Introduce the marco definitions and access helper function for
AMD P-State sysfs interfaces such as each performance goals and frequency
levels in amd helper file. They will be used to read the sysfs attribute
from AMD P-State cpufreq driver for cpupower utilities.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kernel ACPI subsytem introduced the sysfs attributes for acpi cppc
library in below path:
/sys/devices/system/cpu/cpuX/acpi_cppc/
And these attributes will be used for AMD P-State driver to provide some
performance and frequency values.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Expose the helper into cpufreq header, then cpufreq driver can use this
function to get the sysfs value if it has any specific sysfs interfaces.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If kernel starts the AMD P-State module, the cpupower will initial the
capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State
capability is set, it won't need to set legacy ACPI relative
capabilities anymore.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The processor with AMD P-State function also supports legacy ACPI
hardware P-States feature as well. Once driver sets AMD P-State eanbled,
the processor will respond the finer grain AMD P-State feature instead of
legacy ACPI P-States. So it introduces the cpupower_amd_pstate_enabled()
to check whether the current kernel enables AMD P-State or AMD CPUFreq
module.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add AMD P-State capability flag in cpupower to indicate AMD new P-State
kernel module support on Ryzen processors.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
All other skbs allocated for TCP tx are using MAX_TCP_HEADER already.
MAX_HEADER can be too small for some cases (like eBPF based encapsulation),
so this can avoid extra pskb_expand_head() in lower stacks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220222031115.4005060-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If client is unable to initiate a failover reset via H_VIOCTL hcall, then
it should schedule a failover reset as a last resort. Otherwise, there is
no need to do a last resort.
Fixes: 334c424147 ("ibmvnic: improve failover sysfs entry")
Reported-by: Cris Forno <cforno12@outlook.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220221210545.115283-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add option to shift the clock by a specified number of nanoseconds.
The new argument -n will specify the number of nanoseconds to add to the
ptp clock. Since the API doesn't support negative shifts those needs to
be calculated by subtracting full seconds and adding a nanosecond offset.
Signed-off-by: Maciek Machnikowski <maciek@machnikowski.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220221200637.125595-1-maciek@machnikowski.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a bridged port is not offloaded to the hardware - either because the
underlying driver does not implement the port_bridge_{join,leave} ops,
or because the operation failed - then its dp->bridge pointer will be
NULL when dsa_port_bridge_leave() is called. Avoid dereferncing NULL.
This fixes the following splat when removing a port from a bridge:
Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP
CPU: 3 PID: 1119 Comm: brctl Tainted: G O 5.17.0-rc4-rt4 #1
Call trace:
dsa_port_bridge_leave+0x8c/0x1e4
dsa_slave_changeupper+0x40/0x170
dsa_slave_netdevice_event+0x494/0x4d4
notifier_call_chain+0x80/0xe0
raw_notifier_call_chain+0x1c/0x24
call_netdevice_notifiers_info+0x5c/0xac
__netdev_upper_dev_unlink+0xa4/0x200
netdev_upper_dev_unlink+0x38/0x60
del_nbp+0x1b0/0x300
br_del_if+0x38/0x114
add_del_if+0x60/0xa0
br_ioctl_stub+0x128/0x2dc
br_ioctl_call+0x68/0xb0
dev_ifsioc+0x390/0x554
dev_ioctl+0x128/0x400
sock_do_ioctl+0xb4/0xf4
sock_ioctl+0x12c/0x4e0
__arm64_sys_ioctl+0xa8/0xf0
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x28/0x84
el0_svc+0x1c/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x17c/0x180
Code: f9402f00 f0002261 f9401302 913cc021 (a9401404)
---[ end trace 0000000000000000 ]---
Fixes: d3eed0e57d ("net: dsa: keep the bridge_dev and bridge_num as part of the same structure")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220221203539.310690-1-alvin@pqrs.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean reports that probing on DSA drivers that aren't yet
populating supported_interfaces now fails. Fix this by allowing
phylink to detect whether DSA actually provides an underlying
mac_select_pcs() implementation.
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Fixes: bde018222c ("net: dsa: add support for phylink mac_select_pcs()")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1nMCD6-00A0wC-FG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HPT371 chip physically has only one channel, the secondary one,
however the primary channel registers do exist! Thus we have to
manually disable the non-existing channel if the BIOS hasn't done this
already. Similarly to the pata_hpt3x2n driver, always disable the
primary channel.
Fixes: 669a5db411 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Whenever one of these functions pull all data from an skb in a frag_list,
use consume_skb() instead of kfree_skb() to avoid polluting drop
monitoring.
Fixes: 6fa01ccd88 ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220220154052.1308469-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The option `--to-ctf` is only available when perf has libbabeltrace
support. Hence, on error, we shouldn't state that user must include
`--to-ctf` unless it's supported.
The only user-visible change for this commit is that when `perf` is not
configured to support libbabeltrace, the user is only prompted to
provide the `--to-json` option instead of bothe `--to-json` and
`--to-ctf`.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220220113952.138280-1-ma.mandourr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In SPE traces the 'weight' field can't be printed in 'perf script'
because the 'dummy:u' event doesn't have the WEIGHT attribute set.
Use evsel__do_check_stype(..) to check this field, as it's done with
other fields such as "phys_addr".
Before:
$ perf record -e arm_spe_0// -- sleep 1
$ perf script -F event,ip,weight
Samples for 'dummy:u' event do not have WEIGHT attribute set. Cannot print 'weight' field.
After:
$ perf script -F event,ip,weight
l1d-access: 12 ffffaf629d4cb320
tlb-access: 12 ffffaf629d4cb320
memory: 12 ffffaf629d4cb320
Fixes: b0fde9c6e2 ("perf arm-spe: Add SPE total latency as PERF_SAMPLE_WEIGHT")
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220221171707.62960-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add proper return codes for all cases of data directory creation failure
and add error message output based on these codes.
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220222091417.11020-1-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull cgroup fixes from Tejun Heo:
- Fix for a subtle bug in the recent release_agent permission check
update
- Fix for a long-standing race condition between cpuset and cpu hotplug
- Comment updates
* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: Fix kernel-doc
cgroup-v1: Correct privileges check in release_agent writes
cgroup: clarify cgroup_css_set_fork()
cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
Alexandra Winter says:
====================
s390/net: updates 2022-02-21
Just cleanup. No functional changes, as currently virt=phys in s390.
====================
Link: https://lore.kernel.org/r/20220221145633.3869621-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented string "evm=fix" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 evm=fix", will be passed to user space.
and that string is added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
evm=fix
With this change, using "evm=fix" acts as expected and an invalid
option ("evm=evm") causes a warning to be printed:
evm: invalid "evm" mode
but init's environment is not polluted with this string, as expected.
Fixes: 7102ebcd65 ("evm: permit only valid security.evm xattrs to be updated")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
mutex_is_locked() tests whether the mutex is locked *by any task*, while
here we want to test if it is held *by the current task*. To avoid
false/missed WARNINGs, use lockdep_assert_is_held() and
lockdep_assert_is_not_held() instead, which do the right thing (though
they are a no-op if CONFIG_LOCKDEP=n).
Cc: stable@vger.kernel.org
Fixes: 2554a48f44 ("selinux: measure state and policy capabilities")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
arch_hugetlb_valid_size() can be just factored out to create another helper
to be used in arch_hugetlb_migration_supported() as well. This just defines
__hugetlb_valid_size() for that purpose.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1645073557-6150-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Emails to Roger Quadros TI account bounce with:
550 Invalid recipient <rogerq@ti.com> (#5.1.1)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220221100701.48593-1-krzysztof.kozlowski@canonical.com
There are few bindings with compatibles starting with a "synopsys"
prefix. Document it as deprecated, to be sure no new usages will
appear.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220221082228.34407-2-krzysztof.kozlowski@canonical.com
There are few boards DTS using "hisi,rst-syscon" property -
undocumented "hisi" prefix. The property will not be changed in DTS to
non-deprecated one, because of compatibility reasons. Add deprecated
"hisi" prefix to silence DT schema warnings.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: David Heidelberg <david@ixit.cz>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220221082228.34407-1-krzysztof.kozlowski@canonical.com
On some microarchitectures, clearing PSTATE.TCO is expensive. Clearing
TCO is only necessary if in-kernel MTE is enabled, or if MTE is
enabled in the userspace process in synchronous (or, soon, asymmetric)
mode, because we do not report uaccess faults to userspace in none
or asynchronous modes. Therefore, adjust the kernel entry code to
clear TCO only if necessary.
Because it is now possible to switch to a task in which TCO needs to
be clear from a task in which TCO is set, we also need to do the same
thing on task switch.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I52d82a580bd0500d420be501af2c35fa8c90729e
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220219012945.894950-2-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
In an upcoming commit we are going to need to call
kasan_hw_tags_enabled() from arch/arm64/include/asm/mte.h. This
would create a circular dependency between headers if KASAN_GENERIC
or KASAN_SW_TAGS is enabled: linux/kasan.h -> linux/pgtable.h ->
asm/pgtable.h -> asm/mte.h -> linux/kasan.h. Break the cycle
by introducing a new header linux/kasan-enabled.h with the
kasan_*enabled() functions that can be included from asm/mte.h.
Link: https://linux-review.googlesource.com/id/I5b0d96c6ed0026fc790899e14d42b2fac6ab568e
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220219012945.894950-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
It is a preparation patch for eBPF atomic supports under arm64. eBPF
needs support atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and
atomic[64]_{xchg|cmpxchg}. The ordering semantics of eBPF atomics are
the same with the implementations in linux kernel.
Add three helpers to support LDCLR/LDEOR/LDSET/SWP, CAS and DMB
instructions. STADD/STCLR/STEOR/STSET are simply encoded as aliases for
LDADD/LDCLR/LDEOR/LDSET with XZR as the destination register, so no extra
helper is added. atomic_fetch_add() and other atomic ops needs support for
STLXR instruction, so extend enum aarch64_insn_ldst_type to do that.
LDADD/LDEOR/LDSET/SWP and CAS instructions are only available when LSE
atomics is enabled, so just return AARCH64_BREAK_FAULT directly in
these newly-added helpers if CONFIG_ARM64_LSE_ATOMICS is disabled.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220217072232.1186625-3-houtao1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
If CONFIG_ARM64_LSE_ATOMICS is off, encoders for LSE-related instructions
can return AARCH64_BREAK_FAULT directly in insn.h. In order to access
AARCH64_BREAK_FAULT in insn.h, we can not include debug-monitors.h in
insn.h, because debug-monitors.h has already depends on insn.h, so just
move AARCH64_BREAK_FAULT into insn-def.h.
It will be used by the following patch to eliminate unnecessary LSE-related
encoders when CONFIG_ARM64_LSE_ATOMICS is off.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220217072232.1186625-2-houtao1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Not strickly needed but checking CONFIG_VMAP_STACK instead of
task_stack_vm_area()' result allows the compiler the remove the else
path in the CONFIG_VMAP_STACK case where the pointer can't be NULL.
Check for CONFIG_VMAP_STACK in order to use the proper path.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220217102406.3697941-9-bigeasy@linutronix.de
The task stack could be deallocated later, but for fork()/exec() kind of
workloads (say a shell script executing several commands) it is important
that the stack is released in finish_task_switch() so that in VMAP_STACK
case it can be cached and reused in the new task.
For PREEMPT_RT it would be good if the wake-up in vfree_atomic() could
be avoided in the scheduling path. Far worse are the other
free_thread_stack() implementations which invoke __free_pages()/
kmem_cache_free() with disabled preemption.
Cache the stack in free_thread_stack() in the VMAP_STACK case and
RCU-delay the free path otherwise. Free the stack in the RCU callback.
In the VMAP_STACK case this is another opportunity to fill the cache.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220217102406.3697941-8-bigeasy@linutronix.de
There is no need to perform the stack accounting of the outgoing task in
its final schedule() invocation which happens with preemption disabled.
The task is leaving, the resources will be freed and the accounting can
happen in do_exit() before the actual schedule invocation which
frees the stack memory.
Move the accounting of the stack memory from release_task_stack() to
exit_task_stack_account() which then can be invoked from do_exit().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220217102406.3697941-7-bigeasy@linutronix.de
memcg_charge_kernel_stack() is only used in the CONFIG_VMAP_STACK case.
Move memcg_charge_kernel_stack() into the CONFIG_VMAP_STACK block and
invoke it from within alloc_thread_stack_node().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220217102406.3697941-6-bigeasy@linutronix.de
All four versions of alloc_thread_stack_node() assign now
task_struct::stack in case the allocation was successful.
Let alloc_thread_stack_node() return an error code instead of the stack
pointer and remove the stack assignment in dup_task_struct().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220217102406.3697941-5-bigeasy@linutronix.de
Provide a generic alloc_thread_stack_node() for IA64 and
CONFIG_ARCH_THREAD_STACK_ALLOCATOR which returns stack pointer and sets
task_struct::stack so it behaves exactly like the other implementations.
Rename IA64's alloc_thread_stack_node() and add the generic version to the
fork code so it is in one place _and_ to drastically lower the chances of
fat fingering the IA64 code. Do the same for free_thread_stack().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220217102406.3697941-4-bigeasy@linutronix.de
alloc_thread_stack_node() already populates the task_struct::stack
member except on IA64. The stack pointer is saved and populated again
because IA64 needs it and arch_dup_task_struct() overwrites it.
Allocate thread's stack after task_struct has been duplicated as a
preparation for further changes.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220217102406.3697941-3-bigeasy@linutronix.de
The use of ifdef CONFIG_VMAP_STACK is confusing in terms what is
actually happenning and what can happen.
For instance from reading free_thread_stack() it appears that in the
CONFIG_VMAP_STACK case it may receive a non-NULL vm pointer but it may also
be NULL in which case __free_pages() is used to free the stack. This is
however not the case because in the VMAP case a non-NULL pointer is always
returned here. Since it looks like this might happen, the compiler creates
the correct dead code with the invocation to __free_pages() and everything
around it. Twice.
Add spaces between the ifdef and the identifer to recognize the ifdef
level which is currently in scope.
Add the current identifer as a comment behind #else and #endif.
Move the code within free_thread_stack() and alloc_thread_stack_node()
into the relevant ifdef blocks.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220217102406.3697941-2-bigeasy@linutronix.de
Emails to Yash Shah bounce with "The email account that you tried to
reach does not exist.", so drop him from all maintainer entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220214082349.162973-1-krzysztof.kozlowski@canonical.com
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then the
current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition. For reset-related
functionalities, vfio driver uses PCI reset API's. These
API's internally change the PCI power state back to D0 first if
the device power state is non-D0. This state change to D0 will happen
without the involvement of vfio driver.
Let's consider the following example:
1. The device is in D3hot.
2. User invokes VFIO_DEVICE_RESET ioctl.
3. pci_try_reset_function() will be called which internally
invokes pci_dev_save_and_disable().
4. pci_set_power_state(dev, PCI_D0) will be called first.
5. pci_save_state() will happen then.
Now, for the devices which has NoSoftRst-, the pci_set_power_state()
can trigger soft reset and the original PCI config state will be lost
at step (4) and this state cannot be restored again. This original PCI
state can include any setting which is performed by SBIOS or host
linux kernel (for example LTR, ASPM L1 substates, etc.). When this
soft reset will be triggered, then all these settings will be reset,
and the device state saved at step (5) will also have this setting
cleared so it cannot be restored. Since the vfio driver only exposes
limited PCI capabilities to its user, so the vfio driver user also
won't have the option to save and restore these capabilities state
either and these original settings will be permanently lost.
For pci_reset_bus() also, we can have the above situation.
The other functions/devices can be in D3hot and the reset will change
the power state of all devices to D0 without the involvement of vfio
driver.
So, before calling any reset-related API's, we need to make sure that
the device state is D0. This is mainly to preserve the state around
soft reset.
For vfio_pci_core_disable(), we use __pci_reset_function_locked()
which internally can use pci_pm_reset() for the function reset.
pci_pm_reset() requires the device power state to be in D0, otherwise
it returns error.
This patch changes the device power state to D0 by invoking
vfio_pci_set_power_state() explicitly before calling any reset related
API's.
Fixes: 51ef3a004b ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220217122107.22434-3-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then
the current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition.
For saving the PCI state locally, pci_store_saved_state() is being
used and the pci_load_and_free_saved_state() will free the allocated
memory.
But for reset related IOCTLs, vfio driver calls PCI reset-related
API's which will internally change the PCI power state back to D0. So,
when the guest resumes, then it will get the current state as D0 and it
will skip the call to vfio_pci_set_power_state() for changing the
power state to D0 explicitly. In this case, the memory pointed by
'pm_save' will never be freed. In a malicious sequence, the state changing
to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be
run in a loop and it can cause an OOM situation.
This patch frees the earlier allocated memory first before overwriting
'pm_save' to prevent the mentioned memory leak.
Fixes: 51ef3a004b ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220217122107.22434-2-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When perf_data__create_dir() fails, it calls close_dir(), but
perf_session__delete() also calls close_dir() and since dir.version and
dir.nr were initialized by perf_data__create_dir(), a double free occurs.
This patch moves the initialization of dir.version and dir.nr after
successful initialization of dir.files, that prevents double freeing.
This behavior is already implemented in perf_data__open_dir().
Fixes: 1455206311 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215202601.22943-1-manasi.d.navare@intel.com
So we can tell which output goes to which device when multiple GPUs
are present. Also while we are here, convert DRM_ERROR to dev_info.
The error cases are not critical.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
