Commit graph

335,802 commits

Author SHA1 Message Date
Tony Lindgren
84eca270d7 Merge branch 'for_3.7/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into devel-dt 2012-09-10 10:18:05 -07:00
Johannes Berg
83f84d7bd4 iwlwifi: load firmware in chunks
Instead of allocating one big chunk of DMA-coherent
memory for the firmware and keeping it around, only
vmalloc() the firmware and copy it into a single
page of DMA-coherent memory for the upload.

The advantage is that we don't need DMA memory for
the firmware image that is stored while the driver
is operating, we only need it while uploading.

This will make it easier for the driver to work if
the system has fragmented memory.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10 19:14:30 +02:00
Linus Torvalds
6562271ae4 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull i2c subsystem fixes from Jean Delvare.

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-core: Fix for lockdep validator
  i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y
  i2c-i801: Add Device IDs for Intel Lynx Point-LP PCH
2012-09-11 01:13:59 +08:00
Emmanuel Grumbach
7439046d97 iwlwifi: don't access the HW when it is not available
When we kill the radio with the RF kill button we could access
the HW after having stopped the APM which would result in the
warning below.

The flow goes like this:
* RF kill
	iwlwifi notifies the stack which stops the driver
	fw sends CARD_STATE_NOTIFICATION
* iwl_trans_pcie_stop_device stops the APM
* the tasklet runs and calls to iwl_rx_handle
* iwl_rx_handle calls iwl_rx_queue_restock
* iwl_rx_queue_restock tries to access the HW...

[255908.543823] ------------[ cut here ]------------
[255908.543843] WARNING: at drivers/net/wireless/iwlwifi/iwl-io.c:150 iwl_grab_nic_access+0x79/0xb0 [iwlwifi]()
[255908.543849] Hardware name: Latitude E6410
[255908.543852] Timeout waiting for hardware access (CSR_GP_CNTRL 0x000003d8)
[255908.543856] Modules linked in: iwlmvm iwlwifi mac80211 [...]
[255908.543935] Pid: 0, comm: swapper Tainted: G        W   3.1.0 #1
[255908.543939] Call Trace:
[255908.543950]  [<c1046e42>] warn_slowpath_common+0x72/0xa0
[255908.543980]  [<c1046f13>] warn_slowpath_fmt+0x33/0x40
[255908.543992]  [<fa4bb3b9>] iwl_grab_nic_access+0x79/0xb0 [iwlwifi]
[255908.544004]  [<fa4bb9eb>] iwl_write_direct32+0x2b/0xa0 [iwlwifi]
[255908.544018]  [<fa4c0ff9>] iwl_rx_queue_update_write_ptr+0x89/0x1d0 [iwlwifi]
[255908.544054]  [<fa4c1250>] iwlagn_rx_queue_restock+0x110/0x140 [iwlwifi]
[255908.544067]  [<fa4c234d>] iwl_irq_tasklet+0x82d/0xf40 [iwlwifi]
[255908.544096]  [<c104e11e>] tasklet_action+0xbe/0x100
[255908.544102]  [<c104d91e>] __do_softirq+0xae/0x1f0
[255908.544227] ---[ end trace d150f49345d85009 ]---

Prevent this.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10 19:13:20 +02:00
Emmanuel Grumbach
358a46d47e iwlwifi: some clean up in transport layer
Remove outdated iwlagn prefix to a few functions and fix comments
that were not accurate.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10 19:13:05 +02:00
Johannes Berg
2d1c0044dd iwlwifi: fix indentation in iwl_load_given_ucode
There's a block of code that's indented too
far, move it out to where it should be.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10 19:12:52 +02:00
David Spinadel
ee7d737c45 iwlwifi: stop interrupts before stopping device
If an RX interrupt is signalled after or during apm_stop
we may try to access the peripherals which are already
down. Prevent this by disabling interrupts first.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10 19:11:53 +02:00
David Spinadel
8b61fa242c iwlwifi: don't reset interupts after disabling
iwl_disable_interupts() already resets the register, no
need to do it again.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10 19:09:59 +02:00
Lai Jiangshan
ee378aa49b workqueue: fix possible idle worker depletion across CPU hotplug
To simplify both normal and CPU hotplug paths, worker management is
prevented while CPU hoplug is in progress.  This is achieved by CPU
hotplug holding the same exclusion mechanism used by workers to ensure
there's only one manager per pool.

If someone else seems to be performing the manager role, workers
proceed to execute work items.  CPU hotplug using the same mechanism
can lead to idle worker depletion because all workers could proceed to
execute work items while CPU hotplug is in progress and CPU hotplug
itself wouldn't actually perform the worker management duty - it
doesn't guarantee that there's an idle worker left when it releases
management.

This idle worker depletion, under extreme circumstances, can break
forward-progress guarantee and thus lead to deadlock.

This patch fixes the bug by using separate mechanisms for manager
exclusion among workers and hotplug exclusion.  For manager exclusion,
POOL_MANAGING_WORKERS which was restored by the previous patch is
used.  pool->manager_mutex is now only used for exclusion between the
elected manager and CPU hotplug.  The elected manager won't proceed
without holding pool->manager_mutex.

This ensures that the worker which won the manager position can't skip
managing while CPU hotplug is in progress.  It will block on
manager_mutex and perform management after CPU hotplug is complete.

Note that hotplug may happen while waiting for manager_mutex.  A
manager isn't either on idle or busy list and thus the hoplug code
can't unbind/rebind it.  Make the manager handle its own un/rebinding.

tj: Updated comment and description.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-09-10 10:05:54 -07:00
Linus Torvalds
5d67f2e864 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "Just noticed I hadn't send these out, nothing majorly urgent, I know
  AMD guys have some regression fixes coming soon.

  This contains:
   2 nouveau fixes so it loads on the retina MBP systems properly,
   2 vmwgfx fixes to load the driver earlier, and allow distros config it
   1 error->debug fix in ast
  and Keith was playing with 32-on-64 and decided we may as well stick
  the compat ioctl in all the drivers.  It fixes udl for him."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at boot
  drm/vmwgfx: allow a kconfig option to choose if fbcon is enabled
  drm: use drm_compat_ioctl for 32-bit apps
  drm/ast: drop debug level on error printk
  drm/nv50-/gpio: initialise to vbios defaults during init
  drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
2012-09-11 01:05:19 +08:00
Lai Jiangshan
552a37e936 workqueue: restore POOL_MANAGING_WORKERS
This patch restores POOL_MANAGING_WORKERS which was replaced by
pool->manager_mutex by 6037315269 "workqueue: use mutex for global_cwq
manager exclusion".

There's a subtle idle worker depletion bug across CPU hotplug events
and we need to distinguish an actual manager and CPU hotplug
preventing management.  POOL_MANAGING_WORKERS will be used for the
former and manager_mutex the later.

This patch just lays POOL_MANAGING_WORKERS on top of the existing
manager_mutex and doesn't introduce any synchronization changes.  The
next patch will update it.

Note that this patch fixes a non-critical anomaly where
too_many_workers() may return %true spuriously while CPU hotplug is in
progress.  While the issue could schedule idle timer spuriously, it
didn't trigger any actual misbehavior.

tj: Rewrote patch description.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-09-10 10:04:54 -07:00
Sebastian Andrzej Siewior
5c4d46eb89 usb: gadget serial: don't shift bcd version left by 16
Fengguang Wu reported:
|drivers/usb/gadget/serial.c:89:22: sparse: cast truncates bits from
|constant value (24000000 becomes 0)

I obviously let the version number shift away. Since the version is a
16bit number it can be applied as it.

Cc: fengguang.wu@intel.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 20:04:20 +03:00
Mike Thompson
363366cf61 usb: otg: mxs-phy: Fix mx23 operation
Currently mx23 fails to enumerate a USB device:

[ 1.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1.520000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1.740000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1.960000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2.180000] hub 1-0:1.0: unable to enumerate USB device on port 1

Use a kernel workqueue to asynchronously delay the setting of
ENHOSTDISCONDETECT bit until after higher level hub connect/reset processing
is complete.  Prematurely setting the bit prevents the connection
processing from completing and not setting it prevents disconnect from being
detected. No delay is needed for clearing of ENHOSTDISCONDETECT.

Successfully tested on mx23-olinuxino (micro, mini and maxi variants) and mx28evk.

Cc: stable@vger.kernel.org # v3.6
Signed-off-by: Mike Thompson <mpthompson@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:46:38 +03:00
Felix Fietkau
1bad538243 mac80211: validate skb->dev in the tx status path
skb->dev might contain a stale reference to a device that was already
deleted, and using it unchecked can lead to invalid pointer accesses.
Since this is only used for nl80211 tx, iterate over active interfaces
to find a match for skb->dev, and discard the tx status if the device
is gone.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10 18:44:58 +02:00
Felipe Balbi
51e1e7bcef usb: dwc3: add basic PHY support
this will let us control PHYs on platforms which
need them.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:43 +03:00
Felipe Balbi
d720f057fd usb: dwc3: exynos: add nop transceiver support
We will be adding support for transceivers on
dwc3 driver but not all boards have controllable
transceivers.

For those which don't provide controllable transceivers
we will register nop transceivers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:42 +03:00
Felipe Balbi
a418cc4ea5 usb: dwc3: omap: add nop transceiver support
We will be adding support for transceivers on
dwc3 driver but not all boards have controllable
transceivers.

For those which don't provide controllable transceivers
we will register nop transceivers.

Note that once OMAP's transceiver drivers reach mainline,
this glue layer will change accordingly.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:42 +03:00
Felipe Balbi
e3ec3eb794 usb: dwc3: pci: add nop transceiver support
We will be adding support for transceivers on
dwc3 driver but not all boards have controllable
transceivers.

For those which don't provide controllable transceivers
we will register nop transceivers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:41 +03:00
Wei Yongjun
58add6ca84 usb: otg: move the dereference below the NULL test
The dereference should be moved below the NULL test.

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:26:14 +03:00
Wei Yongjun
b232a70a17 watchdog: move the dereference below the NULL test
The dereference should be moved below the NULL test.

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-09-10 17:33:17 +02:00
Sebastian Andrzej Siewior
9830317a3f usb: gadget: add module.h to u_ether.c
Spotted by Fengguang Wu:
|In file included from drivers/usb/gadget/ether.c:110:0:
|drivers/usb/gadget/u_ether.c:87:21: error: expected ')' before 'uint'
|drivers/usb/gadget/u_ether.c:88:25: error: expected ')' before string constant

This is because u_ether.c relied on having module.h included somewhere.
This isn't the case since composite.c is no longer included.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 18:31:40 +03:00
Toshi Kani
308b135e4f hpwdt: Fix kdump issue in hpwdt
kdump can be interrupted by watchdog timer when the timer is left
activated on the crash kernel. Changed the hpwdt driver to disable
watchdog timer at boot-time. This assures that watchdog timer is
disabled until /dev/watchdog is opened, and prevents watchdog timer
to be left running on the crash kernel.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Lisa Mitchell <lisa.mitchell@hp.com>
Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>
2012-09-10 17:28:08 +02:00
Philip, Avinash
daa5629b21 pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM
EHRPWM hardware supports polarity configuration of PWM output. However
configuration of polarity done in hardware only in .enable() to ensure
PWM output present only after enabling PWM. This commit adds support for
polarity configuration for EHRPWM.
When being here, remove configuring of polarity during .config() and do
it explicitly from .set_polarity().

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10 17:05:53 +02:00
Philip, Avinash
454870a44b pwm: pwm-tiecap: Add support for configuring polarity of PWM
ECAP APWM hardware supports polarity configuration of PWM output.
This commit adds support for polarity configuration of ECAP APWM.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10 17:05:52 +02:00
Alexandre Courbot
6354316dbe pwm: add devm_pwm_get() and devm_pwm_put()
Add resource managed variants of pwm_get() and pwm_put() for
convenience. Code is largely inspired by the equivalent devm functions
of the regulator framework.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10 17:05:45 +02:00
Philip, Avinash
0aa0869c3c pwm: Add support for configuring the PWM polarity
Some hardware supports inverting the polarity of the PWM signal. This
commit adds support to the PWM framework to allow users of the PWM API
to configure the polarity. Note that in order to reduce complexity,
changing the polarity of a PWM signal is only allowed while the PWM is
disabled.

A practical example where this can prove useful is to simulate inversion
of the duty cycle. While inversion of polarity and duty cycle are not
exactly the same, the differences for most use-cases are negligible.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10 17:05:44 +02:00
Philip, Avinash
01b2d4536f pwm: pwm-tiehrpwm: Fix conflicting channel period setting
EHRPWM hardware supports 2 independent PWM channels. However the device
uses only one register to handle period setting for both channels. So
both channels should be configured for same period (in nsec).

Fix the same by returning error for conflicting period values.

However, allow
1. Configuration of period settings if not conflicting with other
channels
2. Re-configuring of period settings if no other channels being
configured

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10 17:04:38 +02:00
Philip, Avinash
c06fad9d28 pwm: pwm-tiecap: Disable APWM mode after configure
APWM mode is enabled while configuring PWM device. This was done to
handle shadow & immediate mode update of period and compare registers.
However, leaving it enabled after configuring will cause APWM output on
PWM pin even before enabling PWM device.
Fix the same by disabling APWM mode after configuring if PWM device is
not running.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10 17:03:13 +02:00
J. Bruce Fields
eccf50c129 nfsd: remove unused listener-removal interfaces
You can use nfsd/portlist to give nfsd additional sockets to listen on.
In theory you can also remove listening sockets this way.  But nobody's
ever done that as far as I can tell.

Also this was partially broken in 2.6.25, by
a217813f90 "knfsd: Support adding
transports by writing portlist file".

(Note that we decide whether to take the "delfd" case by checking for a
digit--but what's actually expected in that case is something made by
svc_one_sock_name(), which won't begin with a digit.)

So, let's just rip out this stuff.

Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-09-10 10:55:19 -04:00
J. Bruce Fields
cf9182e90b nfsd4: fix nfs4 stateid leak
Processes that open and close multiple files may end up setting this
oo_last_closed_stid without freeing what was previously pointed to.
This can result in a major leak, visible for example by watching the
nfsd4_stateids line of /proc/slabinfo.

Reported-by: Cyril B. <cbay@excellency.fr>
Tested-by: Cyril B. <cbay@excellency.fr>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-09-10 10:55:14 -04:00
Anton Nurkin
4b83a7a753 [media] cx23885: fix pointer to structure for CAM
Fixes problem with CAM, when  after re-iinitialization
CAM used old pointer to structure.

Signed-off-by: Anton Nurkin <ptqa@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-10 11:53:50 -03:00
Sasha Levin
2b75bc9121 dlm: check the maximum size of a request from user
device_write only checks whether the request size is big enough, but it doesn't
check if the size is too big.

At that point, it also tries to allocate as much memory as the user has requested
even if it's too much. This can lead to OOM killer kicking in, or memory corruption
if (count + 1) overflows.

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2012-09-10 09:50:27 -05:00
Antti Palosaari
0a23dc24cd [media] rtl2832: remove dummy callback implementations
Let the dvb-frontend return -ENOTTY for those unimplemented IOCTLs.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-10 11:31:59 -03:00
Antti Palosaari
3a35c00b04 [media] DocBook: update ioctl error codes
ENOTTY is now returned for unimplemented ioctl by dvb-frontend.
Old EOPNOTSUPP & ENOSYS could be still returned by some drivers
as well as other "non standard" error codes.

EAGAIN is returned in case of device is in state where it cannot
perform requested operation. This is for example sleep and statistics
are queried. Quick check for few demodulator drivers reveals there is
a lot of different error codes used in such case currently, few to
mention still: EOPNOTSUPP, ENOSYS, EAGAIN ... Lets try harmonize.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-10 11:28:50 -03:00
Thomas Petazzoni
f3d8752497 arm: mm: fix DMA pool affiliation check
The __free_from_pool() function was changed in
e9da6e9905. Unfortunately, the test that
checks whether the provided (start,size) is within the DMA pool has
been improperly modified. It used to be:

  if (start < coherent_head.vm_start || end > coherent_head.vm_end)

Where coherent_head.vm_end was non-inclusive (i.e, it did not include
the first byte after the pool). The test has been changed to:

  if (start < pool->vaddr || start > pool->vaddr + pool->size)

So now pool->vaddr + pool->size is inclusive (i.e, it includes the
first byte after the pool), so the test should be >= instead of >.

This bug causes the following message when freeing the *first* DMA
coherent buffer that has been allocated, because its virtual address
is exactly equal to pool->vaddr + pool->size :

WARNING: at /home/thomas/projets/linux-2.6/arch/arm/mm/dma-mapping.c:463 __free_from_pool+0xa4/0xc0()
freeing wrong coherent size from pool

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Maen Suleiman <maen@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Shadi Ammouri <shadi@marvell.com>
Cc: Eran Ben-Avi <benavi@marvell.com>
Cc: Yehuda Yitschak <yehuday@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
[m.szyprowski: rebased onto v3.6-rc5 and resolved conflict]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-09-10 16:15:48 +02:00
Antti Palosaari
177ffe506c [media] dvb_frontend: return -ENOTTY for unimplement IOCTL
Earlier it was returning -EOPNOTSUPP.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-10 11:14:35 -03:00
Antti Palosaari
36bdbc3fff [media] dvb_frontend: use Kernel dev_* logging
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-10 11:13:23 -03:00
Takashi Iwai
498dab3aa7 ALSA: hda - Allow 3/5/7 channel map for HDMI/DP
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-10 16:08:40 +02:00
Florian Vaussard
a135f2f82c ARM: dts: omap3-overo: Add support for the blue LED
Support the blue LED connected to the LEDB pin of the TWL4030
on the Gumstix Overo.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-10 15:44:45 +02:00
Sebastian Andrzej Siewior
ed9cbda63d usb: gadget: remove usb_gadget_controller_number()
The bcdDevice field is defined as
|Device release number in binary-coded decimal
in the USB 2.0 specification. We use this field to distinguish the UDCs
from each other. In theory this could be used on the host side to apply
certain quirks if the "special" UDC in combination with this gadget is
used. This hasn't been done as far as I am aware. In practice it would
be better to fix the UDC driver before shipping since a later release
might not need this quirk anymore.

There are some driver in tree (on the host side) which use the bcdDevice
field to figure out special workarounds for a given firmware revision.
This seems to make sense. Therefore this patch converts all gadgets
(except a few) to use the kernel version instead a random 2 or 3 plus
the UDC number. The few that don't report kernel's version are:
- webcam
  This one reports always a version 0x10 so allow it to do so in future.
- nokia
  This one reports always 0x211. The comment says that this gadget works
  only if the UDC supports altsettings so I added a check for this.
- serial
  This one reports 0x2400 + UDC number. Since the gadget version is 2.4
  this could make sense. Therefore bcdDevice is 0x2400 here.

I also remove various gadget_is_<name> macros which are unused. The
remaining few macros should be moved to feature / bug bitfield.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:43:24 +03:00
Fabio Porcedda
9c6d196d5a usb: gadget: at91_udc: fix dt support
Don't fail the initialization check for the platform_data
if there is avaiable an associated device tree node.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:20:26 +03:00
Wei Yongjun
162ca3ca61 usb: gadget: at91_udc: move the dereference below the NULL test
The dereference should be moved below the NULL test.

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:19:47 +03:00
Sebastian Andrzej Siewior
d80c304bca usb: gadget: libcomposite: move MODULE_VERSION to composite.c
MODULE_VERSION and AUTHOR looks better in composite.c than in
usbstrings.c so I move it there.
I put David Brownell as the module Author as I belive he wrote most of
it.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:13:03 +03:00
Sebastian Andrzej Siewior
721e2e9194 usb: gadget: libcomposite: move composite.c into libcomposite
This moves composite.c into libcomposite and updates all gadgets.
Finally!

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:13:03 +03:00
Sebastian Andrzej Siewior
cc2683c318 usb: gadget: Provide a default implementation of default manufacturer string
Some gadgets provide custom entry here. Some may override it with an
etntry that is also created by composite if there was no value sumbitted
at all.
This patch removes all "custom manufacturer" strings which are the same
as these which are created by composite. Then it moves the creation of
the default manufacturer string to usb_composite_overwrite_options() in
case no command line argument has been used and the entry is still an
empty string.
By doing this we get rid of the global variable "composite_manufacturer"
in composite.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:13:02 +03:00
Sebastian Andrzej Siewior
d33f74fce3 usb: gadget: remove string override from struct usb_composite_driver
The struct usb_composite_driver members iProduct, iSerial and
iManufacturer can be entered directly via the string array. There is no
need for them to appear here.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:13:02 +03:00
Sebastian Andrzej Siewior
2d35ee47aa usb: gadget: push iProduct into gadgets
This patch pushes the iProduct module argument from composite
into each gadget.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:13:01 +03:00
Sebastian Andrzej Siewior
03de9bf69c usb: gadget: push iManufacturer into gadgets
This patch pushes the iManufacturer module argument from composite into
each gadget. Once the user uses the module paramter, the string is
overwritten with the final value.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:13:01 +03:00
Sebastian Andrzej Siewior
1cf0d26408 usb: gadget: push iSerialNumber into gadgets
This patch pushes the iSerialNumber module argument from composite into
each gadget. Once the user uses the module paramter, the string is
overwritten with the final value.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:13:00 +03:00
Sebastian Andrzej Siewior
276e2e4f1f usb: gadget: make sure each gadget is using same index for Product, Serial,…
The index in usb_string array is defined by the gadget. The gadget can
choose which index entry it assigns for the serial number and which the
product name. The gadget has just to ensure that the descriptor contains
the proper string id which is assigned by composite.
If the composite layer knows the index of the "default" information
which will be overwritten by module parameters, it can be used later to
overwrite it.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 16:13:00 +03:00