An infinite loop may occur if we fail to acquire the HW semaphore,
which is needed for resource release.
This will typically happen if the hardware is surprise-removed.
At this stage there is nothing to do, except log an error and quit.
Fixes: c0071c7aa5 ("igc: Add HW initialization code")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix access illegal address problem in following condition:
There are multiple devfreq cooling devices in system, some of them has
EM model but others do not. Energy model ops such as state2power will
append to global devfreq_cooling_ops when the cooling device with
EM model is registered. It makes the cooling device without EM model
also use devfreq_cooling_ops after appending when registered later by
of_devfreq_cooling_register_power() or of_devfreq_cooling_register().
The IPA governor regards the cooling devices without EM model as a power
actor, because they also have energy model ops, and will access illegal
address at dfc->em_pd when execute cdev->ops->get_requested_power,
cdev->ops->state2power or cdev->ops->power2state.
Fixes: 615510fe13 ("thermal: devfreq_cooling: remove old power model and use EM")
Cc: 5.13+ <stable@vger.kernel.org> # 5.13+
Signed-off-by: Kant Fan <kant@allwinnertech.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add parameter description in alloc_rtree_node() kernel-doc
comment and fix several inconsistent function name descriptions.
Remove some warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
kernel/power/snapshot.c:438: warning: Function parameter or member
'gfp_mask' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member
'safe_needed' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member 'ca'
not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member
'list' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:916: warning: expecting prototype for
memory_bm_rtree_next_pfn(). Prototype was for memory_bm_next_pfn()
instead
kernel/power/snapshot.c:1947: warning: expecting prototype for
alloc_highmem_image_pages(). Prototype was for alloc_highmem_pages()
instead
kernel/power/snapshot.c:2230: warning: expecting prototype for load
header(). Prototype was for load_header() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Comment adjustments to avoid line breaks ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleaning up the driver to use pm_sleep_ptr() macro instead of #ifdef
guards is simpler and allows the compiler to remove those functions
if built without CONFIG_PM_SLEEP support.
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently pm_pr_dbg() is used to filter kernel pm debug messages based
on pm_debug_messages_on flag. The problem is if we enable/disable this
flag it will affect all pm_pr_dbg() calls at once, so we can't
individually control them.
This patch changes pm_pr_dbg() implementation as such:
- If pm_debug_messages_on is enabled, print the message.
- If pm_debug_messages_on is disabled and CONFIG_DYNAMIC_DEBUG is
enabled, only print the messages explicitly enabled on
/sys/kernel/debug/dynamic_debug/control.
- If pm_debug_messages_on is disabled and CONFIG_DYNAMIC_DEBUG is
disabled, don't print the message.
Signed-off-by: David Cohen <dacohen@pm.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The macro -DDEBUG is broadly enabled on kernel/power/ directory if
CONFIG_DYNAMIC_DEBUG is enabled. As side effect all debug messages using
pr_debug() and dev_dbg() are enabled by default on dynamic debug.
We're reworking pm_pr_dbg() to support dynamic debug, where pm_pr_dbg()
will print message if either pm_debug_messages_on flag is set or if it's
explicitly enabled on dynamic debug's control. That means if we let
-DDEBUG broadly set, the pm_debug_messages_on flag will be bypassed by
default on pm_pr_dbg() if dynamic debug is also enabled.
The files that directly use pr_debug() and dev_dbg() on kernel/power/ are:
- swap.c
- snapshot.c
- energy_model.c
And those files do not use pm_pr_dbg(). So if we limit -DDEBUG to them,
we keep the same functional behavior while allowing the pm_pr_dbg()
refactor.
Signed-off-by: David Cohen <dacohen@pm.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This driver currently rewrites bus_flags based solely on the value of
DT property 'data-mirror' and ignores bus_flags which might have been
set in DT panel-timing node. Specificaly, the 'de-active' DT property
sets DRM_BUS_FLAG_DE_ bus_flags.
Since of_get_drm_panel_display_mode() conveniently parses the bus_flags
out of DT panel-timing property, just ORR them with bus_flags inferred
from 'data-mirror' DT property and use the result as panel bus_flags.
This fixes handling of panels with 'panel-timing { de-active = <1>; };'.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-2-marex@denx.de
The Energy Model power values might be artificial. In such case
it's safe to bail out during the registration, since the PowerCap
framework supports only micro-Watts.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model can now be artificial, which means the power values
are mathematically generated to leverage EAS while not expected to be on
an uniform scale with other devices providing power information. If this
EM type is in use, the thermal governor IPA should not be allowed to
operate, since the relation between cooling devices is not properly
defined. Thus, it might be possible that big GPU has lower power values
than a Little CPU. To mitigate a misbehaviour of the thermal control
algorithm, simply do not register the cooling device as IPA's power
actor.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add description about new artificial EM registration and use cases.
Update also the documentation with the new .get_cost() callback
description and usage.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mode parsing is currently implemented in three steps:
of_get_display_timing() - DT panel-timing to struct display_timing
videomode_from_timing() - struct display_timing to struct videomode
drm_display_mode_from_videomode() - struct videomode to struct drm_display_mode
Replace all that with simple of_get_drm_panel_display_mode() call,
which already populates struct drm_display_mode and then duplicate
that mode in panel_lvds_get_modes() each time, since the mode does
not change.
Nice bonus is the bus_flags parsed by of_get_drm_panel_display_mode()
out of panel-timing DT node, which is used in subsequent patch to fix
handling of 'de-active' DT property.
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-1-marex@denx.de
The Energy Model gets more bits used in 'flags'. Avoid adding another
debugfs file just to print what is the status of a new flag. Simply
remove old debugfs files and add one generic which prints all flags
as a hex value.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .active_power() callback passes the device pointer when it's called.
Aligned with a convetion present in other subsystems and pass the 'dev'
as a first argument. It looks more cleaner.
Adjust all affected drivers which implement that API callback.
Suggested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model (EM) allows to provide the 'cost' values when the device
driver provides the .get_cost() optional callback. This removes
restriction which is in the EM calculation function of the 'cost'
for each performance state. Now, the driver is in charge of providing
the right values which are then used by Energy Aware Scheduler.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model (EM) can be used on platforms which are missing real
power information. Those platforms would implement .get_cost() which
populates needed values for the Energy Aware Scheduler (EAS). The EAS
doesn't use 'power' fields from EM, but other frameworks might use them.
Thus, to avoid miss-usage of this specific type of EM, introduce a new
flags which can be checked by other frameworks.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model (EM) supports devices which report abstract power scale,
not only real Watts. The primary goal for EM is to enable the Energy Aware
Scheduler (EAS) for a given platform. Some of the platforms might not be
able to deliver proper power values. The only information that they might
have is the relative efficiency between CPU types.
Thus, it makes sense to remove some restrictions in the EM framework and
introduce a mechanism which would support those platforms. What is crucial
for EAS to operate is the 'cost' field in the EM. The 'cost' is calculated
internally in EM framework based on knowledge from 'power' values.
The 'cost' values must be strictly increasing. The existing API with its
'power' value size restrictions cannot guarantee that the 'cost' will meet
this requirement.
Since the platform is missing this detailed information, but has only
efficiency details, introduce a new custom callback in the EM framework.
The new callback would allow to provide the 'cost' values which reflect
efficiency of the CPUs. This would allow to provide EAS information which
has different relation than what would be forced by the EM internal
formulas calculating 'cost' values. Thanks to this new callback it is
possible to create a system view for EAS which has no overlapping
performance states across many Performance Domains.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To make debugging easier, convert driver to regmap. Implement read and write
regmap tables for known registers, keep all known register readable and mark
those which are obviously read-only as not writeable.
Use common I2C regmap for the I2C configuration, implement custom regmap bus
for DSI configuration. The later is mandatory as this chip requires one extra
byte set to read access length between register address and data.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220403171004.368464-1-marex@denx.de
Let's make sure FBC is always disabled when we start to take
over the hardware state.
I suspect this should never really happen, since the only time
when we really should be taking over with the display already
active is when the previous state was progammed by the BIOS,
which likely shouldn't use FBC. This could be driver init,
or S4 resume when the boot kernel doesn't load i915. But I
suppose no harm in keeping this code around for exra safety
since it's quite trivial.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
By the time intel_fbc_global_disable() gets called during driver
teardown we should have already disabled all the crtcs, so
no way FBC should be enabled at this point.
And I have no idea what the other user (i915_restore_display())
is even trying to achieve.
So let's just throw intel_fbc_global_disable() into the bin.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Don't issue a nuke from frontbuffer flush while a flip is pending.
This avoids the DSPADDR/DSPSURF rmw abuse from the pre-snb nuke
from racing with the DSPADDR/DSPSURF write being performed by
the flip/plane update. The flip itself will already cause the nuke
so a double nuke is redundant.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Not sure what the point of this fbc->possible_frontbuffer_bits is.
And especially don't see why it's returning all the bits when
fbc is not even enabled. So let's just get rid of this and only
say we are interested in the plane's frontbuffer bits when fbc
is actually enabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
'ti,n-factor' is read as a 32-bit signed value, so the type and constraints
are wrong. The same property is also defined for ti,tmp464 and is correct.
The constraints should also not be under 'items' as this property is not an
array.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220413134729.3112190-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since the conversion to spi-mem, the driver advertised support for
various operations that cqspi_set_protocol() was never expected to handle
correctly - in particuar all non-DTR operations with command or address
buswidth > 1. For DTR, all operations except for 8-8-8 would fail, as
cqspi_set_protocol() returns -EINVAL.
In non-DTR mode, this resulted in data corruption for SPI-NOR flashes that
support such operations. As a minimal fix that can be backported to stable
kernels, simply disallow the unsupported operations again to avoid this
issue.
Fixes: a314f63677 ("mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220406132832.199777-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This switch is not even supported, but if someone were to actually put
this compatible string "realtek,rtl8366s" in their device tree, they
would be greeted with a kernel panic because the probe function would
dereference NULL. So let's just remove it.
Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel test robot reported a build failure:
or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant'
... with the following build configuration:
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=m
The problem here is that the realtek-smi interface driver gets built-in,
while the rtl8366rb switch subdriver gets built as a module, hence the
symbol rtl8366rb_variant is not reachable when defining the OF device
table in the interface driver.
The Kconfig dependencies don't help in this scenario because they just
say that the subdriver(s) depend on at least one interface driver. In
fact, the subdrivers don't depend on the interface drivers at all, and
can even be built even in their absence. Somewhat strangely, the
interface drivers can also be built in the absence of any subdriver,
BUT, if a subdriver IS enabled, then it must be reachable according to
the linkage of the interface driver: effectively what the IS_REACHABLE()
macro achieves. If it is not reachable, the above kind of linker error
will be observed.
Rather than papering over the above build error by simply using
IS_REACHABLE(), we can do a little better and admit that it is actually
the interface drivers that have a dependency on the subdrivers. So this
patch does exactly that. Specifically, we ensure that:
1. The interface drivers' Kconfig symbols must have a value no greater
than the value of any subdriver Kconfig symbols.
2. The subdrivers should by default enable both interface drivers, since
most users probably want at least one of them; those interface
drivers can be explicitly disabled however.
What this doesn't do is prevent a user from building only a subdriver,
without any interface driver. To that end, add an additional line of
help in the menu to guide users in the right direction.
Link: https://lore.kernel.org/all/202204110757.XIafvVnj-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: aac9400106 ("net: dsa: realtek: add new mdio interface for drivers")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously it was not possible to determine which code path was responsible
for generating a certain message after a call to the nfp_X messaging
definitions for cases of duplicate strings. We therefore modify nfp_err,
nfp_warn, nfp_info, nfp_dbg and nfp_printk to print the corresponding file
and line number where the nfp_X definition is used.
Signed-off-by: Dylan Muller <dylan.muller@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 7938f42181 ("dma-buf-map: Rename to iosys-map") already renamed
this file, but it got brought back by a merge.
Delete it for real this time.
Fixes: 30424ebae8 ("Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411134404.524776-1-kherbst@redhat.com
The struct dbs_data embeds a struct gov_attr_set and
the struct gov_attr_set embeds a kobject. Since every kobject must have
a release() method and we can't use kfree() to free it directly,
so introduce cpufreq_dbs_data_release() to release the dbs_data via
the kobject::release() method. This fixes the calltrace like below:
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34
WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
Modules linked in:
CPU: 12 PID: 810 Comm: sh Not tainted 5.16.0-next-20220120-yocto-standard+ #536
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : debug_print_object+0xb8/0x100
lr : debug_print_object+0xb8/0x100
sp : ffff80001dfcf9a0
x29: ffff80001dfcf9a0 x28: 0000000000000001 x27: ffff0001464f0000
x26: 0000000000000000 x25: ffff8000090e3f00 x24: ffff80000af60210
x23: ffff8000094dfb78 x22: ffff8000090e3f00 x21: ffff0001080b7118
x20: ffff80000aeb2430 x19: ffff800009e8f5e0 x18: 0000000000000000
x17: 0000000000000002 x16: 00004d62e58be040 x15: 013590470523aff8
x14: ffff8000090e1828 x13: 0000000001359047 x12: 00000000f5257d14
x11: 0000000000040591 x10: 0000000066c1ffea x9 : ffff8000080d15e0
x8 : ffff80000a1765a8 x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff800009e8c000 x4 : ffff800009e8c760 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001474ed040
Call trace:
debug_print_object+0xb8/0x100
__debug_check_no_obj_freed+0x1d0/0x25c
debug_check_no_obj_freed+0x24/0xa0
kfree+0x11c/0x440
cpufreq_dbs_governor_exit+0xa8/0xac
cpufreq_exit_governor+0x44/0x90
cpufreq_set_policy+0x29c/0x570
store_scaling_governor+0x110/0x154
store+0xb0/0xe0
sysfs_kf_write+0x58/0x84
kernfs_fop_write_iter+0x12c/0x1c0
new_sync_write+0xf0/0x18c
vfs_write+0x1cc/0x220
ksys_write+0x74/0x100
__arm64_sys_write+0x28/0x3c
invoke_syscall.constprop.0+0x58/0xf0
do_el0_svc+0x70/0x170
el0_svc+0x54/0x190
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
irq event stamp: 189006
hardirqs last enabled at (189005): [<ffff8000080849d0>] finish_task_switch.isra.0+0xe0/0x2c0
hardirqs last disabled at (189006): [<ffff8000090667a4>] el1_dbg+0x24/0xa0
softirqs last enabled at (188966): [<ffff8000080106d0>] __do_softirq+0x4b0/0x6a0
softirqs last disabled at (188957): [<ffff80000804a618>] __irq_exit_rcu+0x108/0x1a4
[ rjw: Because can be freed by the gov_attr_set_put() in
cpufreq_dbs_governor_exit() now, it is also necessary to put the
invocation of the governor ->exit() callback into the new
cpufreq_dbs_data_release() function. ]
Fixes: c443563036 ("cpufreq: governor: New sysfs show/store callbacks for governor tunables")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the IO-links to the device being removed from topology,
are not cleared. As a result, there would be dangling links left in
the KFD topology. This patch aims to fix the following:
1. Cleanup all IO links to the device being removed.
2. Ensure that node numbering in sysfs and nodes proximity domain
values are consistent after the device is removed:
a. Adding a device and removing a GPU device are made mutually
exclusive.
b. The global proximity domain counter is no longer required to be
an atomic counter. A normal 32-bit counter can be used instead.
3. Update generation_count to let user-mode know that topology has
changed due to device removal.
CC: Shuotao Xu <shuotaoxu@microsoft.com>
Reviewed-by: Shuotao Xu <shuotaoxu@microsoft.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MS_HYPERV with vega10 doesn't have the interface to process
request init data msg.
Check hypervisor type to not send the request for MS_HYPERV.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Alice Wong <shiwei.wong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A MAX_GPU_INSTANCE bits bitmap will suffice.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Extract update stream allocation table into link hwss as part of the
link hwss refactor work.
Reviewed-by: George Shen <George.Shen@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
creating a generic helper for AMD specific PSR-SU sink validation.
Moving the function to the power module to reference it across all
OS.
[how]
- drop PSRSU specific sink validation helper and move to power
module by reading PSR version and other PSR caps
- call the new helper from linux DM (amdgpu_dm_psr)
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
As per eDP 1.5 spec, add the below two DPCD bit fields for PSR-SU
support and capability:
1. DP_PSR2_WITH_Y_COORD_ET_SUPPORTED
2. DP_PSR2_SU_AUX_FRAME_SYNC_NOT_NEEDED
changes in v2
------------------
* fixed the typo
* explicitly list what DPCD bit fields are added
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver should use the pci_resource_len() to get the actual length of
pci bar, and compare it with the expect value. If the bar size is too
small (such as a broken device), the driver should return an error.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409143950.2570186-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel Raptor Lake-S has the same SPI serial flash controller as Alder
Lake-P. Add Raptor Lake-S PCI ID to the driver list of supported
devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20220411112116.53281-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Qualcomm SM8350 platform does, like the SM8450, provide a set of GPI
controllers with an ee-offset of 0x10000. Add this to the driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412212959.2385085-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the printk index feature. The primary motivation is to
explain that it is not creating KABI from particular printk() calls.
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Controller on newer SoCs like SM8450 have registers at at offset. Add
ee_offset to driver_data and add this compatible for the driver.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220406132508.1029348-3-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Newer platforms seem to have strict requirement for TRE flags which
causes transaction to timeout. This was resolved to missing chain and
link flag for duplex spi transaction.
So add these two flags.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220406132508.1029348-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmJWb5kRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvaZQgAlgXICEUZSq711XeKLMZ5Rv6z532ejcmT
hrgL8Dzru8NEx/+tdPwX/uhdUAzkwk0C7QwkbpzifE1nrQaqMwVFlKr2q0K43qeJ
xZoHCiMdShsClBlK9a/jZsa5/fnHFF9Pa0rNxCHGjQ46gRhkkwzf6fv722z/Zay9
MOKOv9+17Vrtpel2GlaMPsxRSQmzM4YSAbSfIz6HiUwt4VkuB2x9qxalHz7OfD27
fatWhwK1ZJui1tPRsB7dfrE8/0sg0t3Z2d7GarraFMCsaiCZRffYWz1OWy6P5ITo
8x4kgIewiggXBzpcsa8LQ9cleOE0gLZUdihJHgjWma3YX/tnns5Akg==
=hTYE
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.18
First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong says:
====================
net: ip: add skb drop reasons to ip ingress
In the series "net: use kfree_skb_reason() for ip/udp packet receive",
skb drop reasons are added to the basic ingress path of IPv4. And in
the series "net: use kfree_skb_reason() for ip/neighbour", the egress
paths of IPv4 and IPv6 are handled. Related links:
https://lore.kernel.org/netdev/20220205074739.543606-1-imagedong@tencent.com/https://lore.kernel.org/netdev/20220226041831.2058437-1-imagedong@tencent.com/
Seems we still have a lot work to do with IP layer, including IPv6 basic
ingress path, IPv4/IPv6 forwarding, IPv6 exthdrs, fragment and defrag,
etc.
In this series, skb drop reasons are added to the basic ingress path of
IPv6 protocol and IPv4/IPv6 packet forwarding. Following functions, which
are used for IPv6 packet receiving are handled:
ip6_pkt_drop()
ip6_rcv_core()
ip6_protocol_deliver_rcu()
And following functions that used for IPv6 TLV parse are handled:
ip6_parse_tlv()
ipv6_hop_ra()
ipv6_hop_ioam()
ipv6_hop_jumbo()
ipv6_hop_calipso()
ipv6_dest_hao()
Besides, ip_forward() and ip6_forward(), which are used for IPv4/IPv6
forwarding, are also handled. And following new drop reasons are added:
/* host unreachable, corresponding to IPSTATS_MIB_INADDRERRORS */
SKB_DROP_REASON_IP_INADDRERRORS
/* network unreachable, corresponding to IPSTATS_MIB_INADDRERRORS */
SKB_DROP_REASON_IP_INNOROUTES
/* packet size is too big, corresponding to
* IPSTATS_MIB_INTOOBIGERRORS
*/
SKB_DROP_REASON_PKT_TOO_BIG
In order to simply the definition and assignment for
'enum skb_drop_reason', some helper functions are introduced in the 1th
patch. I'm not such if this is necessary, but it makes the code simpler.
For example, we can replace the code:
if (reason == SKB_DROP_REASON_NOT_SPECIFIED)
reason = SKB_DROP_REASON_IP_INHDR;
with:
SKB_DR_OR(reason, IP_INHDR);
In the 6th patch, the statistics for skb in ipv6_hop_jum() is removed,
as I think it is redundant. There are two call chains for
ipv6_hop_jumbo(). The first one is:
ipv6_destopt_rcv() -> ip6_parse_tlv() -> ipv6_hop_jumbo()
On this call chain, the drop statistics will be done in
ipv6_destopt_rcv() with 'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo()
returns false.
The second call chain is:
ip6_rcv_core() -> ipv6_parse_hopopts() -> ip6_parse_tlv()
And the drop statistics will also be done in ip6_rcv_core() with
'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo() returns false.
Therefore, the statistics in ipv6_hop_jumbo() is redundant, which
means the drop is counted twice. The statistics in ipv6_hop_jumbo()
is almost the same as the outside, except the
'IPSTATS_MIB_INTRUNCATEDPKTS', which seems that we have to ignore it.
======================================================================
Here is a basic test for IPv6 forwarding packet drop that monitored by
'dropwatch' tool:
drop at: ip6_forward+0x81a/0xb70 (0xffffffff86c73f8a)
origin: software
input port ifindex: 7
timestamp: Wed Apr 13 11:51:06 2022 130010176 nsec
protocol: 0x86dd
length: 94
original length: 94
drop reason: IP_INADDRERRORS
The origin cause of this case is that IPv6 doesn't allow to forward the
packet with LOCAL-LINK saddr, and results the 'IP_INADDRERRORS' drop
reason.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in ip6_protocol_deliver_rcu() with
kfree_skb_reason().
No new reasons are added.
Some paths are ignored, as they are not common, such as encapsulation
on non-final protocol.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in ip6_rcv_core() with kfree_skb_reason().
No new drop reasons are added.
Seems now we use 'SKB_DROP_REASON_IP_INHDR' for too many case during
ipv6 header parse or check, just like what 'IPSTATS_MIB_INHDRERRORS'
do. Will it be too general and hard to know what happened?
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
