When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CC_ATTR_HOST_MEM_ENCRYPT is used to relay that memory encryption has been
activated by the kernel.
As it's technically possible to enable both SME and TSME at the same time,
detect this scenario and notify the user that enabling TSME and SME at the
same time is unnecessary.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously the PSP probe routine would fail if both SEV and TEE were
missing. This is possibly the case for some client parts.
As capabilities can now be accessed from userspace, it may still be
useful to have the PSP driver finish loading so that those capabilities
can be read.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PSP sets several pre-defined bits in the capabilities
register to indicate that security attributes of the platform.
Export these attributes into userspace for administrators to
confirm platform is properly locked down.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The results of the capability register will be used by future
code at runtime rather than just initialization.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As was established in the thread
https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/T/#u,
many crypto API users doing in-place en/decryption don't use the same
scatterlist pointers for the source and destination, but rather use
separate scatterlists that point to the same memory. This case isn't
tested by the self-tests, resulting in bugs.
This is the natural usage of the crypto API in some cases, so requiring
API users to avoid this usage is not reasonable.
Therefore, update the self-tests to start testing this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: 64b94ceae8 ("crypto: blowfish - add x86_64 assembly implementation")
Fixes: 676a38046f ("crypto: camellia-x86_64 - module init/exit functions should be static")
Fixes: 0b95ec56ae ("crypto: camellia - add assembler implementation for x86_64")
Fixes: 56d76c96a9 ("crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher")
Fixes: b9f535ffe3 ("[CRYPTO] twofish: i586 assembly version")
Fixes: ff0a70fe05 ("crypto: twofish-x86_64-3way - module init/exit functions should be static")
Fixes: 8280daad43 ("crypto: twofish - add 3-way parallel x86_64 assembler implemention")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Cc: Joachim Fritschi <jfritschi@freenet.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A 'dma_wmb' barrier is enough to guarantee previous writes
before accessing by acc device in the outer shareable domain.
A 'smp_wmb' barrier is enough to guarantee previous writes
before accessing by other cpus in the inner shareble domain.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the description of @need_pump in crypto_transfer_request() kernel-doc
comment to remove warning found by running scripts/kernel-doc, which is
caused by using 'make W=1'.
crypto/crypto_engine.c:260: warning: Function parameter or member
'need_pump' not described in 'crypto_transfer_request'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds ARMv8 NEON implementations of SM4 in ECB, CBC, CFB and CTR
modes. This implementation uses the plain NEON instruction set, All
S-BOX substitutions uses the tbl/tbx instructions of ARMv8, combined
with the out-of-order execution in CPU, this optimization supports
encryption of up to 8 blocks at the same time.
The performance of encrypting one block is not as good as software
implementation, so the encryption operations of CBC and CFB still
use pure software algorithms.
Benchmark on T-Head Yitian-710 2.75 GHz, the data comes from the 218
mode of tcrypt. The abscissas are blocks of different lengths. The
data is tabulated and the unit is Mb/s:
sm4-generic | 16 64 128 256 1024 1420 4096
ECB enc | 80.05 91.42 93.66 94.77 95.69 95.77 95.86
ECB dec | 79.98 91.41 93.64 94.76 95.66 95.77 95.85
CBC enc | 78.55 86.50 88.02 88.77 89.36 89.42 89.48
CBC dec | 76.82 89.06 91.52 92.77 93.75 93.83 93.96
CFB enc | 77.64 86.13 87.62 88.42 89.08 88.83 89.18
CFB dec | 77.57 88.34 90.36 91.45 92.34 92.00 92.44
CTR enc | 77.80 88.28 90.23 91.22 92.11 91.81 92.25
CTR dec | 77.83 88.22 90.22 91.22 92.04 91.82 92.28
sm4-neon
ECB enc | 28.31 112.77 203.03 209.89 215.49 202.11 210.59
ECB dec | 28.36 113.45 203.23 210.00 215.52 202.13 210.65
CBC enc | 79.32 87.02 88.51 89.28 89.85 89.89 89.97
CBC dec | 28.29 112.20 203.30 209.82 214.99 201.51 209.95
CFB enc | 79.59 87.16 88.54 89.30 89.83 89.62 89.92
CFB dec | 28.12 111.05 202.47 209.02 214.21 210.90 209.12
CTR enc | 28.04 108.81 200.62 206.65 211.78 208.78 206.74
CTR dec | 28.02 108.82 200.45 206.62 211.78 208.74 206.70
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The subsequent patches of the series will have an implementation
of SM4-ECB/CBC/CFB/CTR accelerated by the CE instruction set, which
conflicts with the current module name. In order to keep the naming
rules of the AES algorithm consistent, the sm4-ce algorithm is
renamed to sm4-ce-cipher.
In addition, the speed of sm4-ce-cipher is better than that of SM4
NEON. By the way, the priority of the algorithm is adjusted to 300,
which is also to leave room for the priority of SM4 NEON.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the constant arrays fk, ck, sbox of the SM4 algorithm, and
add the 'crypto_sm4_' prefix, where sbox is used in the SM4 NEON
implementation for the tbl/tbx instruction to replace the S-BOX,
and the fk, ck arrays are used in the SM4 CE implementation. Use
the sm4ekey instruction to speed up key expansion operations.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The lib/crypto libraries live in lib because they are used by various
drivers of the kernel. In contrast, the various helper functions in
crypto are there because they're used exclusively by the crypto API. The
SM3 and SM4 helper functions were erroniously moved into lib/crypto/
instead of crypto/, even though there are no in-kernel users outside of
the crypto API of those functions. This commit moves them into crypto/.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220407142159.293836-1-krzysztof.kozlowski@linaro.org
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220407142159.293836-2-krzysztof.kozlowski@linaro.org
Amlogic s4 device is already applied, but cpu compatible 'arm,armv8'
is only valid for software models, so we remove it.
Fixes: ac4dfd0d1d ("arm64: dts: add support for S4 based Amlogic AQ222")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220408070901.26446-1-xianwei.zhao@amlogic.com
$make versioncheck
arch/csky/include/asm/io.h: 8 linux/version.h not needed.
arch/csky/kernel/process.c: 5 linux/version.h not needed.
arch/csky/mm/dma-mapping.c: 12 linux/version.h not needed.
comments from Randy:
The patch makes sense but these are not compile warnings.
They come from scripts/checkversion.pl, which can be called
by 'make versioncheck', so I suppose that something in your
build system is running 'make versioncheck'.
Signed-off-by: Deyan Wang <wonder_rock@126.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
dma-fence:
- fix warning about fence containers
- fix logic error in new fence merge code
- handle empty dma_fence_arrays gracefully
bridge:
- Try all possible cases for bridge/panel detection.
bindings:
- Don't require input port for MIPI-DSI, and make width/height mandatory.
fbdev:
- Fix unregistering of framebuffers without device.
nouveau:
- Fix a crash when booting with nouveau on tegra.
amdgpu:
- GFX 10.3.7 fixes
- noretry updates
- VCN fixes
- TMDS fix
- zstate fix for freesync video
- DCN 3.1.5 fix
- Display stack size fix
- Audio fix
- DCN 3.1 pstate fix
- TMZ VCN fix
- APU passthrough fix
- Misc other fixes
- VCN 3.0 fixes
- Misc display fixes
- GC 10.3 golden register fix
- Suspend fix
- SMU 10 fix
amdkfd:
- Error handling fix
- xgmi p2p fix
- HWS VMIDs fix
- Event fix
panel:
- ili9341: Fix optional regulator handling
imx:
- Catch an EDID allocation failure in imx-ldb
- fix a leaked drm display mode on DT parsing error in parallel-display
- properly remove the dw_hdmi bridge in case the component_add fails in dw_hdmi-imx
- fix the IPU clock frequency debug printout in ipu-di.
-----BEGIN PGP SIGNATURE-----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=D6WR
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-04-08' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Main set of fixes for rc2, mostly amdgpu, but some dma-fence fixups as
well, along with some other misc ones.
dma-fence:
- fix warning about fence containers
- fix logic error in new fence merge code
- handle empty dma_fence_arrays gracefully
bridge:
- Try all possible cases for bridge/panel detection.
bindings:
- Don't require input port for MIPI-DSI, and make width/height mandatory.
fbdev:
- Fix unregistering of framebuffers without device.
nouveau:
- Fix a crash when booting with nouveau on tegra.
amdgpu:
- GFX 10.3.7 fixes
- noretry updates
- VCN fixes
- TMDS fix
- zstate fix for freesync video
- DCN 3.1.5 fix
- Display stack size fix
- Audio fix
- DCN 3.1 pstate fix
- TMZ VCN fix
- APU passthrough fix
- Misc other fixes
- VCN 3.0 fixes
- Misc display fixes
- GC 10.3 golden register fix
- Suspend fix
- SMU 10 fix
amdkfd:
- Error handling fix
- xgmi p2p fix
- HWS VMIDs fix
- Event fix
panel:
- ili9341: Fix optional regulator handling
imx:
- Catch an EDID allocation failure in imx-ldb
- fix a leaked drm display mode on DT parsing error in parallel-display
- properly remove the dw_hdmi bridge in case the component_add fails in dw_hdmi-imx
- fix the IPU clock frequency debug printout in ipu-di"
* tag 'drm-fixes-2022-04-08' of git://anongit.freedesktop.org/drm/drm: (61 commits)
dt-bindings: display: panel: mipi-dbi-spi: Make width-mm/height-mm mandatory
fbdev: Fix unregistering of framebuffers without device
drm/amdgpu/smu10: fix SoC/fclk units in auto mode
drm/amd/display: update dcn315 clock table read
drm/amdgpu/display: change pipe policy for DCN 2.1
drm/amd/display: Add configuration options for AUX wake work around.
drm/amd/display: remove assert for odm transition case
drm/amdgpu: don't use BACO for reset in S3
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
drm/amdkfd: Create file descriptor after client is added to smi_clients list
drm/amdgpu: Sync up header and implementation to use the same parameter names
drm/amdgpu: fix incorrect GCR_GENERAL_CNTL address
amd/display: set backlight only if required
drm/amd/display: Fix allocate_mst_payload assert on resume
drm/amd/display: Revert FEC check in validation
drm/amd/display: Add work around for AUX failure on wake.
drm/amd/display: Clear optc false state when disable otg
drm/amd/display: Enable power gating before init_pipes
drm/amd/display: Remove redundant dsc power gating from init_hw
drm/amd/display: Correct Slice reset calculation
...
-----BEGIN PGP SIGNATURE-----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=wy77
-----END PGP SIGNATURE-----
Merge tag '5.18-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
- reconnect fixes: one for DFS and one to avoid a reconnect race
- small change to deal with upcoming behavior change of list iterators
* tag '5.18-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: force new session setup and tcon for dfs
cifs: remove check of list iterator against head past the loop body
cifs: fix potential race with cifsd thread
That being useful for debugging purposes.
Notice that the packet descriptor is in "private" guest memory, so
that Hyper-V can not tamper with it.
While at it, remove two unnecessary u64-casts.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The define for_each_pci_dev(d) is:
while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
Thus, the list iterator 'd' is always non-NULL so it doesn't need to
be checked. So just remove the unnecessary NULL check. Also remove the
unnecessary initializer because the list iterator is always initialized.
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220406015921.29267-1-xiam0nd.tong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device
we care about. It appears that what we care about here is specifically
whether DMA mapping ops involve any IOMMU overhead or not, so check for
translation actually being active for our device.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/7350f957944ecfce6cce90f422e3992a1f428775.1649166055.git.robin.murphy@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As noted in the original commit 685343fc3b ("net: add
name_assign_type netdev attribute")
... when the kernel has given the interface a name using global
device enumeration based on order of discovery (ethX, wlanY, etc)
... are labelled NET_NAME_ENUM.
That describes this case, so set the default for the devices here to
NET_NAME_ENUM. Current popular network setup tools like systemd use
this only to warn if you're setting static settings on interfaces that
might change, so it is expected this only leads to better user
information, but not changing of interfaces, etc.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Link: https://lore.kernel.org/r/20220406093635.1601506-1-iwienand@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BPF_USDT_ARG_REG_DEREF handling always reads 8 bytes, regardless of
the actual argument size. On little-endian the relevant argument bits
end up in the lower bits of val, and later on the code that handles
all the argument types expects them to be there.
On big-endian they end up in the upper bits of val, breaking that
expectation. Fix by right-shifting val on big-endian.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-3-iii@linux.ibm.com
Fix several typos and references to non-existing headers.
Also use __BYTE_ORDER__ instead of __BYTE_ORDER for consistency with
the rest of the bpf code - see commit 45f2bebc80 ("libbpf: Fix
endianness detection in BPF_CORE_READ_BITFIELD_PROBED()") for
rationale).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-2-iii@linux.ibm.com
The congestion status of a tcp flow may be updated since there
is congestion between tcp sender and receiver. It makes sense to
add tracepoint for congestion status set function to summate cc
status duration and evaluate the performance of network
and congestion algorithm. the backgound of this patch is below.
Link: https://github.com/iovisor/bcc/pull/3899
Signed-off-by: Ping Gan <jacky_gam_2001@163.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220406010956.19656-1-jacky_gam_2001@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increment rx_otherhost_dropped counter when packet dropped due to
mismatched dest MAC addr.
An example when this drop can occur is when manually crafting raw
packets that will be consumed by a user space application via a tap
device. For testing purposes local traffic was generated using trafgen
for the client and netcat to start a server
Tested: Created 2 netns, sent 1 packet using trafgen from 1 to the other
with "{eth(daddr=$INCORRECT_MAC...}", verified that iproute2 showed the
counter was incremented. (Also had to modify iproute2 to show the stat,
additional patch for that coming next.)
Signed-off-by: Jeffrey Ji <jeffreyji@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220406172600.1141083-1-jeffreyjilinux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
net: create a net/core/ internal header
We are adding stuff to netdevice.h which really should be
local to net/core/. Create a net/core/dev.h header and use it.
Minor cleanups precede.
====================
Link: https://lore.kernel.org/r/20220406213754.731066-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a number of functions and static variables used
under net/core/ but not from the outside. We currently
dump most of them into netdevice.h. That bad for many
reasons:
- netdevice.h is very cluttered, hard to figure out
what the APIs are;
- netdevice.h is very long;
- we have to touch netdevice.h more which causes expensive
incremental builds.
Create a header under net/core/ and move some declarations.
The new header is also a bit of a catch-all but that's
fine, if we create more specific headers people will
likely over-think where their declaration fit best.
And end up putting them in netdevice.h, again.
More work should be done on splitting netdevice.h into more
targeted headers, but that'd be more time consuming so small
steps.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have a bunch of functions which are only used under
net/core/ yet they get exported. Remove the exports.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following patch will hide that typedef. There seems to be
no strong reason for hyperv to use it, so let's not.
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the building of the sm8250 video clock controller by default.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131202721.2122605-2-dmitry.baryshkov@linaro.org
Enable coincell, fastrpc, mailbox and adc-tm5 drivers to be built as
modules. These driver are used on many of Qualcomm platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131165056.2117434-1-dmitry.baryshkov@linaro.org
CONFIG_SM_DISPCC_8250 is not enabled by default, but it is still
necessary for the Qualcomm RB5 board. Reenable it (as it was enabled
before the commit dde8cd786e ("arm64: defconfig: rebuild default
configuration")).
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fixes: dde8cd786e ("arm64: defconfig: rebuild default configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220404215913.1497172-1-dmitry.baryshkov@linaro.org
Enable CONFIG_SND_SOC_WCD9335 to built as module. This enable audio
codec used on the Qualcomm Dragonboard820c device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220403211329.1410725-1-dmitry.baryshkov@linaro.org
Enable the driver for the Qualcomm random number generator and the
userspace crypto API.
This was a tested on a Nexus 5 phone (msm8974 SoC).
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220311154919.1797920-2-bmasney@redhat.com
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220324072435.63070-1-jakobkoschel@gmail.com
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308073648.24634-1-linmq006@gmail.com
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 50e9964141 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308071942.22942-1-linmq006@gmail.com
