xsim.h file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:21 +10:00
Luis Alves
9da1a84a91 m68knommu: disable MC68000 cpu target when MMU is selected
As pointed out by Geert, MC68000 target needs to be disabled when
MMU support is enabled.

From Geert:

This needs a "depends on !MMU".
Else allmodconfig will select it, causing -m68000 to be passed to the assembler,
which may break the build depending on your version of binutils, a.o.

arch/m68k/kernel/entry.S:186: Error: invalid instruction for this
architecture; needs 68020 or higher (68020 [68k, 68ec020], 68030
[68ec030], 68040 [68ec040], 68060 [68ec060]) -- statement `bfextu
%sp@(50){#0,#4},%d0' ignored
arch/m68k/kernel/entry.S:211: Error: invalid operand mode for this
architecture; needs 68020 or higher -- statement `jbsr
@(sys_call_table,%d0:l:4)@(0)' ignored

Cfr. http://kisskb.ellerman.id.au/kisskb/buildresult/7416877/

Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:20 +10:00
Luis Alves
4674e8d385 m68knommu: allow for configuration of true 68000 based systems
Allow the M68000 option to be user configurable, for systems based on
the original stand alone 68000 CPU.

Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:49:50 +10:00
Luis Alves
99e083747d m68knommu: platform code merge for 68000 core cpus
This patch merges all 68000 core cpus into one directory.
There is a lot of common code in the 68328, 68EZ328 and 68VZ328 directories.

This will also facilitate easy development of support for original stand
alone MC68000 CPU machines.

Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:48:47 +10:00
Bjorn Helgaas
edb1daab8e Merge branch 'pci/huang-d3cold-fixes' into next
* pci/huang-d3cold-fixes:
  PCI/PM: Keep runtime PM enabled for unbound PCI devices
2012-12-04 16:13:03 -07:00
Huang Ying
967577b062 PCI/PM: Keep runtime PM enabled for unbound PCI devices
For unbound PCI devices, what we need is:

 - Always in D0 state, because some devices do not work again after
   being put into D3 by the PCI bus.

 - In SUSPENDED state if allowed, so that the parent devices can still
   be put into low power state.

To satisfy these requirements, the runtime PM for the unbound PCI
devices are disabled and set to SUSPENDED state.  One issue of this
solution is that the PCI devices will be put into SUSPENDED state even
if the SUSPENDED state is forbidden via the sysfs interface
(.../power/control) of the device.  This is not an issue for most
devices, because most PCI devices are not used at all if unbound.
But there are exceptions.  For example, unbound VGA card can be used
for display, but suspending its parents makes it stop working.

To fix the issue, we keep the runtime PM enabled when the PCI devices
are unbound.  But the runtime PM callbacks will do nothing if the PCI
devices are unbound.  This way, we can put the PCI devices into
SUSPENDED state without putting the PCI devices into D3 state.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48201
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org          # v3.6+
2012-12-04 16:04:09 -07:00
Zhang Rui
129ff8f8d5 ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000
Or else the laptop will boot with a dimmed screen.

References: https://bugzilla.kernel.org/show_bug.cgi?id=51141
Tested-by: Stefan Nagy <public@stefan-nagy.at>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-04 23:30:19 +01:00
Zhang Rui
b7e383046c ACPI : do not use Lid and Sleep button for S5 wakeup
When system enters power off, the _PSW of Lid device is enabled.
But this may cause the system to reboot instead of power off.

A proper way to fix this is to always disable lid wakeup capability for S5.

References: https://bugzilla.kernel.org/show_bug.cgi?id=35262
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-04 23:23:16 +01:00
Chris Wilson
8c919b2893 drm/i915: Clear the existing watermarks for g4x when modifying the cursor sr
In a couple of places we attempt to adjust the existing watermark
registers to update them for the new cursor watermarks. This goes
horribly wrong as instead of clearing the cursor bits prior to or'ing in
the new values, we clear the rest of the register with the result that
the watermark registers contain bogus values.

References: https://bugs.freedesktop.org/show_bug.cgi?id=47034
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-04 22:43:39 +01:00
Jani Nikula
bfd7590d3e drm/i915: do not access BLC_PWM_CTL2 on pre-gen4 hardware
The BLC_PWM_CTL2 register does not exist before gen4. While at it, do a
slight drive by cleanup of the code.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-04 22:30:25 +01:00
Johannes Berg
a6662dbae0 cfg80211: check no-OFDM flag for channels wider than 20 MHz
For channels wider than 20 MHz OFDM will be used, so when
checking whether or not a channel is usable, check for the
no-OFDM flag if the channel is wider than 20 MHz.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-04 20:51:27 +01:00
David S. Miller
b1afce9538 ipv6: Protect ->mc_forwarding access with CONFIG_IPV6_MROUTE
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 14:46:34 -05:00
Thomas Gleixner
8d4516904b watchdog: Fix CPU hotplug regression
Norbert reported:
"3.7-rc6 booted with nmi_watchdog=0 fails to suspend to RAM or
 offline CPUs. It's reproducable with a KVM guest and physical
 system."

The reason is that commit bcd951cf(watchdog: Use hotplug thread
infrastructure) missed to take this into account. So the cpu offline
code gets stuck in the teardown function because it accesses non
initialized data structures.

Add a check for watchdog_enabled into that path to cure the issue.

Reported-and-tested-by: Norbert Warmuth <nwarmuth@t-online.de>
Tested-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1211231033230.2701@ionos
Link: http://bugs.launchpad.net/bugs/1079534
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-12-04 19:56:59 +01:00
Linus Walleij
2630b17b6e clk: ux500: fix bit error
This fixes a bit error in the U8500 clock implementation: the
unused p2_pclk12 registered at bit 12 in periphereral group 6
was defined as using bit 11 rather than bit 12.

When walking over and disabling the unused clocks in the tree
at late init time, p2_pclk12 was disabled, by effectively
clearing the but for p2_pclk11 instead of bit 12 as it should
have, thus disabling gpio block 6 and 7.

Reported-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Philippe Begnic <philippe.begnic@st.com>
Cc: stable@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-12-04 10:33:53 -08:00
Nicolas Dichtel
193c1e478c ip6mr: fix rtm_family of rtnl msg
We talk about IPv6, hence the family is RTNL_FAMILY_IP6MR!
rtnl_register() is already called with RTNL_FAMILY_IP6MR.

The bug is here since the beginning of this function (commit 5b285cac35).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:27:24 -05:00
Serge Hallyn
4e66ae2ea3 net: dev_change_net_namespace: send a KOBJ_REMOVED/KOBJ_ADD
When a new nic is created in namespace ns1, the kernel sends a KOBJ_ADD uevent
to ns1.  When the nic is moved to ns2, we only send a KOBJ_MOVE to ns2, and
nothing to ns1.

This patch changes that behavior so that when moving a nic from ns1 to ns2, we
send a KOBJ_REMOVED to ns1 and KOBJ_ADD to ns2.  (The KOBJ_MOVE is still
sent to ns2).

The effects of this can be seen when starting and stopping containers in
an upstart based host.  Lxc will create a pair of veth nics, the kernel
sends KOBJ_ADD, and upstart starts network-instance jobs for each.  When
one nic is moved to the container, because no KOBJ_REMOVED event is
received, the network-instance job for that veth never goes away.  This
was reported at https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1065589
With this patch the networ-instance jobs properly go away.

The other oddness solved here is that if a nic is passed into a running
upstart-based container, without this patch no network-instance job is
started in the container.  But when the container creates a new nic
itself (ip link add new type veth) then network-interface jobs are
created.  With this patch, behavior comes in line with a regular host.

v2: also send KOBJ_ADD to new netns.  There will then be a
_MOVE event from the device_rename() call, but that should
be innocuous.

Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:25:57 -05:00
Wei Yongjun
008d845cf6 net: neterion: use for_each_pci_dev to simplify the code
Use for_each_pci_dev to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:19:40 -05:00
Robert Love
ef60f67434 libfcoe: Save some memory and optimize name lookups
Instead of creating a structure with an enum and a pointer
to a string, simply allocate an array of strings and use
the enum values for the indicies.

This means that we do not need to iterate through the list
of entries when looking up a string name by its enum key.

This will also help with a latter patch that will add
more fcoe_sysfs attributes that will also use the
fcoe_enum_name_search macro. One attribute will also do
a reverse lookup which requires less code when the
enum-to-string mappings are organized as this patch makes
them to be.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-04 10:16:38 -08:00
Robert Love
354d1123c1 Documentation: Add missing devices/ to devices path
Add missing 'devices/ subdirectory to /sys/bus/fcoe/devices/ctlr_X
and /sys/bus/fcoe/devices/fcf_X references.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
2012-12-04 10:16:38 -08:00
Vasu Dev
5b97fabdc8 libfc: fix REC handling
Currently fc_fcp_timeout doesn't check FC_RP_FLAGS_REC_SUPPORTED
flag first, this prevents REC request ever going out at all
to the target having REC support. So this patches fixes the
fc_fcp_timeout by checking FC_RP_FLAGS_REC_SUPPORTED flag first.

The changed order won't cause any issue during clearing
FC_RP_FLAGS_REC_SUPPORTED on failed IO with target not supporting
FC_RP_FLAGS_REC_SUPPORTED, since retry on failed IO would succeed.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-04 10:16:38 -08:00
Nicolas Dichtel
812e44dd18 ip6mr: advertise new mfc entries via rtnl
This patch allows to monitor mf6c activities via rtnetlink.
To avoid parsing two times the mf6c oifs, we use maxvif to allocate the rtnl
msg, thus we may allocate some superfluous space.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:08:11 -05:00
Nicolas Dichtel
8cd3ac9f9b ipmr: advertise new mfc entries via rtnl
This patch allows to monitor mfc activities via rtnetlink.
To avoid parsing two times the mfc oifs, we use maxvif to allocate the rtnl
msg, thus we may allocate some superfluous space.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:08:11 -05:00
Nicolas Dichtel
1eb99af52c ipmr/ip6mr: allow to get unresolved cache via netlink
/proc/net/ip[6]_mr_cache allows to get all mfc entries, even if they are put in
the unresolved list (mfc[6]_unres_queue). But only the table RT_TABLE_DEFAULT is
displayed.
This patch adds the parsing of the unresolved list when the dump is made via
rtnetlink, hence each table can be checked.

In IPv6, we set rtm_type in ip6mr_fill_mroute(), because in case of unresolved
mfc __ip6mr_fill_mroute() will not set it. In IPv4, it is already done.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:08:11 -05:00
Nicolas Dichtel
9a68ac72a4 ipmr/ip6mr: report origin of mfc entry into rtnl msg
A mfc entry can be static or not (added via the mroute_sk socket). The patch
reports MFC_STATIC flag into rtm_protocol by setting rtm_protocol to
RTPROT_STATIC or RTPROT_MROUTED.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:08:11 -05:00
Nicolas Dichtel
adfa85e45d ipmr/ip6mr: advertise mfc stats via rtnetlink
These statistics can be checked only via /proc/net/ip_mr_cache or
SIOCGETSGCNT[_IN6] and thus only for the table RT_TABLE_DEFAULT.
Advertising them via rtnetlink allows to get statistics for all cache entries,
whatever the table is.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:08:10 -05:00
Nicolas Dichtel
70b386a0cc ip6mr: use nla_nest_* helpers
This patch removes the skb manipulations when nested attributes are added by
using standard helpers.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:08:10 -05:00
Nicolas Dichtel
d67b8c616b netconf: advertise mc_forwarding status
This patch advertise the MC_FORWARDING status for IPv4 and IPv6.
This field is readonly, only multicast engine in the kernel updates it.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:08:10 -05:00
David S. Miller
e8ad1a8fab Merge branch 'master' of git://1984.lsi.us.es/nf-next
Pablo Neira Ayuso says:

====================
* Remove limitation in the maximum number of supported sets in ipset.
  Now ipset automagically increments the number of slots in the array
  of sets by 64 new spare slots, from Jozsef Kadlecsik.

* Partially remove the generic queue infrastructure now that ip_queue
  is gone. Its only client is nfnetlink_queue now, from Florian
  Westphal.

* Add missing attribute policy checkings in ctnetlink, from Florian
  Westphal.

* Automagically kill conntrack entries that use the wrong output
  interface for the masquerading case in case of routing changes,
  from Jozsef Kadlecsik.

* Two patches two improve ct object traceability. Now ct objects are
  always placed in any of the existing lists. This allows us to dump
  the content of unconfirmed and dying conntracks via ctnetlink as
  a way to provide more instrumentation in case you suspect leaks,
  from myself.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:01:19 -05:00
Sony Chacko
099f7aa740 qlcnic: rename module params with module_param_named
Add qlcnic prefix to qlcnic driver module parameters.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:00:12 -05:00
Sony Chacko
5796bd040e qlcnic: fix bug in LRO descriptor access macro
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:00:12 -05:00
Sony Chacko
bff57d8e1d qlcnic: update NIC partition interface routines
Refactor 82xx driver to support new adapter
Update routines to support variable number of NIC partitions

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:00:12 -05:00
Sony Chacko
229997989b qlcnic: get board name API
Cleanup get board information API.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:00:12 -05:00
Sony Chacko
15087c2b31 qlcnic: modify PCI and register access routines
Refactor 82xx driver to support new adapter
Update PCI and hardware access routines

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 13:00:12 -05:00