Commit graph

126,468 commits

Author SHA1 Message Date
Jakub Kicinski
8e98387b16 Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:

====================
mlx5-next auxbus support

This pull request is targeting net-next and rdma-next branches.

This series provides mlx5 support for auxiliary bus devices.

It starts with a merge commit of tag 'auxbus-5.11-rc1' from
gregkh/driver-core into mlx5-next, then the mlx5 patches that will convert
mlx5 ulp devices (netdev, rdma, vdpa) to use the proper auxbus
infrastructure instead of the internal mlx5 device and interface management
implementation, which Leon is deleting at the end of this patchset.

Link: https://lore.kernel.org/alsa-devel/20201026111849.1035786-1-leon@kernel.org/

Thanks to everyone for the joint effort !

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  RDMA/mlx5: Remove IB representors dead code
  net/mlx5: Simplify eswitch mode check
  net/mlx5: Delete custom device management logic
  RDMA/mlx5: Convert mlx5_ib to use auxiliary bus
  net/mlx5e: Connect ethernet part to auxiliary bus
  vdpa/mlx5: Connect mlx5_vdpa to auxiliary bus
  net/mlx5: Register mlx5 devices to auxiliary virtual bus
  vdpa/mlx5: Make hardware definitions visible to all mlx5 devices
  net/mlx5_core: Clean driver version and name
  net/mlx5: Properly convey driver version to firmware
  driver core: auxiliary bus: minor coding style tweaks
  driver core: auxiliary bus: make remove function return void
  driver core: auxiliary bus: move slab.h from include file
  Add auxiliary bus support
====================

Link: https://lore.kernel.org/r/20201207053349.402772-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07 18:36:21 -08:00
Tariq Toukan
374a96b960 net/mlx4: Remove unused #define MAX_MSIX_P_PORT
All usages of the definition MAX_MSIX_P_PORT were removed.
It's not in use anymore. Remove it.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Link: https://lore.kernel.org/r/20201206091254.12476-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07 18:22:35 -08:00
Manivannan Sadhasivam
bdf7805b8c dt-bindings: clock: Add GDSC in SDX55 GCC
Add GDSC instances in SDX55 GCC block.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20201126072844.35370-6-manivannan.sadhasivam@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07 17:00:14 -08:00
Vinod Koul
2e2639b7ef dt-bindings: clock: Introduce RPMHCC bindings for SDX55
Add compatible for SDX55 RPMHCC and DT include.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201126072844.35370-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07 17:00:14 -08:00
Vinod Koul
a13ae5a379 dt-bindings: clock: Add SDX55 GCC clock bindings
Add device tree bindings for global clock controller on SDX55 SoCs.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201126072844.35370-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07 16:59:58 -08:00
Michael Walle
26792699fe clk: divider: add devm_clk_hw_register_divider_table()
This will simplify drivers which would only unregister the clk in their
remove() op.

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201108185113.31377-6-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07 16:53:39 -08:00
Michael Walle
4cb15934ba clk: qoriq: provide constants for the type
To avoid future mistakes in the device tree for the clockgen module, add
constants for the clockgen subtype as well as a macro for the PLL
divider.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201108185113.31377-4-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07 16:53:30 -08:00
Pavel Begunkov
661d4f55a7 sbitmap: remove swap_lock
map->swap_lock protects map->cleared from concurrent modification,
however sbitmap_deferred_clear() is already atomically drains it, so
it's guaranteed to not loose bits on concurrent
sbitmap_deferred_clear().

A one threaded tag heavy test on top of nullbk showed ~1.5% t-put
increase, and 3% -> 1% cycle reduction of sbitmap_get() according to perf.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07 17:12:49 -07:00
Arnd Bergmann
d9a9280a0d seq_buf: Avoid type mismatch for seq_buf_init
Building with W=2 prints a number of warnings for one function that
has a pointer type mismatch:

linux/seq_buf.h: In function 'seq_buf_init':
linux/seq_buf.h:35:12: warning: pointer targets in assignment from 'unsigned char *' to 'char *' differ in signedness [-Wpointer-sign]

Change the type in the function prototype according to the type in
the structure.

Link: https://lkml.kernel.org/r/20201026161108.3707783-1-arnd@kernel.org

Fixes: 9a7777935c ("tracing: Convert seq_buf fields to be like seq_file fields")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-12-07 18:25:02 -05:00
Michael Walle
0eba770790 clk: composite: add devm_clk_hw_register_composite_pdata()
This will simplify drivers which would only unregister the clk in their
remove() op.

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201105192746.19564-3-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07 14:06:16 -08:00
Weihang Li
53ef4999f0 RDMA/hns: Move capability flags of QP and CQ to hns-abi.h
These flags will be returned to the userspace through ABI, so they should
be defined in hns-abi.h. Furthermore, there is no need to include
hns-abi.h in every source files, it just needs to be included in the
common header file.

Link: https://lore.kernel.org/r/1606872560-17823-1-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07 15:48:51 -04:00
Mauro Carvalho Chehab
2988ca08ba IB: Fix kernel-doc markups
Some functions have different names between their prototypes and the
kernel-doc markup.

Others need to be fixed, as kernel-doc markups should use this format:
        identifier - description

Link: https://lore.kernel.org/r/78b98c41a5a0f4c0106433d305b143028a4168b0.1606823973.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07 15:45:00 -04:00
Jason Gunthorpe
9c0c17c611 mlx5-next-2020-12-02
Low level mlx5 updates required by both netdev and rdma trees:
 
   net/mlx5: Treat host PF vport as other (non eswitch manager) vport
   net/mlx5: Enable host PF HCA after eswitch is initialized
   net/mlx5: Rename peer_pf to host_pf
   net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
   net/mlx5: Export steering related functions
   net/mlx5: Expose other function ifc bits
   net/mlx5: Expose IP-in-IP TX and RX capability bits
   net/mlx5: Update the hardware interface definition for vhca state
   net/mlx5: Update the list of the PCI supported devices
   net/mlx5: Avoid exposing driver internal command helpers
   net/mlx5: Add ts_cqe_to_dest_cqn related bits
   net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
   net/mlx5: Check dr mask size against mlx5_match_param size
   net/mlx5: Add sampler destination type
   net/mlx5: Add sample offload hardware bits and structures
 
 Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl/IOZcACgkQSD+KveBX
 +j4J8wgAuxwflrYrbCWXV7LE08J7T7ZHRDE+jEbaZ0Zp9mOsYDDpcifpKwy2EVRf
 RKcpMYh/GzAljmEpeWIAlMxmlpXhKWXTDruWCx73r1jvdXf/RU24/zQHa6BjeiDo
 rMB8bgiW4a66+z4LcN/U6ahbVM5gScBNEt2sS1OIi9ZInngGVo9FgfhYMpERPNcH
 3+mcHulCnGBNbbLwoTllOcgbxexn+xoByukg5Z0ddBJp007DMjzBIWDpDS0y2HaT
 jGo1LYONgRc3zoGVmdeu9F+tSsWBIgsaiyGxKj1T/8sZUaNz2TKj9VOiYIj9BLff
 cp6GRc88k7HWA4tImSHQiLbK6cx+yA==
 =mjvI
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-next-2020-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Saeed Mahameed says:

====================
mlx5-next-2020-12-02

Low level mlx5 updates required by both netdev and rdma trees:

  net/mlx5: Treat host PF vport as other (non eswitch manager) vport
  net/mlx5: Enable host PF HCA after eswitch is initialized
  net/mlx5: Rename peer_pf to host_pf
  net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
  net/mlx5: Export steering related functions
  net/mlx5: Expose other function ifc bits
  net/mlx5: Expose IP-in-IP TX and RX capability bits
  net/mlx5: Update the hardware interface definition for vhca state
  net/mlx5: Update the list of the PCI supported devices
  net/mlx5: Avoid exposing driver internal command helpers
  net/mlx5: Add ts_cqe_to_dest_cqn related bits
  net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
  net/mlx5: Check dr mask size against mlx5_match_param size
  net/mlx5: Add sampler destination type
  net/mlx5: Add sample offload hardware bits and structures
====================

Link: https://lore.kernel.org/r/20201203011010.213440-1-saeedm@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07 15:37:33 -04:00
Jason Gunthorpe
6e0954b11c RDMA/uverbs: Allow drivers to create a new HW object during rereg_mr
mlx5 has an ugly flow where it tries to allocate a new MR and replace the
existing MR in the same memory during rereg. This is very complicated and
buggy. Instead of trying to replace in-place inside the driver, provide
support from uverbs to change the entire HW object assigned to a handle
during rereg_mr.

Since destroying a MR is allowed to fail (ie if a MW is pointing at it)
and can't be detected in advance, the algorithm creates a completely new
uobject to hold the new MR and swaps the IDR entries of the two objects.

The old MR in the temporary IDR entry is destroyed, and if it fails
rereg_mr succeeds and destruction is deferred to FD release. This
complexity is why this cannot live in a driver safely.

Link: https://lore.kernel.org/r/20201130075839.278575-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07 14:06:23 -04:00
Jason Gunthorpe
adac4cb3c1 RDMA/uverbs: Check ODP in ib_check_mr_access() as well
No reason only one caller checks this. This properly blocks ODP
from the rereg flow if the device does not support ODP.

Link: https://lore.kernel.org/r/20201130075839.278575-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07 14:06:23 -04:00
Jonathan Neuschäfer
c69942bda5 mtd: spi-nor: Fix multiple typos
There are a few typos in comments in the SPI NOR framework; fix them.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201130152416.1283972-1-j.neuschaefer@gmx.net
2020-12-07 22:57:28 +05:30
Daniel Winkler
4d9b952857 Bluetooth: Change MGMT security info CMD to be more generic
For advertising, we wish to know the LE tx power capabilities of the
controller in userspace, so this patch edits the Security Info MGMT
command to be more generic, such that other various controller
capabilities can be included in the EIR data. This change also includes
the LE min and max tx power into this newly-named command.

The change was tested by manually verifying that the MGMT command
returns the tx power range as expected in userspace.

Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 17:01:42 +02:00
Daniel Winkler
7c395ea521 Bluetooth: Query LE tx power on startup
Queries tx power via HCI_LE_Read_Transmit_Power command when the hci
device is initialized, and stores resulting min/max LE power in hdev
struct. If command isn't available (< BT5 support), min/max values
both default to HCI_TX_POWER_INVALID.

This patch is manually verified by ensuring BT5 devices correctly query
and receive controller tx power range.

Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 17:01:38 +02:00
Daniel Winkler
9bf9f4b630 Bluetooth: Use intervals and tx power from mgmt cmds
This patch takes the min/max intervals and tx power optionally provided
in mgmt interface, stores them in the advertisement struct, and uses
them when configuring the hci requests. While tx power is not used if
extended advertising is unavailable, software rotation will use the min
and max advertising intervals specified by the client.

This change is validated manually by ensuring the min/max intervals are
propagated to the controller on both hatch (extended advertising) and
kukui (no extended advertising) chromebooks, and that tx power is
propagated correctly on hatch. These tests are performed with multiple
advertisements simultaneously.

Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 17:01:33 +02:00
Daniel Winkler
1241057283 Bluetooth: Break add adv into two mgmt commands
This patch adds support for the new advertising add interface, with the
first command setting advertising parameters and the second to set
advertising data. The set parameters command allows the caller to leave
some fields "unset", with a params bitfield defining which params were
purposefully set. Unset parameters will be given defaults when calling
hci_add_adv_instance. The data passed to the param mgmt command is
allowed to be flexible, so in the future if bluetoothd passes a larger
structure with new params, the mgmt command will ignore the unknown
members at the end.

This change has been validated on both hatch (extended advertising) and
kukui (no extended advertising) chromebooks running bluetoothd that
support this new interface. I ran the following manual tests:
- Set several (3) advertisements using modified test_advertisement.py
- For each, validate correct data and parameters in btmon trace
- Verified both for software rotation and extended adv

Automatic test suite also run, testing many (25) scenarios of single and
multi-advertising for data/parameter correctness.

Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 17:01:28 +02:00
Daniel Winkler
31aab5c22e Bluetooth: Add helper to set adv data
We wish to handle advertising data separately from advertising
parameters in our new MGMT requests. This change adds a helper that
allows the advertising data and scan response to be updated for an
existing advertising instance.

Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 17:01:25 +02:00
Howard Chung
80af16a3e4 Bluetooth: Add toggle to switch off interleave scan
This patch add a configurable parameter to switch off the interleave
scan feature.

Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 17:01:00 +02:00
Howard Chung
c4f1f40816 Bluetooth: Interleave with allowlist scan
This patch implements the interleaving between allowlist scan and
no-filter scan. It'll be used to save power when at least one monitor is
registered and at least one pending connection or one device to be
scanned for.

The durations of the allowlist scan and the no-filter scan are
controlled by MGMT command: Set Default System Configuration. The
default values are set randomly for now.

Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 17:00:43 +02:00
Reo Shiseki
353021588c Bluetooth: fix typo in struct name
Signed-off-by: Reo Shiseki <reoshiseki@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 16:51:22 +02:00
Karol Trzcinski
8f6cfbb6d4
ASoC: SOF: trace: Add runtime trace filtering mechanism
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.

The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;

This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.

An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.

When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-07 14:22:05 +00:00
Laurent Pinchart
e9a66489c3 media: doc: pixfmt-rgb: Clarify naming scheme for RGB formats
The naming scheme for the RGB pixel formats has been developed
organically, and isn't consistent between formats using less than 8 bits
per pixels (mostly stored in 1 or 2 bytes per pixel, except for RGB666
that uses 4 bytes per pixel) and formats with 8 bits per pixel (stored
in 3 or 4 bytes). For the latter category, the names use a components
order convention that is the opposite of the first category, and the
opposite of DRM pixel formats. This has led to lots of confusion in the
past, and would really benefit from being explained more precisely. Do
so, which also prepares for the addition of additional RGB pixels
formats.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 14:02:37 +01:00
Laurent Pinchart
473dbed54f media: videodev2.h: Move HM12 format to YUV semi-planar section
V4L2_PIX_FMT_HM12 is a YUV semi-planar macro-block format. Move it from
the packed YUV formats section where it was misplaced to the YUV
semi-planar formats section.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 13:59:24 +01:00
Laurent Pinchart
0a078e0d8e media: videodev2.h: Move HI240 format to vendor-specific section
V4L2_PIX_FMT_HI240 is a 8-bit dithered RGB format specific to BTTV. Move
it from the packed YUV formats section where it was misplaced to the
vendor-specific formats section.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 13:58:16 +01:00
Laurent Pinchart
3771c031d6 media: videodev2.h: Remove unneeded comment about 4CC value
The V4L2_PIX_FMT_BGRA444 format has a comment that explains why its 4CC
value is GA12. This explains the development history and isn't of much
interest to readers, it should have been part of a commit message
instead. Drop the comment, anyone interested in history can turn to git.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 13:57:36 +01:00
Jonas Karlman
d5da31f902 media: rc: add keymap for pine64 remote
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to
KEY_EPG to provide a more useful remote.

[0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 13:51:59 +01:00
Rafael J. Wysocki
7482c5cb90 PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to
be reference counted for wakeup enabling, because they may be enabled
to signal wakeup on behalf of their subordinate devices and that
may happen for multiple times in a row, whereas for the other devices
it only makes sense to enable wakeup signaling once.

However, this becomes problematic if the bridge itself is suspended,
because it is treated as a "regular" device in that case and the
reference counting doesn't work.

For instance, suppose that there are two devices below a bridge and
they both can signal wakeup.  Every time one of them is suspended,
wakeup signaling is enabled for the bridge, so when they both have
been suspended, the bridge's wakeup reference counter value is 2.

Say that the bridge is suspended subsequently and acpi_pci_wakeup()
is called for it.  Because the bridge can signal wakeup, that
function will invoke acpi_pm_set_device_wakeup() to configure it
and __acpi_pm_set_device_wakeup() will be called with the last
argument equal to 1.  This causes __acpi_device_wakeup_enable()
invoked by it to omit the reference counting, because the reference
counter of the target device (the bridge) is 2 at that time.

Now say that the bridge resumes and one of the device below it
resumes too, so the bridge's reference counter becomes 0 and
wakeup signaling is disabled for it, but there is still the other
suspended device which may need the bridge to signal wakeup on its
behalf and that is not going to work.

To address this scenario, use wakeup enable reference counting for
all devices, not just for bridges, so drop the last argument from
__acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(),
which causes acpi_pm_set_device_wakeup() and
acpi_pm_set_bridge_wakeup() to become identical, so drop the latter
and use the former instead of it everywhere.

Fixes: 1ba51a7c14 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
2020-12-07 13:45:11 +01:00
Johan Hovold
2d26c716fc module: drop semicolon from version macro
Drop the trailing semicolon from the MODULE_VERSION() macro definition
which was left when removing the array-of-pointer indirection.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-12-07 13:00:52 +01:00
Johan Hovold
76437b340b earlycon: drop semicolon from earlycon macro
Drop the trailing semicolon from the OF_EARLYCON_DECLARE() macro
definition which was left when removing the array-of-pointer
indirection.

Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20201207091601.5202-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-07 10:40:32 +01:00
Alexander Usyskin
85261c1ff1 mei: bus: add vtag support
Add API to support vtag in communication on mei bus.

Add mei_cldev_send_vtag, mei_cldev_recv_vtag and
mei_cldev_recv_nonblock_vtag functions to allow sending a message
with vtag set and to receive vtag of an incoming message.

Cc: Sean Z Huang <sean.z.huang@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201116125612.1660971-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-07 10:29:57 +01:00
Greg Kroah-Hartman
6e559fe128 soundwire updates for 5.11-rc1
Updates for last PR for this year contain:
 - Improvements from Intel for port interrupt handling
 - SDCA cascade interrupt support
 - runtime pm for master device
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl/NtZwACgkQfBQHDyUj
 g0fXVw//ewFAHbj6dDWZEvI46mvlqQkvmYk6oViSN/tLdLu3Ay0ggDpMWht5vzf/
 IfhxgassigWEY0aFxBrhj/TxOVJuuJpMVGWg0xyLZIngyrDmghRYqt+Ssk6AAX9t
 dN9mr5mxR0EI6CY0/jX62WRHvy/NVk9FFXuRRpsFF6HEDQcIKCEfXxl/5mhFnMuL
 D52wyxfgn8jOJ11sR5uOn8QPpA9ZGjRsw52LlZKTqNn07kclEcE0r+B30+7GvEYV
 HlWh6BGR4BoAygJwfTjTwU0WA3fBSccpFAfmDojY32qncrVzYRq8amYe5DxPKK17
 E7dZMWGZY4KWy9O8GG+ENuDtHQk8G30tcf+9kDbhLL7Izrrnf3de6aRbRmHx73i1
 4mWcFld5Eq0IaDjlYBcxuanJ6fKxPambEVVihA90rhCfXszNu27sron5AmYwKwk+
 FA417GDbM9VBLSif4qrq+LrCRrIO3ixhPgmMcpakuo+m9y0KvzEJiT5MZiSFZjMG
 UnEOKKAC6M04NxnttxmXLS1MQRxp4n9gOwjN/slSvrCIakBur64hurzdh/7BUO3Q
 cW4naYGkBhyQ1XMjtOyg+gj7u+btt9bqOVghWiixXkvahQsjq8dsMPN85ghA9M2P
 K9/kyBvyJUoGPd5nUgbbKXSnPF6KFP2CdrSeucR9v/6v9pg58Qs=
 =cDZP
 -----END PGP SIGNATURE-----

Merge tag 'soundwire-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.11-rc1

Updates for last PR for this year contain:
- Improvements from Intel for port interrupt handling
- SDCA cascade interrupt support
- runtime pm for master device

* tag 'soundwire-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: intel: fix another unused-function warning
  soundwire: master: use pm_runtime_set_active() on add
  soundwire: qcom: Fix build failure when slimbus is module
  soundwire: bus: only clear valid DPN interrupts
  soundwire: bus: only clear valid DP0 interrupts
  soundwire: registers: add definitions for clearable interrupt fields
  soundwire: bus: reset slave_notify status at each loop
  soundwire: bus: add comments to explain interrupt loop filter
  soundwire: SDCA: detect sdca_cascade interrupt
  soundwire: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
2020-12-07 10:24:45 +01:00
Greg Kroah-Hartman
93837812a5 Merge 5.10-rc7 into usb-next
We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-07 10:20:51 +01:00
Greg Kroah-Hartman
ba3b8bb126 Merge 5.10-rc7 into tty-next
We want the tty fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-07 10:19:31 +01:00
Greg Kroah-Hartman
a3ab07c642 Merge 5.10-rc7 into char-misc-next
We want the fixes in here, and this resolves a merge issue with
drivers/misc/habanalabs/common/memory.c.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-07 10:08:14 +01:00
Chanwoo Choi
afd589c703 Tegra SoC and clock controller changes for v5.11
Export symbols and add stubs necessary for upcoming modified Tegra
 memory controller drivers (touching also devfreq and interconnect).
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl+826IQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1zhJEACH+n5n7l1GIP+pqgizl3I4eg6DJaZqnS0i
 JeW/f20sjT0jpdOP2YsqlNxdNrTceQAYEceIZFo85erQzX2v27Jdw3+xOrisUFCn
 GrA+wrLLEs9hJ6YS1+XBET2lzc5C8XxKhODrXNBTsU1BN4kDkso40/Xiz1QbP4Ty
 P0kUwqNEU/rdRPCHP1Gpa4Y/QGBRqtm9FPEwRjvURKjuFwHEjX2hpOZJd2TJCS7U
 I4pCxKuokI+NGiF9fvw5XzZZ/UhWTu193jVGkT1A3aHlRZ9ZIJHb/qqUsT4aGNW7
 5WSwLHCkvI5jkNy4JnYQzKAumQLpfxS0R53cHYQ8MeRbuiR37Pu3f0KWM/yDB3cZ
 0Sy/YMFOa6C9hRfRO+zq2t0KMO7PXcZ7S2T81YAvs/048rWOT8wleZfw9OiQgtJg
 9k8Yr5lhvr2KCznOZcTbMlpIH9c0ynS3MrOOGt7UY5UEBw57zbhaKkqcP/tazLzZ
 s+GKbdv6aVSUIJzJOIr6Ib/wHXN9lx1Bwb0VBbGIa2PJT6fnhKjWnH/LZNIwzaH8
 yWyTTm1y1AyNNWeeYexm21L0eDAQgbXSqejuQ9/kNZCQXwdGEQS9WtOxeq3OFU6m
 bnuJR1DS1wDXaCRGT6604PPXpRK4o1itY02B81uNulnwr3420Hkl6oULIfu1CIwZ
 PSeZvspRtQ==
 =LK/N
 -----END PGP SIGNATURE-----

Merge tag 'tegra-soc-clk-drivers-5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into devfreq-next

Tegra SoC and clock controller changes for v5.11

Export symbols and add stubs necessary for upcoming modified Tegra
memory controller drivers (touching also devfreq and interconnect).
2020-12-07 10:25:03 +09:00
Linus Torvalds
d49248eb25 TTY fixes for 5.10-rc7
Here are two tty core fixes for 5.10-rc7.
 
 They resolve some reported locking issues in the tty core.  While they
 have not been in a released linux-next yet, they have passed all of the
 0-day bot testing as well as the submitter's testing.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8zqVA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn6aACgiBghNkA6SJIjM1mcPCI/Nkvs3qoAn0g+l8Z1
 zATUgLS4xqAHnYXUfHpy
 =eB5C
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty fixes from Greg KH:
 "Here are two tty core fixes for 5.10-rc7.

  They resolve some reported locking issues in the tty core. While they
  have not been in a released linux-next yet, they have passed all of
  the 0-day bot testing as well as the submitter's testing"

* tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix ->session locking
  tty: Fix ->pgrp locking in tiocspgrp()
2020-12-06 11:43:50 -08:00
Linus Torvalds
592d9a0835 A set of updates for the interrupt subsystem:
- Make multiqueue devices which use the managed interrupt affinity
     infrastructure work on PowerPC/Pseries. PowerPC does not use the
     generic infrastructure for setting up PCI/MSI interrupts and the
     multiqueue changes failed to update the legacy PCI/MSI infrastructure.
     Make this work by passing the affinity setup information down to the
     mapping and allocation functions.
 
   - Move Jason Cooper from MAINTAINERS to CREDITS as his mail is bouncing
     and he's not reachable. We hope all is well with him and say thanks
     for his work over the years.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/M1GwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoW8xD/4uG/0ayYgSdRf4nXcyXu4JKoHV5oK5
 y7IWY9s04fqTFbVO2fRaD1hBYHavWfdV80obP8dJio1g6R1BqzZiEVUmCdWI0tHJ
 recAsGYxqPrNj9soHEZ7ZmuGX6VhuzQj57srU+lhzsqk+88uY/n1d/TlrHCH7miU
 0cfBSoolP2l2p6UYHvXfH2wk1hRHg8sySOfxGSp6KSrewoOwAOT2CCNX8gIcmy1n
 dUsJaHEFzU547p55zDs5DTHfM0yJdsqqUpdxvpiZWpZhsIzoQvd8taiH7/uaRGqd
 yJI4sMWudJUGGas2Vq0yjG6L0uAJ7M+kjqodJzn0hAKq6MhAIKaPMEbpPx9TuZYb
 zZg9ce5o4LwzTphNPmcEMCjpPKRGNiEbcl1XY4qhQWnBvuOb1mIBFV4+6srd+Lpg
 o7kEt+XyjKZARgw01yDf9tHSJYOcBQuHqGUdRZQAWSCThizpQsOZJaUWB8l4mLDy
 fScYx4cH12oPmCg3Fdd22oq7JN0ed9O3M7BLuzmI006uSWsB8fbfEcM+k+g+63Go
 xpHYKM6VOzLlspFPFvVo3nwzvc787he2I9tIOPtCU0Hl4BBjjfGyB9FcnhNShNoe
 dfVVzTaEWmHNGonTI61suwZJeyOTudzHqbgw5rAmqmJeV5R8gFSiGmzINlqoWZX6
 TWDVz4Y1ma8QwA==
 =/DKJ
 -----END PGP SIGNATURE-----

Merge tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of updates for the interrupt subsystem:

   - Make multiqueue devices which use the managed interrupt affinity
     infrastructure work on PowerPC/Pseries. PowerPC does not use the
     generic infrastructure for setting up PCI/MSI interrupts and the
     multiqueue changes failed to update the legacy PCI/MSI
     infrastructure. Make this work by passing the affinity setup
     information down to the mapping and allocation functions.

   - Move Jason Cooper from MAINTAINERS to CREDITS as his mail is
     bouncing and he's not reachable. We hope all is well with him and
     say thanks for his work over the years"

* tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  powerpc/pseries: Pass MSI affinity to irq_create_mapping()
  genirq/irqdomain: Add an irq_create_mapping_affinity() function
  MAINTAINERS: Move Jason Cooper to CREDITS
2020-12-06 11:15:55 -08:00
Minchan Kim
e91d8d7823 mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPING
While I was doing zram testing, I found sometimes decompression failed
since the compression buffer was corrupted.  With investigation, I found
below commit calls cond_resched unconditionally so it could make a
problem in atomic context if the task is reschedule.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:108
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog
  3 locks held by memhog/946:
   #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160
   #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160
   #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0
  CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
  Call Trace:
    unmap_kernel_range_noflush+0x2eb/0x350
    unmap_kernel_range+0x14/0x30
    zs_unmap_object+0xd5/0xe0
    zram_bvec_rw.isra.0+0x38c/0x8e0
    zram_rw_page+0x90/0x101
    bdev_write_page+0x92/0xe0
    __swap_writepage+0x94/0x4a0
    pageout+0xe3/0x3a0
    shrink_page_list+0xb94/0xd60
    shrink_inactive_list+0x158/0x460

We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which
contains the offending calling code) from zsmalloc.

Even though this option showed some amount improvement(e.g., 30%) in
some arm32 platforms, it has been headache to maintain since it have
abused APIs[1](e.g., unmap_kernel_range in atomic context).

Since we are approaching to deprecate 32bit machines and already made
the config option available for only builtin build since v5.8, lastly it
has been not default option in zsmalloc, it's time to drop the option
for better maintenance.

[1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org

Fixes: e47110e905 ("mm/vunmap: add cond_resched() in vunmap_pmd_range")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Harish Sriram <harish@linux.ibm.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-06 10:19:07 -08:00
Leon Romanovsky
e87114022e net/mlx5: Simplify eswitch mode check
Provide mlx5_core device instead of "priv" pointer while checking
eswith mode.

Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2020-12-06 07:43:54 +02:00
Leon Romanovsky
601c10c89c net/mlx5: Delete custom device management logic
After conversion to use auxiliary bus, all custom device management is
not needed anymore, delete it.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2020-12-06 07:43:54 +02:00
Vladimir Oltean
edd2410b16 net: mscc: ocelot: fix dropping of unknown IPv4 multicast on Seville
The current assumption is that the felix DSA driver has flooding knobs
per traffic class, while ocelot switchdev has a single flooding knob.
This was correct for felix VSC9959 and ocelot VSC7514, but with the
introduction of seville VSC9953, we see a switch driven by felix.c which
has a single flooding knob.

So it is clear that we must do what should have been done from the
beginning, which is not to overwrite the configuration done by ocelot.c
in felix, but instead to teach the common ocelot library about the
differences in our switches, and set up the flooding PGIDs centrally.

The effect that the bogus iteration through FELIX_NUM_TC has upon
seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and
ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will
actually overwrite ANA_FLOODING_IPMC when attempting to write
ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING.

And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect
is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D:
	MC6_DATA = 61,
	MC6_CTRL = 61,
	MC4_DATA = 60,
	MC4_CTRL = 0.
Because MC4_CTRL is zero, this means that IPv4 multicast control packets
are not flooded, but dropped. An invalid configuration, and this is how
the issue was actually spotted.

Reported-by: Eldar Gasanov <eldargasanov2@gmail.com>
Reported-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: Eldar Gasanov <eldargasanov2@gmail.com>
Fixes: 84705fc165 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 3c7b51bd39 ("net: dsa: felix: allow flooding for all traffic classes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05 15:41:34 -08:00
Jakub Kicinski
78d6bb584d This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
 
  - update include for min/max helpers, by Sven Eckelmann
 
  - add infrastructure and netlink functions for routing algo selection,
    by Sven Eckelmann (2 patches)
 
  - drop deprecated debugfs and sysfs support and obsoleted
    functionality, by Sven Eckelmann (3 patches)
 
  - drop unused include in fragmentation.c, by Simon Wunderlich
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAl/KWIkWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoTrTEACUImdOCWv4+NnEQfChQv6Y3i18
 gJABXoOkWLfFpGBUlw/uYzFKpMEWZ0orHig9gucC+rmjNc8veWwAOugJoTPTKQJZ
 /4yndhM0x39vWex03rdDmyqzCEh1V1Q9VcdEuD6XbJDaK5F4jDu3NQVneOijIkN+
 5PzhlvtUlfe8csykOCOoC9Y5wy82fEhcEvuSq+Z6dU3Cb3EGHtEUtZ4orDkpnnml
 7XEcn5C5+OFGlz/ikiszKumTtNK+dmGluOxoyfAzEjQHK7PoTorcXFS2YUoSWeqQ
 gmYZ56RBqEHjo4eqcaEgcqq5v8cTPCEMCB8UQjAffxrhloRKHRhQOysG1+OnzGA8
 IQ2ARHLQCVPVraXF2ixE0D3BvjKmtMmcvZOCXwhCHDajn9jFKAh0+hnInDyv6Fp1
 7eUfpHACL9EQDxKWXeQg37X2mk3hHJ+4zgZOYidahVeKbiiexe2heaHTYAbr9rIf
 8hvtlgMg4AnwL3IxadrKwsbJ5t7TEPLTInf47hPvpRg7SmthDTcgso4VDwmWgB8W
 Tlug8/NoXXDCmDhXUpvyi9+idHe0J8xvHl/2xGC7aSsPAbuhqOuefMKr36YhXJTY
 vBA5Ih5ppylJ8Dzwa0TbonvQbOAinA8YTa6izKxY4e+xTPB2jz/WT2vciEZv2+ig
 vNIPFrLZ7OFMohCDfQ==
 =tNKF
 -----END PGP SIGNATURE-----

Merge tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
This cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - update include for min/max helpers, by Sven Eckelmann

 - add infrastructure and netlink functions for routing algo selection,
   by Sven Eckelmann (2 patches)

 - drop deprecated debugfs and sysfs support and obsoleted
   functionality, by Sven Eckelmann (3 patches)

 - drop unused include in fragmentation.c, by Simon Wunderlich

* tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge:
  batman-adv: Drop unused soft-interface.h include in fragmentation.c
  batman-adv: Drop legacy code for auto deleting mesh interfaces
  batman-adv: Drop deprecated debugfs support
  batman-adv: Drop deprecated sysfs support
  batman-adv: Allow selection of routing algorithm over rtnetlink
  batman-adv: Prepare infrastructure for newlink settings
  batman-adv: Add new include for min/max helpers
  batman-adv: Start new development cycle
====================

Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05 15:08:06 -08:00
Kent Gibson
26d060e47e gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
Using CLOCK_REALTIME as the source for event timestamps is crucial for
some specific applications, particularly those requiring timetamps
relative to a PTP clock, so provide an option to switch the event
timestamp source from the default CLOCK_MONOTONIC to CLOCK_REALTIME.

Note that CLOCK_REALTIME was the default source clock for GPIO until
Linux 5.7 when it was changed to CLOCK_MONOTONIC due to issues with the
shifting of the realtime clock.
Providing this option maintains the CLOCK_MONOTONIC as the default,
while also providing a path forward for those dependent on the pre-5.7
behaviour.

Suggested-by: Jack Winch <sunt.un.morcov@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20201014231158.34117-2-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 23:22:47 +01:00
Daniel Palmer
588cc1a026 dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
Header adds defines for the gpio number of each pad from the driver view.

The gpio block seems to have enough registers for 128 lines but what line
is mapped to a physical pin depends on the chip. The gpio block also seems
to contain some registers that are not related to gpio but needed somewhere
to go.

Because of the above the driver itself uses the index of a pin's offset in
an array of the possible offsets for a chip as the gpio number.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201129110803.2461700-2-daniel@0x0f.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 22:40:28 +01:00
Thierry Reding
64a38367b4 dt-bindings: gpio: Use Tegra186-specific include guard
Use a unique include guard for the Tegra186 GPIO DT bindings header to
avoid clashes with the DT bindings header for earlier chips.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201127140852.123192-2-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 22:34:12 +01:00
Sean V Kelley
507b460f81 PCI/ERR: Add pcie_link_rcec() to associate RCiEPs
A Root Complex Event Collector terminates error and PME messages from
associated RCiEPs.

Use the RCEC Endpoint Association Extended Capability to identify
associated RCiEPs. Link the associated RCiEPs as the RCECs are enumerated.

Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20201121001036.8560-12-sean.v.kelley@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-05 15:26:02 -06:00