All CPUs in a package are represented in an HFI table. There exists an
HFI table per package. Thus, CPUs in a package need to coordinate to
initialize and access the table. Do such coordination during CPU hotplug.
Use the first CPU to come online in a package to initialize the HFI
instance and the data structure representing it. Other CPUs in the same
package need only to register or unregister themselves in that data
structure.
The HFI depends on both the package-level thermal management and the local
APIC thermal local vector. Thus, to ensure that a CPU coming online has an
associated HFI instance when the hardware issues an HFI event, enable the
HFI only after having enabled the local APIC thermal vector. The thermal
throttle driver takes care of the needed package-level initialization.
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Intel Hardware Feedback Interface provides guidance to the operating
system about the performance and energy efficiency capabilities of each
CPU in the system. Capabilities are numbers between 0 and 255 where a
higher number represents a higher capability. For each CPU, energy
efficiency and performance are reported as separate capabilities.
Hardware computes these capabilities based on the operating conditions of
the system such as power and thermal limits. These capabilities are shared
with the operating system in a table resident in memory. Each package in
the system has its own HFI instance. Every logical CPU in the package is
represented in the table. More than one logical CPUs may be represented in
a single table entry. When the hardware updates the table, it generates a
package-level thermal interrupt.
The size and format of the HFI table depend on the supported features and
can only be determined at runtime. To minimally initialize the HFI, parse
its features and allocate one instance per package of a data structure with
the necessary parameters to read and navigate a local copy (i.e., owned by
the driver) of individual HFI tables.
A subsequent changeset will provide per-CPU initialization and interrupt
handling.
Reviewed-by: Len Brown <len.brown@intel.com>
Co-developed by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the CPUID feature bit and the model-specific registers needed to
identify and configure the Intel Hardware Feedback Interface.
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Start a documentation file to describe the purpose and operation of Intel's
Hardware Feedback Interface. Describe how this interface is used in Linux
to relay performance and energy efficiency updates to userspace.
Reviewed-by: Len Brown <len.brown@intel.com>
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use proper tables and RST markup to document the atomic instructions
in a structured way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220131183638.3934982-6-hch@lst.de
In addition to the normal 64-bit instruction encoding, eBPF also has
a single instruction that uses a second 64-bit bits for a second
immediate value. Instead of only documenting this format deep down
in the document mention it in the instruction encoding section.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220131183638.3934982-5-hch@lst.de
Use consistent terminology and structured RST elements to better document
these two oddball instructions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220131183638.3934982-4-hch@lst.de
Add a separate section and a little intro blurb for the regular load and
store instructions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220131183638.3934982-3-hch@lst.de
The intention of commit 886a9c1347 ("PCI: dwc: Move link handling into
common code") was to standardize the behavior of link down as explained
in its commit log:
"The behavior for a link down was inconsistent as some drivers would fail
probe in that case while others succeed. Let's standardize this to
succeed as there are usecases where devices (and the link) appear later
even without hotplug. For example, a reconfigured FPGA device."
The pci-imx6 still fails to probe when the link is not present, which
causes the following warning:
imx6q-pcie 8ffc000.pcie: Phy link never came up
imx6q-pcie: probe of 8ffc000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 0 PID: 30 at drivers/regulator/core.c:2257 _regulator_put.part.0+0x1b8/0x1dc
Modules linked in:
CPU: 0 PID: 30 Comm: kworker/u2:2 Not tainted 5.15.0-next-20211103 #1
Hardware name: Freescale i.MX6 SoloX (Device Tree)
Workqueue: events_unbound async_run_entry_fn
[<c0111730>] (unwind_backtrace) from [<c010bb74>] (show_stack+0x10/0x14)
[<c010bb74>] (show_stack) from [<c0f90290>] (dump_stack_lvl+0x58/0x70)
[<c0f90290>] (dump_stack_lvl) from [<c012631c>] (__warn+0xd4/0x154)
[<c012631c>] (__warn) from [<c0f87b00>] (warn_slowpath_fmt+0x74/0xa8)
[<c0f87b00>] (warn_slowpath_fmt) from [<c076b4bc>] (_regulator_put.part.0+0x1b8/0x1dc)
[<c076b4bc>] (_regulator_put.part.0) from [<c076b574>] (regulator_put+0x2c/0x3c)
[<c076b574>] (regulator_put) from [<c08c3740>] (release_nodes+0x50/0x178)
Fix this problem by ignoring the dw_pcie_wait_for_link() error like
it is done on the other dwc drivers.
Tested on imx6sx-sdb and imx6q-sabresd boards.
Link: https://lore.kernel.org/r/20220106103645.2790803-1-festevam@gmail.com
Fixes: 886a9c1347 ("PCI: dwc: Move link handling into common code")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: <stable@vger.kernel.org>
Pull cgroup fixes from Tejun Heo:
- Eric's fix for a long standing cgroup1 permission issue where it only
checks for uid 0 instead of CAP which inadvertently allows
unprivileged userns roots to modify release_agent userhelper
- Fixes for the fallout from Waiman's recent cpuset work
* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
cgroup-v1: Require capabilities to set release_agent
cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()
cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy
Alex Elder says:
====================
net: ipa: enable register retention
With runtime power management in place, we sometimes need to issue
a command to enable retention of IPA register values before power
collapse. This requires a new Device Tree property, whose presence
will also be used to signal that the command is required.
====================
Link: https://lore.kernel.org/r/20220201150205.468403-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse. This is done by
issuing a QMP request to the AOSS microcontroller. A similar
request ondoes that request.
We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that. But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.
Fixes: 1aac309d32 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some systems, the IPA driver must make a request to ensure that
its registers are retained across power collapse of the IPA hardware.
On such systems, we'll use the existence of the "qcom,qmp" property
as a signal that this request is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks(). It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.
Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.
Fixes: 4716909cc5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
should not use fast commit log data directly, add le32_to_cpu().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0b5b5a62b9 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range")
Cc: stable@kernel.org
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220126063146.2302-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the description of @shrink and @sc in jbd2_journal_shrink_scan() and
jbd2_journal_shrink_count() kernel-doc comment to remove warnings found
by running scripts/kernel-doc, which is caused by using 'make W=1'.
fs/jbd2/journal.c:1296: warning: Function parameter or member 'shrink'
not described in 'jbd2_journal_shrink_scan'
fs/jbd2/journal.c:1296: warning: Function parameter or member 'sc' not
described in 'jbd2_journal_shrink_scan'
fs/jbd2/journal.c:1320: warning: Function parameter or member 'shrink'
not described in 'jbd2_journal_shrink_count'
fs/jbd2/journal.c:1320: warning: Function parameter or member 'sc' not
described in 'jbd2_journal_shrink_count'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220110132841.34531-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
By mistake we fail to return an error from ext4_fill_super() in case
that ext4_alloc_sbi() fails to allocate a new sbi. Instead we just set
the ret variable and allow the function to continue which will later
lead to a NULL pointer dereference. Fix it by returning -ENOMEM in the
case ext4_alloc_sbi() fails.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220119130209.40112-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
No functionality change as such in this patch. This only refactors the
common piece of code which waits for t_updates to finish into a common
function named as jbd2_journal_wait_updates(journal_t *)
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/8c564f70f4b2591171677a2a74fccb22a7b6c3a4.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current code does not fully takes care of krealloc() error case, which
could lead to silent memory corruption or a kernel bug. This patch
fixes that.
Also it cleans up some duplicated error handling logic from various
functions in fast_commit.c file.
Reported-by: luo penghao <luo.penghao@zte.com.cn>
Suggested-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/62e8b6a1cce9359682051deb736a3c0953c9d1e9.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
ext4_prepare_inline_data() already checks for ext4_get_max_inline_size()
and returns -ENOSPC. So there is no need to check it twice within
ext4_da_write_inline_data_begin(). This patch removes the extra check.
It also makes it more clean.
No functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/cdd1654128d5105550c65fd13ca5da53b2162cc4.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.
<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!
<code snip>
212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
213 void *buffer, loff_t pos, unsigned int len)
214 {
<...>
223 BUG_ON(!EXT4_I(inode)->i_inline_off);
224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).
[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
in the follow scenario:
1. jbd start transaction n
2. task A get new handle for transaction n+1
3. task A do some actions and add inode to FC_Q_MAIN fc_q
4. jbd complete transaction n and clear FC_Q_MAIN fc_q
5. task A call fsync
Fast commit will lost the file actions during a full commit.
we should also add updates to staging queue during a full commit.
and in ext4_fc_cleanup(), when reset a inode's fc track range, check
it's i_sync_tid, if it bigger than current transaction tid, do not
rest it, or we will lost the track range.
And EXT4_MF_FC_COMMITTING is not needed anymore, so drop it.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220117093655.35160-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions and mark FC_INELIGIBLE
4. jbd complete transaction n and clean FC_INELIGIBLE
5. task A call fsync
In this case fast commit will not fallback to full commit and
transaction n+1 also not handled by jbd.
Make ext4_fc_mark_ineligible() also record transaction tid for
latest ineligible case, when call ext4_fc_cleanup() check
current transaction tid, if small than latest ineligible tid
do not clear the EXT4_MF_FC_INELIGIBLE.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Suggested-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
For now in ext4_mb_new_blocks_simple, if we found a block which
should be excluded then will switch to next group, this may
probably cause 'group' run out of range.
Change to check next block in the same group when get a block should
be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP
and add error checking.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
During fast commit replay procedure, we clear inode blocks bitmap in
ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate
blocks still in use.
Make ext4_fc_record_regions() also record physical disk regions used by
inodes during replay procedure. Then ext4_mb_new_blocks_simple() can
excludes these blocks in use.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220110035141.1980-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.
Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.
Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid.
Fixes: 6cffd79504 ("misc: fastrpc: Add support for dmabuf exporter")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20220127130218.809261-1-minipli@grsecurity.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrii Nakryiko says:
====================
Clean up remaining missed uses of deprecated libbpf APIs across samples/bpf,
selftests/bpf, libbpf, and bpftool.
Also fix uninit variable warning in bpftool.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Switch to using new bpf_xdp_*() APIs across all selftests. Take
advantage of a more straightforward and user-friendly semantics of
old_prog_fd (0 means "don't care") in few places.
This is a redo of 544356524d ("selftests/bpf: switch to new libbpf XDP
APIs"), which was previously reverted to minimize conflicts during bpf
and bpf-next tree merge.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-6-andrii@kernel.org
Newer GCC complains about capturing the address of unitialized variable.
While there is nothing wrong with the code (the variable is filled out
by the kernel), initialize the variable anyway to make compiler happy.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-4-andrii@kernel.org
libbpf 1.0 is not going to support passing ifindex to BPF
prog/map/helper feature probing APIs. Remove the support for BPF offload
feature probing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-3-andrii@kernel.org
Open-code bpf_map__is_offload_neutral() logic in one place in
to-be-deprecated bpf_prog_load_xattr2.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-2-andrii@kernel.org
When building with 'make -s', there is some output from resolve_btfids:
$ make -sj"$(nproc)" oldconfig prepare
MKDIR .../tools/bpf/resolve_btfids/libbpf/
MKDIR .../tools/bpf/resolve_btfids//libsubcmd
LINK resolve_btfids
Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.
Fixes: fbbb68de80 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
Merge series from Samuel Holland <samuel@sholland.org>:
This series extends the sun4i-i2s binding and driver to support some
newer versions of the hardware. Each instance of the hardwar now has
multiple input/output pins, and channels can be muxed between them.
Since so far the driver only supports a "default" linear channel map,
the driver changes are minimal.
Samuel Holland (3):
ASoC: dt-bindings: sun4i-i2s: Add compatibles for R329 and D1
ASoC: sun4i-i2s: Update registers for more channels
ASoC: sun4i-i2s: Add support for the R329/D1 variant
.../sound/allwinner,sun4i-a10-i2s.yaml | 5 ++
sound/soc/sunxi/sun4i-i2s.c | 68 +++++++++++++++----
2 files changed, 59 insertions(+), 14 deletions(-)
--
2.33.1
Do not always copy ethernet header in mt{7615,7915,7921}_reverse_frag0_hdr_trans
and use a pointer instead.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Client mode on DFS channels was broken, because the old code was activating
the DFS detector on radar channels while leaving it in CAC state.
This was caused by making the decision based on the channel radar flag,
instead of hw->conf.radar_enabled.
In order to properly deal with the various corner cases, rip out the state
handling code and replace it with something that's much easier to reason
about.
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Commit 4adc33f36d ("drm/edid: Split deep color modes between RGB and
YUV444") introduced two new variables in struct drm_display_info and
their documentation, but the documentation part had a typo resulting in
a doc build warning.
Fixes: 4adc33f36d ("drm/edid: Split deep color modes between RGB and YUV444")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202094340.875190-1-maxime@cerno.tech
The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.
Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.
Amend the filtering appropriately.
Fixes: 57fb32e632 ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
The code that set the scdc_enabled flag to ensure it was
disabled at boot time also ran on Pi0-3 where there is no
SCDC support. This lead to a warning in vc4_hdmi_encoder_post_crtc_disable
due to vc4_hdmi_disable_scrambling being called and trying to
read (and write) register HDMI_SCRAMBLER_CTL which doesn't
exist on those platforms.
Only set the flag should the interface be configured to support
more than HDMI 1.4.
Fixes: 1998646129 ("drm/vc4: hdmi: Introduce a scdc_enabled flag")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127134559.292778-1-maxime@cerno.tech
The existing logic was flawed in that it could try reading the
2711 specific registers for HPD on a CM1/3 where the HPD GPIO
hadn't been defined in DT.
Ensure we don't do the 2711 register read on invalid hardware,
and then
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127131754.236074-1-maxime@cerno.tech
