While we currently assume that regulators with no control available are
just uncontionally enabled this isn't always as clearly displayed to
users as is desirable, for example the code for disabling unused
regulators will log that it is about to disable them. Clean this up a
bit by setting always_on during constraint evaluation if we have no
available mechanism for controlling the regualtor so things that check
the constraint will do the right thing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220325144637.1543496-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch support hclk for AHB bus.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220321013922.24067-3-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch adds hclk support.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220321013922.24067-4-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch add the support of spi-mem for ipm design.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220321013922.24067-2-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct grammar in 'enable-gpios' description and remove useless comment
about regulator nodes, because these are obvious from patternProperties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220401153711.1057853-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If spi_register_master() fails, we must undo a previous
mxic_spi_mem_ecc_probe() call, as already done in the remove function.
Fixes: 00360ebae4 ("spi: mxic: Add support for pipelined ECC operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/09c81f751241f6ec0bac7a48d4ec814a742e0d17.1648980664.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Add buck_vcore_sshub and ldo_vsram_others_sshub
regulators to binding document for MT6358 and MT6366.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220317030402.24894-3-johnson.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6366 is a regulator found on boards based on MediaTek MT8186 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220317030402.24894-2-johnson.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of these is to pass their address to __regmap_init() or
__devm_regmap_init(), both which takes pointers to const struct
regmap_bus. Make them const to allow the compiler to put them in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20220330214110.36337-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds compatible string "mediatek,mt8195-mt6359-max98390-rt5682"
to support mt8195 board with mt6359, max98390 and rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220324053851.27350-7-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for mt8195 board with mt6359, max98390 and
rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220324053851.27350-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to be able to reuse the same configurations in user space,
rename the controls to generic names.
"Headphone Jack" -> "Headphone"
"Speakers" -> "Ext Spk"
"Left Speaker" -> "Left Spk"
"Right Speaker" -> "Right SPk"
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because the same binding components can be shared by all codecs
combinations, we only reserve one binding file for mt8195 machine driver
and rename to a generic name.
We use compatible string to separate different codec combination instead
of creating a new binding file for new codec combination.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220324053851.27350-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because most functions can be reused in different codec combinations,
mt8195 machine drivers are combined to one common file.
The model and compatible string are used to decide which codecs are
being used.
As a result, We can prevent from copy-paste functions when new codec
combination is introduced.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revise driver for the coming driver combination.
There are two major parts including in the patch.
1. Apply some suggested changes used in mt8195-mt6359-rt1011-rt5682.c.
2. Reorder the layout for centralizing the codec related code.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8731 driver has been refactored so the I2C and SPI bus code is
separate modules. Refresh multi_v5_defconfig to reflect this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: soc@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-8-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the WM8731 DT bindings to YAML format, including addition of
documentation for the regulator and clock bindings which the driver has
had for some time but which were not covered in the bindings document.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220325153121.1598494-7-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Placing both the I2C and SPI code in the same module causes problems with
mixes of modular and non-modular builds of the buses so it's generally bad
practice. As with other drivers split the bus code out of the WM8731 driver
into separate modules.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The code for initialising the MCLK and mutex is identical in the I2C and SPI
probe functions so just move this out into wm8731_init().
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The supplies used by the wm8731 do not depend on the bus and there is no
need to do anything with the supplies prior to instantiating the regmap so
move the request into wm8731_init().
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the I2C and SPI bus code register the component immediately after they
call wm8731_hw_init(), factor the code out into the the common function and
rename it to just be plain wm8731_init() while we're at it since it's not
just for hardware init any more. This refactoring means we need to move the
function after the declaration of the component driver.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of retiring the old defines used to specify DAI formats update the
wm8731 driver to use the modern names.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Other functions used for callbacks are named after function they call,
however function calling control_load seems to be an exception. Rename
it to soc_tplg_control_load().
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Error message refers to mixer, but it is used for various other types of
controls, so change it to refer to generic "controls".
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Name of SOC_TPLG_PASS_MIXER pass is bit confusing, suggesting that it
may only apply to mixers. As it is used for all control types, change
name to SOC_TPLG_PASS_CONTROL.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In practice soc_tplg_is_eof() returns boolean value and caller uses the
return value in such way, so convert the function to really do it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Functions creating kcontrols as written allow for creation of multiple
kcontrols at the same time, but in practice they are called for each
kcontrol individually. Remove unnecessary loop as code always loops once
anyway. This reduces intendation level allowing for some code to be put
on one line instead of multiple lines.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'while' loop can be replaced with a 'for' loop, making it more clear
about what possible values there are, by having all of it in one place,
instead of scattered around.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add AHUB routes for ASRC module. The ASRC module can be plugged into audio
path as per the need. The routing controls can be used to setup the audio
path with ASRC similar to the already existing routes. The routes are added
to Tegra186 and later Tegra SoCs where ASRC module is present.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
of the input signal from one frequency to another. It can handle over a
wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
ASRC has two modes of operation. One where ratio can be programmed in SW
and the other where it gets the information from ratio estimator module.
The latter mode above can help address the cases where the sample rate is
not known at the stream set up time or is potentially time varying.
In addition, the ratio between input and output sample rate can be any
arbitrary number and the input and output clocks could be derived from
asynchronous clocks.
This patch registers ASRC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes ASRC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds YAML schema for DT bindings of Asynchronous Sample Rate
Converter (ASRC) module. It will be registered as an ASoC component and
can be plugged into an audio path as per need via ALSA mixer controls.
The bindings are applicable on Tegra186 and later where the ASRC device
is present.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After the free PCM action is executed, no matter what
the return result is, it will return directly in sof_pcm_trigger.
So the return statement here is redundant.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header field is no longer used by the underlying code and
can be dropped from the snd_sof_ipc_msg struct.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header parameter is not used anymore and now it can be dropped from
the parameter list of tx_message().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a local reply to first read out the header from the
mailbox then memcpy it or read it again to msg->reply_data, read it
directly to it's final place from the start.
If we received an error we do not need to do a memcpy anymore.
If the reply is reporting a success then we don not need to read the reply
again from the mailbox if the reply_size equals to the already read header
size.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system enters s0ix, the dma trace won't be used. Otherwise,
the DMA will access the host memory, which will prevent entering
S0ix. Driver has notified firmware not to send message through
dma trace. Let's also trigger stop dma trace in driver side.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the interface to stop the DMA trace for suspend. Replace the
snd_sof_init_trace_ipc() and snd_sof_release_trace() calls with more
explicit interface for PM (the sole user for this interface).
The new snd_sof_trace_suspend() call takes the target PM state as argument,
allowing the trace implementation to decide how to handle the transition.
Use this information to release DMA resources only if DSP is suspended and
will not remain in D0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Access through mmapped memory is not supported and it is explicitly
disabled with scontrol->readback_offset = 0; when a control is created.
Remove the dead code and the confusion around this feature.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the ipc->max_payload_size for validating that the message or reply
size can be supported.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The max_payload_size is an IPC level constraint. Add a new field,
max_payload_size to struct snd_sof_ipc and set it during IPC init.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dmab and dmab_bdl is not used by any platform, it can be removed from
struct snd_sof_dev.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to use the sdev->dmab and sdev->dmab_bdl as the buffers
are only used locally: allocated used and freed in the same function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The active_discharge_on setting was missed, so output discharge resistor
is always disabled. Fix it.
Fixes: 0555d41497 ("regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20220404022514.449231-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit corrects the printing of the IPU clock error percentage if
it is between -0.1% to -0.9%. For example, if the pixel clock requested
is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%.
But the fixed point math had a flaw and calculated error of 0.2%.
Before:
Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
IPU clock can give 27000000 with divider 10, error 0.2%
Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After:
Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
IPU clock can give 27000000 with divider 10, error -0.8%
Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
In dw_hdmi_imx_probe(), if error happens after dw_hdmi_probe() returns
successfully, dw_hdmi_remove() should be called where necessary as
bailout.
Fixes: c805ec7eb2 ("drm/imx: dw_hdmi-imx: move initialization into probe")
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220128091944.3831256-1-victor.liu@nxp.com
