Commit graph

1,105,074 commits

Author SHA1 Message Date
Alexei Starovoitov
588a25e924 bpf: Fix extable address check.
The verifier checks that PTR_TO_BTF_ID pointer is either valid or NULL,
but it cannot distinguish IS_ERR pointer from valid one.

When offset is added to IS_ERR pointer it may become small positive
value which is a user address that is not handled by extable logic
and has to be checked for at the runtime.

Tighten BPF_PROBE_MEM pointer check code to prevent this case.

Fixes: 4c5de12759 ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.")
Reported-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-12-16 21:41:04 +01:00
Alexei Starovoitov
433956e912 bpf: Fix extable fixup offset.
The prog - start_of_ldx is the offset before the faulting ldx to the location
after it, so this will be used to adjust pt_regs->ip for jumping over it and
continuing, and with old temp it would have been fixed up to the wrong offset,
causing crash.

Fixes: 4c5de12759 ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-12-16 21:18:26 +01:00
Andrii Nakryiko
1a6369ba62 Merge branch 'tools/bpf: Enable cross-building with clang'
Jean-Philippe Brucker says:

====================

Since v1 [1], I added Quentin's acks and applied Andrii's suggestions:
* Pass CFLAGS to libbpf link in patch 3
* Substitute CLANG_CROSS_FLAGS whole in HOST_CFLAGS to avoid accidents,
  patch 4

Add support for cross-building BPF tools and selftests with clang, by
passing LLVM=1 or CC=clang to make, as well as CROSS_COMPILE. A single
clang toolchain can generate binaries for multiple architectures, so
instead of having prefixes such as aarch64-linux-gnu-gcc, clang uses the
-target parameter: `clang -target aarch64-linux-gnu'.

Patch 1 adds the parameter in Makefile.include so tools can easily
support this. Patch 2 prepares for the libbpf change from patch 3 (keep
building resolve_btfids's libbpf in the host arch, when cross-building
the kernel with clang). Patches 3-6 enable cross-building BPF tools with
clang.

[1] https://lore.kernel.org/bpf/20211122192019.1277299-1-jean-philippe@linaro.org/
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2021-12-16 12:15:05 -08:00
Jean-Philippe Brucker
ea79020a2d selftests/bpf: Enable cross-building with clang
Cross building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Clear CROSS_COMPILE for bpftool
and the host libbpf, and use the clang flags for urandom_read and bench.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-7-jean-philippe@linaro.org
2021-12-16 12:15:05 -08:00
Jean-Philippe Brucker
bb7b75e860 tools/runqslower: Enable cross-building with clang
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to CFLAGS, and erase
CROSS_COMPILE for the bpftool build, since it needs to be executed on
the host.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-6-jean-philippe@linaro.org
2021-12-16 12:15:05 -08:00
Jean-Philippe Brucker
bdadbb44c9 bpftool: Enable cross-building with clang
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS, and adds that to CFLAGS. Remove
the cross flags for the bootstrap bpftool, and erase the CROSS_COMPILE
flag for the bootstrap libbpf.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-5-jean-philippe@linaro.org
2021-12-16 12:15:05 -08:00
Jean-Philippe Brucker
4980beb4cd tools/libbpf: Enable cross-building with clang
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to the CFLAGS.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-4-jean-philippe@linaro.org
2021-12-16 12:15:05 -08:00
Jean-Philippe Brucker
bf1be90346 tools/resolve_btfids: Support cross-building the kernel with clang
The CROSS_COMPILE variable may be present during resolve_btfids build if
the kernel is being cross-built. Since resolve_btfids is always executed
on the host, we set CC to HOSTCC in order to use the host toolchain when
cross-building with GCC. But instead of a toolchain prefix, cross-build
with clang uses a "-target" parameter, which Makefile.include deduces
from the CROSS_COMPILE variable. In order to avoid cross-building
libbpf, clear CROSS_COMPILE before building resolve_btfids.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-3-jean-philippe@linaro.org
2021-12-16 12:15:04 -08:00
Jean-Philippe Brucker
cebdb73745 tools: Help cross-building with clang
Cross-compilation with clang uses the -target parameter rather than a
toolchain prefix. Just like the kernel Makefile, add that parameter to
CFLAGS when CROSS_COMPILE is set.

Unlike the kernel Makefile, we use the --sysroot and --gcc-toolchain
options because unlike the kernel, tools require standard libraries.
Commit c91d4e47e1 ("Makefile: Remove '--gcc-toolchain' flag") provides
some background about --gcc-toolchain. Normally clang finds on its own
the additional utilities and libraries that it needs (for example GNU ld
or glibc). On some systems however, this autodetection doesn't work.
There, our only recourse is asking GCC directly, and pass the result to
--sysroot and --gcc-toolchain. Of course that only works when a cross
GCC is available.

Autodetection worked fine on Debian, but to use the aarch64-linux-gnu
toolchain from Archlinux I needed both --sysroot (for crt1.o) and
--gcc-toolchain (for crtbegin.o, -lgcc). The --prefix parameter wasn't
needed there, but it might be useful on other distributions.

Use the CLANG_CROSS_FLAGS variable instead of CLANG_FLAGS because it
allows tools such as bpftool, that need to build both host and target
binaries, to easily filter out the cross-build flags from CFLAGS.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-2-jean-philippe@linaro.org
2021-12-16 12:15:04 -08:00
Hans de Goede
68b9bcc8a5 media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
Some sensors come with a variable-focus lens where the lens focus is
controller by a VCM (Voice Coil Motor). If there is a VCM for the
lens-focus, and if so which one, is described on the vcm_type field
of the ACPI SSDB table.

These VCMs are a second I2C device listed as an extra I2cSerialBusV2
resource in the same ACPI device as the sensor. The i2c-core-acpi.c
code only instantiates an i2c-client for the first I2cSerialBusV2
resource.

Add support for instantiating an i2c-client for the VCM with
the type of the i2c-client set based on the SSDB vcm_type field.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-12-16 20:58:56 +01:00
Hans de Goede
fc2c204538 media: ipu3-cio2: Call cio2_bridge_init() before anything else
Since cio2_bridge_init() may now return -EPROBE_DEFER it is best to
call it before anything else.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-12-16 20:57:58 +01:00
Hans de Goede
ae971ccae9 media: ipu3-cio2: Defer probing until the PMIC is fully setup
On devices where things are not fully describe in devicetree (1)
and where the code thus falls back to calling cio2_bridge_init(),
the i2c-clients for any VCMs also need to be instantiated manually.

The VCM can be probed by its driver as soon as the code instantiates
the i2c-client and this probing must not happen before the PMIC is
fully setup.

Make cio2_bridge_init() return -EPROBE_DEFER when the PMIC is not
fully-setup, deferring the probe of the ipu3-cio2 driver.

This is a preparation patch for adding VCM enumeration support to
the ipu3-cio2-bridge code.

1) Through embedding of devicetree info in the ACPI tables

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-12-16 20:57:21 +01:00
Jernej Skrabec
86790a4fdf media: hantro: Add support for Allwinner H6
Allwinner H6 has a Hantro G2 core used for VP9 decoding. It's not clear
at this time if HEVC is also supported or not.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:55 +01:00
Jernej Skrabec
fd6be12716 media: dt-bindings: allwinner: document H6 Hantro G2 binding
Allwinner H6 contains older Hantro G2 core, primarly used for VP9 video
decoding. It's unclear for now if HEVC is also supported.

Describe its binding.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:54 +01:00
Jernej Skrabec
3385c514ec media: hantro: Convert imx8m_vpu_g2_irq to helper
It turns out that imx8m_vpu_g2_irq() doesn't depend on any platform
specifics and can be used with other G2 platform drivers too.

Move it to common code.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:54 +01:00
Jernej Skrabec
3c5b218c36 media: hantro: move postproc enablement for old cores
Older G2 cores, like that in Allwinner H6, seem to have issue with
latching postproc register values if this is first thing done in job.
Moving that to the end solves the issue.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:54 +01:00
Jernej Skrabec
6a7c321957 media: hantro: vp9: add support for legacy register set
Some older G2 cores uses slightly different register set for HEVC and
VP9. Since vast majority of registers and logic is the same, it doesn't
make sense to introduce another drivers.

Add legacy_regs quirk and implement only VP9 changes for now. HEVC
changes will be introduced later, if needed.

Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:54 +01:00
Jernej Skrabec
e67a09d199 media: hantro: vp9: use double buffering if needed
Some G2 variants need double buffering to be enabled in order to work
correctly, like that found in Allwinner H6 SoC.

Add platform quirk for that.

Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:54 +01:00
Jernej Skrabec
ea71631b71 media: hantro: add support for reset lines
Some SoCs like Allwinner H6 use reset lines for resetting Hantro G2. Add
support for them.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:53 +01:00
Jernej Skrabec
37af43b250 media: hantro: Fix probe func error path
If clocks for some reason couldn't be enabled, probe function returns
immediately, without disabling PM. This obviously leaves PM ref counters
unbalanced.

Fix that by jumping to appropriate error path, so effects of PM functions
are reversed.

Fixes: 775fec6900 ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:53 +01:00
Martin Kepplinger
69a187456d media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
In cases like this when controlling regulators and clocks the suspend()
and resume() functions are meant to be called balanced toggling the behaviour.

It's wrong to use the same suspend function for runtime and system suspend
in this case and leads to errors like

[   77.718890] Failed to disable vddd: -EIO

Use pm_runtime_force_* helpers in order to support system suspend properly
when runtime pm is already implemented and fix this.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:53 +01:00
Martin Kepplinger
e1cc0a0553 media: i2c: hi846: check return value of regulator_bulk_disable()
regulator_bulk_disable can fail and thus suspend() can. Handle that error
gracefully.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:53 +01:00
Bingbu Cao
d1d2ed5925 media: hi556: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.

Also do identification on the first access of the device, whether in probe
or when starting streaming.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Kao, Arec <arec.kao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:53 +01:00
Bingbu Cao
5525fd86ef media: ov5675: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.

Also do identification on the first access of the device, whether in probe
or when starting streaming.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:52 +01:00
Bingbu Cao
56ca3be85f media: imx208: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.

Also do identification on the first access of the device, whether in probe
or when starting streaming.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:52 +01:00
Bingbu Cao
ada2c4f54d media: ov2740: support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.

Also do identification on the first access of the device, whether in probe
or when starting streaming.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:52 +01:00
Sakari Ailus
1e583b56e5 media: ov5670: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.

Also do identification on the first access of the device, whether in probe
or when starting streaming.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:52 +01:00
Bingbu Cao
0e014f1a8d media: ov8856: support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.

Also do identification on the first access of the device, whether in probe
or when starting streaming.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:52 +01:00
Sakari Ailus
cbe0b3af73 media: ov8865: Disable only enabled regulators on error path
If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.

Fix this by disabling only clocks and regulators that were enabled
previously.

Fixes: 11c0d8fdcc ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:52 +01:00
Jean-Michel Hautbois
6ab7030039 media: staging: ipu3-imgu: add the AWB memory layout
While parsing the RAW AWB metadata, the AWB layout was missing to fully
understand which byte corresponds to which feature. Make the field names
and usage explicit, as it is used by the userspace applications.

[Sakari Ailus: Changed wording of sat_ratio field as per review comments,
	       fixed a whitespace issue.]

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:52 +01:00
Sakari Ailus
5fcec420cc media: Update Intel-submitted camera sensor driver contacts
Hyungwoo's e-mail no longer works so I presume he's left the company. Drop
Hyungwoo as maintainer on ov5670 driver and remove his e-mail from other
sensor drivers.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-16 20:54:51 +01:00
Mauro Carvalho Chehab
3a956f0b12 Signed tag for the immutable platform-drivers-x86-int3472 branch
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
 and INT3472 driver patches.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmG6YLQUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zwGwf8Csb4wXyc3duBlnX/9jO9REDVKTN9
 HhmU2KQm29g10dN2nlFXEOG16xAy8zt3BE7QwniL/R5sUsKTCAEugY8Aqq/4+lFA
 vTU+YR9YqZFmEDGMfDngHeh9ZvSWIJS7IEXthxCkgGVhrd2Wl50jKTjVyq1RIDKv
 a7B4fOhguFv95xRlnXK+yoVUU7zZPWAgxyCqV0E0JEi8aWE8Y483IRCzcDEyJeDa
 HkgZLVwD9l3WQ4uZllVg1q5jfSprHwBa8dFxgcd6mOOYaKowiJ+GjnvnXOto5X72
 zsODBJH15VzfVXF5cAqIvzN6nAFR8Mxieei+21iFyUD/Ps1vfWlodFHH2w==
 =Q1N9
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into media_tree

Signed tag for the immutable platform-drivers-x86-int3472 branch

This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.

* tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: int3472: Deal with probe ordering issues
  platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
  platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
  platform/x86: int3472: Add get_sensor_adev_and_name() helper
  platform/x86: int3472: Split into 2 drivers
  platform_data: Add linux/platform_data/tps68470.h file
  i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
  i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
  ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
2021-12-16 20:54:02 +01:00
Linus Torvalds
a52a8e9eaf A single fix for the clk framework that needed some more bake time in
linux-next. The problem is that two clks being registered at the same
 time can lead to a busted clk tree if the parent isn't fully registered
 by the time the child finds the parent. We rejigger the place where we
 mark the parent as fully registered so that the child can't find the
 parent until things are proper.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmG7kWERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVx+w//fOqrqTa7GmF8sJ8NCupsguITAOjwfZYr
 5Gifw9yRwTOUGpgPX2mrvFrOLhQTdnQ+WzPzve0WNa1IE/KmuxDrt2FaAhRZ6VKy
 w2Ix0xm2oJhECnvVFTUZSrRNSCKQbB1IBph0Zj8hJaFc02ZPftC1alTmSAW2hcAr
 dvx7PB+hhVIsmgJp//7CfXAR0rJI6cEiIpr5sOyoTNTV1Rp0KK0ZqgLuyq1ibUj8
 JEyi1OZsKN/+sXV4xaTGK8ECLwhx16KCKWYQYaUZfd7yL79hbRz3vwCFcEOAK6tg
 HG6MW1ZxaY4GT0dH06XVjBu2JmIeqbmFeXf4UWeIilctKflANikKZlWdkoJrOO2e
 t7aYIVxu1SOkv6WmskugrV5ZM4CmIjs7qGx5q73Iu0bUeXjY0bI3NazfBlVJmV9K
 fTIEex3zFfnjDWCkoloVnCHDjBTUjOJ6CKPWpTH7qlJlT8z3iv4rJWnmZzpIS5Kg
 4tP2xa+mMkmsluhhjGjQk4ofgaK53iQbik+cApdkmZSga/nJTo56cWnaKgUyONAR
 AcWi9QWwVwg0NeeSd8ZyUu+lGb4l+fv91DINeVv+04JmaCKggSdE64v+zrt2hE1n
 zZAHifaGfrebZe9w6Ugr0Ex/81E6Ev7ud8HGPw6MMZyoSScDESwXPHja/zJtnNns
 sClDnXFlJ3g=
 =UA+0
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
 "A single fix for the clk framework that needed some more bake time in
  linux-next.

  The problem is that two clks being registered at the same time can
  lead to a busted clk tree if the parent isn't fully registered by the
  time the child finds the parent. We rejigger the place where we mark
  the parent as fully registered so that the child can't find the parent
  until things are proper"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Don't parent clks until the parent is fully registered
2021-12-16 11:48:59 -08:00
Thomas Richter
a840974e96 perf test: Test 73 Sig_trap fails on s390
In Linux next commit 5504f67944 ("perf test sigtrap: Add basic
stress test for sigtrap handling") introduced the new test which uses
breakpoint events.  These events are not supported on s390 and PowerPC
and always fail:

  # perf test -F 73
  73: Sigtrap                                                         : FAILED!
  #

Fix it the same way as in the breakpoint tests in file
tests/bp_account.c where these type of tests are skipped on s390 and
PowerPC platforms.

With this patch skip this test on both platforms.

Output after:

  # perf test -F 73
  73: Sigtrap
  #

Fixes: 5504f67944 ("perf test sigtrap: Add basic stress test for sigtrap handling")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20211216151454.752066-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-16 16:21:15 -03:00
AngeloGioacchino Del Regno
8f62718bd0 clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver
Add support for the global clock controller found on MSM8956
and MSM8976 SoCs.
Since the multimedia clocks are actually in the GCC on these
SoCs, this will allow drivers to probe and control basically
all the required clocks.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211208091036.132334-3-marijn.suijten@somainline.org
2021-12-16 13:17:23 -06:00
Marijn Suijten
6d24d9546d dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller
Document the required properties and firmware clocks for gcc-msm8976 to
operate nominally, and add header definitions for referencing the clocks
from firmware.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211208091036.132334-2-marijn.suijten@somainline.org
2021-12-16 13:17:23 -06:00
Vinod Koul
db0c944ee9 clk: qcom: Add clock driver for SM8450
This adds Global Clock controller (GCC) driver for SM8450 SoC including
the gcc resets and gdsc.

This patch is based on initial code downstream by Vivek Aknurwar
<viveka@codeaurora.org>

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211207114003.100693-3-vkoul@kernel.org
2021-12-16 13:17:22 -06:00
Bjorn Andersson
fe5cf1c34f Merge tag '20211207114003.100693-2-vkoul@kernel.org' into clk-for-5.17
v5.16-rc1 + 20211207114003.100693-2-vkoul@kernel.org

The immutable branch contains the DT binding and clock defines as need
for the Qualcomm SM8450 global clock controller driver.
2021-12-16 13:17:22 -06:00
Vamsi Krishna Lanka
d79afa2013 clk: qcom: Add SDX65 GCC support
Add Global Clock Controller (GCC) support for SDX65 SoCs from Qualcomm.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/b5ea8a00d4e8418b57f4444d0b5243c1acc41808.1638861860.git.quic_vamslank@quicinc.com
2021-12-16 13:17:22 -06:00
Vamsi Krishna Lanka
d1b121d62b clk: qcom: Add LUCID_EVO PLL type for SDX65
Add a LUCID_EVO PLL type for SDX65 SoC from Qualcomm.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
[bjorn: Fixed indentation issues reported by checkpatch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/d582c3e291ae82aa488785eff36157653741f841.1638861860.git.quic_vamslank@quicinc.com
2021-12-16 13:17:22 -06:00
Bjorn Andersson
4ad3ce0070 Merge tag 'e15509b2b7c9b600ab38c5269d4fac609c077b5b.1638861860.git.quic_vamslank@quicinc.com' into clk-for-5.17
v5.16-rc1 + e15509b2b7c9b600ab38c5269d4fac609c077b5b.1638861860.git.quic_vamslank@quicinc.com

Merge the immutable branch containing the DT binding and clock
definitions needed for the SDX65 global clock controller driver.
2021-12-16 13:17:22 -06:00
Alex Deucher
0cd7f378b0 drm/amdgpu: add support for IP discovery gc_info table v2
Used on gfx9 based systems. Fixes incorrect CU counts reported
in the kernel log.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1833
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-16 14:08:20 -05:00
Jiapeng Chong
799dce6fbd drm/amd/display: Fix warning comparing pointer to 0
Fix the following coccicheck warning:

./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c:744:35-36:
WARNING comparing pointer to 0.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-16 14:08:20 -05:00
Alex Deucher
109a357f28 drm/amdgpu: clean up some leftovers from bring up
Some old registers leftover from pre-silicon.  No longer
relevant on real hardware.  Remove.

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-16 14:08:20 -05:00
Victor Skvortsov
892deb4826 drm/amdgpu: Separate vf2pf work item init from virt data exchange
We want to be able to call virt data exchange conditionally
after gmc sw init to reserve bad pages as early as possible.
Since this is a conditional call, we will need
to call it again unconditionally later in the init sequence.

Refactor the data exchange function so it can be
called multiple times without re-initializing the work item.

v2: Cleaned up the code. Kept the original call to init_exchange_data()
inside early init to initialize the work item, afterwards call
exchange_data() when needed.

Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed By: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-16 14:08:20 -05:00
Changcheng Deng
d999bc81ac drm/amdkfd: use max() and min() to make code cleaner
Use max() and min() in order to make code cleaner.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-16 14:08:20 -05:00
chen gong
d4c2933fb8 drm/amdgpu: When the VCN(1.0) block is suspended, powergating is explicitly enabled
Play a video on the raven (or PCO, raven2) platform, and then do the S3
test. When resume, the following error will be reported:

amdgpu 0000:02:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring
vcn_dec test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block
<vcn_v1_0> failed -110
amdgpu 0000:02:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110

[why]
When playing the video: The power state flag of the vcn block is set to
POWER_STATE_ON.

When doing suspend: There is no change to the power state flag of the
vcn block, it is still POWER_STATE_ON.

When doing resume: Need to open the power gate of the vcn block and set
the power state flag of the VCN block to POWER_STATE_ON.
But at this time, the power state flag of the vcn block is already
POWER_STATE_ON. The power status flag check in the "8f2cdef drm/amd/pm:
avoid duplicate powergate/ungate setting" patch will return the
amdgpu_dpm_set_powergating_by_smu function directly.
As a result, the gate of the power was not opened, causing the
subsequent ring test to fail.

[how]
In the suspend function of the vcn block, explicitly change the power
state flag of the vcn block to POWER_STATE_OFF.

BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-16 14:08:10 -05:00
Alexander Gordeev
4c88bb96e4 s390/mm: check 2KB-fragment page on release
When CONFIG_DEBUG_VM is defined check that pending remove
and tracking nibbles (bits 31-24 of the page refcount) are
cleared. Should the earlier stages of the page lifespan
have a race or logical error, such check could help in
exposing the issue.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-16 19:58:08 +01:00
Alexander Gordeev
1194372db6 s390/mm: better annotate 2KB pagetable fragments handling
Explicitly encode immediate value of pending remove nibble
(bits 31-28) and tracking nibble (bits 27-24) of the page
refcount whenever these nibbles are tested or changed, for
better readability. Also, add some comments describing how
the fragments are handled.

Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-16 19:58:08 +01:00
Alexander Gordeev
c2c224932f s390/mm: fix 2KB pgtable release race
There is a race on concurrent 2KB-pgtables release paths when
both upper and lower halves of the containing parent page are
freed, one via page_table_free_rcu() + __tlb_remove_table(),
and the other via page_table_free(). The race might lead to a
corruption as result of remove of list item in page_table_free()
concurrently with __free_page() in __tlb_remove_table().

Let's assume first the lower and next the upper 2KB-pgtables are
freed from a page. Since both halves of the page are allocated
the tracking byte (bits 24-31 of the page _refcount) has value
of 0x03 initially:

CPU0				CPU1
----				----

page_table_free_rcu() // lower half
{
	// _refcount[31..24] == 0x03
	...
	atomic_xor_bits(&page->_refcount,
			0x11U << (0 + 24));
	// _refcount[31..24] <= 0x12
	...
	table = table | (1U << 0);
	tlb_remove_table(tlb, table);
}
...
__tlb_remove_table()
{
	// _refcount[31..24] == 0x12
	mask = _table & 3;
	// mask <= 0x01
	...

				page_table_free() // upper half
				{
					// _refcount[31..24] == 0x12
					...
					atomic_xor_bits(
						&page->_refcount,
						1U << (1 + 24));
					// _refcount[31..24] <= 0x10
					// mask <= 0x10
					...
	atomic_xor_bits(&page->_refcount,
			mask << (4 + 24));
	// _refcount[31..24] <= 0x00
	// mask <= 0x00
	...
	if (mask != 0) // == false
		break;
	fallthrough;
	...
					if (mask & 3) // == false
						...
					else
	__free_page(page);			list_del(&page->lru);
	^^^^^^^^^^^^^^^^^^	RACE!		^^^^^^^^^^^^^^^^^^^^^
}					...
				}

The problem is page_table_free() releases the page as result of
lower nibble unset and __tlb_remove_table() observing zero too
early. With this update page_table_free() will use the similar
logic as page_table_free_rcu() + __tlb_remove_table(), and mark
the fragment as pending for removal in the upper nibble until
after the list_del().

In other words, the parent page is considered as unreferenced and
safe to release only when the lower nibble is cleared already and
unsetting a bit in upper nibble results in that nibble turned zero.

Cc: stable@vger.kernel.org
Suggested-by: Vlastimil Babka <vbabka@suse.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-16 19:58:08 +01:00