Instead of having two separated arrays, one for the urbs and
one for their buffers, have one array of a struct containing both.
In addition, the array is just 16 pointers, no need to dynamically
allocate it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In case we fail to allocate a transfer_buffer then we
break the buffers creation loop and update the number of
buffers to the number of successfully allocated which should
be 'i' and not 'i - 1' nor 'i + 1'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The i.MX8MM has a Hantro G1 video decoder similar to the
imx8mq but lacks the post-processor present in the imx8mq.
Add support in the driver for it with the post-processing
removed.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The i.MX8M mini appears to have a similar G1 decoder but the
post-processing isn't present, so different compatible flag is required.
Since all the other parameters are the same with imx8mq, just add
the new compatible flag to nxp,imx8mq-vpu.yaml.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The VPU in the i.MX8MQ is really the combination of Hantro G1 and
Hantro G2. With the updated vpu-blk-ctrl, the power domains system
can enable and disable them separately as well as pull them out of
reset. This simplifies the code and lets them run independently
while still retaining backwards compatibility with older device
trees for those using G1.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The G1 and G2 are independent and separate decoder blocks
that are enabled by the vpu-blk-ctrl power-domain controller,
which now has a proper driver.
Because these blocks only share the power-domain, and can be
independently fused out, update the bindings to support separate
nodes for the G1 and G2 decoders with vpu-blk-ctrl power-domain
support.
The new DT + old kernel isn't a supported configuration.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Newlines were missing in almost all regular and debug printk.
Signed-off-by: Ettore Chimenti <ek5.chimenti@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This reverts commit 2c98b8a345.
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian
reported [1]. Since quick solution didn't come up let's just revert it
to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/ [1]
Reported-by: Maximilian Böhm <maximilian.boehm@elbmurf.de>
Tested-by: Maximilian Böhm <maximilian.boehm@elbmurf.de>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The HFI_PROPERTY_PARAM_VENC_HDR10_PQ_SEI HFI property is not supported
on Venus v1 and v3.
cc: stable@vger.kernel.org # 5.13+
Fixes: 9172652d72 ("media: venus: venc: Add support for CLL and Mastering display controls")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
During encoder driver open controls are initialized via a call
to v4l2_ctrl_handler_setup which returns EINVAL error for
V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM v4l2 control. The control
default value is disabled and because of firmware limitations
8x8 transform cannot be disabled for the supported HIGH and
CONSTRAINED_HIGH profiles.
To fix the issue change the control default value to enabled
(this is fine because the firmware enables 8x8 transform for
high and constrained_high profiles by default). Also, correct
the checking of profile ids in s_ctrl from hfi to v4l2 ids.
cc: stable@vger.kernel.org # 5.15+
Fixes: bfee75f73c ("media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The venus_helper_alloc_dpb_bufs() implementation allows an early return
on an error path when checking the id from ida_alloc_min() which would
not release the earlier buffer allocation.
Move the direct kfree() from the error checking of dma_alloc_attrs() to
the common fail path to ensure that allocations are released on all
error paths in this function.
Addresses-Coverity: 1494120 ("Resource leak")
cc: stable@vger.kernel.org # 5.16+
Fixes: 40d87aafee ("media: venus: vdec: decoded picture buffer handling during reconfig sequence")
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Describe missing structure members:
core.h: warning: Function parameter or member
'sys_err_done' not described in 'venus_core'
'fw_min_cnt' not described in 'venus_inst'
'flags' not described in 'venus_inst'
'dpb_ids' not described in 'venus_inst'
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the vm doesn't request async binding, like for example with the dpt,
then we should be able to skip the async path and avoid calling
i915_vm_lock_objects() altogether. Currently if we have a moving fence
set for the BO(even though it might have signalled), we still take the
async patch regardless of the bind_async setting, and then later still
end up just doing i915_gem_object_wait_moving_fence() anyway.
Alternatively we would need to add dummy scratch object which can be
locked, just for the dpt.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304095934.925036-2-matthew.auld@intel.com
Since we are actually mapping the object and not the vma, when dealing
with LMEM, we should be careful and use the backing store size here,
since the vma->node.size could have all kinds of funny padding
constraints, which could result in us writing to OOB address.
v2(Chris):
- Prefer vma->size here, which should be the backing store size. Some
more rework is needed here to stop using node.size in some other
places.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304095934.925036-1-matthew.auld@intel.com
When calling gnttab_end_foreign_access_ref() the returned value must
be tested and the reaction to that value should be appropriate.
In case of failure in xennet_get_responses() the reaction should not be
to crash the system, but to disable the network device.
The calls in setup_netfront() can be replaced by calls of
gnttab_end_foreign_access(). While at it avoid double free of ring
pages and grant references via xennet_disconnect_backend() in this case.
This is CVE-2022-23042 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- avoid double free
V3:
- remove pointless initializer (Jan Beulich)
gnttab_end_foreign_access() is used to free a grant reference and
optionally to free the associated page. In case the grant is still in
use by the other side processing is being deferred. This leads to a
problem in case no page to be freed is specified by the caller: the
caller doesn't know that the page is still mapped by the other side
and thus should not be used for other purposes.
The correct way to handle this situation is to take an additional
reference to the granted page in case handling is being deferred and
to drop that reference when the grant reference could be freed
finally.
This requires that there are no users of gnttab_end_foreign_access()
left directly repurposing the granted page after the call, as this
might result in clobbered data or information leaks via the not yet
freed grant reference.
This is part of CVE-2022-23041 / XSA-396.
Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V4:
- expand comment in header
V5:
- get page ref in case of kmalloc() failure, too
Instead of __get_free_pages() and free_pages() use alloc_pages_exact()
and free_pages_exact(). This is in preparation of a change of
gnttab_end_foreign_access() which will prohibit use of high-order
pages.
This is part of CVE-2022-23041 / XSA-396.
Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V4:
- new patch
Instead of __get_free_pages() and free_pages() use alloc_pages_exact()
and free_pages_exact(). This is in preparation of a change of
gnttab_end_foreign_access() which will prohibit use of high-order
pages.
By using the local variable "order" instead of ring->intf->ring_order
in the error path of xen_9pfs_front_alloc_dataring() another bug is
fixed, as the error path can be entered before ring->intf->ring_order
is being set.
By using alloc_pages_exact() the size in bytes is specified for the
allocation, which fixes another bug for the case of
order < (PAGE_SHIFT - XEN_PAGE_SHIFT).
This is part of CVE-2022-23041 / XSA-396.
Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V4:
- new patch
The usage of gnttab_end_foreign_access() in xenhcd_gnttab_done() is
not safe against a malicious backend, as the backend could keep the
I/O page mapped and modify it even after the granted memory page is
being used for completely other purposes in the local system.
So replace that use case with gnttab_try_end_foreign_access() and
disable the PV host adapter in case the backend didn't stop using the
granted page.
In xenhcd_urb_request_done() immediately return in case of setting
the device state to "error" instead of looking into further backend
responses.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- use gnttab_try_end_foreign_access()
Remove gnttab_query_foreign_access(), as it is unused and unsafe to
use.
All previous use cases assumed a grant would not be in use after
gnttab_query_foreign_access() returned 0. This information is useless
in best case, as it only refers to a situation in the past, which could
have changed already.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Using gnttab_query_foreign_access() is unsafe, as it is racy by design.
The use case in the gntalloc driver is not needed at all. While at it
replace the call of gnttab_end_foreign_access_ref() with a call of
gnttab_end_foreign_access(), which is what is really wanted there. In
case the grant wasn't used due to an allocation failure, just free the
grant via gnttab_free_grant_reference().
This is CVE-2022-23039 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V3:
- fix __del_gref() (Jan Beulich)
It isn't enough to check whether a grant is still being in use by
calling gnttab_query_foreign_access(), as a mapping could be realized
by the other side just after having called that function.
In case the call was done in preparation of revoking a grant it is
better to do so via gnttab_try_end_foreign_access() and check the
success of that operation instead.
This is CVE-2022-23038 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- use gnttab_try_end_foreign_access()
It isn't enough to check whether a grant is still being in use by
calling gnttab_query_foreign_access(), as a mapping could be realized
by the other side just after having called that function.
In case the call was done in preparation of revoking a grant it is
better to do so via gnttab_end_foreign_access_ref() and check the
success of that operation instead.
This is CVE-2022-23037 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- use gnttab_try_end_foreign_access()
V3:
- don't use gnttab_try_end_foreign_access()
It isn't enough to check whether a grant is still being in use by
calling gnttab_query_foreign_access(), as a mapping could be realized
by the other side just after having called that function.
In case the call was done in preparation of revoking a grant it is
better to do so via gnttab_end_foreign_access_ref() and check the
success of that operation instead.
For the ring allocation use alloc_pages_exact() in order to avoid
high order pages in case of a multi-page ring.
If a grant wasn't unmapped by the backend without persistent grants
being used, set the device state to "error".
This is CVE-2022-23036 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
---
V2:
- use gnttab_try_end_foreign_access()
V4:
- use alloc_pages_exact() and free_pages_exact()
- set state to error if backend didn't unmap (Roger Pau Monné)
Add a new grant table function gnttab_try_end_foreign_access(), which
will remove and free a grant if it is not in use.
Its main use case is to either free a grant if it is no longer in use,
or to take some other action if it is still in use. This other action
can be an error exit, or (e.g. in the case of blkfront persistent grant
feature) some special handling.
This is CVE-2022-23036, CVE-2022-23038 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- new patch
V4:
- add comments to header (Jan Beulich)
Letting xenbus_grant_ring() tear down grants in the error case is
problematic, as the other side could already have used these grants.
Calling gnttab_end_foreign_access_ref() without checking success is
resulting in an unclear situation for any caller of xenbus_grant_ring()
as in the error case the memory pages of the ring page might be
partially mapped. Freeing them would risk unwanted foreign access to
them, while not freeing them would leak memory.
In order to remove the need to undo any gnttab_grant_foreign_access()
calls, use gnttab_alloc_grant_references() to make sure no further
error can occur in the loop granting access to the ring pages.
It should be noted that this way of handling removes leaking of
grant entries in the error case, too.
This is CVE-2022-23040 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add support s4 Power controller. In s4, power control
registers are in secure domain, and should be accessed by smc.
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220307025357.1368673-3-shunzhou.jiang@amlogic.com
Add the bindings for the Amlogic Secure power domains, controlling the
secure power domains.
The bindings targets the Amlogic s4, in which the power domains registers
are in secure world.
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220307025357.1368673-2-shunzhou.jiang@amlogic.com
Now that i915_vma_parked() is taking the object lock on vma destruction,
and the only user of the vma refcount, i915_gem_object_unbind()
also takes the object lock, remove the vma refcount.
v3: Documentation update.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-3-thomas.hellstrom@linux.intel.com
vms are not getting properly closed. Rather than fixing that,
Remove the vm open count and instead rely on the vm refcount.
The vm open count existed solely to break the strong references the
vmas had on the vms. Now instead make those references weak and
ensure vmas are destroyed when the vm is destroyed.
Unfortunately if the vm destructor and the object destructor both
wants to destroy a vma, that may lead to a race in that the vm
destructor just unbinds the vma and leaves the actual vma destruction
to the object destructor. However in order for the object destructor
to ensure the vma is unbound it needs to grab the vm mutex. In order
to keep the vm mutex alive until the object destructor is done with
it, somewhat hackishly grab a vm_resv refcount that is released late
in the vma destruction process, when the vm mutex is no longer needed.
v2: Address review-comments from Niranjana
- Clarify that the struct i915_address_space::skip_pte_rewrite is a hack
and should ideally be replaced in an upcoming patch.
- Remove an unneeded continue in clear_vm_list and update comment.
v3:
- Documentation update
- Commit message formatting
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-2-thomas.hellstrom@linux.intel.com
When CONFIG_MCF_EDMA is set (due to COMPILE_TEST, not due to
CONFIG_M5441x), coldfire/device.c has compile errors due to
missing MCFEDMA_* symbols. In the .config file that was provided,
CONFIG_M5206=y, not CONFIG_M5441x, so <asm/m5441xsim.h> is not
included in coldfire/device.c.
Only build the MCF_EDMA code in coldfire/device.c if the MCFEDMA_*
hardware macros are defined.
Fixes these build errors:
../arch/m68k/coldfire/device.c:512:35: error: 'MCFEDMA_BASE' undeclared here (not in a function); did you mean 'MCFDMA_BASE1'?
512 | .start = MCFEDMA_BASE,
../arch/m68k/coldfire/device.c:513:50: error: 'MCFEDMA_SIZE' undeclared here (not in a function)
513 | .end = MCFEDMA_BASE + MCFEDMA_SIZE - 1,
../arch/m68k/coldfire/device.c:517:35: error: 'MCFEDMA_IRQ_INTR0' undeclared here (not in a function)
517 | .start = MCFEDMA_IRQ_INTR0,
../arch/m68k/coldfire/device.c:523:35: error: 'MCFEDMA_IRQ_INTR16' undeclared here (not in a function)
523 | .start = MCFEDMA_IRQ_INTR16,
../arch/m68k/coldfire/device.c:529:35: error: 'MCFEDMA_IRQ_INTR56' undeclared here (not in a function)
529 | .start = MCFEDMA_IRQ_INTR56,
../arch/m68k/coldfire/device.c:535:35: error: 'MCFEDMA_IRQ_ERR' undeclared here (not in a function)
535 | .start = MCFEDMA_IRQ_ERR,
Fixes: d7e9d01ac2 ("m68k: add ColdFire mcf5441x eDMA platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202203030252.P752DK46-lkp@intel.com
Cc: Angelo Dureghello <angelo@sysam.it>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Sparse reports the following warnings:
arch/m68k/68000/ucsimm.c:19:15: sparse: sparse: symbol 'cs8900a_hwaddr' was not declared. Should it be static?
arch/m68k/68000/ucsimm.c:22:1: sparse: sparse: symbol 'getserialnum' was not declared. Should it be static?
arch/m68k/68000/ucsimm.c:23:1: sparse: sparse: symbol 'gethwaddr' was not declared. Should it be static?
arch/m68k/68000/ucsimm.c:24:1: sparse: sparse: symbol 'getbenv' was not declared. Should it be static?
'cs8900a_hwaddr' is not used anywhere else in the kernel, so it can be
removed.
All of 'getserialnum', 'gethwaddr' and 'getbenv' are only used in this
file, so they can all be made static. It turns out that these also cause
compiler warnings like this too:
arch/m68k/68000/ucsimm.c:22:15: warning: no previous prototype for 'getserialnum' [-Wmissing-prototypes]
Also fixed by making them all static.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
The 'screen_bits' LCD initializer bit array is only required if
CONFIG_INIT_LCD is enabled, otherwise we get the following warning:
arch/m68k/68000/screen.h:4:22: warning: 'screen_bits' defined but not used [-Wunused-variable]
static unsigned char screen_bits[] = {
^~~~~~~~~~~
Make the inclusion of 'screen_bits' conditional on CONFIG_INIT_LCD.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Fix the compile time warning:
arch/m68k/68000/dragen2.c:38:13: warning: no previous prototype for 'init_dragen2' [-Wmissing-prototypes]
38 | void __init init_dragen2(char *command, int size)
| ^~~~~~~~~~~~
There already exists a header file prototype, but that file was not
included in the dragen2.c code.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
early_read_config_byte() and similar are declared but never defined.
Remove the unused declarations.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Message-Id: <20220121210258.1152803-1-helgaas@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The strlcpy should not be used because it doesn't limit the source
length. So that it will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, replace strlcpy with strscpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20211220084756.955307-1-wangborong@cdjrlc.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The strlcpy should not be used because it doesn't limit the source
length. So that it will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, replace strlcpy with strscpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20211220084602.952091-1-wangborong@cdjrlc.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
refcount_t complains about 0->1 transitions, which isn't *quite* what we
wanted. So use dirtyfb==1 to mean that the fb is not connected to any
output that requires dirtyfb flushing, so that we can keep the underflow
and overflow checking.
Fixes: 9e4dde28e9 ("drm/msm: Avoid dirtyfb stalls on video mode displays (v2)")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304202146.845566-1-robdclark@gmail.com
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.
Add comments to clarify the purpose of the empty elements.
Rewrap entries to a single line to have a consistent style.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> [ahci_brcm]
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
When new work is created that requires attention from the hypervisor
(e.g., to inject an interrupt into the guest), fast_vcpu_kick is used to
pull the target vcpu out of the guest if it may have been running.
Therefore the work creation side looks like this:
vcpu->arch.doorbell_request = 1;
kvmppc_fast_vcpu_kick_hv(vcpu) {
smp_mb();
cpu = vcpu->cpu;
if (cpu != -1)
send_ipi(cpu);
}
And the guest entry side *should* look like this:
vcpu->cpu = smp_processor_id();
smp_mb();
if (vcpu->arch.doorbell_request) {
// do something (abort entry or inject doorbell etc)
}
But currently the store and load are flipped, so it is possible for the
entry to see no doorbell pending, and the doorbell creation misses the
store to set cpu, resulting lost work (or at least delayed until the
next guest exit).
Fix this by reordering the entry operations and adding a smp_mb
between them. The P8 path appears to have a similar race which is
commented but not addressed yet.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220303053315.1056880-2-npiggin@gmail.com
Our skiroot_defconfig doesn't enable FTRACE, and so doesn't get
STACKTRACE enabled either. That leads to a build failure since commit
1614b2b11f ("arch: Make ARCH_STACKWALK independent of STACKTRACE")
made stacktrace.c build even when STACKTRACE=n.
arch/powerpc/kernel/stacktrace.c: In function ‘handle_backtrace_ipi’:
arch/powerpc/kernel/stacktrace.c:171:2: error: implicit declaration of function ‘nmi_cpu_backtrace’
171 | nmi_cpu_backtrace(regs);
| ^~~~~~~~~~~~~~~~~
arch/powerpc/kernel/stacktrace.c: In function ‘arch_trigger_cpumask_backtrace’:
arch/powerpc/kernel/stacktrace.c:226:2: error: implicit declaration of function ‘nmi_trigger_cpumask_backtrace’
226 | nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This happens because our headers haven't defined
arch_trigger_cpumask_backtrace, which causes lib/nmi_backtrace.c not to
build nmi_cpu_backtrace().
The code in question doesn't actually depend on STACKTRACE=y, that was
just added because arch_trigger_cpumask_backtrace() lived in
stacktrace.c for convenience. So drop the dependency on
CONFIG_STACKTRACE, that causes lib/nmi_backtrace.c to build
nmi_cpu_backtrace() etc. and fixes the build.
Fixes: 1614b2b11f ("arch: Make ARCH_STACKWALK independent of STACKTRACE")
[mpe: Cherry pick of 5a72345e6a from next into fixes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220212111349.2806972-1-mpe@ellerman.id.au
-----BEGIN PGP SIGNATURE-----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=Bd5z
-----END PGP SIGNATURE-----
Merge tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes for various problems that have user visible effects
or seem to be urgent:
- fix corruption when combining DIO and non-blocking io_uring over
multiple extents (seen on MariaDB)
- fix relocation crash due to premature return from commit
- fix quota deadlock between rescan and qgroup removal
- fix item data bounds checks in tree-checker (found on a fuzzed
image)
- fix fsync of prealloc extents after EOF
- add missing run of delayed items after unlink during log replay
- don't start relocation until snapshot drop is finished
- fix reversed condition for subpage writers locking
- fix warning on page error"
* tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fallback to blocking mode when doing async dio over multiple extents
btrfs: add missing run of delayed items after unlink during log replay
btrfs: qgroup: fix deadlock between rescan worker and remove qgroup
btrfs: fix relocation crash due to premature return from btrfs_commit_transaction()
btrfs: do not start relocation until in progress drops are done
btrfs: tree-checker: use u64 for item data end to avoid overflow
btrfs: do not WARN_ON() if we have PageError set
btrfs: fix lost prealloc extents beyond eof after full fsync
btrfs: subpage: fix a wrong check on subpage->writers
* Tweaks to the paravirtualization code, to avoid using them
when they're pointless or harmful
x86 host:
* Fix for SRCU lockdep splat
* Brown paper bag fix for the propagation of errno
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIkkdsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP15Qf7B8BXNMlNkret5WN/4pGf06gNdIY6
ZqC8t/Lx1+fCkzGk+VtAw0bxRscOF4z1XzvfywO5ZI5bxQB/b2xTyBkVY90SqhsB
shug5QpikejpmvVZJXxwD3+loCUah2T6FUT6QJa0sKVhW+XiqOva8fAmYLG5agaa
VGvqFXTXiVmbiw/O9ZI/CfUC0WNrn+I1iDO+oGWyhv/22tePxGCizVczRFJn6DAD
Vh5P6AfOqXjmzdpUeOiU544FQZPHAZehb7/xYc0T9GSW4fPnTmHwRzwhUqgJnx7d
3E+eWGwny+Q/OrpKf7SbxtB65yn7lHRmdN/YtCHygl4sjs6CdjSPY8/9jQ==
=PPz1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 guest:
- Tweaks to the paravirtualization code, to avoid using them when
they're pointless or harmful
x86 host:
- Fix for SRCU lockdep splat
- Brown paper bag fix for the propagation of errno"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run
KVM: x86/mmu: Passing up the error state of mmu_alloc_shadow_roots()
KVM: x86: Yield to IPI target vCPU only if it is busy
x86/kvmclock: Fix Hyper-V Isolated VM's boot issue when vCPUs > 64
x86/kvm: Don't waste memory if kvmclock is disabled
x86/kvm: Don't use PV TLB/yield when mwait is advertised
