The SocFPGA machine since commit b3ca9888f3 ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly. Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:
/usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f3 ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The stm32mp15xxaa-pinctrl.dtsi included in stm32mp15xx-dhcom-som.dtsi
already sets status = "okay" in gpioc: gpio@50004000 node, drop the
duplicate from stm32mp15xx-dhcom-som.dtsi . No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This patch presents the DT patches for the emtrion GmbH
Argon board series. They are available with STM32MP157
from STMicroelectronics with 512 MByte Memory.
The devicetree stm32mp157c-emstamp-argon.dtsi is the common part
providing the module components and the basic support for the SoC.
The support for the emSBC-Argon baseboard in the developer-kit
configuration is provided by the stm32mp157c-emsbc-argon.dts file.
Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This patch presents the yaml patch for the emtrion GmbH
Argon board series.
Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The "allwinner,sun8i-h3-ths" thermal sensor has 0 argument cells, but
the consumer has an argument cell. It is ignored by the code, but the
error was found with some upcoming schema validation changes. The schema
and code both agree that 0 cells is correct.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220204002802.1214602-1-robh@kernel.org
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reintroduce the !join_mbus single pipe cases for adlp+.
Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.
This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The csi1 block node was mistakenly added before the gic node, although
its address comes after the gic's. Move the node to its correct
position.
Fixes: 90e048101f ("ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220205185429.2278860-2-paul.kocialkowski@bootlin.com
Remove the following warnings seen when building with W=1.
Warning (unique_unit_address): /soc/timer@40000c00: duplicate unit-address
(also used in node /soc/timers@40000c00)
This approach is based on some discussions[1], to restructure the dtsi
and dts files.
Timer5 is enabled by default on stm32f4 series, to act as clockevent. In
order to get rid of the W=1 warning, and be compliant with dt-schemas
(e.g. dtbs_check):
- In stm32f429.dtsi:
. Keep the more complete timers5 description
. Remove the most simple timer5 node that is duplicate
- In each board:
. adopt "st,stm32-timer" compatible for timers5, also add the interrupt
. use /delete-property/ and /delete-node/ so the it matches the
clockevent bindings
Note: all this is done in one shot (e.g. not split) to keep clockevent
functionality.
[1] https://lore.kernel.org/linux-arm-kernel/Yaf4jiZIp8+ndaXs@robh.at.kernel.org/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Several unused "timer" are duplicate nodes of "timers" nodes.
There are two dt-schemas:
- timer/st,stm32-timer.yaml: A timer is needed on STM32F4 series, on all
boards, to act as clockevent.
- mfd/st,stm32-timers.yaml: Timers can be used for other purpose.
By default, timer5 is left enabled to be used as clockevent. Remove all
other timer clockevent nodes that are currently unused and duplicated.
This removes several messages: Warning (unique_unit_address): /soc/timer@..
duplicate unit-address (also used in node /soc/timers@...)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Allthough kernel text is always mapped with BATs, we still have
inittext mapped with pages, so TLB miss handling is required
when CONFIG_DEBUG_PAGEALLOC or CONFIG_KFENCE is set.
The final solution should be to set a BAT that also maps inittext
but that BAT then needs to be cleared at end of init, and it will
require more changes to be able to do it properly.
As DEBUG_PAGEALLOC or KFENCE are debugging, performance is not a big
deal so let's fix it simply for now to enable easy stable application.
Fixes: 035b19a15a ("powerpc/32s: Always map kernel text and rodata with BATs")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aea33b4813a26bdb9378b5f273f00bd5d4abe240.1638857364.git.christophe.leroy@csgroup.eu
In some cases, a single SerDes instance can be shared between two different
processors, each using a separate link. In these cases, the SerDes
configuration is done in an earlier boot stage. Therefore, add support to
skip reconfiguring, if it is was already configured beforehand.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220128072642.29188-1-a-govindraju@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes for bunch of drivers:
- clk params for dphy
- arg fix for mtk-tphy
- refcount leak fix for stm32
- bus width fix for zynqmp
- sentinel fix ti
- PHY_BRCM_USB Kconfig fix
- clk fix for usb phy
-----BEGIN PGP SIGNATURE-----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=Av3W
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-5.17' into next
Merge phy fixes for 5.17 into next branch to resolve the conflict
between fixes and next for upcoming patches
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
POSIX extensions require SMB3.1.1 (so improve the error
message when vers=3.0, 2.1 or 2.0 is specified on mount)
Signed-off-by: Steve French <stfrench@microsoft.com>
It is quite pointless to use memcpy to copy two bytes, besides that
this construct will also partially remove type and size sanity checks.
Therefore simply use an assignment.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Due to historical reasons os_info handling functions misuse
the notion of physical vs virtual addresses difference.
Note: this does not fix a bug currently, since virtual
and physical addresses are identical.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Due to historical reasons sclp_sdias_copy() misuses
the notion of physical vs virtual addresses difference.
Note: this does not fix a bug currently, since virtual
and physical addresses are identical.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Due to historical reasons memcpy_absolute() and friend functions
misuse the notion of physical vs virtual addresses difference.
Note: this does not fix a bug currently, since virtual and physical
addresses are identical.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
commit 72b3942a17 ("scripts: ftrace - move the
sort-processing in ftrace_init") had the unexpected
side effect that wrong code locations were patched.
To prevent this from happening again, verify the
opcode before patching it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove my old invalid email address which can be found in a couple of
files. Instead of updating it, just remove my contact data completely
from source files.
We have git and other tools which allow to figure out who is responsible
for what with recent contact data.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch adds s390dbf logging to the function that executes the
PQAP(AQIC) instruction on behalf of the guest to which the queue for which
interrupts are being enabled or disabled is attached.
Currently, the vfio_ap_irq_enable function sets status response code 06
(notification indicator byte address (nib) invalid) in the status word
when the vfio_pin_pages function - called to pin the page containing the
nib - returns an error or a different number of pages pinned than
requested.
Setting the response code returned to userspace without also logging a
message in the kernel makes it impossible to determine whether the response
was due to an error detected by the vfio_ap device driver or because the
response code was returned by the firmware in response to the PQAP(AQIC)
instruction.
In addition to logging a warning for the situation above, this patch adds
the following:
* A function to validate the nib address invoked prior to calling the
vfio_pin_pages function. This allows for logging a message informing
the reader of the reason the page containing the nib can not be pinned
if the nib address is not valid. Response code 06 (invalid nib address)
will be set in the status word returned to the guest from the
instruction.
* Checks the return value from the kvm_s390_gisc_register and logs a
message informing the reader of the failure. Status response code 08
(invalid gisa) will be set in the status word returned to the guest from
the PQAP(AQIC) instruction.
* Checks the status response code returned from execution of the PQAP(AQIC)
instruction and if it indicates an error, logs a message informing the
reader.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch adds s390dbf logging to the function that handles interception
of the PQAP(AQIC) instruction. Several items of data are validated before
ultimately calling the functions that execute the PQAP(AQIC) instruction on
behalf of the guest to which the queue for which interrupts are being
enabled or disabled is attached.
Currently, the handle_pqap function sets status response code 01 (queue not
available) in the status word that is normally returned from the
PQAP(AQIC) instruction under the following conditions:
* Set when the function pointer to the handler is not set in the
kvm_s390_crypto object (i.e., the PQAP hook is not registered).
* Set when the KVM pointer is not set in the ap_matrix_mdev object
(i.e., the matrix mdev is not passed through to a guest).
* Set when the queue for which interrupts are being enabled or
disabled is either not bound to the vfio_ap device driver or not assigned
to the matrix mdev.
Setting the response code returned to userspace without also logging a
message in the kernel makes it impossible to determine whether the response
was due to an error detected by the vfio_ap device driver or because the
response code was returned by the firmware in response to the PQAP(AQIC)
instruction, so this patch logs a message to the s390dbf log for the
vfio_ap device driver for each of the situations described above.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Changed the MAINTAINERS file to include the new
drivers/s390/crypto/vfio_ap_debug.h file path.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Sets up an s390dbf debug log for the vfio_ap device driver for logging
events occurring during the lifetime of the driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move test_modules_return_* prototypes into a header file in order to
placate -Wmissing-prototypes.
Fixes: 90c5318795 ("s390/module: test loading modules with a lot of relocations")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Now that Alexander Gordeev has volunteered to be a co-maintainer for
s390, I can act as a reviewer instead of being a maintainer for s390.
With Alexander, Heiko, and Vasily we are in really good shape.
I will continue to act as the maintainer for KVM on s390 together with
Janosch.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Change Alexander Gordeev's status so he is maintainer
instead of reviewer for s390.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There's list corruption on cgrp_cpuctx_list. This happens on the
following path:
perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
cpu_ctx_sched_in
ctx_sched_in
ctx_pinned_sched_in
merge_sched_in
perf_cgroup_event_disable: remove the event from the list
Use list_for_each_entry_safe() to allow removing an entry during
iteration.
Fixes: 058fe1c044 ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
Syzbot found a GPF in reweight_entity. This has been bisected to
commit 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid
sched_task_group")
There is a race between sched_post_fork() and setpriority(PRIO_PGRP)
within a thread group that causes a null-ptr-deref in
reweight_entity() in CFS. The scenario is that the main process spawns
number of new threads, which then call setpriority(PRIO_PGRP, 0, -20),
wait, and exit. For each of the new threads the copy_process() gets
invoked, which adds the new task_struct and calls sched_post_fork()
for it.
In the above scenario there is a possibility that
setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread
in the group that is just being created by copy_process(), and for
which the sched_post_fork() has not been executed yet. This will
trigger a null pointer dereference in reweight_entity(), as it will
try to access the run queue pointer, which hasn't been set.
Before the mentioned change the cfs_rq pointer for the task has been
set in sched_fork(), which is called much earlier in copy_process(),
before the new task is added to the thread_group. Now it is done in
the sched_post_fork(), which is called after that. To fix the issue
the remove the update_load param from the update_load param() function
and call reweight_task() only if the task flag doesn't have the
TASK_NEW flag set.
Fixes: 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid sched_task_group")
Reported-by: syzbot+af7a719bc92395ee41b3@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220203161846.1160750-1-tadeusz.struk@linaro.org
Remove allow_fb_modifiers setting in this driver. The allow_fb_modifiers
flag was removed.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Fixes: 3d082157a2 ("drm: remove allow_fb_modifiers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204023635.15496-1-etom@igel.co.jp
Follow-up for the DRM_IOCTL_MODE_GETFB2 docs.
v2: (Daniel Stone)
- Replace fourcc.org with drm_fourcc.h because this is the
authoritative source and the website may have mismatches.
- Drop assumption that offsets will generally be 0.
- Mention that unused entries must be zero'ed out.
v3: (Pekka)
- Mention that a handle can be re-used
- Add unit for pitches/offsets
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203133753.261507-1-contact@emersion.fr
The .noinstr.text section functions may not have "current()" sanely
available. Similarly true for .entry.text, though such a check is
currently redundant. Add a check for both. In an x86_64 defconfig build,
the following functions no longer receive stackleak instrumentation:
__do_fast_syscall_32()
do_int80_syscall_32()
do_machine_check()
do_syscall_64()
exc_general_protection()
fixup_bad_iret()
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since STRING_CST may not be NUL terminated, strncmp() was used for check
for equality. However, this may lead to mismatches for longer section
names where the start matches the tested-for string. Test for exact
equality by checking for the presences of NUL termination.
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to compare instrumentation between builds, make the verbose
mode of the plugin available during the build. This is rarely needed
(behind EXPERT) and very noisy (disabled for COMPILE_TEST).
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
fix regression introduced as part of moving to the new mount API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmH7/AUACgkQ8vlZVpUN
gaOsuQf/TFH8QNBSeEkT5ybnrS51KGTv88mdUVMcsmSMhmAFxiGJLFtMLFu9LG7b
bJYCg+Q9Rieb1qqqtGNyLe4p3ewShSzBFu8p7hzKMfu0EEcrJwTYVywSX0oYhMMm
9o+V6CPcGYVZtImihdsmDvgMRRkzoevHQFx+OLhkaq4Qd9ZEdohchYIhRFNXwd+w
CJiL0TFAnrb4QfWgtq3HyY7aoQumf8YI15C+RTfykzCBhZRFRKXjVXPdIjfGe4O2
Fpjr4gSsgYK0Er0LLJvESeFFVpFz+NV7q9W/Vj5ahaKJDpiVGzL/OPZsnafzHPPy
CSa+iP3ZLcTb+KRTOZ1mgjvS34Cmyw==
=DpdZ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before creating the maps.
- Return error if procfs isn't mounted for PID namespaces when synthesizing records
for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid garbling the
screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part got into 5.17.
- Check for NULL pointer before dereference writing debug info about a sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYf/YRAAKCRCyPKLppCJ+
JxH/AQC27sHgz79DrCuA83CYEBRtzXuv0AJ/naVnUAOYm8OVKwEA5fxeJQj9Kiiw
46UIQ45fIxFAT448N9t2g61R6ZQw2g4=
=DUlE
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
(Peter Zijlstra)
-----BEGIN PGP SIGNATURE-----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=0tH5
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
from platform_get_irq() so that deferred probing still works
-----BEGIN PGP SIGNATURE-----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=BPlD
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix altera and xgene EDAC drivers to propagate the correct error code
from platform_get_irq() so that deferred probing still works"
* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix deferred probing
EDAC/altera: Fix deferred probing
