commit 0c33aa1804 upstream.
Neoverse-V3AE is also affected by erratum #3312417, as described in its
Software Developer Errata Notice (SDEN) document:
Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417
https://developer.arm.com/documentation/SDEN-2615521/9-0/
Enable the workaround for Neoverse-V3AE, and document this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[ Ryan: Trivial backport ]
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0b4b77eff5 ]
This sysctl is not per interface; it's global per netns.
Fixes: 292ecd9f5a ("doc: move seg6_flowlabel to seg6-sysctl.rst")
Reported-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278033a225 ]
When CONFIG_TMPFS is enabled, the initial root filesystem is a tmpfs.
By default, a tmpfs mount is limited to using 50% of the available RAM
for its content. This can be problematic in memory-constrained
environments, particularly during a kdump capture.
In a kdump scenario, the capture kernel boots with a limited amount of
memory specified by the 'crashkernel' parameter. If the initramfs is
large, it may fail to unpack into the tmpfs rootfs due to insufficient
space. This is because to get X MB of usable space in tmpfs, 2*X MB of
memory must be available for the mount. This leads to an OOM failure
during the early boot process, preventing a successful crash dump.
This patch introduces a new kernel command-line parameter,
initramfs_options, which allows passing specific mount options directly
to the rootfs when it is first mounted. This gives users control over
the rootfs behavior.
For example, a user can now specify initramfs_options=size=75% to allow
the tmpfs to use up to 75% of the available memory. This can
significantly reduce the memory pressure for kdump.
Consider a practical example:
To unpack a 48MB initramfs, the tmpfs needs 48MB of usable space. With
the default 50% limit, this requires a memory pool of 96MB to be
available for the tmpfs mount. The total memory requirement is therefore
approximately: 16MB (vmlinuz) + 48MB (loaded initramfs) + 48MB (unpacked
kernel) + 96MB (for tmpfs) + 12MB (runtime overhead) ≈ 220MB.
By using initramfs_options=size=75%, the memory pool required for the
48MB tmpfs is reduced to 48MB / 0.75 = 64MB. This reduces the total
memory requirement by 32MB (96MB - 64MB), allowing the kdump to succeed
with a smaller crashkernel size, such as 192MB.
An alternative approach of reusing the existing rootflags parameter was
considered. However, a new, dedicated initramfs_options parameter was
chosen to avoid altering the current behavior of rootflags (which
applies to the final root filesystem) and to prevent any potential
regressions.
Also add documentation for the new kernel parameter "initramfs_options"
This approach is inspired by prior discussions and patches on the topic.
Ref: https://www.lightofdawn.org/blog/?viewDetailed=00128
Ref: https://landley.net/notes-2015.html#01-01-2015
Ref: https://lkml.org/lkml/2021/6/29/783
Ref: https://www.kernel.org/doc/html/latest/filesystems/ramfs-rootfs-initramfs.html#what-is-rootfs
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Link: https://lore.kernel.org/20250815121459.3391223-1-lichliu@redhat.com
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2985c96485 ]
Besides some legacy code, vmwgfx is the only user of DRM's hash-
table implementation. Copy the code into the driver, so that the
core code can be retired.
No functional changes. However, the real solution for vmwgfx is to
use Linux' generic hash-table functions.
v2:
* add TODO item for updating vmwgfx (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211129094841.22499-3-tzimmermann@suse.de
Stable-dep-of: dfe1323ab3 ("drm/vmwgfx: Fix Use-after-free in validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c716e87ea ]
Section heading for sched_waking histogram is shown as normal paragraph
instead due to codeblock marker for the following diagram being in the
same line as the section underline. Separate them.
Fixes: daceabf1b4 ("tracing/doc: Fix ascii-art in histogram-design.rst")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250916054202.582074-5-bagasdotme@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee047e1d85 upstream.
Lists should have fixed constraints, because binding must be specific in
respect to hardware, thus add missing constraints to number of clocks.
Cc: stable <stable@kernel.org>
Fixes: 88a499cd70 ("dt-bindings: Add support for the Broadcom UART driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250812121630.67072-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9969779d08 upstream.
VMSCAPE is a vulnerability that may allow a guest to influence the branch
prediction in host userspace, particularly affecting hypervisors like QEMU.
Add the documentation.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Amit Shah <amit.shah@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed59dfd950 ]
The memory barrier dma_mb() is introduced by commit a76a37777f
("iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer"),
which is used to ensure that prior (both reads and writes) accesses
to memory by a CPU are ordered w.r.t. a subsequent MMIO write.
Reviewed-by: Arnd Bergmann <arnd@arndb.de> # for asm-generic
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20220523113126.171714-2-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: aa6956150f ("wifi: ath11k: fix dest ring-buffer corruption when ring is full")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f5ce071462 ]
When add_addr_timeout was set to 0, this caused the ADD_ADDR to be
retransmitted immediately, which looks like a buggy behaviour. Instead,
interpret 0 as "no retransmissions needed".
The documentation is updated to explicitly state that setting the timeout
to 0 disables retransmission.
Fixes: 93f323b9cc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-5-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ pm.c => pm_netlink.c , drop mptcp_pm_alloc_anno_list hunk ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e65cb01134 upstream.
The _CRS resources in many cases want to have ResourceSource field
to be a type of ACPI String. This means that to compile properly
we need to enclosure the name path into double quotes. This will
in practice defer the interpretation to a run-time stage, However,
this may be interpreted differently on different OSes and ACPI
interpreter implementations. In particular ACPICA might not correctly
recognize the leading '^' (caret) character and will not resolve
the relative name path properly. On top of that, this piece may be
used in SSDTs which are loaded after the DSDT and on itself may also
not resolve relative name paths outside of their own scopes.
With this all said, fix documentation to use fully-qualified name
paths always to avoid any misinterpretations, which is proven to
work.
Fixes: 8eb5c87a92 ("i2c: add ACPI support for I2C mux ports")
Reported-by: Yevhen Kondrashyn <e.kondrashyn@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250710170225.961303-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 81b6ecca2f ]
We should use "{usr,grp,prj}jquota=" to disable journaled quota,
rather than using off{usr,grp,prj}jquota.
Fixes: 4b2414d04e ("f2fs: support journalled quota")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d8010d4ba4 upstream.
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f9af88a3d3 upstream.
It will be used by other x86 mitigations.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 021f243627 ]
Change "resourse" into "resource" in the name of a sysfs attribute.
Fixes: d829fc8a10 ("scsi: ufs: sysfs: unit descriptor")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0981213407 upstream.
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 877ace9eab ]
In our environment, it was found that the mitigation BHB has a great
impact on the benchmark performance. For example, in the lmbench test,
the "process fork && exit" test performance drops by 20%.
So it is necessary to have the ability to turn off the mitigation
individually through cmdline, thus avoiding having to compile the
kernel by adjusting the config.
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1661514050-22263-1-git-send-email-liusong@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4fc2d289b3 which is
commit 98fdaeb296 upstream.
commit 7adb96687c ("x86/bugs: Make spectre user default depend on
MITIGATION_SPECTRE_V2") depends on commit 72c70f480a ("x86/bugs: Add
a separate config for Spectre V2"), which introduced
MITIGATION_SPECTRE_V2.
commit 72c70f480a ("x86/bugs: Add a separate config for Spectre V2")
never landed in stable tree, thus, stable tree doesn't have
MITIGATION_SPECTRE_V2, that said, commit 7adb96687c ("x86/bugs: Make
spectre user default depend on MITIGATION_SPECTRE_V2") has no value if
the dependecy was not applied.
Revert commit 7adb96687c ("x86/bugs: Make spectre user default
depend on MITIGATION_SPECTRE_V2") in stable kernel which landed in in
5.4.294, 5.10.238, 5.15.185, 6.1.141 and 6.6.93 stable versions.
Cc: David.Kaplan@amd.com
Cc: peterz@infradead.org
Cc: pawan.kumar.gupta@linux.intel.com
Cc: mingo@kernel.org
Cc: brad.spengler@opensrcsec.com
Cc: stable@vger.kernel.org # 6.6 6.1 5.15 5.10 5.4
Reported-by: Brad Spengler <brad.spengler@opensrcsec.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 98fdaeb296 ]
Change the default value of spectre v2 in user mode to respect the
CONFIG_MITIGATION_SPECTRE_V2 config option.
Currently, user mode spectre v2 is set to auto
(SPECTRE_V2_USER_CMD_AUTO) by default, even if
CONFIG_MITIGATION_SPECTRE_V2 is disabled.
Set the spectre_v2 value to auto (SPECTRE_V2_USER_CMD_AUTO) if the
Spectre v2 config (CONFIG_MITIGATION_SPECTRE_V2) is enabled, otherwise
set the value to none (SPECTRE_V2_USER_CMD_NONE).
Important to say the command line argument "spectre_v2_user" overwrites
the default value in both cases.
When CONFIG_MITIGATION_SPECTRE_V2 is not set, users have the flexibility
to opt-in for specific mitigations independently. In this scenario,
setting spectre_v2= will not enable spectre_v2_user=, and command line
options spectre_v2_user and spectre_v2 are independent when
CONFIG_MITIGATION_SPECTRE_V2=n.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Kaplan <David.Kaplan@amd.com>
Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-2-b7ff1dab840e@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2665281a07 upstream.
Ice Lake generation CPUs are not affected by guest/host isolation part of
ITS. If a user is only concerned about KVM guests, they can now choose a
new cmdline option "vmexit" that will not deploy the ITS mitigation when
CPU is not affected by guest/host isolation. This saves the performance
overhead of ITS mitigation on Ice Lake gen CPUs.
When "vmexit" option selected, if the CPU is affected by ITS guest/host
isolation, the default ITS mitigation is deployed.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4818881c4 upstream.
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 25882c82f8 ]
This callback is never called, so remove support.
Link: https://lore.kernel.org/r/1645112566-115804-4-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 8aa580cd92 ("scsi: hisi_sas: Enable force phy when SATA disk directly connected")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53 ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
[ Apply only documentation changes as commit which causes boot
crash when boot CPU is nohz_full is not backported to stable
kernels - Krishanth ]
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Signed-off-by: Krishanth Jagaduri <Krishanth.Jagaduri@sony.com>
[ strip out upstream commit and Fixes: so tools don't get confused that
this commit actually does anything real - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 737b6a10ac ]
Allow the use of a deferrable timer, which does not force CPU wake-ups
when the system is idle. A consequence is that the sample interval
becomes very unpredictable, to the point that it is not guaranteed that
the KFENCE KUnit test still passes.
Nevertheless, on power-constrained systems this may be preferable, so
let's give the user the option should they accept the above trade-off.
Link: https://lkml.kernel.org/r/20220308141415.3168078-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: e64f81946a ("kfence: skip __GFP_THISNODE allocations on NUMA systems")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cd343008b ]
Introduce KCONFIG_WARN_UNKNOWN_SYMBOLS environment variable,
which makes Kconfig warn about unknown config symbols.
This is especially useful for continuous kernel uprevs when
some symbols can be either removed or renamed between kernel
releases (which can go unnoticed otherwise).
By default KCONFIG_WARN_UNKNOWN_SYMBOLS generates warnings,
which are non-terminal. There is an additional environment
variable KCONFIG_WERROR that overrides this behaviour and
turns warnings into errors.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: a409fc1463 ("kconfig: fix memory leak in sym_warn_unmet_dep()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6856edf7ea ]
The sense resistor used for measuring currents is typically some tens of
milli Ohms. It has accidentally been documented to be tens of mega Ohms.
Fix the size of this resistor and a few copy-paste errors while at it.
Drop the unsuitable 'rohm,charger-sense-resistor-ohms' property (which
can't represent resistors smaller than one Ohm), and introduce a new
'rohm,charger-sense-resistor-micro-ohms' property with appropriate
minimum, maximum and default values instead.
Fixes: 4238dc1e64 ("dt_bindings: mfd: Add ROHM BD71815 PMIC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0efd8e9de0ae8d62ee4c6b78cc565b04007a245d.1731430700.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08242719a8 ]
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It should not have been used for new
submissions such as the MT6315.
Drop the property from the MT6315 regulator binding and its examples.
Fixes: 977fb5b584 ("regulator: document binding for MT6315 regulator")
Fixes: 6d435a94ba ("regulator: mt6315: Enforce regulator-compatible, not name")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241211052427.4178367-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 609bc99a44 ]
The LED color definitions have always been in
include/dt-bindings/leds/common.h in upstream.
Fixes: 5c7f8ffe74 ("dt: bindings: Add multicolor class dt bindings documention")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a3c7ea92e90b77032f2e480d46418b087709286d.1731588129.git.geert+renesas@glider.be
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de40c8496e ]
The leds/common.yaml is referenced directly in each LED node, which
leads to people doing the same with leds/leds-class-multicolor.yaml.
This is not correct because leds-class-multicolor.yaml defined multi-led
property and its children. Some schemas implemented this incorrect.
Rework this to match same behavior common.yaml, so expect the multi-led
node to reference the leds-class-multicolor.yaml. Fixing allows to add
unevaluatedProperties:false.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Stable-dep-of: 609bc99a44 ("dt-bindings: leds: class-multicolor: Fix path to color definitions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac123741b8 ]
This allows to group multiple PWM-connected monochrome LEDs into
multicolor LEDs, e.g. RGB LEDs.
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Stable-dep-of: 609bc99a44 ("dt-bindings: leds: class-multicolor: Fix path to color definitions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21c0d13e3d ]
The unit address does not make sense in all cases the multi-led node is
used, e.g. for the upcoming PWM multi-color LED driver.
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Stable-dep-of: 609bc99a44 ("dt-bindings: leds: class-multicolor: Fix path to color definitions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8e53db46f ]
This adds the binding document describing the three hardware blocks
related to the Light Pulse Generator found in a wide range of Qualcomm
PMICs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Stable-dep-of: 609bc99a44 ("dt-bindings: leds: class-multicolor: Fix path to color definitions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dca669354e ]
Another pass at removing unnecessary use of 'allOf' with a '$ref'.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Marek Behún <kabel@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228213802.1639658-1-robh@kernel.org
Stable-dep-of: 609bc99a44 ("dt-bindings: leds: class-multicolor: Fix path to color definitions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8762b07c95 ]
Many SPI controllers need to add properties to peripheral devices. This
could be the delay in clock or data lines, etc. These properties are
controller specific but need to be defined in the peripheral node
because they are per-peripheral and there can be multiple peripherals
attached to a controller.
If these properties are not added to the peripheral binding, then the
dtbs check emits a warning. But these properties do not make much sense
in the peripheral binding because they are controller-specific and they
will just pollute every peripheral binding. So this binding is added to
collect all such properties from all such controllers. Peripheral
bindings should simply refer to this binding and they should be rid of
the warnings.
There are some limitations with this approach. Firstly, there is no way
to specify required properties. The schema contains properties for all
controllers and there is no way to know which controller is being used.
Secondly, there is no way to restrict additional properties. Since this
schema will be used with an allOf operator, additionalProperties needs
to be true. In addition, the peripheral schema will have to set
unevaluatedProperties: false.
Despite these limitations, this appears to be the best solution to this
problem that doesn't involve modifying existing tools or schema specs.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211109181911.2251-2-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 609bc99a44 ("dt-bindings: leds: class-multicolor: Fix path to color definitions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2b8e93ec0 ]
The term "slot ID" has nothing to do with the SDIO function number
which is specified in the reg property of the subnodes, rephrase
the description to be more accurate.
Fixes: f9b7989859 ("dt-bindings: mmc: Add YAML schemas for the generic MMC options")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241128-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson-mx-sdio-v4-1-11d9f9200a59@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb84dc8f4 ]
Update the documentation to match the behaviour of the code.
pm_runtime_resume_and_get() always returns 0 on success, even if
__pm_runtime_resume() returns 1.
Fixes: 2c412337cf ("PM: runtime: Add documentation for pm_runtime_resume_and_get()")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Link: https://patch.msgid.link/20241203143729.478-1-paul.barker.ct@bp.renesas.com
[ rjw: Subject and changelog edits, adjusted new comment formatting ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fa046449a ]
The "bus" and "cxl_bus" reset methods reset a device by asserting Secondary
Bus Reset on the bridge leading to the device. These only work if the
device is the only device below the bridge.
Add a sysfs 'reset_subordinate' attribute on bridges that can assert
Secondary Bus Reset regardless of how many devices are below the bridge.
This resets all the devices below a bridge in a single command, including
the locking and config space save/restore that reset methods normally do.
This may be the only way to reset devices that don't support other reset
methods (ACPI, FLR, PM reset, etc).
Link: https://lore.kernel.org/r/20241025222755.3756162-1-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
[bhelgaas: commit log, add capable(CAP_SYS_ADMIN) check]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12b3642b6c ]
Code expects array only with 2 items which should be checked.
But also item checking is not working as it should likely because of
incorrect items description.
Fixes: d50f974c4f ("dt-bindings: serial: Convert rs485 bindings to json-schema")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/820c639b9e22fe037730ed44d1b044cdb6d28b75.1726480384.git.michal.simek@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 885dcb08c9 ]
Currently the documentation claims that a maximum of 1000 msecs is allowed
for RTS delays. However nothing actually checks the values read from device
tree/ACPI and so it is possible to set much higher values.
There is already a maximum of 100 ms enforced for RTS delays that are set
via the UART TIOCSRS485 ioctl. To be consistent with that use the same
limit for DT/ACPI values.
Although this change is visible to userspace the risk of breaking anything
when reducing the max delays from 1000 to 100 ms should be very low, since
100 ms is already a very high maximum for delays that are usually rather in
the usecs range.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20220710164442.2958979-7-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 12b3642b6c ("dt-bindings: serial: rs485: Fix rs485-rts-delay property")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c66f759832 ]
Add the missing 'name' parameter to the mount_api documentation for
fs_validate_description().
Fixes: 96cafb9ccb ("fs_parser: remove fs_parameter_description name field")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241125215021.231758-1-rdunlap@infradead.org
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47f3f5a82a ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one and add clock-names to differentiate between parent clocks and
the bus clock.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-1-bc5e0733ad76@analog.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4649cbd97f ]
Some fix and updates in the following items:
1. examples:
Update generic node name to 'audio-codec' to comply with the
coming change in 'mt6359.dtsi'. This change is necessary to fix the
dtbs_check error:
pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
2. mediatek,dmic-mode:
After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
discovered that the definitions of 'two wires' and 'one wire' are
inverted compared to the DT schema.
For example, the following boards using MT6359 PMIC:
- mt8192-asurada.dtsi
- mt8195-cherry.dtsi
These boards use the same definitions of 'dmic-mode' as other boards
using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
in the device trees.
Upon examining the code in [1] and [2], it was confirmed that the
definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
"MT6358 PMIC". Therefore, the DT Schema should be correct as is.
References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515
Fixes: 539237d1c6 ("dt-bindings: mediatek: mt6359: add codec document")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c1806c41c ]
While fuzzing an arm64 kernel, Alexander Potapenko reported:
| BUG: KCSAN: data-race in ktime_get_mono_fast_ns / timekeeping_update
|
| write to 0xffffffc082e74248 of 56 bytes by interrupt on cpu 0:
| update_fast_timekeeper kernel/time/timekeeping.c:430 [inline]
| timekeeping_update+0x1d8/0x2d8 kernel/time/timekeeping.c:768
| timekeeping_advance+0x9e8/0xb78 kernel/time/timekeeping.c:2344
| update_wall_time+0x18/0x38 kernel/time/timekeeping.c:2360
| [...]
|
| read to 0xffffffc082e74258 of 8 bytes by task 5260 on cpu 1:
| __ktime_get_fast_ns kernel/time/timekeeping.c:372 [inline]
| ktime_get_mono_fast_ns+0x88/0x174 kernel/time/timekeeping.c:489
| init_srcu_struct_fields+0x40c/0x530 kernel/rcu/srcutree.c:263
| init_srcu_struct+0x14/0x20 kernel/rcu/srcutree.c:311
| [...]
|
| value changed: 0x000002f875d33266 -> 0x000002f877416866
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 UID: 0 PID: 5260 Comm: syz.2.7483 Not tainted 6.12.0-rc3-dirty #78
This is a false positive data race between a seqcount latch writer and a reader
accessing stale data. Since its introduction, KCSAN has never understood the
seqcount_latch interface (due to being unannotated).
Unlike the regular seqlock interface, the seqcount_latch interface for latch
writers never has had a well-defined critical section, making it difficult to
teach tooling where the critical section starts and ends.
Introduce an instrumentable (non-raw) seqcount_latch interface, with
which we can clearly denote writer critical sections. This both helps
readability and tooling like KCSAN to understand when the writer is done
updating all latch copies.
Fixes: 88ecd153be ("seqlock, kcsan: Add annotations for KCSAN")
Reported-by: Alexander Potapenko <glider@google.com>
Co-developed-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241104161910.780003-4-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6ec62e01a ]
The description of PDU1 format usage mistakenly referred to PDU2 format.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241023145257.82709-1-alexander.hoelzl@gmx.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 081eb7932c ]
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
* 7187bb7d0b ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
* 75b3c43eab ("arm64: errata: Expand speculative SSBS workaround")
* 145502cac7ea70b5 ("arm64: errata: Expand speculative SSBS workaround (again)")
Since then, a (hopefully final) batch of updates have been published,
with two more affected CPUs. For the affected CPUs the existing
mitigation is sufficient, as described in their respective Software
Developer Errata Notice (SDEN) documents:
* Cortex-A715 (MP148) SDEN v15.0, erratum 3456084https://developer.arm.com/documentation/SDEN-2148827/1500/
* Neoverse-N3 (MP195) SDEN v5.0, erratum 3456111
https://developer.arm.com/documentation/SDEN-3050973/0500/
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list, and update silicon-errata.rst and the
Kconfig text accordingly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240930111705.3352047-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fix conflict in silicon-errata.rst, handle move ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41e8149c88 ]
This adds a Kconfig option and boot param to allow removing
the FOLL_FORCE flag from /proc/pid/mem write calls because
it can be abused.
The traditional forcing behavior is kept as default because
it can break GDB and some other use cases.
Previously we tried a more sophisticated approach allowing
distributions to fine-tune /proc/pid/mem behavior, however
that got NAK-ed by Linus [1], who prefers this simpler
approach with semantics also easier to understand for users.
Link: https://lore.kernel.org/lkml/CAHk-=wiGWLChxYmUA5HrT5aopZrB7_2VTa0NLZcxORgkUe5tEQ@mail.gmail.com/ [1]
Cc: Doug Anderson <dianders@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://lore.kernel.org/r/20240802080225.89408-1-adrian.ratiu@collabora.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1018a5463a ]
Once F2FS_IPU_FORCE policy is enabled in some cases:
a) f2fs forces to use F2FS_IPU_FORCE in a small-sized volume
b) user sets F2FS_IPU_FORCE policy via sysfs
Then we may fail to defragment file due to IPU policy check, it doesn't
make sense, let's introduce a new IPU policy to allow OPU during file
defragmentation.
In small-sized volume, let's enable F2FS_IPU_HONOR_OPU_WRITE policy
by default.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 884ee6dc85 ("f2fs: get rid of online repaire on corrupted directory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
