With a stream with low bitrate, user can't pause or resume the stream
near the end of the stream because current ALSA doesn't allow it.
If the stream has very low bitrate enough to store whole stream into
the buffer, user can't do anything except stop the stream and then
restart it from the first because most of applications call draining
after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be
enhanced.
To prevent malfunction in HW drivers which don't support pause
during draining, pause during draining will only work if HW driver
enable this feature explicitly by calling
snd_compr_use_pause_in_draining().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/000101d6c3f0$89b312b0$9d193810$@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl/A5GkACgkQnJ2qBz9k
QNkcFgf/af1pjTXjYf8ZeyQUNgoA7LCq3Ut9QHQGHOGEYK5aKraff4DgFtcag7nN
4WNPuQh4YSZzDo4Xt/8BCKdcGjiQZ+/6zgn6jhs0q5eKnv7dup0ouQ8mCxpPdPG3
CPzfJtQkKBzKXzC9RFWrcmA6w+B7fDTFGUCsVoNJ3HkxkKSWQHfW5VmYNTi6ueLj
zy0hxyvPexN8+nWCw+ZqeKWhsm9aGwxjKVVErNuoj3Sk81zvkhvjZ7ab9Ep6ykek
hsFIjVVqm3kd+oE8yMNxPB+h6Iy/mZXNcwOwAnv+qJiIWJX5+xENSqfOQg0NkuD1
gzfSiCzm8Yz3PEoGWeNMxfBn3fOpOA==
=uwb7
-----END PGP SIGNATURE-----
Merge tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback fix from Jan Kara:
"A fix of possible missing string termination in writeback tracepoints"
* tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
trace: fix potenial dangerous pointer
Add parse_platform_ext_manifest() op to parse platform-specific config
data in the extended manifest.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This contains a couple of conversions of bindings to json-schema, as
well as symbolic names for the various memory clients on Tegra20,
Tegra30 and Tegra124. There's also a couple of fixes for Tegra194
pinmux and ARM GIC bindings. Finally, a new vendor prefix is added
for Ouya and the Ouya game console compatible string is defined.
-----BEGIN PGP SIGNATURE-----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=UKyi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.11-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.11-rc1
This contains a couple of conversions of bindings to json-schema, as
well as symbolic names for the various memory clients on Tegra20,
Tegra30 and Tegra124. There's also a couple of fixes for Tegra194
pinmux and ARM GIC bindings. Finally, a new vendor prefix is added
for Ouya and the Ouya game console compatible string is defined.
* tag 'tegra-for-5.11-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: bus: Convert ACONNECT doc to json-schema
dt-bindings: interrupt-controller: arm,gic: Update Tegra compatibles
dt-bindings: dma: Convert ADMA doc to json-schema
dt-bindings: Fix entry name for I/O High Voltage property
dt-bindings: ARM: tegra: Add Ouya game console
dt-bindings: Add vendor prefix for Ouya Inc.
dt-bindings: memory: tegra124: Add memory client IDs
dt-bindings: memory: tegra30: Add memory client IDs
dt-bindings: memory: tegra20: Add memory client IDs
Link: https://lore.kernel.org/r/20201127144329.124891-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The latest changes in restrack name handling allowed to simplify the QP
creation code to support all types of QPs.
For example XRC QP are presented with rdmatool.
$ ibv_xsrq_pingpong &
$ rdma res show qp
link ibp0s9/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 7 type UD state RTS sq-psn 0 comm [mlx5_ib]
link ibp0s9/1 lqpn 42 type XRC_TGT state INIT sq-psn 0 path-mig-state MIGRATED comm [ib_uverbs]
link ibp0s9/1 lqpn 43 type XRC_INI state INIT sq-psn 0 path-mig-state MIGRATED pdn 197 pid 419 comm ibv_xsrq_pingpong
Link: https://lore.kernel.org/r/20201117070148.1974114-4-leon@kernel.org
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver QP types are special case with no IBTA restrictions. For example,
EFA implemented creation of this QP type as regular one, while mlx5
separated create to two step: create and modify. That separation causes to
the situation where DC QP (mlx5) is always added to the same xarray index
zero.
This change allows to drivers like mlx5 simply disable restrack DB
tracking, but it doesn't disable kref on the memory.
Fixes: 52e0a118a2 ("RDMA/restrack: Track driver QP types in resource tracker")
Link: https://lore.kernel.org/r/20201117070148.1974114-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce support into the nvmem core for arrays of register ranges
that should not result in actual device access. For these regions a
constant byte (repeated) is returned instead on read, and writes are
quietly ignored and returned as successful.
This is useful for instance if certain efuse regions are protected
from access by Linux because they contain secret info to another part
of the system (like an integrated modem).
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102837.19366-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the hidraw module can only read and write feature HID reports on
demand, via dedicated ioctls. Input reports are read from the device through
the read() interface, while output reports are written through the write
interface().
This is insufficient; it is desirable in many situations to be able to read and
write input and output reports through the control interface to cover
additional scenarios:
- Reading an input report by its report ID, to get initial state
- Writing an input report, to set initial input state in the device
- Reading an output report by its report ID, to obtain current state
- Writing an output report by its report ID, out of band
This patch adds these missing ioctl requests to read and write the remaining
HID report types. Note that not all HID backends will neccesarily support this
(e.g. while the USB link layer supports setting Input reports, others may not).
Also included are documentation and example updates. The current hidraw
documentation states that feature reports read from the device does *not*
include the report ID, however this is not the case and the returned report
will have its report ID prepended by conforming HID devices, as the report data
sent from the device over the control endpoint must be indentical in format to
those sent over the regular transport.
Signed-off-by: Dean Camera <dean@fourwalledcubicle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the maximum HID report size which can be buffered by the kernel is
8KB. This is sufficient for the vast majority of HID devices on the market, as
most HID reports are fairly small.
However, some unusual devices such as the Elgate Stream Deck exist which use a
report size slightly over 8KB for the image data that is sent to the device.
Reports these large cannot be buffered by the regular HID subsystem currently,
thus the only way to use such device is to bypass the HID subsystem entirely.
This increases the maximum HID report size to 16KB, which should cover all
sanely designed HID devices.
Signed-off-by: Dean Camera <dean@fourwalledcubicle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
-----BEGIN PGP SIGNATURE-----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=KSUM
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Userspace might match on prefix bytes of header fields if they are on
the byte boundary, this requires that the mask is adjusted accordingly.
Use NFT_OFFLOAD_MATCH_EXACT() for meta since prefix byte matching is not
allowed for this type of selector.
The bitwise expression might be optimized out by userspace, hence the
kernel needs to infer the prefix from the number of payload bytes to
match on. This patch adds nft_payload_offload_mask() to calculate the
bitmask to match on the prefix.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds nft_flow_rule_set_addr_type() to set the address type
from the nft_payload expression accordingly.
If the address type is not set in the control dissector then a rule that
matches either on source or destination IP address does not work.
After this patch, nft hardware offload generates the flow dissector
configuration as tc-flower does to match on an IP address.
This patch has been also tested functionally to make sure packets are
filtered out by the NIC.
This is also getting the code aligned with the existing netfilter flow
offload infrastructure which is also setting the control dissector.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add the needed board data to support mt8192 SoC.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Weiyi Lu <weiyi.lu@mediatek.com>
Link: https://lore.kernel.org/r/20201030113622.201188-17-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Bus protection is not exclusively done by calling the infracfg misc driver.
Make the calls for setting and clearing the bus protection generic so
that we can use other blocks for it as well.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201030113622.201188-6-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
redact XFRM SA secret in the netlink response to xfrm_get_sa()
or dumpall sa.
Enable lockdown, confidentiality mode, at boot or at run time.
e.g. when enabled:
cat /sys/kernel/security/lockdown
none integrity [confidentiality]
ip xfrm state
src 172.16.1.200 dst 172.16.1.100
proto esp spi 0x00000002 reqid 2 mode tunnel
replay-window 0
aead rfc4106(gcm(aes)) 0x0000000000000000000000000000000000000000 96
note: the aead secret is redacted.
Redacting secret is also a FIPS 140-2 requirement.
v1->v2
- add size checks before memset calls
v2->v3
- replace spaces with tabs for consistency
v3->v4
- use kernel lockdown instead of a /proc setting
v4->v5
- remove kconfig option
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
At the moment we allow bypassing DMA ops only when we can do this for
the entire RAM. However there are configs with mixed type memory
where we could still allow bypassing IOMMU in most cases;
POWERPC with persistent memory is one example.
This adds an arch hook to determine where bypass can still work and
we invoke direct DMA API. The following patch checks the bus limit
on POWERPC to allow or disallow direct mapping.
This adds a ARCH_HAS_DMA_MAP_DIRECT config option to make the arch_xxxx
hooks no-op by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When eswitch manager is running on ECPF, host PF should be treated
as non eswitch manager port, similar to other VF vports.
Fail to do so, results in firmware treating PF's vport as ECPF
vport for eswitch ACL tables.
Non zero check to figure out if a given vport is other vport or not
is not sufficient becase PF vport number = 0 on ECPF.
Hence, create esw acl tables with an attribute of other vport.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To match the hardware spec, rename peer_pf to host_pf.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Subsequent patch implements helper API which has mlx5_core_dev
as const pointer, make its caller API too const *.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose other function ifc bits to enable setting HCA caps on behalf of
other function.
In addition, expose vhca_resource_manager bit to control whether the
other function functionality is supported by firmware.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose FW indication that it supports stateless offloads for IP over IP
tunneled packets per direction. In some HW like ConnectX-4 IP-in-IP
support is not symmetric, it supports steering on the inner header but
it doesn't TX-Checksum and TSO. Add IP-in-IP capability per direction to
cover this case as well.
Note: only if both indications are turned on, the global
tunnel_stateless_ip_over_ip is on too.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Update the hardware interface definitions to query and modify vhca
state, related EQE and event code.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5 command init and cleanup routines are internal to mlx5_core driver.
Hence, avoid exporting them and move their definition to mlx5_core
driver's internal file mlx5_core.h
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add a bit in HCA capabilities layout to indicate if ts_cqe_to_dest_cqn is
supported.
In addition, add ts_cqe_to_dest_cqn field to SQ context, for driver to
set the actual CQN.
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add misc4 match params to enable matching on prog_sample_fields.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The flow sampler object is a new destination type. Add a new member
for the flow destination.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Hardware introduces flow sampler object for packet sampling.
Add the offload hardware bits and structures.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is a bigger work from Dmitry Osipenko around Tegra SoC memory
controller drivers, mostly towards adding interconnect support and
integration with devfreq. This work touches all Tegra memory controller
drivers and also few other SoC-related parts. It's not yet finished but
the intermediate stage seems ready to merge.
Beside that Tegra 210 memory controller got few fixes and received new
swgroups (work of Nicolin Chen).
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl+/7OAQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD13eMD/9c/fpOEvhAGFj6y0YqJRpmfssb2oLhLbh+
CFjx3TryF7mniYd/Z9uSmEDj4rNgRmpvIcfPkzSbwh13mawKHJbmnIyisKA2/0iE
tQO2DagG3sCitPMgVQ1rU7S0YcUngTrfN3F6P8chgE5ZvN9AejGUSbMNczvv1WF2
5ivNEUHKl6wi0M/uXZFtT0dQ54S385nlsDI07o+p2REefNvQfHSL3DMMORDXyiPu
oGcSYQLlRgS1A5TpYbws3PP4Kz7sqW241FI07Nnp1pucLHVTryx8VjLS17GiFEvc
FAe9IkgBe3AdptsbIT81uOwMsICYFaqUwxdMVqxEBsMr/Qr1iu5kYixTNqMFNuct
lyYDXA2XJd/KdEAJ69SRtH5bvfDmfJvg7AkwyXkims5zYt75vIec1DqqHhaXomLx
DAMu+0nbp/uJxuGL3La0LXe32Ooabfvb9uAlgNG/++mEmYrDhDC605PortTVLwG0
W/HNe9Fu5dbCDilylVUwsLNy3ehA7VRA9BqB5BMWHe9Xl4Bcbns4Nl3LDunCXePq
GUv/yNMqf/BDj6lbcCQRSYmVayAEHrw1MrVBj3epOg81DhwpYhDF7uSJgQ349MOV
Twc8Ze+iY7fBJhAaPAkJsy+wAARrXKtbs7OCSEdoE9dJWPtPOIFRerZy7OBYdijj
uiU8iM+TJQ==
=EUPM
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-tegra-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.11 - Tegra SoC
There is a bigger work from Dmitry Osipenko around Tegra SoC memory
controller drivers, mostly towards adding interconnect support and
integration with devfreq. This work touches all Tegra memory controller
drivers and also few other SoC-related parts. It's not yet finished but
the intermediate stage seems ready to merge.
Beside that Tegra 210 memory controller got few fixes and received new
swgroups (work of Nicolin Chen).
* tag 'memory-controller-drv-tegra-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (38 commits)
memory: tegra30-emc: Remove unnecessary of_node_put in tegra_emc_probe
memory: tegra: Complete tegra210_swgroups
memory: tegra30-emc: Continue probing if timings are missing in device-tree
memory: tegra30-emc: Make driver modular
memory: tegra30: Add FIFO sizes to memory clients
memory: tegra20-emc: Add devfreq support
memory: tegra20-emc: Remove IRQ number from error message
memory: tegra20-emc: Factor out clk initialization
memory: tegra20-emc: Use dev_pm_opp_set_clkname()
memory: tegra: Correct stub of devm_tegra_memory_controller_get()
memory: tegra20: Support interconnect framework
memory: tegra20-emc: Continue probing if timings are missing in device-tree
memory: tegra20-emc: Make driver modular
memory: tegra-mc: Add interconnect framework
memory: tegra: Add missing latency allowness entry for Page Table Cache
memory: tegra: Remove superfluous error messages around platform_get_irq()
memory: tegra: Use devm_platform_ioremap_resource()
memory: tegra: Add and use devm_tegra_memory_controller_get()
dt-bindings: host1x: Document new interconnect properties
dt-bindings: tegra30-actmon: Document OPP and interconnect properties
...
Link: https://lore.kernel.org/r/20201126191241.23302-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The MIPI SoundWire Device Class standard will define audio functionality
beyond the scope of the existing SoundWire 1.2 standard, which is limited
to the bus and interface.
The description is inspired by the USB Audio Class, with "functions",
"entities", "control selectors", "audio clusters". The main difference
with the USB Audio class is that the devices are typically on a motherboard
and descriptors stored in platform firmware instead of being retrieved
from the device.
The current set of devices managed in this patchset are conformant with the
SDCA 0.6 specification and require dedicated drivers since the descriptors
and platform firmware specification is not complete at this time. They do
however rely on the hierarchical addressing required by the SDCA standard.
Future devices conformant with SDCA 1.0 should rely on a class driver.
This series adds support for the hierarchical SDCA addressing and extends
regmap. It then provides 3 codecs for RT711-sdca headset codec, RT1316
amplifier and RT715-scda microphone codec.
Note that the release of this code before the formal adoption of the
SDCA 1.0 specification was formally endorsed by the MIPI Board to make
sure there is no delay for Linux-based support of this specification.
Jack Yu (1):
ASoC/SoundWire: rt715-sdca: First version of rt715 sdw sdca codec
driver
Pierre-Louis Bossart (2):
soundwire: SDCA: add helper macro to access controls
regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ
Shuming Fan (2):
ASoC/SoundWire: rt1316: Add RT1316 SDCA vendor-specific driver
ASoC/SoundWire: rt711-sdca: Add RT711 SDCA vendor-specific driver
drivers/base/regmap/Kconfig | 6 +-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-sdw-mbq.c | 101 ++
include/linux/regmap.h | 35 +
include/linux/soundwire/sdw_registers.h | 32 +
sound/soc/codecs/Kconfig | 20 +
sound/soc/codecs/Makefile | 6 +
sound/soc/codecs/rt1316-sdw.c | 756 ++++++++++++
sound/soc/codecs/rt1316-sdw.h | 115 ++
sound/soc/codecs/rt711-sdca-sdw.c | 424 +++++++
sound/soc/codecs/rt711-sdca-sdw.h | 101 ++
sound/soc/codecs/rt711-sdca.c | 1481 +++++++++++++++++++++++
sound/soc/codecs/rt711-sdca.h | 246 ++++
sound/soc/codecs/rt715-sdca-sdw.c | 278 +++++
sound/soc/codecs/rt715-sdca-sdw.h | 170 +++
sound/soc/codecs/rt715-sdca.c | 936 ++++++++++++++
sound/soc/codecs/rt715-sdca.h | 124 ++
17 files changed, 4831 insertions(+), 1 deletion(-)
create mode 100644 drivers/base/regmap/regmap-sdw-mbq.c
create mode 100644 sound/soc/codecs/rt1316-sdw.c
create mode 100644 sound/soc/codecs/rt1316-sdw.h
create mode 100644 sound/soc/codecs/rt711-sdca-sdw.c
create mode 100644 sound/soc/codecs/rt711-sdca-sdw.h
create mode 100644 sound/soc/codecs/rt711-sdca.c
create mode 100644 sound/soc/codecs/rt711-sdca.h
create mode 100644 sound/soc/codecs/rt715-sdca-sdw.c
create mode 100644 sound/soc/codecs/rt715-sdca-sdw.h
create mode 100644 sound/soc/codecs/rt715-sdca.c
create mode 100644 sound/soc/codecs/rt715-sdca.h
base-commit: 3650b228f8
--
2.17.1
Correct typo in a stub of devm_tegra_memory_controller_get() to fix a
non-ARM kernel compile-testing.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201111011456.7875-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add common SoC-agnostic ICC framework which turns Tegra Memory Controller
into a memory interconnection provider. This allows us to use interconnect
API for tuning of memory configurations.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Link: https://lore.kernel.org/r/20201104164923.21238-33-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Multiple Tegra drivers need to retrieve Memory Controller and there is
duplication of the retrieval code among the drivers.
Add new devm_tegra_memory_controller_get() helper to remove the code's
duplication and to fix put_device() which was missed in the duplicated
code. Make EMC drivers to use the new helper.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201104164923.21238-29-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
0day reported one -22.7% regression for will-it-scale page_fault2
case [1] on a 4 sockets 144 CPU platform, and bisected to it to be
caused by Waiman's optimization (commit bd0b230fe1) of saving one
'struct page_counter' space for 'struct mem_cgroup'.
Initially we thought it was due to the cache alignment change introduced
by the patch, but further debug shows that it is due to some hot data
members ('vmstats_local', 'vmstats_percpu', 'vmstats') sit in 2 adjacent
cacheline (2N and 2N+1 cacheline), and when adjacent cache line prefetch
is enabled, it triggers an "extended level" of cache false sharing for
2 adjacent cache lines.
So exchange the 2 member blocks, while keeping mostly the original
cache alignment, which can restore and even enhance the performance,
and save 64 bytes of space for 'struct mem_cgroup' (from 2880 to 2816,
with 0day's default RHEL-8.3 kernel config)
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Fixes: bd0b230fe1 ("mm/memcg: unify swap and memsw page counters")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-Top Box
used by O2.cz. This keymap adds support for the default IR controls.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>