An existing comment already mentions we: "cannot use devm_iio_channel_get
because x86 systems lack the device<->channel maps which iio_channel_get
will try to use when passed a non NULL device pointer".
Work around this by registering a devm action to free the iio-channels.
This is a step on the way to fully converting the probe() function to
only use devm managed resources.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Refactor probe a bit, introducing a new
axp288_fuel_gauge_read_initial_regs() helper. This replaces a whole
bunch of gotos and removes the unblock_punit_i2c_access label.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a dev local variable to probe() as shortcut for &pdev->dev, this is
a preparation change for making more use of devm managed resources.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The i915_ttm_accel_move() function may return error codes that should
be propagated further up the stack rather than consumed assuming that
the accel move failed and could be replaced with a memcpy move.
For -EINTR, -ERESTARTSYS and -EAGAIN, just propagate those codes, rather
than retrying with a memcpy move.
Fixes: 2b0a750caf ("drm/i915/ttm: Failsafe migration blits")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201070340.16457-1-thomas.hellstrom@linux.intel.com
-queue
Tony Nguyen says:
====================
10GbE Intel Wired LAN Driver Updates 2022-01-31
Alexander Lobakin says:
This is an interpolation of [0] to other Intel Ethernet drivers
(and is (re)based on its code).
The main aim is to keep XDP metadata not only in case with
build_skb(), but also when we do napi_alloc_skb() + memcpy().
All Intel drivers suffers from the same here:
- metadata gets lost on XDP_PASS in legacy-rx;
- excessive headroom allocation on XSK Rx to skbs;
- metadata gets lost on XSK Rx to skbs.
Those get especially actual in XDP Hints upcoming.
I couldn't have addressed the first one for all Intel drivers due to
that they don't reserve any headroom for now in legacy-rx mode even
with XDP enabled. This is hugely wrong, but requires quite a bunch
of work and a separate series. Luckily, ice doesn't suffer from
that.
igc has 1 and 3 already fixed in [0].
[0] https://lore.kernel.org/netdev/163700856423.565980.10162564921347693758.stgit@firesoul
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows us to get console messages if the firmware crashed during
early init, or if an operation failed and we're about to shut down.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-10-marcan@marcan.st
Make all the iovar name arguments const char * instead of just char *.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-9-marcan@marcan.st
This was missing a NULL check, and we can collapse the strlen/alloc/copy
into a devm_kstrdup().
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-8-marcan@marcan.st
The driver was enabling IRQs before the message processing was
initialized. This could cause IRQs to come in too early and crash the
driver. Instead, move the IRQ enable and hostready to a bus preinit
function, at which point everything is properly initialized.
Fixes: 9e37f045d5 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-7-marcan@marcan.st
The alignment check was wrong (e.g. & 4 instead of & 3), and the logic
was also inefficient if the length was not a multiple of 4, since it
would needlessly fall back to copying the entire buffer bytewise.
We already have a perfectly good memcpy_toio function, so just call that
instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers
was already using it anyway.
Fixes: 9e37f045d5 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st
Move one of the declarations from sdio.c to pcie.c, since it makes no
sense in the former (SDIO support is optional), and add missing ones.
Fixes: 75729e110e ("brcmfmac: expose firmware config files through modinfo")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-5-marcan@marcan.st
If boardrev is missing from the NVRAM we add a default one, but this
might need more space in the output buffer than was allocated. Ensure
we have enough padding for this in the buffer.
Fixes: 46f2b38a91 ("brcmfmac: insert default boardrev in nvram data if missing")
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st
This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that
the CLM blob is released in the device remove path.
Fixes: 82f93cf46d ("brcmfmac: get chip's default RAM info during PCIe setup")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-2-marcan@marcan.st
Variable ul_encalgo is initialized with a value that is never read,
it is being re-assigned a new value in every case in the following
switch statement. The initialization is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220130223714.6999-1-colin.i.king@gmail.com
The coccinelle report
./include/linux/ssb/ssb_driver_gige.h:98:8-9:
WARNING: return of 0/1 in function
'ssb_gige_must_flush_posted_writes' with return type bool
Return statements in functions returning bool should use true/false
instead of 1/0.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/fa4f1fa737e715eb62a85229ac5f12bae21145cf.1642065490.git.davidcomponentone@gmail.com
As the possible failure of the ioremap(), the 'local->sram' and other
two could be NULL.
Therefore it should be better to check it in order to avoid the later
dev_dbg.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211230022926.1846757-1-jiasheng@iscas.ac.cn
A typo in qca808x_read_status means we try to set SMII mode on the port
rather than SGMII when the link speed is not 2.5Gb/s. This results in no
traffic due to the mismatch in configuration between the phy and the
mac.
v2:
Only change interface mode when the link is up
Fixes: 79c7bc0521 ("net: phy: add qca8081 read_status")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code to decide whether a system supports the PPIN (Protected
Processor Inventory Number) MSR was cloned from the Intel
implementation. Apart from the X86_FEATURE bit and the MSR numbers it is
identical.
Merge the two functions into common x86 code, but use x86_match_cpu()
instead of the switch (c->x86_model) that was used by the old Intel
code.
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220131230111.2004669-2-tony.luck@intel.com
This code calls fd_install() which gives the userspace access to the fd.
Then if copy_info_records_to_user() fails it calls put_unused_fd(fd) but
that will not release it and leads to a stale entry in the file
descriptor table.
Generally you can't trust the fd after a call to fd_install(). The fix
is to delay the fd_install() until everything else has succeeded.
Fortunately it requires CAP_SYS_ADMIN to reach this code so the security
impact is less.
Fixes: f644bc449b ("fanotify: fix copy_event_to_user() fid error clean up")
Link: https://lore.kernel.org/r/20220128195656.GA26981@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Jan Kara <jack@suse.cz>
This allows cpcap-battery to detect whitch battery is inserted, HW4X or
BW8X for xt875 and EB41 for xt894 by examining the battery nvmem. If no
known battery is detected sane defaults are used.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the AMD mce sysfs code to use default_groups field which has
been the preferred way since
aa30f47cf6 ("kobject: Add support for default attribute groups to kobj_type")
so that the obsolete default_attrs field can be removed soon.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20220106103537.3663852-1-gregkh@linuxfoundation.org
Handle non-APICv interrupt delivery in vendor code, even though it means
VMX and SVM will temporarily have duplicate code. SVM's AVIC has a race
condition that requires KVM to fall back to legacy interrupt injection
_after_ the interrupt has been logged in the vIRR, i.e. to fix the race,
SVM will need to open code the full flow anyways[*]. Refactor the code
so that the SVM bug without introducing other issues, e.g. SVM would
return "success" and thus invoke trace_kvm_apicv_accept_irq() even when
delivery through the AVIC failed, and to opportunistically prepare for
using KVM_X86_OP to fill each vendor's kvm_x86_ops struct, which will
rely on the vendor function matching the kvm_x86_op pointer name.
No functional change intended.
[*] https://lore.kernel.org/all/20211213104634.199141-4-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These calls are used for debugging and will be required for WFA
certification tests.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01179-QCAHKSWPL_SILICONZ-1
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220131031043.1295-1-alokad@codeaurora.org
Add debugfs interface "fw_dbglog_config" to configure firmware log level.
Configuration is done via WMI command WMI_DBGLOG_CFG_CMDID.
Command to configure,
echo "<dbglog_param> <values>" >
/sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config
where dbglog_param can be,
1) WMI_DEBUG_LOG_PARAM_LOG_LEVEL - configure log level for a given module
here, <values> = <0xaaaa00bb>, 'aaaa' - module id and 'bb' - loglevel
2) WMI_DEBUG_LOG_PARAM_VDEV_ENABLE - enable debug log for a given vdev
here, <values> = vdev_id
3) WMI_DEBUG_LOG_PARAM_VDEV_DISABLE - disable debug log for a given vdev
except ERROR logs
here, <values> = vdev_id
4) WMI_DEBUG_LOG_PARAM_VDEV_ENABLE_BITMAP - set vdev enable bitmap
here, <values> = vdev_enable_bitmap
5) WMI_DEBUG_LOG_PARAM_MOD_ENABLE_BITMAP - set a given log level to all the
modules specified in the module bitmap. Command to configure for this log param,
$ echo "5 <values> <module_id_index> <is_end>" >
/sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config
here,
<values> = <0xaaaaaaaa000000bb>, 'aaaaaaaa' - module bitmap and
'bb' - loglevel
<module_id_index> = index of module bitmap. Max module id is 512.
So, module_id_index is 0-15.
<is_end> = to indicate if more configuration to follow.
6) WMI_DEBUG_LOG_PARAM_WOW_MOD_ENABLE_BITMAP - Wow mode specific logging enable.
Command to configure for this log param,
$ echo "6 <values> <module_id_index> <is_end>" >
/sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config
here,
<values> = <0xaaaaaaaa000000bb>, 'aaaaaaaa' - module bitmap and
'bb' - loglevel
<module_id_index> = index of module bitmap. Max module id is 512.
So, module_id_index is 0-15.
<is_end> = to indicate if more configuration to follow.
Sample command usage,
To enable module WLAN_MODULE_WMI and log level ATH11K_FW_DBGLOG_VERBOSE,
echo "1 0x10001" > /sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config
To enable module bit map from 32 to 63 and log level ATH11K_FW_DBGLOG_VERBOSE,
echo "5 0xffffffff00000001 1 1" > /sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1
Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642405103-32302-1-git-send-email-quic_seevalam@quicinc.com
This patch adds support for the Brainboxes US-159, US-235 and US-320
USB-to-Serial devices.
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen <allen.chen@ite.com.tw>
Tested-by: Hsin-yi Wang <hsinyi@chromium.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw
As stated in [1], negative current values are used for discharging
batteries.
AXP PMICs internally have two different ADC channels for shunt current
measurement: one used during charging and one during discharging.
The values reported by these ADCs are unsigned.
While the driver properly selects ADC channel to get the data from,
it doesn't apply negative sign when reporting discharging current.
[1] Documentation/ABI/testing/sysfs-class-power
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a bottom table border to complete the table format and prevent
a documentation build warning.
Documentation/ABI/testing/sysfs-class-power:459: WARNING: Malformed table.
No bottom table border found.
Fixes: 1b0b6cc803 ("power: supply: add charge_behaviour attributes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: f7a388d6cd ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When reprogramming M/N live on BDW+ we must write the LINK_N
register last as it's the one that arms the double buffered
register update for all the M/N registers. Document this so
that we don't accidentally break things.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No point in special casing the check of dp_m2_n2 on pre-bdw platforms.
Either the transcoder has M2/N2 in which case the values should be
set to something sensible, or it doesn't in which case dp_m2_n2 is
always zeroed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Program the PCH transcoder M2/N2 values appropriately. We're
still missing a few things for PCH port DRRS but at least this
means we can do readout/state check for dp_m2_n2 unconditionally.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make life simpler by always programming DP M2/N2 with a consistent
value. This will lets use do state readout+chec unconditionally.
I was first going to just set M2/N2=M1/N1 but then it occurred
to me that it might interfere with fastboot on account of BIOS
likely leaving the registers zeroed. So let's zero out the values
instead (except TU where a zero register value actually means '1').
Still not sure that's the best approach but lets go with it for
now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we allow DRRS on IVB PCH ports, but we're missing a
few programming steps meaning it is guaranteed to not work.
And on HSW DRRS is not supported on anything but port A ever
as only transcoder EDP has the M2/N2 registers (though I'm
not sure if HSW ever has eDP on any other port).
Starting from BDW all transcoders have the dynamically
reprogrammable M/N registers so DRRS could work on any
port.
Stop initializing DRRS on ports where it cannot possibly work.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Calling platform_get_irq_optional() doesn't make sense if you then bail out
on any error it returns. Switch to calling platform_get_irq() instead and
remove dev_err() call as platform_get_irq() already curses loudly on error.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[why]
Unlock is needed on the error handling path to prevent dead lock.
v3d_submit_cl_ioctl and v3d_submit_csd_ioctl is missing unlock.
[how]
Fix this by changing goto target on the error handling path. So
changing the goto to target an error handling path
that includes drm_gem_unlock reservations.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1643377262-109975-1-git-send-email-lyz_cs@pku.edu.cn
Instead of passing in the whole crtc state let's pass in just
the bits of state we need. This will help with the DRRS code
which shouldn't really be accessing the atomic state stuff directly
as it gets called outside the normal atomic flows.
v2: Fix set_m1_n1 vs. set_m2_n2 fumble for i9xx (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make things a bit more explicit by splitting
intel_cpu_transcoder_set_m_n() into separate variants for M1/N1 vs.
M2/N2. Makes the DRRS M/N programming at least more obvious.
Note that for the MST and DRRS cases we don't need to call the
M2/N2 variant at all since the transcoders that support those
do not have the M2/N2 registers.
Same could be said for i9xx_crtc_enable() but I want to do a
higher level code sharing between that valleyview_crtc_enable()
later in which case we do need the M2/N2 variant. This is also
why I keep the transcoder_has_m2_n2() in intel_cpu_transcoder_set_m2_n2()
so the caller doesn't have necessarily care what the chosen
transcoder supports.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
