expand sched_list definition for better understanding.
Also fix a typo atleast -> at least
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull networking fixes from David Miller:
1) Fix non-blocking connect() in x25, from Martin Schiller.
2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.
3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.
4) Limit size of TSO packets properly in lan78xx driver, from Eric
Dumazet.
5) r8152 probe needs an endpoint sanity check, from Johan Hovold.
6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
John Fastabend.
7) hns3 needs short frames padded on transmit, from Yunsheng Lin.
8) Fix netfilter ICMP header corruption, from Eyal Birger.
9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.
10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.
11) Fix memory leak in act_ctinfo, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: reject overlapped queues in TC-MQPRIO offload
cxgb4: fix Tx multi channel port rate limit
net: sched: act_ctinfo: fix memory leak
bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
bnxt_en: Fix ipv6 RFS filter matching logic.
bnxt_en: Fix NTUPLE firmware command failures.
net: systemport: Fixed queue mapping in internal ring map
net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
net: hns: fix soft lockup when there is not enough memory
net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
net/sched: act_ife: initalize ife->metalist earlier
netfilter: nat: fix ICMP header corruption on ICMP errors
net: wan: lapbether.c: Use built-in RCU list checking
netfilter: nf_tables: fix flowtable list del corruption
netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
netfilter: nft_tunnel: ERSPAN_VERSION must not be null
netfilter: nft_tunnel: fix null-attribute check
...
core mst:
- serialize down messages and clear timeslots are on unplug
amdgpu:
- Update golden settings for renoir
- eDP fix
i915:
- uAPI fix: Remove dash and colon from PMU names to comply with tools/perf
- Fix for include file that was indirectly included
- Two fixes to make sure VMA are marked active for error capture
virtio:
- maintain obj reservation lock when submitting cmds
rockchip:
- increase link rate var size to accommodate rates
-----BEGIN PGP SIGNATURE-----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=Vwa3
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Back from LCA2020, fixes wasn't too busy last week, seems to have
quieten down appropriately, some amdgpu, i915, then a core mst fix and
one fix for virtio-gpu and one for rockchip:
core mst:
- serialize down messages and clear timeslots are on unplug
amdgpu:
- Update golden settings for renoir
- eDP fix
i915:
- uAPI fix: Remove dash and colon from PMU names to comply with
tools/perf
- Fix for include file that was indirectly included
- Two fixes to make sure VMA are marked active for error capture
virtio:
- maintain obj reservation lock when submitting cmds
rockchip:
- increase link rate var size to accommodate rates"
* tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Reorder detect_edp_sink_caps before link settings read.
drm/amdgpu: update goldensetting for renoir
drm/dp_mst: Have DP_Tx send one msg at a time
drm/dp_mst: clear time slots for ports invalid
drm/i915/pmu: Do not use colons or dashes in PMU names
drm/rockchip: fix integer type used for storing dp data rate
drm/i915/gt: Mark ring->vma as active while pinned
drm/i915/gt: Mark context->state vma as active while pinned
drm/i915/gt: Skip trying to unbind in restore_ggtt_mappings
drm/i915: Add missing include file <linux/math64.h>
drm/virtio: add missing virtio_gpu_array_lock_resv call
Pull rseq fixes from Ingo Molnar:
"Two rseq bugfixes:
- CLONE_VM !CLONE_THREAD didn't work properly, the kernel would end
up corrupting the TLS of the parent. Technically a change in the
ABI but the previous behavior couldn't resonably have been relied
on by applications so this looks like a valid exception to the ABI
rule.
- Make the RSEQ_FLAG_UNREGISTER ABI behavior consistent with the
handling of other flags. This is not thought to impact any
applications either"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Unregister rseq for clone CLONE_VM
rseq: Reject unknown flags on rseq unregister
amd-drm-next-5.6-2020-01-17:
amdgpu:
- Fix 32 bit harder
- Powerplay cleanups
- VCN fixes for Arcturus
- RAS fixes
- eDP/DP fixes
- SR-IOV fixes
- Re-enable S/G display for PCO/RV2
- Free stolen memory after init on gmc10
- DF hashing optimizations for Arcturus
- Properly handle runtime pm in sysfs and debugfs
- Unify more GC programming between amdgpu and amdkfd
- Golden settings updates for gfx10
- GDDR6 training fixes
- Freesync fixes
- DSC fixes
- TMDS fixes
- Renoir USB-C fixes
- DC dml updates from hw team
- Pollock support
- Mutex init regresson fix
amdkfd:
- Unify more GC programming between amdgpu and amdkfd
- Use KIQ to setup HIQ rather than using MMIO
scheduler:
- Documentation fixes
- Improve job distribution with load sharing
drm:
- DP MST fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117213625.4722-1-alexander.deucher@amd.com
rockchip: increase link rate var size to accommodate rates (Tobias)
mst: serialize down messages and clear timeslots are on unplug (Wayne)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tobias Schramm <t.schramm@manjaro.org>
Cc: Wayne Lin <Wayne.Lin@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl4gjvAACgkQcywAJXLc
r3knlgf8C0szUNBmHkmwuAivHLJz6XHKCtGSfPrZ3M67KDwU563BRXlzHEA3/q7p
L3+RUW9CrohyMWA51fbmNJOR54mpy0zAu2ejLFll0Ntcw5CBbiYQ2ToBMmhW56h9
lM2EDkD0stx/JYmumpU6Vc8o0CG3asiJsU7IfQZ4n2kXqboyHho+E74qri52aPtD
ZZfXLmI9Yju8j0x0AjkZWxC6gfNWXH/HEnsC9X86JF+QXcnw5cVeHvi43doPjvs/
sZQCeaRAhseJXpAPaiBhVemF8+jkwX2CZ0sggxZZP9BB26PEwonqWHj9ixQlYLyD
bVC4Wson59D/0W1QK4R/AADpIO80IQ==
=iVHE
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-01-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
virtio: maintain obj reservation lock when submitting cmds (Gerd)
rockchip: increase link rate var size to accommodate rates (Tobias)
mst: serialize down messages and clear timeslots are on unplug (Wayne)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tobias Schramm <t.schramm@manjaro.org>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116162856.GA11524@art_vandelay
-----BEGIN PGP SIGNATURE-----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=f1JW
-----END PGP SIGNATURE-----
Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes that should go into this release:
- The 32-bit segment size fix that I mentioned last week (Ming)
- Use uint for the block size (Mikulas)
- A null_blk zone write handling fix (Damien)"
* tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
block: fix an integer overflow in logical block size
null_blk: Fix zone write handling
block: fix get_max_segment_size() overflow on 32bit arch
I've been sitting on these longer than I meant, so the patch count is
a bit higher than ideal for this part of the release. There's also some
reverts of double-applied patches that brings the diffstat up a bit.
With that said, the biggest changes are:
- Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees.
- Move of two device nodes that got applied to the wrong part of the
tree on ASpeed G6.
- Regulator fix for Beaglebone X15 (adding 12/5V supplies)
- Use interrupts for keys on Amlogic SM1 to avoid missed polls
In addition to that, there is a collection of smaller DT fixes:
- Power supply assignment fixes for i.MX6
- Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
- Build fixlets (selects) for davinci/omap2+
- More interrupt number fixes for Stratix10, Amlogic SM1, etc.
- ... and more similar fixes across different platforms
And some non-DT stuff:
- optee fix to register multiple shared pages properly
- Clock calculation fixes for MMP3
- Clock fixes for OMAP as well
-----BEGIN PGP SIGNATURE-----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=MMJu
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I've been sitting on these longer than I meant, so the patch count is
a bit higher than ideal for this part of the release. There's also
some reverts of double-applied patches that brings the diffstat up a
bit.
With that said, the biggest changes are:
- Revert of duplicate i2c device addition on two Aspeed (BMC)
Devicetrees.
- Move of two device nodes that got applied to the wrong part of the
tree on ASpeed G6.
- Regulator fix for Beaglebone X15 (adding 12/5V supplies)
- Use interrupts for keys on Amlogic SM1 to avoid missed polls
In addition to that, there is a collection of smaller DT fixes:
- Power supply assignment fixes for i.MX6
- Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
- Build fixlets (selects) for davinci/omap2+
- More interrupt number fixes for Stratix10, Amlogic SM1, etc.
- ... and more similar fixes across different platforms
And some non-DT stuff:
- optee fix to register multiple shared pages properly
- Clock calculation fixes for MMP3
- Clock fixes for OMAP as well"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
ARM: omap2plus: select RESET_CONTROLLER
ARM: davinci: select CONFIG_RESET_CONTROLLER
ARM: dts: aspeed: rainier: Fix fan fault and presence
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed-g6: Fix FSI master location
ARM: dts: mmp3: Fix the TWSI ranges
clk: mmp2: Fix the order of timer mux parents
ARM: mmp: do not divide the clock rate
arm64: dts: rockchip: Fix IR on Beelink A1
optee: Fix multi page dynamic shm pool alloc
...
This also replaces old artifacts with a correct one in drm_sched_entity_init()
declaration
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch uses score based logic to select a new rq for better
loadbalance between multiple rq/scheds instead of num_jobs.
Below are test results after running amdgpu_test from mesa drm
Before this patch:
sched_name num of many times it got scheduled
========= ==================================
sdma0 314
sdma1 32
comp_1.0.0 56
comp_1.0.1 0
comp_1.1.0 0
comp_1.1.1 0
comp_1.2.0 0
comp_1.2.1 0
comp_1.3.0 0
comp_1.3.1 0
After this patch:
sched_name num of many times it got scheduled
========= ==================================
sdma0 216
sdma1 185
comp_1.0.0 39
comp_1.0.1 9
comp_1.1.0 12
comp_1.1.1 0
comp_1.2.0 12
comp_1.2.1 0
comp_1.3.0 12
comp_1.3.1 0
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Borkmann says:
====================
pull-request: bpf 2020-01-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 95 insertions(+), 43 deletions(-).
The main changes are:
1) Fix refcount leak for TCP time wait and request sockets for socket lookup
related BPF helpers, from Lorenz Bauer.
2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann.
3) Batch of several sockmap and related TLS fixes found while operating
more complex BPF programs with Cilium and OpenSSL, from John Fastabend.
4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue()
to avoid purging data upon teardown, from Lingpeng Chen.
5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly
dump a BPF map's value with BTF, from Martin KaFai Lau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Logical block size has type unsigned short. That means that it can be at
most 32768. However, there are architectures that can run with 64k pages
(for example arm64) and on these architectures, it may be possible to
create block devices with 64k block size.
For exmaple (run this on an architecture with 64k pages):
Mount will fail with this error because it tries to read the superblock using 2-sector
access:
device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536
EXT4-fs (dm-0): unable to read superblock
This patch changes the logical block size from unsigned short to unsigned
int to avoid the overflow.
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When sockmap sock with TLS enabled is removed we cleanup bpf/psock state
and call tcp_update_ulp() to push updates to TLS ULP on top. However, we
don't push the write_space callback up and instead simply overwrite the
op with the psock stored previous op. This may or may not be correct so
to ensure we don't overwrite the TLS write space hook pass this field to
the ULP and have it fixup the ctx.
This completes a previous fix that pushed the ops through to the ULP
but at the time missed doing this for write_space, presumably because
write_space TLS hook was added around the same time.
Fixes: 95fa145479 ("bpf: sockmap/tls, close can race with map free")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-4-john.fastabend@gmail.com
When a sockmap is free'd and a socket in the map is enabled with tls
we tear down the bpf context on the socket, the psock struct and state,
and then call tcp_update_ulp(). The tcp_update_ulp() call is to inform
the tls stack it needs to update its saved sock ops so that when the tls
socket is later destroyed it doesn't try to call the now destroyed psock
hooks.
This is about keeping stacked ULPs in good shape so they always have
the right set of stacked ops.
However, recently unhash() hook was removed from TLS side. But, the
sockmap/bpf side is not doing any extra work to update the unhash op
when is torn down instead expecting TLS side to manage it. So both
TLS and sockmap believe the other side is managing the op and instead
no one updates the hook so it continues to point at tcp_bpf_unhash().
When unhash hook is called we call tcp_bpf_unhash() which detects the
psock has already been destroyed and calls sk->sk_prot_unhash() which
calls tcp_bpf_unhash() yet again and so on looping and hanging the core.
To fix have sockmap tear down logic fixup the stale pointer.
Fixes: 5d92e631b8 ("net/tls: partially revert fix transition through disconnect with close")
Reported-by: syzbot+83979935eb6304f8cd46@syzkaller.appspotmail.com
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-2-john.fastabend@gmail.com
[Why]
Noticed this while testing MST with the 4 ports MST hub from
StarTech.com. Sometimes can't light up monitors normally and get the
error message as 'sideband msg build failed'.
Look into aux transactions, found out that source sometimes will send
out another down request before receiving the down reply of the
previous down request. On the other hand, in drm_dp_get_one_sb_msg(),
current code doesn't handle the interleaved replies case. Hence, source
can't build up message completely and can't light up monitors.
[How]
For good compatibility, enforce source to send out one down request at a
time. Add a flag, is_waiting_for_dwn_reply, to determine if the source
can send out a down request immediately or not.
- Check the flag before calling process_single_down_tx_qlock to send out
a msg
- Set the flag when successfully send out a down request
- Clear the flag when successfully build up a down reply
- Clear the flag when find erros during sending out a down request
- Clear the flag when find errors during building up a down reply
- Clear the flag when timeout occurs during waiting for a down reply
- Use drm_dp_mst_kick_tx() to try to send another down request in queue
at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages
in queue when errors occur)
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113093649.11755-1-Wayne.Lin@amd.com
Anatoly has been fuzzing with kBdysch harness and reported a hang in one
of the outcomes:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (85) call bpf_get_socket_cookie#46
1: R0_w=invP(id=0) R10=fp0
1: (57) r0 &= 808464432
2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
2: (14) w0 -= 810299440
3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
3: (c4) w0 s>>= 1
4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
4: (76) if w0 s>= 0x30303030 goto pc+216
221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
221: (95) exit
processed 6 insns (limit 1000000) [...]
Taking a closer look, the program was xlated as follows:
# ./bpftool p d x i 12
0: (85) call bpf_get_socket_cookie#7800896
1: (bf) r6 = r0
2: (57) r6 &= 808464432
3: (14) w6 -= 810299440
4: (c4) w6 s>>= 1
5: (76) if w6 s>= 0x30303030 goto pc+216
6: (05) goto pc-1
7: (05) goto pc-1
8: (05) goto pc-1
[...]
220: (05) goto pc-1
221: (05) goto pc-1
222: (95) exit
Meaning, the visible effect is very similar to f54c7898ed ("bpf: Fix
precision tracking for unbounded scalars"), that is, the fall-through
branch in the instruction 5 is considered to be never taken given the
conclusion from the min/max bounds tracking in w6, and therefore the
dead-code sanitation rewrites it as goto pc-1. However, real-life input
disagrees with verification analysis since a soft-lockup was observed.
The bug sits in the analysis of the ARSH. The definition is that we shift
the target register value right by K bits through shifting in copies of
its sign bit. In adjust_scalar_min_max_vals(), we do first coerce the
register into 32 bit mode, same happens after simulating the operation.
However, for the case of simulating the actual ARSH, we don't take the
mode into account and act as if it's always 64 bit, but location of sign
bit is different:
dst_reg->smin_value >>= umin_val;
dst_reg->smax_value >>= umin_val;
dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val);
Consider an unknown R0 where bpf_get_socket_cookie() (or others) would
for example return 0xffff. With the above ARSH simulation, we'd see the
following results:
[...]
1: R1=ctx(id=0,off=0,imm=0) R2_w=invP65535 R10=fp0
1: (85) call bpf_get_socket_cookie#46
2: R0_w=invP(id=0) R10=fp0
2: (57) r0 &= 808464432
-> R0_runtime = 0x3030
3: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
3: (14) w0 -= 810299440
-> R0_runtime = 0xcfb40000
4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
(0xffffffff)
4: (c4) w0 s>>= 1
-> R0_runtime = 0xe7da0000
5: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
(0x67c00000) (0x7ffbfff8)
[...]
In insn 3, we have a runtime value of 0xcfb40000, which is '1100 1111 1011
0100 0000 0000 0000 0000', the result after the shift has 0xe7da0000 that
is '1110 0111 1101 1010 0000 0000 0000 0000', where the sign bit is correctly
retained in 32 bit mode. In insn4, the umax was 0xffffffff, and changed into
0x7ffbfff8 after the shift, that is, '0111 1111 1111 1011 1111 1111 1111 1000'
and means here that the simulation didn't retain the sign bit. With above
logic, the updates happen on the 64 bit min/max bounds and given we coerced
the register, the sign bits of the bounds are cleared as well, meaning, we
need to force the simulation into s32 space for 32 bit alu mode.
Verification after the fix below. We're first analyzing the fall-through branch
on 32 bit signed >= test eventually leading to rejection of the program in this
specific case:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r2 = 808464432
1: R1=ctx(id=0,off=0,imm=0) R2_w=invP808464432 R10=fp0
1: (85) call bpf_get_socket_cookie#46
2: R0_w=invP(id=0) R10=fp0
2: (bf) r6 = r0
3: R0_w=invP(id=0) R6_w=invP(id=0) R10=fp0
3: (57) r6 &= 808464432
4: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
4: (14) w6 -= 810299440
5: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
5: (c4) w6 s>>= 1
6: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0
(0x67c00000) (0xfffbfff8)
6: (76) if w6 s>= 0x30303030 goto pc+216
7: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0
7: (30) r0 = *(u8 *)skb[808464432]
BPF_LD_[ABS|IND] uses reserved fields
processed 8 insns (limit 1000000) [...]
Fixes: 9cbe1f5a32 ("bpf/verifier: improve register value range tracking with ARSH")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115204733.16648-1-daniel@iogearbox.net
Pull vfs fixes from Al Viro:
"Fixes for mountpoint_last() bugs (by converting to use of
lookup_last()) and an autofs regression fix from this cycle (caused by
follow_managed() breakage introduced in barrier fixes series)"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix autofs regression caused by follow_managed() changes
reimplement path_mountpoint() with less magic
* -O3 enablement fallout, thanks to Arnd who ran this
* fixes for a few leaks, thanks to Felix
* channel 12 regulatory fix for custom regdomains
* check for a crash reported by syzbot
(NULL function is called on drivers that don't have it)
* fix TKIP replay protection after setup with some APs
(from Jouni)
* restrict obtaining some mesh data to avoid WARN_ONs
* fix deadlocks with auto-disconnect (socket owner)
* fix radar detection events with multiple devices
-----BEGIN PGP SIGNATURE-----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=i20C
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2020-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A few fixes:
* -O3 enablement fallout, thanks to Arnd who ran this
* fixes for a few leaks, thanks to Felix
* channel 12 regulatory fix for custom regdomains
* check for a crash reported by syzbot
(NULL function is called on drivers that don't have it)
* fix TKIP replay protection after setup with some APs
(from Jouni)
* restrict obtaining some mesh data to avoid WARN_ONs
* fix deadlocks with auto-disconnect (socket owner)
* fix radar detection events with multiple devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case a radar event of CAC_FINISHED or RADAR_DETECTED
happens during another phy is during CAC we might need
to cancel that CAC.
If we got a radar in a channel that another phy is now
doing CAC on then the CAC should be canceled there.
If, for example, 2 phys doing CAC on the same channels,
or on comptable channels, once on of them will finish his
CAC the other might need to cancel his CAC, since it is no
longer relevant.
To fix that the commit adds an callback and implement it in
mac80211 to end CAC.
This commit also adds a call to said callback if after a radar
event we see the CAC is no longer relevant
Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com
[slightly reformat/reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Final drm/i915 features for v5.6:
- DP MST fixes (José)
- Fix intel_bw_state memory leak (Pankaj Bharadiya)
- Switch context id allocation to xarray (Tvrtko)
- ICL/EHL/TGL workarounds (Matt Roper, Tvrtko)
- Debugfs for LMEM details (Lukasz Fiedorowicz)
- Prefer platform acronyms over codenames in symbols (Lucas)
- Tiled and port sync mode fixes for fbdev and DP (Manasi)
- DSI panel and backlight enable GPIO fixes (Hans de Goede)
- Relax audio min CDCLK requirements on non-GLK (Kai Vehmanen)
- Plane alignment and dimension check fixes (Imre)
- Fix state checks for PSR (José)
- Remove ICL+ clock gating programming (José)
- Static checker fixes around bool usage (Ma Feng)
- Bring back tests for self-contained headers in i915 (Masahiro Yamada)
- Fix DP MST disable sequence (Ville)
- Start converting i915 to the new drm device based logging macros (Wambui Karuga)
- Add DSI VBT I2C sequence execution (Vivek Kasireddy)
- Start using function pointers and ops structs in uc code (Michal)
- Fix PMU names to not use colons or dashes (Tvrtko)
- TGL media decompression support (DK, Imre)
- Split i915_gem_gtt.[ch] to more manageable chunks (Matthew Auld)
- Create dumb buffers in LMEM where available (Ram)
- Extend mmap support for LMEM (Abdiel)
- Selftest updates (Chris)
- Hack bump up CDCLK on TGL to avoid underruns (Stan)
- Use intel_encoder and intel_connector more instead of drm counterparts (Ville)
- Build error fixes (Zhang Xiaoxu)
- Fixes related to GPU and engine initialization/resume (Chris)
- Support for prefaulting discontiguous objects (Abdiel)
- Support discontiguous LMEM object maps (Chris)
- Various GEM and GT improvements and fixes (Chris)
- Merge pinctrl dependencies branch for the DSI GPIO updates (Jani)
- Backmerge drm-next for new logging macros (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgkil0v9.fsf@intel.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BXQH
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.6' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
Mediatek DRM Next for Linux 5.6
This fix non-smooth cursor problem, add cmdq support, add ctm property
support and some refinement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578972526.14594.8.camel@mtksdaap41
... and get rid of a bunch of bugs in it. Background:
the reason for path_mountpoint() is that umount() really doesn't
want attempts to revalidate the root of what it's trying to umount.
The thing we want to avoid actually happen from complete_walk();
solution was to do something parallel to normal path_lookupat()
and it both went overboard and got the boilerplate subtly
(and not so subtly) wrong.
A better solution is to do pretty much what the normal path_lookupat()
does, but instead of complete_walk() do unlazy_walk(). All it takes
to avoid that ->d_weak_revalidate() call... mountpoint_last() goes
away, along with everything it got wrong, and so does the magic around
LOOKUP_NO_REVAL.
Another source of bugs is that when we traverse mounts at the final
location (and we need to do that - umount . expects to get whatever's
overmounting ., if any, out of the lookup) we really ought to take
care of ->d_manage() - as it is, manual umount of autofs automount
in progress can lead to unpleasant surprises for the daemon. Easily
solved by using handle_lookup_down() instead of follow_mount().
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This contains a small set of mostly fixes and some minor improvements.
-----BEGIN PGP SIGNATURE-----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=OBEv
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.6-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.6-rc1
This contains a small set of mostly fixes and some minor improvements.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200111004835.2412858-1-thierry.reding@gmail.com
Here are two bugfixes from Mike Rapoport, both fixing
compile-time errors for the nds32 architecture that
were recently introduced.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ZMNN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull asm-generic fixes from Arnd Bergmann:
"Here are two bugfixes from Mike Rapoport, both fixing compile-time
errors for the nds32 architecture that were recently introduced"
* tag 'asm-generic-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
nds32: fix build failure caused by page table folding updates
asm-generic/nds32: don't redefine cacheflush primitives
Merge misc fixes from David Howells.
Two afs fixes and a key refcounting fix.
* dhowells:
afs: Fix afs_lookup() to not clobber the version on a new dentry
afs: Fix use-after-loss-of-ref
keys: Fix request_key() cache
afs_lookup() has a tracepoint to indicate the outcome of
d_splice_alias(), passing it the inode to retrieve the fid from.
However, the function gave up its ref on that inode when it called
d_splice_alias(), which may have failed and dropped the inode.
Fix this by caching the fid.
Fixes: 80548b0399 ("afs: Add more tracepoints")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 99cb0dbd47 ("mm,thp: add read-only THP support for (non-shmem)
FS") introduced a new khugepaged scan result: SCAN_PAGE_HAS_PRIVATE, but
the corresponding description for trace events were not added.
Link: http://lkml.kernel.org/r/1574793844-2914-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: 99cb0dbd47 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 96a2b03f28 ("mm, debug_pagelloc: use static keys to enable
debugging") has introduced a static key to reduce overhead when
debug_pagealloc is compiled in but not enabled. It relied on the
assumption that jump_label_init() is called before parse_early_param()
as in start_kernel(), so when the "debug_pagealloc=on" option is parsed,
it is safe to enable the static key.
However, it turns out multiple architectures call parse_early_param()
earlier from their setup_arch(). x86 also calls jump_label_init() even
earlier, so no issue was found while testing the commit, but same is not
true for e.g. ppc64 and s390 where the kernel would not boot with
debug_pagealloc=on as found by our QA.
To fix this without tricky changes to init code of multiple
architectures, this patch partially reverts the static key conversion
from 96a2b03f28. Init-time and non-fastpath calls (such as in arch
code) of debug_pagealloc_enabled() will again test a simple bool
variable. Fastpath mm code is converted to a new
debug_pagealloc_enabled_static() variant that relies on the static key,
which is enabled in a well-defined point in mm_init() where it's
guaranteed that jump_label_init() has been called, regardless of
architecture.
[sfr@canb.auug.org.au: export _debug_pagealloc_enabled_early]
Link: http://lkml.kernel.org/r/20200106164944.063ac07b@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191219130612.23171-1-vbabka@suse.cz
Fixes: 96a2b03f28 ("mm, debug_pagelloc: use static keys to enable debugging")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently slab percpu vmstats are flushed twice: during the memcg
offlining and just before freeing the memcg structure. Each time percpu
counters are summed, added to the atomic counterparts and propagated up
by the cgroup tree.
The second flushing is required due to how recursive vmstats are
implemented: counters are batched in percpu variables on a local level,
and once a percpu value is crossing some predefined threshold, it spills
over to atomic values on the local and each ascendant levels. It means
that without flushing some numbers cached in percpu variables will be
dropped on floor each time a cgroup is destroyed. And with uptime the
error on upper levels might become noticeable.
The first flushing aims to make counters on ancestor levels more
precise. Dying cgroups may resume in the dying state for a long time.
After kmem_cache reparenting which is performed during the offlining
slab counters of the dying cgroup don't have any chances to be updated,
because any slab operations will be performed on the parent level. It
means that the inaccuracy caused by percpu batching will not decrease up
to the final destruction of the cgroup. By the original idea flushing
slab counters during the offlining should minimize the visible
inaccuracy of slab counters on the parent level.
The problem is that percpu counters are not zeroed after the first
flushing. So every cached percpu value is summed twice. It creates a
small error (up to 32 pages per cpu, but usually less) which accumulates
on parent cgroup level. After creating and destroying of thousands of
child cgroups, slab counter on parent level can be way off the real
value.
For now, let's just stop flushing slab counters on memcg offlining. It
can't be done correctly without scheduling a work on each cpu: reading
and zeroing it during css offlining can race with an asynchronous
update, which doesn't expect values to be changed underneath.
With this change, slab counters on parent level will become eventually
consistent. Once all dying children are gone, values are correct. And
if not, the error is capped by 32 * NR_CPUS pages per dying cgroup.
It's not perfect, as slab are reparented, so any updates after the
reparenting will happen on the parent level. It means that if a slab
page was allocated, a counter on child level was bumped, then the page
was reparented and freed, the annihilation of positive and negative
counter values will not happen until the child cgroup is released. It
makes slab counters different from others, and it might want us to
implement flushing in a correct form again. But it's also a question of
performance: scheduling a work on each cpu isn't free, and it's an open
question if the benefit of having more accurate counters is worth it.
We might also consider flushing all counters on offlining, not only slab
counters.
So let's fix the main problem now: make the slab counters eventually
consistent, so at least the error won't grow with uptime (or more
precisely the number of created and destroyed cgroups). And think about
the accuracy of counters separately.
Link: http://lkml.kernel.org/r/20191220042728.1045881-1-guro@fb.com
Fixes: bee07b33db ("mm: memcontrol: flush percpu slab vmstats on kmem offlining")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
UAPI Changes:
Cross-subsystem Changes:
- Convert simple panel bindings to a template.
Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.
Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.
-----BEGIN PGP SIGNATURE-----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=P/VK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
Cross-subsystem Changes:
- Convert simple panel bindings to a template.
Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.
Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8d4944-68d7-0df3-f39b-31f6fba22a2a@linux.intel.com
Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather than
when they aren't present
- Move the header files associated with the SiFive L2 cache controller
to drivers/soc (where the code was recently moved)
-----BEGIN PGP SIGNATURE-----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=qvPe
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather
than when they aren't present
- Move the header files associated with the SiFive L2 cache
controller to drivers/soc (where the code was recently moved)"
* tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup obvious bug for fp-regs reset
riscv: move sifive_l2_cache.h to include/soc
The commit 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
moves the sifive L2 cache driver to driver/soc. It did not move the
header file along with the driver. Therefore this patch moves the header
file to driver/soc
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to fix the include guard]
Fixes: 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The function to obtain a unique snapshot id was mistakenly typo'd as
devlink_region_shapshot_id_get. Fix this typo by renaming the function
and all of its users.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=1bsG
-----END PGP SIGNATURE-----
Merge tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this round.
This pull request contains two NVMe fixes via Keith, removal of a dead
function, and a fix for the bio op for read truncates (Ming)"
* tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block:
nvmet: fix per feat data len for get_feature
nvme: Translate more status codes to blk_status_t
fs: move guard_bio_eod() after bio_set_op_attrs
block: remove unused mp_bvec_last_segment
* sm_ftl: Fix NULL pointer warning.
Raw NAND:
* Cadence: fix compile testing.
* STM32: Avoid locking.
Onenand:
* Fix several sparse/build warnings.
SPI-NOR:
* Add a flag to fix interaction with Micron parts.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl4YipIACgkQJWrqGEe9
VoTr/Af9GDYEaD5ZnYeOwTSs43Cd62K7wzPar9tE20xu5VVmPXmyIgSmxyoPXpjh
O89xxahrG4sD0vokSWstjgZVTzBEu2DHkeOsjD6j7buXlv5LN8o4dAqw7k6+Hle5
T5qHZogcO2HK+4OijIP6xJ6hQMGz4YxZvhw34zEqdPYivxTK8X3EDEuQDns9bMUr
nPOjCYhOoR//iIRUA+l78VEnA2unnGGhaQhBxGm43xwqYLrOMsmz859pjbt1DGob
B3w2MlJ33ADBhA3/7PswAb8Otz6yPT8eq/8a8Pl+t9SZIwgZGBnjv/kzkBaZQ0r7
UCe2aVD97l5OkIBoIfPA+thbavrHwQ==
=TapA
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD:
- sm_ftl: Fix NULL pointer warning.
Raw NAND:
- Cadence: fix compile testing.
- STM32: Avoid locking.
Onenand:
- Fix several sparse/build warnings.
SPI-NOR:
- Add a flag to fix interaction with Micron parts"
* tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: Fix the writing of the Status Register on micron flashes
mtd: sm_ftl: fix NULL pointer warning
mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy
mtd: onenand: samsung: Fix iomem access with regular memcpy
mtd: onenand: omap2: Fix errors in style
mtd: cadence: Fix cast to pointer from integer of different size warning
mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus
The Tegra DRM driver heavily relies on the implementations for runtime
suspend/resume to be called at specific times. Unfortunately, there are
some cases where that doesn't work. One example is if the user disables
runtime PM for a given subdevice. Another example is that the PM core
acquires a reference to runtime PM during system sleep, effectively
preventing devices from going into low power modes. This is intentional
to avoid nasty race conditions, but it also causes system sleep to not
function properly on all Tegra systems.
Fix this by not implementing runtime PM at all. Instead, a minimal,
reference-counted suspend/resume infrastructure is added to the host1x
bus. This has the benefit that it can be used regardless of the system
power state (or any transitions we might be in), or whether or not the
user allows runtime PM.
Atomic modesetting guarantees that these functions will end up being
called at the right point in time, so the pitfalls for the more generic
runtime PM do not apply here.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename the host1x clients' parent to "host" because that more closely
describes what it is. The parent can be confused with the parent device
in terms of the device hierarchy. Subsequent patches will add a new
member that refers to the parent in that hierarchy.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull input fixes from Dmitry Torokhov:
"Just a few small fixups here"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: imx_sc_key - only take the valid data from SCU firmware as key state
Input: add safety guards to input_set_keycode()
Input: input_event - fix struct padding on sparc64
Input: uinput - always report EPOLLOUT
[why]
We need to minimally initialize the remote aux channel, e.g. the
crc work struct of remote aux to dump the sink's DPRX CRCs in MST
setup.
[how]
Add helper that only initializes the crc work struct of the remote
aux, hooke crc work queue to 'drm_dp_aux_crc_work'. Then call this
helper in DP MST port initialization.
This, plus David Francis' patch [1], fix the issue of MST remote
aux DPCD CRCs read.
[1] https://patchwork.kernel.org/patch/11217941/
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.
[how]
Adding helper to trigger modesets on MST DSC connectors
by setting mode_changed flag on CRTCs in the same topology
as affected connector
v2: use drm_dp_mst_dsc_aux_for_port function to verify
if the port is DSC capable
v3: - added _must_check attribute
- removed topology manager check
- fix typos and indentations
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check after
drm_dp_mst_atomic_check_topology_state to fully verify that
the proposed topology is supported.
v2: Fixing some typos and indenting
v3: Return correct error enums if no bw space available
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.
Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI slots is expected to be done
in encoder's atomic_check.
v2: squash separate functions into one and call it per
port
v3: Fix comment typos
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For DSC case we cannot use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore the driver has to calculate its own divider based
on the link rate and lane count its handling, as it is hw specific.
[how]
Pass pbn_div as an argument, which is used if its more than
zero, otherwise default topology manager's pbn_div will be used.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs. Add a new quirk to detect this case.
v2: Fix error when checking return of drm_dp_read_desc
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual DPCD
is a DP feature new in DP v1.4, which exposes certain DPCD
registers on virtual ports.
v2: Remember to unlock mutex on all paths
v3: Refactor to match coding style and increase brevity
v4: - Check DSC capable MST sink connected directly to the device.
- Check branch's port_parent to be set
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.
The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)
That value is needed for FEC and DSC support
Store it on drm_dp_mst_port
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
