Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb8 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb8 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add __GFP_ZERO flag for alloc_page in function bio_copy_kern to initialize
the buffer of a bio.
Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220216084038.15635-1-tcs.kernel@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The declaration
EXPORT_SYMBOL(dcdbas_smi_request);
was placed after smi_request_store(), which made a false impression that
dcdbas_smi_request() was not exported.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/20220212125908.357588-1-mat.jonczyk@o2.pl
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If vcpu has tsc_always_catchup set each request updates pvclock data.
KVM_HC_CLOCK_PAIRING consumers such as ptp_kvm_x86 rely on tsc read on
host's side and do hypercall inside pvclock_read_retry loop leading to
infinite loop in such situation.
v3:
Removed warn
Changed return code to KVM_EFAULT
v2:
Added warn
Signed-off-by: Anton Romanov <romanton@google.com>
Message-Id: <20220216182653.506850-1-romanton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I saw the below splatting after the host suspended and resumed.
WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4
RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
Call Trace:
<TASK>
syscore_resume+0x90/0x340
suspend_devices_and_enter+0xaee/0xe90
pm_suspend.cold+0x36b/0x3c2
state_store+0x82/0xf0
kernfs_fop_write_iter+0x1b6/0x260
new_sync_write+0x258/0x370
vfs_write+0x33f/0x510
ksys_write+0xc9/0x160
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Follow the precedent set by other architectures that support the VCPU
ioctl, KVM_ENABLE_CAP, and advertise the VM extension, KVM_CAP_ENABLE_CAP.
This way, userspace can ensure that KVM_ENABLE_CAP is available on a
vcpu before using it.
Fixes: 5c919412fe ("kvm/x86: Hyper-V synthetic interrupt controller")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220214212950.1776943-1-aaronlewis@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990
0x1071 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to properly emulate the WFI instruction, KVM reads back
ICH_VMCR_EL2 and enables doorbells for GICv4. These preparations are
necessary in order to recognize pending interrupts in
kvm_arch_vcpu_runnable() and return to the guest. Until recently, this
work was done by kvm_arch_vcpu_{blocking,unblocking}(). Since commit
6109c5a6ab ("KVM: arm64: Move vGIC v4 handling for WFI out arch
callback hook"), these callbacks were gutted and superseded by
kvm_vcpu_wfi().
It is important to note that KVM implements PSCI CPU_SUSPEND calls as
a WFI within the guest. However, the implementation calls directly into
kvm_vcpu_halt(), which skips the needed work done in kvm_vcpu_wfi()
to detect pending interrupts. Fix the issue by calling the WFI helper.
Fixes: 6109c5a6ab ("KVM: arm64: Move vGIC v4 handling for WFI out arch callback hook")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220217101242.3013716-1-oupton@google.com
Jakub Kicinski says:
====================
net: ping6: support setting basic SOL_IPV6 options via cmsg
Support for IPV6_HOPLIMIT, IPV6_TCLASS, IPV6_DONTFRAG on ICMPv6
sockets and associated tests. I have no immediate plans to
implement IPV6_FLOWINFO and all the extension header stuff.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a basic test to make sure ping sockets don't crash
with IPV6_2292* options.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_HOPLIMIT via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case HOPLIMIT ICMP cmsg - packet data returned 1, expected 0
Case HOPLIMIT ICMP diff - packet data returned 1, expected 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_TCLASS via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case TCLASS ICMP cmsg - packet data returned 1, expected 0
Case TCLASS ICMP cmsg - rejection returned 0, expected 1
Case TCLASS ICMP diff - pass returned 1, expected 0
Case TCLASS ICMP diff - packet data returned 1, expected 0
Case TCLASS ICMP diff - rejection returned 0, expected 1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_DONTFRAG via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case DONTFRAG ICMP setsock returned 0, expected 1
Case DONTFRAG ICMP cmsg returned 0, expected 1
Case DONTFRAG ICMP both returned 0, expected 1
Case DONTFRAG ICMP diff returned 0, expected 1
FAIL - 4/24 cases failed
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support setting IPV6_HOPLIMIT, IPV6_TCLASS, IPV6_DONTFRAG
during sendmsg via SOL_IPV6 cmsgs.
tclass and dontfrag are init'ed from struct ipv6_pinfo in
ipcm6_init_sk(), while hlimit is inited to -1, so we need
to handle it being populated via cmsg explicitly.
Leave extension headers and flowlabel unimplemented.
Those are slightly more laborious to test and users
seem to primarily care about IPV6_TCLASS.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add clocks, power-domain and memory bindings to support APE subsystem
on Tegra234.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Vladimir Oltean says:
====================
kRemove BRENTRY checks from switchdev drivers
As discussed here:
https://patchwork.kernel.org/project/netdevbpf/patch/20220214233111.1586715-2-vladimir.oltean@nxp.com/#24738869
no switchdev driver makes use of VLAN port objects that lack the
BRIDGE_VLAN_INFO_BRENTRY flag. Notifying them in the first place rather
seems like an omission of commit 9c86ce2c1a ("net: bridge: Notify
about bridge VLANs").
Since commit 3116ad0696 ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag") that was just merged, the bridge no
longer notifies switchdev upon creation of these VLANs, so we can remove
the checks from drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 3116ad0696 ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 3116ad0696 ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 3116ad0696 ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 3116ad0696 ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 3116ad0696 ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Support PTP over UDP with the ocelot-8021q DSA tagging protocol
The alternative tag_8021q-based tagger for Ocelot switches, added here:
https://patchwork.kernel.org/project/netdevbpf/cover/20210129010009.3959398-1-olteanv@gmail.com/
gained support for PTP over L2 here:
https://patchwork.kernel.org/project/netdevbpf/cover/20210213223801.1334216-1-olteanv@gmail.com/
mostly as a minimum viable requirement. That PTP support was mostly
self-contained code that installed some rules to replicate PTP packets
on the CPU queue, in felix_setup_mmio_filtering().
However ocelot-8021q starts to look more interesting for general purpose
usage, so it is now time to reduce the technical debt by integrating the
PTP traps used by Felix for tag_8021q with the rest of the Ocelot driver.
There is further consolidation of traps to be done. The cookies used by
MRP traps overlap with the cookies used for tag_8021q PTP traps, so
those features could not be used at the same time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA inherits NETIF_F_CSUM_MASK from master->vlan_features, and the
expectation is that TX checksumming is offloaded and not done in
software.
Normally the DSA master takes care of this, but packets handled by
ocelot_defer_xmit() are a very special exception, because they are
actually injected into the switch through register-based MMIO. So the
DSA master is not involved at all for these packets => no one calculates
the checksum.
This allows PTP over UDP to work using the ocelot-8021q tagging
protocol.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically, the felix DSA driver has installed special traps such that
PTP over L2 works with the ocelot-8021q tagging protocol; commit
0a6f17c6ae ("net: dsa: tag_ocelot_8021q: add support for PTP
timestamping") has the details.
Then the ocelot switch library also gained more comprehensive support
for PTP traps through commit 96ca08c058 ("net: mscc: ocelot: set up
traps for PTP packets").
Right now, PTP over L2 works using ocelot-8021q via the traps it has set
for itself, but nothing else does. Consolidating the two code blocks
would make ocelot-8021q gain support for PTP over L4 and tc-flower
traps, and at the same time avoid some code and TCAM duplication.
The traps are similar in intent, but different in execution, so some
explanation is required. The traps set up by felix_setup_mmio_filtering()
are VCAP IS1 filters, which have a PAG that chains them to a VCAP IS2
filter, and the IS2 is where the 'trap' action resides. The traps set up
by ocelot_trap_add(), on the other hand, have a single filter, in VCAP
IS2. The reason for chaining VCAP IS1 and IS2 in Felix was to ensure
that the hardcoded traps take precedence and cannot be overridden by the
Ocelot switch library.
So in principle, the PTP traps needed for ocelot-8021q in the Felix
driver can rely on ocelot_trap_add(), but the filters need to be patched
to account for a quirk that LS1028A has: the quirk_no_xtr_irq described
in commit 0a6f17c6ae ("net: dsa: tag_ocelot_8021q: add support for PTP
timestamping"). Live-patching is done by iterating through the trap list
every time we know it has been updated, and transforming a trap into a
redirect + CPU copy if ocelot-8021q is in use.
Making the DSA ocelot-8021q tagger work with the Ocelot traps means we
can eliminate the dedicated OCELOT_VCAP_IS1_TAG_8021Q_PTP_MMIO and
OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO cookies. To minimize the patch delta,
OCELOT_VCAP_IS2_MRP_TRAP takes the place of OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO
(the alternative would have been to left-shift all cookie numbers by 1).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There has been some controversy related to the sanity check that a CPU
port exists, and commit e8b1d76980 ("net: dsa: felix: Fix memory leak
in felix_setup_mmio_filtering") even "corrected" an apparent memory leak
as static analysis tools see it.
However, the check is completely dead code, since the earliest point at
which felix_setup_mmio_filtering() can be called is:
felix_pci_probe
-> dsa_register_switch
-> dsa_switch_probe
-> dsa_tree_setup
-> dsa_tree_setup_cpu_ports
-> dsa_tree_setup_default_cpu
-> contains the "DSA: tree %d has no CPU port\n" check
-> dsa_tree_setup_master
-> dsa_master_setup
-> sysfs_create_group(&dev->dev.kobj, &dsa_group);
-> makes tagging_store() callable
-> dsa_tree_change_tag_proto
-> dsa_tree_notify
-> dsa_switch_event
-> dsa_switch_change_tag_proto
-> ds->ops->change_tag_protocol
-> felix_change_tag_protocol
-> felix_set_tag_protocol
-> felix_setup_tag_8021q
-> felix_setup_mmio_filtering
-> breaks at first CPU port
So probing would have failed earlier if there wasn't any CPU port
defined.
To avoid all confusion, delete the dead code and replace it with a
comment.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ocelot switch library does not need this information, but the felix
DSA driver does.
As a reminder, the VSC9959 switch in LS1028A doesn't have an IRQ line
for packet extraction, so to be notified that a PTP packet needs to be
dequeued, it receives that packet also over Ethernet, by setting up a
packet trap. The Felix driver needs to install special kinds of traps
for packets in need of RX timestamps, such that the packets are
replicated both over Ethernet and over the CPU port module.
But the Ocelot switch library sets up more than one trap for PTP event
messages; it also traps PTP general messages, MRP control messages etc.
Those packets don't need PTP timestamps, so there's no reason for the
Felix driver to send them to the CPU port module.
By knowing which traps need PTP timestamps, the Felix driver can
adjust the traps installed using ocelot_trap_add() such that only those
will actually get delivered to the CPU port module.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using the ocelot-8021q tagging protocol, the CPU port isn't
configured as an NPI port, but is a regular port. So a "trap to CPU"
operation is actually a "redirect" operation. So DSA needs to set up the
trapping action one way or another, depending on the tagging protocol in
use.
To ease DSA's work of modifying the action, keep all currently installed
traps in a list, so that DSA can live-patch them when the tagging
protocol changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the helpers that avoid the quadratic complexity associated with
calling dsa_to_port() indirectly: dsa_is_unused_port(),
dsa_is_cpu_port().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
OCELOT_VCAP_IS2_TAG_8021Q_TXVLAN overlaps with OCELOT_VCAP_IS2_MRP_REDIRECT.
To avoid this, make OCELOT_VCAP_IS2_MRP_REDIRECT take the cookie region
from N to 2 * N - 1 (where N is ocelot->num_phys_ports).
To avoid any risk that the singleton (not per port) VCAP IS2 filters
overlap with per-port VCAP IS2 filters, we must ensure that the number
of singleton filters is smaller than the number of physical ports.
This is true right now, but may change in the future as switches with
less ports get supported, or more singleton filters get added. So to be
future-proof, let's move the singleton filters at the end of the range,
where they won't overlap with anything to their right.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MRP assist code installs a VCAP IS2 trapping rule for each port, but
since the key and the action is the same, just the ingress port mask
differs, there isn't any need to do this. We can save some space in the
TCAM by using a single filter and adjusting the ingress port mask.
Reuse the ocelot_trap_add() and ocelot_trap_del() functions for this
purpose.
Now that the cookies are no longer per port, we need to change the
allocation scheme such that MRP traps use a fixed number.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MRP frames are configured to be trapped to the CPU queue 7, and this
number is reflected in the extraction header. However, the information
isn't used anywhere, so just leave MRP frames to go to CPU queue 0
unless needed otherwise.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Every use case that needed VCAP filters (in order: DSA tag_8021q, MRP,
PTP traps) has hardcoded filter identifiers that worked well enough for
that use case alone. But when two or more of those use cases would be
used together, some of those identifiers would overlap, leading to
breakage.
Add definitions for each cookie and centralize them in ocelot_vcap.h,
such that the overlaps are more obvious.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver uses an identifier equal to (ocelot->num_phys_ports + port)
for MRP traps installed when the system is in the role of an MRC, and an
identifier equal to (port) otherwise.
Use the same identifier in both cases as a consolidation for the various
cookie values spread throughout the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 817b8b9c53 ("HID: elo: fix memory leak in elo_probe") introduced
memory leak on error path, but more importantly the whole USB reference
counting is not needed at all in the first place, as the driver itself
doesn't change the reference counting in any way, and the associated
usb_device is guaranteed to be kept around by USB core as long as the
driver binding exists.
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: fbf42729d0 ("HID: elo: update the reference count of the usb device structure")
Fixes: 817b8b9c53 ("HID: elo: fix memory leak in elo_probe")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Spill to DRAM functionality is a feature that allows STB (Smart Trace
Buffer) to spill data from SRAM into DRAM on some future AMD ASICs. The
size allocated for STB is more than the earlier SoC's which helps to
collect more tracing and telemetry data.
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220204122527.3873552-1-Sanket.Goswami@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Since hid-apple driver now makes use of LEDS functionality, reflect this
properly in Kconfig.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9018eacbe6 ("HID: apple: Add support for keyboard backlight on certain T2 Macs.")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Split the current driver in two parts:
- Common part: All the commom function other than enumeration function.
- Enumeration/HW specific part: The current enumeration using CPU model
is left in the old module. This uses service of common driver to register
sysfs objects. Also provide callbacks for MSR access related to uncore.
- Add MODULE_DEVICE_TABLE to uncore-frequency.c
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-5-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a new sysfs attribute "current_freq_khz" to display current uncore
frequency. This value is read from MSR 0x621.
Root user permission is required to read uncore current frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use of sysfs API is always preferable over using kobject calls to create
attributes. Remove usage of kobject_init_and_add() and use
sysfs_create_group(). To create relationship between sysfs attribute
and uncore instance use device_attribute*, which is defined per
uncore instance.
To create uniform locking for both read and write attributes take
lock in the sysfs callbacks, not in the actual functions where
the MSRs are read or updated.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move the current driver from platform/x86/intel/uncore-frequency.c
to platform/x86/intel/uncore-frequency/uncore-frequency.c.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Sparse (rightly) currently gives the following warning:
drivers/leds/simple/simatic-ipc-leds.c:155:40:
sparse: sparse: incorrect type in assignment (different address spaces)
expected void *static [toplevel] simatic_ipc_led_memory
got void [noderef] __iomem *
Fix this by changing the type of simatic_ipc_led_memory to void __iomem *
and use readl()/writel() to access it.
Cc: Henning Schild <henning.schild@siemens.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Gerd Haeussler <gerd.haeussler.ext@siemens.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
simatic_ipc_led_mem_res is not used outside of the driver, make it static.
Cc: Henning Schild <henning.schild@siemens.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Misc updates for mlx5:
1) Alex Liu Adds support for using xdp->data_meta
2) Aya Levin Adds PTP counters and port time stamp mode for representors and
switchdev mode.
3) Tariq Toukan, Striding RQ simple improvements.
4) Roi Dayan (7): Create multiple attr instances per flow
Some TC actions use post actions for their implementation.
For example CT and sample actions.
Create a new flow attr instance after each multi table action and
create a post action rule for it as a generic parsing step.
Now multi table actions like CT, sample don't require to do it.
When flow has multiple attr instances, the first flow attr is being
offloaded normally and linked to the next attr (post action rule) by
setting an id on reg_c for matching.
Post action rule (rule created from second attr instance) match the
id on reg_c and does rest of the actions.
Example rule with actions CT,goto will be created with 2 attr instances
as following: attr1(CT)->attr2(goto)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmIN/2UACgkQSD+KveBX
+j4hAwgAvfDAdixlR39Hd8ONWscAb8rSuWqCcEj3/lN8oZ0+jtuuQUCt0wBuMI87
V63Adz5tkbvBKEmBTycOqvCrrbfWlCz5a2Uia1HanMuggJ5zea6XupsTKCm20sXc
YE6xSA7lkmrkL0tZiMW2ROiWH/qLq/pMzXga5/4IPPisaTJeJf2AauoANiBu4+Cz
GWkcgJhtl5he748sHL/O99jYXp+aLNiyebrThCf6wC2bpj2zzlC5ckoy0F0ZWPuM
Fki6SP7/H1PE0IO4vBdehHXMLoez7vNj0ddFmTNrjUgr/FhgO+egMFJQCr52rzvP
7tdWI0LvWzxoYHxI0oe8Yms0t5EcBw==
=Et8+
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2022-02-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-02-16
Misc updates for mlx5:
1) Alex Liu Adds support for using xdp->data_meta
2) Aya Levin Adds PTP counters and port time stamp mode for representors and
switchdev mode.
3) Tariq Toukan, Striding RQ simple improvements.
4) Roi Dayan (7): Create multiple attr instances per flow
Some TC actions use post actions for their implementation.
For example CT and sample actions.
Create a new flow attr instance after each multi table action and
create a post action rule for it as a generic parsing step.
Now multi table actions like CT, sample don't require to do it.
When flow has multiple attr instances, the first flow attr is being
offloaded normally and linked to the next attr (post action rule) by
setting an id on reg_c for matching.
Post action rule (rule created from second attr instance) match the
id on reg_c and does rest of the actions.
Example rule with actions CT,goto will be created with 2 attr instances
as following: attr1(CT)->attr2(goto)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes: 04f9bf2bac ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replace the driver-specific definitions of MIPI CSI-2 data types with
macros from mipi-csi2.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
