sk_gso_max_size is set based on the dst dev. Both users of it
adjust the value by the same offset - (MAX_TCP_HEADER + 1). Rather
than compute the same adjusted value on each call do the adjustment
once when set.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220125024511.27480-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Regmap gives us caching, debugging infrastructure and other things for
free and does away with open-coded bit-fiddling implementations.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-10-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make sure to freeze the configuration of the chip during the programming
of 32-bit registers. This avoids the processing of invalid intermediate
states.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-9-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clock skip function of this chip is not necessarily desirable in
all hardware appliances. This patch makes the feature configurable
through a device-tree property.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-8-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The CS2000 chip features two input clocks, REF_CLK and CLK_IN.
In static mode, the output clock (CLK_OUT) is directly derived from
REF_CLK, and CLK_IN is ignored. In dynamic mode, CLK_IN is used by the
digital PLL.
In dynamic mode, a low-frequency ratio configuration that uses a higher
multiplier factor.
Until now, only the static mode and high-frequency divider rations of
the hardware was supported by the driver. This patch adds support for
dynamic mode and both ratios:
* Parse a new OF property 'cirrus,dynamic-mode' to determine the mode
* In dynamic mode, present CLK_IN as parent clock, else use REF_CLK
* The low-frequency ratio mode is automatically selected, depending
on the mode of operation and the given input and output rates
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-7-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The aux output pin can be configured to output either of the two clock
inputs, the generated clock or the pll lock status. Allow access to
this feature through a new optional device-tree property.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-6-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This new flag exists to enable the dynamic mode of the hardware.
When not given, the static mode is used.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220125093336.226787-5-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This mode allows the PLL to maintain lock even when CLK_IN has
missing pulses for up to 20 ms.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220125093336.226787-4-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This new optional property can be used to control the function of the
auxiliary output pin. Introduce a new dt-bindings include file that
contains the numerical values.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220125093336.226787-3-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.
[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.
v2:
Don't drop is_blanked logic
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: torvalds@linux-foundation.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HCI_EV_VENDOR is in fact variable length since it acts as metaevent
where a vendor can implement their own event sets.
In addition to it this makes use of bt_dev_warn_ratelimited to supress
the amount of logging in case the event has more data than expected.
Fixes: 3e54c5890c ("Bluetooth: hci_event: Use of a function table to handle HCI event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The invalid SCO handle error is normally caused by a race in the USB
transport where the data and event happen to be 2 different endpoints
so the event carrying the SCO handle is processed after its data.
Note: This can probably be resolved with use of force_poll_sync
debugfs.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Former are always inlined so do that for the latter too, for
consistency.
Size impact is a whopping 5 bytes increase! :-)
text data bss dec hex filename
22350551 8213184 1917164 32480899 1ef9e83 vmlinux.x86-64.defconfig.before
22350556 8213152 1917164 32480872 1ef9e68 vmlinux.x86-64.defconfig.after
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20220113155357.4706-3-bp@alien8.de
Make it consistent with the atomic/atomic-instrumented.h helpers.
And defconfig size is actually going down!
text data bss dec hex filename
22352096 8213152 1917164 32482412 1efa46c vmlinux.x86-64.defconfig.before
22350551 8213184 1917164 32480899 1ef9e83 vmlinux.x86-64.defconfig.after
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20220113155357.4706-2-bp@alien8.de
It was found that reading /proc/lockdep after a lockdep splat may
potentially cause an access to freed memory if lockdep_unregister_key()
is called after the splat but before access to /proc/lockdep [1]. This
is due to the fact that graph_lock() call in lockdep_unregister_key()
fails after the clearing of debug_locks by the splat process.
After lockdep_unregister_key() is called, the lock_name may be freed
but the corresponding lock_class structure still have a reference to
it. That invalid memory pointer will then be accessed when /proc/lockdep
is read by a user and a use-after-free (UAF) error will be reported if
KASAN is enabled.
To fix this problem, lockdep_unregister_key() is now modified to always
search for a matching key irrespective of the debug_locks state and
zap the corresponding lock class if a matching one is found.
[1] https://lore.kernel.org/lkml/77f05c15-81b6-bddd-9650-80d5f23fe330@i-love.sakura.ne.jp/
Fixes: 8b39adbee8 ("locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lkml.kernel.org/r/20220103023558.1377055-1-longman@redhat.com
As I've fiddled about with the atomic infrastructure a fair bit now,
Peter suggested I should add myself as a reviewer or maintainer to make
sure I'm Cc'd on anything I might have an opinion on.
For now, add myself as a reviewer.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220104095018.1990058-1-mark.rutland@arm.com
The membarrier command MEMBARRIER_CMD_QUERY allows querying the
available membarrier commands. When the membarrier-rseq fence commands
were added, a new MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK was
introduced with the intent to expose them with the MEMBARRIER_CMD_QUERY
command, the but it was never added to MEMBARRIER_CMD_BITMASK.
The membarrier-rseq fence commands are therefore not wired up with the
query command.
Rename MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK to
MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK (the bitmask is not a command
per-se), and change the erroneous
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ_BITMASK (which does not
actually exist) to MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ.
Wire up MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK in
MEMBARRIER_CMD_BITMASK. Fixing this allows discovering availability of
the membarrier-rseq fence feature.
Fixes: 2a36ab717e ("rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 5.10+
Link: https://lkml.kernel.org/r/20220117203010.30129-1-mathieu.desnoyers@efficios.com
Add a compatible for MSM8226 which also uses the USB HS PHY.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211118210210.160895-5-luca@z3ntu.xyz
Configure the SMBB charger according to the downstream kernel, some
values are rounded according to driver warnings.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211118210210.160895-4-luca@z3ntu.xyz
We have some many cases that will create child process as well, such as
pidfd_wait. Previously, we will signal/kill the parent process when it
is time out, but this signal will not be sent to its child process. In
such case, if child process doesn't terminate itself, ksefltest framework
will hang forever.
Here we group all its child processes so that kill() can signal all of
them in timeout.
Fixed change log: Shuah Khan <skhan@linuxfoundation.org>
Suggested-by: yang xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use 'tee' to send the test output to stdout in addition to the current
output file. This makes the output easier to handle in automated test
systems and is superior to only later dumping the output file contents
to stdout, since this way the test output can be interleaved with other
log messages, like from the kernel, so that chronology is preserved,
making it easier to detect issues.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.
However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.
In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.
Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:
./run_kselftest.sh -c rtc
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce KUNIT_BINARY_PTR_ASSERTION to match KUNIT_BINARY_INT_ASSERTION
and make KUNIT_EXPECT_EQ and KUNIT_EXPECT_PTREQ use these instead of
shared intermediate macros that only remove the need to type "==" or
"!=".
The current macro chain looks like:
KUNIT_EXPECT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION => KUNIT_BASE_EQ_MSG_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
KUNIT_EXPECT_PTR_EQ_MSG => KUNIT_BINARY_PTR_EQ_MSG_ASSERTION => KUNIT_BASE_EQ_MSG_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
<ditto for NE and ASSERT>
After this change:
KUNIT_EXPECT_EQ_MSG => KUNIT_BINARY_INT_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
KUNIT_EXPECT_PTR_EQ_MSG => KUNIT_BINARY_PTR_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce a KUNIT_BINARY_INT_ASSERTION for the likes of KUNIT_EXPECT_LT.
This is analagous to KUNIT_BINARY_STR_ASSERTION.
Note: this patch leaves the EQ/NE macros untouched since those share
some intermediate macros for the pointer-based macros.
The current macro chain looks like:
KUNIT_EXPECT_LT_MSG => KUNIT_BASE_LT_MSG_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
KUNIT_EXPECT_GT_MSG => KUNIT_BASE_GT_MSG_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
<ditto for LE, GE, and ASSERT variants>
After this change:
KUNIT_EXPECT_LT_MSG => KUNIT_BINARY_INT_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
KUNIT_EXPECT_GT_MSG => KUNIT_BINARY_INT_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
I.e. we've traded all the unique intermediary macros for a single shared
KUNIT_BINARY_INT_ASSERTION. The only difference is that users of
KUNIT_BINARY_INT_ASSERTION also need to pass the operation (==, <, etc.).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current macro chain looks like:
KUNIT_EXPECT_STREQ => KUNIT_EXPECT_STREQ_MSG => KUNIT_BINARY_STR_EQ_MSG_ASSERTION => KUNIT_BINARY_STR_ASSERTION.
KUNIT_ASSERT_STREQ => KUNIT_ASSERT_STREQ_MSG => KUNIT_BINARY_STR_EQ_MSG_ASSERTION => KUNIT_BINARY_STR_ASSERTION.
<ditto for STR_NE>
After this change:
KUNIT_EXPECT_STREQ => KUNIT_EXPECT_STREQ_MSG => KUNIT_BINARY_STR_ASSERTION.
KUNIT_ASSERT_STREQ => KUNIT_ASSERT_STREQ_MSG => KUNIT_BINARY_STR_ASSERTION.
<ditto for STR_NE>
All the intermediate macro did was pass in "==" or "!=", so it seems
better to just drop them at the cost of a bit more copy-paste.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We have the intermediate macros for KUNIT_EXPECT_PTR_GT() and friends,
but these macros don't exist.
I can see niche usecases for these macros existing, but since we've been
fine without them for so long, let's drop this dead code.
Users can instead cast the pointers and use the other GT/LT macros.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There's quite a few macros in play for KUnit assertions.
The current macro chain looks like:
KUNIT_EXPECT_EQ => KUNIT_BINARY_EQ_ASSERTION => KUNIT_BINARY_EQ_MSG_ASSERTION
KUNIT_EXPECT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION
KUNIT_ASSERT_EQ => KUNIT_BINARY_EQ_ASSERTION => KUNIT_BINARY_EQ_MSG_ASSERTION
KUNIT_ASSERT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION
After this change:
KUNIT_EXPECT_EQ => KUNIT_EXPECT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION
KUNIT_ASSERT_EQ => KUNIT_ASSERT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION
and we can drop the intermediate KUNIT_BINARY_EQ_ASSERTION.
This change does this for all the other macros as well.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Python 3.10.0 contains:
9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)")
It causes importlib.util to no longer import importlib.abs, which leads
to the following error when trying to use kunit with qemu:
AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'?
Add the missing import.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This field has been split out from kunit_assert to make the struct less
heavy along with the filename and line number.
This change drops the assert_type field and cleans up all the macros
that were plumbing assert_type into kunit_assert.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is per Linus's suggestion in [1].
The issue there is that every KUNIT_EXPECT/KUNIT_ASSERT puts a
kunit_assert object onto the stack. Normally we rely on compilers to
elide this, but when that doesn't work out, this blows up the stack
usage of kunit test functions.
We can move some data off the stack by making it static.
This change introduces a new `struct kunit_loc` to hold the file and
line number and then just passing assert_type (EXPECT or ASSERT) as an
argument.
In [1], it was suggested to also move out the format string as well, but
users could theoretically craft a format string at runtime, so we can't.
This change leaves a copy of `assert_type` in kunit_assert for now
because cleaning up all the macros to not pass it around is a bit more
involved.
Here's an example of the expanded code for KUNIT_FAIL():
if (__builtin_expect(!!(!(false)), 0)) {
static const struct kunit_loc loc = { .file = ... };
struct kunit_fail_assert __assertion = { .assert = { .type ... };
kunit_do_failed_assertion(test, &loc, KUNIT_EXPECTATION, &__assertion.assert, ...);
};
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We call this function first thing for all the assertion `format()`
functions.
This is the part that prints the file and line number and assertion type
(EXPECTATION, ASSERTION).
Having it as part of the format functions lets us have the flexibility
to not print that information (or print it differently) for new
assertion types, but I think this we don't need that.
And in the future, we'd like to consider factoring that data (file,
line#, type) out of the kunit_assert struct and into a `static`
variable, as Linus suggested [1], so we'd need to extract it anyways.
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The `struct kunit* test` field in kunit_assert is unused.
Note: string_stream needs it, but it has its own `test` field. I assume
`test` in `kunit_assert` predates this and was leftover after some
refactoring.
This patch removes the field and cleans up the macros to avoid
needlessly passing around `test`.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the code always calls kunit_do_assertion() even though it does
nothing when `pass` is true.
This change moves the `if(!(pass))` check into the macro instead
and renames the function to kunit_do_failed_assertion().
I feel this a bit easier to read and understand.
This has the potential upside of avoiding a function call that does
nothing most of the time (assuming your tests are passing) but comes
with the downside of generating a bit more code and branches. We try to
mitigate the branches by tagging them with `unlikely()`.
This also means we don't have to initialize structs that we don't need,
which will become a tiny bit more expensive if we switch over to using
static variables to try and reduce stack usage. (There's runtime code
to check if the variable has been initialized yet or not).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, these macros are only really documented near the bottom of
https://www.kernel.org/doc/html/latest/dev-tools/kunit/api/test.html#c.KUNIT_FAIL.
E.g. it's likely someone might just not realize that
KUNIT_EXPECT_STREQ() exists and instead use KUNIT_EXPECT_FALSE(strcmp())
or similar.
This can also serve as a basic smoketest that the KUnit assert machinery
still works for all the macros.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation.
It can be found in [3].
It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
This is less verbose.
The explicit 'ret = -EIO;' has been removed because
'dma_set_mask_and_coherent()' returns 0 or -EIO, so its return code can be
used directly.
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
[3]: https://lore.kernel.org/kernel-janitors/20200716192821.321233-1-christophe.jaillet@wanadoo.fr/
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Realized that the GuC multi-lrc fini breadcrumb emit code is very
delicate as the math this code does relies on functions it calls to emit
a certain number of DWs. Add a few GEM_BUG_ONs to assert the math is
correct.
v2:
- Rebase + resend for CI
(Checkpatch)
- Fix blank line warning
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119210639.33053-1-matthew.brost@intel.com
When an admin enables audit at early boot via the "audit=1" kernel
command line the audit queue behavior is slightly different; the
audit subsystem goes to greater lengths to avoid dropping records,
which unfortunately can result in problems when the audit daemon is
forcibly stopped for an extended period of time.
This patch makes a number of changes designed to improve the audit
queuing behavior so that leaving the audit daemon in a stopped state
for an extended period does not cause a significant impact to the
system.
- kauditd_send_queue() is now limited to looping through the
passed queue only once per call. This not only prevents the
function from looping indefinitely when records are returned
to the current queue, it also allows any recovery handling in
kauditd_thread() to take place when kauditd_send_queue()
returns.
- Transient netlink send errors seen as -EAGAIN now cause the
record to be returned to the retry queue instead of going to
the hold queue. The intention of the hold queue is to store,
perhaps for an extended period of time, the events which led
up to the audit daemon going offline. The retry queue remains
a temporary queue intended to protect against transient issues
between the kernel and the audit daemon.
- The retry queue is now limited by the audit_backlog_limit
setting, the same as the other queues. This allows admins
to bound the size of all of the audit queues on the system.
- kauditd_rehold_skb() now returns records to the end of the
hold queue to ensure ordering is preserved in the face of
recent changes to kauditd_send_queue().
Cc: stable@vger.kernel.org
Fixes: 5b52330bbf ("audit: fix auditd/kernel connection state tracking")
Fixes: f4b3ee3c85 ("audit: improve robustness of the audit queue handling")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- New Features:
- Basic handling for case insensitive filesystems
- Initial support for fs_locations and server trunking
- Bugfixes and Cleanups:
- Cleanups to how the "struct cred *" is handled for the nfs_access_entry
- Ensure the server has an up to date ctimes before hardlinking or renaming
- Update 'blocks used' after writeback, fallocate, and clone
- nfs_atomic_open() fixes
- Improvements to sunrpc tracing
- Various null check & indenting related cleanups
- Some improvements to the sunrpc sysfs code
- Use default_groups in kobj_type
- Fix some potential races and reference leaks
- A few tracepoint cleanups in xprtrdma
-----BEGIN PGP SIGNATURE-----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=wcVT
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Basic handling for case insensitive filesystems
- Initial support for fs_locations and server trunking
Bugfixes and Cleanups:
- Cleanups to how the "struct cred *" is handled for the
nfs_access_entry
- Ensure the server has an up to date ctimes before hardlinking or
renaming
- Update 'blocks used' after writeback, fallocate, and clone
- nfs_atomic_open() fixes
- Improvements to sunrpc tracing
- Various null check & indenting related cleanups
- Some improvements to the sunrpc sysfs code:
- Use default_groups in kobj_type
- Fix some potential races and reference leaks
- A few tracepoint cleanups in xprtrdma"
[ This should have gone in during the merge window, but didn't. The
original pull request - sent during the merge window - had gotten
marked as spam and discarded due missing DKIM headers in the email
from Anna. - Linus ]
* tag 'nfs-for-5.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (35 commits)
SUNRPC: Don't dereference xprt->snd_task if it's a cookie
xprtrdma: Remove definitions of RPCDBG_FACILITY
xprtrdma: Remove final dprintk call sites from xprtrdma
sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()
net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change
NFSv4.1 test and add 4.1 trunking transport
SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt
NFSv4 handle port presence in fs_location server string
NFSv4 expose nfs_parse_server_name function
NFSv4.1 query for fs_location attr on a new file system
NFSv4 store server support for fs_location attribute
NFSv4 remove zero number of fs_locations entries error check
NFSv4: nfs_atomic_open() can race when looking up a non-regular file
NFSv4: Handle case where the lookup of a directory fails
NFSv42: Fallocate and clone should also request 'blocks used'
NFSv4: Allow writebacks to request 'blocks used'
SUNRPC: use default_groups in kobj_type
NFS: use default_groups in kobj_type
NFS: Fix the verifier for case sensitive filesystem in nfs_atomic_open()
NFS: Add a helper to remove case-insensitive aliases
...
We need to flush TLBs before releasing backing store otherwise userspace
is able to encounter stale entries if a) it is not declaring access to
certain buffers and b) it races with the backing store release from a
such undeclared execution already executing on the GPU in parallel.
The approach taken is to mark any buffer objects which were ever bound
to the GPU and to trigger a serialized TLB flush when their backing
store is released.
Alternatively the flushing could be done on VMA unbind, at which point
we would be able to ascertain whether there is potential a parallel GPU
execution (which could race), but essentially it boils down to paying
the cost of TLB flushes potentially needlessly at VMA unbind time (when
the backing store is not known to be going away so not needed for
safety), versus potentially needlessly at backing store relase time
(since we at that point cannot tell whether there is anything executing
on the GPU which uses that object).
Thereforce simplicity of implementation has been chosen for now with
scope to benchmark and refine later as required.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While all userspace tried to limit commandstreams to 64K in size,
a bug in the Mesa driver lead to command streams of up to 128K
being submitted. Allow those to avoid breaking existing userspace.
Fixes: 6dfa2fab8d ("drm/etnaviv: limit submit sizes")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
