"fsl,imx-ckih2" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckih1" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckil" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-osc" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-osc" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-clk32" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The nxp,imx7-mipi-csi2.yaml binding requires ports to be grouped in a
ports node, as multiple ports are present. Fix imx7s.dtsi and the only
board file that references the mipi_csi ports.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reset-names property isn't defined by the nxp,imx7-mipi-csi2.yaml
binding, and isn't used by the corresponding driver as it acquires the
reset with a NULL ID. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The fsl,csis-hs-settle property isn't defined by the
nxp,imx7-mipi-csi2.yaml binding, and isn't parsed by the corresponding
driver. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With the updated dt-bindings for the spba-bus, rename spba@xxxx
to spba-bus@xxxx. There are no functional changes.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add binding doc for fsl,spba-bus.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document continuous Burst Clock option. With this option Burst Clock, if
enabled, will output continuous clock, otherwise Burst Clock will output
clock only when necessary.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently, the driver ignores the user's priority for flow steering
rules in FDB namespace. Change it and create the rule in the right
priority.
It will allow to create FDB steering rules in up to 16 different
priorities.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Have all the namespace type check in the same switch case.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This patch doesn't add an additional namespaces, but just separates the
naming to be used by each FDB user, bypass and kernel.
Downstream patches will actually split this up and allow to have more
than single priority for the bypass users.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add a struct_group() for the algs so that memset() can correctly reason
about the size.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211118203712.1288866-1-keescook@chromium.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
zero_copy_allocator has been removed back when Bjorn Topel introduced
xsk_buff_pool. Remove references to it that were dangling in the tree.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20211210171511.11574-1-maciej.fijalkowski@intel.com
At the reset hook, call __drm_atomic_helper_plane_reset which is
called at the initialization of the plane and sets the default value of
rotation on all planes to DRM_MODE_ROTATE_0 which is equal to 1.
Tested on Jacuzzi (MTK).
Resolves IGT@kms_properties@plane-properties-{legacy,atomic}
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYbdvvAAKCRAfOrpwrNPN
DBVFAP9n8QGFvjmhgc5MjMp7cfYziVlRTXW16rejmVHXZIGMOgD/dTj3jffyVGQK
+n9vhUqa+apnVjufzwvy0RpMzRc+iwY=
=8QU6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aUEQ
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT #1 for 5.17:
- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit
* tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: Add QSPI0 node
ARM: dts: at91: sama7g5: Add QSPI nodes
ARM: dts: at91: sama5d2: Name the qspi clock
ARM: dts: at91: add Microchip EVB-KSZ9477 board
ARM: dts: at91: sama5d2_xplained: remove PA11__SDMMC0_VDDSEL from pinctrl
ARM: dts: at91: update alternate function of signal PD20
Link: https://lore.kernel.org/r/20211213161451.90786-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the remoteprocs found on the SoC and add a qcom,rmtfs-mem node.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-9-luca.weiss@fairphone.com
- helios64: hdd-power, pcie, 2.5GbE nic
- spi for rk356x and on the Quartz-A board
- headphone, bluetooth support on Rock Pi4
And some misc soc improvements:
- missing dsi compatible on px30
- pwm pinctrl name on rk356x
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmG3IO8QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQBQB/0cZ22l3mIAxiFdk0ZJ9jojuZiCXz4A2AUc
WYY8J2m5F+3jGJ50FuXLHw+WZKUqMHs5g0ISmmmqUjnU1nQPcJbpzcj4QkfRmlRJ
GNaMX4K5fxxsW2HQ/e0M5CWSQ5IYbEsEWAnlrW+LYzL+f5Mlwf13SI+kSZdLoZdP
4ZIPfVWovzIdiNlPuqht5tMB7pHvOC5UPIDMbNs8DamOF0VIppRgDODsgpZQ1wkq
D/x5g5dQBh8PGDl758hNSy5uU2fHS2Ghn8ooeGjakax8XhHTfUYEieCp5JI4fr7Y
X336aXG34TGpKivVtowcj+LtGZ+w2A56ZjBsWwxYkh/2GfzPJiRK
=37E1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Qxh/
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Improvements on a number of boards:
- helios64: hdd-power, pcie, 2.5GbE nic
- spi for rk356x and on the Quartz-A board
- headphone, bluetooth support on Rock Pi4
And some misc soc improvements:
- missing dsi compatible on px30
- pwm pinctrl name on rk356x
* tag 'v5.17-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards
arm64: dts: rockchip: Add missing secondary compatible for PX30 DSI
arm64: dts: rockchip: Add spi1 pins on Quartz64 A
arm64: dts: rockchip: Add spi nodes on rk356x
arm64: dts: rockchip: Change pwm pinctrl-name to "default" on rk356x
arm64: dts: rockchip: Enable HDD power on helios64
arm64: dts: rockchip: add variables for pcie completion to helios64
arm64: dts: rockchip: define usb hub and 2.5GbE nic on helios64
arm64: dts: rockchip: add interrupt and headphone-detection for Rock Pi4's audio codec
Link: https://lore.kernel.org/r/3637342.7akbv5NDAT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the required nodes for booting the CDSP on sm6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-8-luca.weiss@fairphone.com
Add the required nodes for booting the ADSP on sm6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-6-luca.weiss@fairphone.com
Add the required nodes for booting the MPSS on sm6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-4-luca.weiss@fairphone.com
Add a config for the CDSP present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-7-luca.weiss@fairphone.com
Add a config for the ADSP present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-5-luca.weiss@fairphone.com
Add a config for the MPSS present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-3-luca.weiss@fairphone.com
Add compatibles for the remoteprocs found in SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-2-luca.weiss@fairphone.com
ENABLE_M4 should be set to 1 when loading code to TCM, otherwise
you will not able to replace the firmware after you stop m4.
Besides ENABLE_M4, we still need set SW_M4C_RST, because this bit
will be automatically set with SW_M4C_NON_SCLR_RST set.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210602064206.27004-1-peng.fan@oss.nxp.com
Sort clocks and interrupts as specified in the docs and remove the stray
property #power-domain-cells from aoss_qmp to solve dtbs_check
validation errors.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082614.22651-11-luca.weiss@fairphone.com
The DragonBoard 410c is mainly supported by the ARM64 architecture
and defconfig, but it can also run well on the ARM32 architecture.
Add the necessary options to the multi_v7_defconfig to simplify
building an ARM32 kernel for DragonBoard 410c.
This is also a possible opportunity to slightly increase CI coverage
for older Qualcomm-based ARM32 platforms that are currently not
represented well in automated CI setups. The APQ8016 SoC used in DB410c
is still quite similar to those. DB410c is already used in some CI systems
so the same hardware could be re-used to get some basic ARM32 boot testing.
When deciding between built-in (y) and module (m), I usually used the
same that is already being used (and functional) in the ARM64 defconfig.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
The DragonBoard 410c is a convenient device for testing and debugging.
Since there is support for using ARM32 kernels on MSM8916 now, also
build the DB410c DTB on ARM32 so it can be used for testing. ARM64
is still the main supported architecture for DB410c but it actually
works great on ARM32 as well.
The "apq8016-sbc.dts" is simply included as-is from ARM64 similar
to the approach used for Raspberry Pi (e.g. bcm2711-rpi-4-b.dts).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-1-stephan@gerhold.net
- Separate DTs for all t8103 platforms
- Add i2c and cd321x nodes
- Bindings for apple,wdt
- PMGR bindings and DT updates to instantiate it
- WiFi MAC address DT handling
This also includes the MAINTAINERS change for the PMGR driver itself, to
avoid merge issues; the driver will be sent in a different pull.
Manual fixups: Added i2c power domain references to the PMGR DT commit,
since a prior commit added the i2c nodes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYa7mWAAKCRClhN6SrnTN
2OcWAP0SeheFWsBVf4H2ePIrHQ87NzCYi9Nb35SSSgBFVRsGXgEAu+H8kTbUMVVh
kPJyeAwtuksqf2W5t45ziIWz+W4k5wI=
=Wxou
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QggY
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux into arm/dt
Apple SoC DT updates for 5.17:
- Separate DTs for all t8103 platforms
- Add i2c and cd321x nodes
- Bindings for apple,wdt
- PMGR bindings and DT updates to instantiate it
- WiFi MAC address DT handling
This also includes the MAINTAINERS change for the PMGR driver itself, to
avoid merge issues; the driver will be sent in a different pull.
Manual fixups: Added i2c power domain references to the PMGR DT commit,
since a prior commit added the i2c nodes.
* tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8103: Expose PCI node for the WiFi MAC address
arm64: dts: apple: t8103: Add UART2
arm64: dts: apple: t8103: Add PMGR nodes
dt-bindings: arm: apple: Add apple,pmgr binding
dt-bindings: power: Add apple,pmgr-pwrstate binding
MAINTAINERS: Add PMGR power state files to ARM/APPLE MACHINE
dt-bindings: watchdog: Add Apple Watchdog
dt-bindings: interrupt-controller: apple,aic: Add power-domains property
dt-bindings: pinctrl: apple,pinctrl: Add power-domains property
dt-bindings: iommu: apple,dart: Add power-domains property
dt-bindings: i2c: apple,i2c: Add power-domains property
arm64: dts: apple: t8103: Add cd321x nodes
arm64: dts: apple: t8103: Add i2c nodes
arm64: dts: apple: Add missing M1 (t8103) devices
dt-bindings: arm: apple: Add iMac (24-inch 2021) to Apple bindings
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: dts: apple: change ethernet0 device type to ethernet
Link: https://lore.kernel.org/r/e18b476c-7b1f-de73-53a2-0e21fb5cd283@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Steven Maddox reported in the OpenWrt bugzilla, that his
RaidSonic IB-NAS4220-B was no longer booting with the new
OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was
working with the previous OpenWrt 19.07 series (uses 4.14).
|[ 5.548038] No RedBoot partition table detected in 30000000.flash
|[ 5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0
|[ 5.739093] No RedBoot partition table detected in 30000000.flash
|...
|[ 7.039504] Waiting for root device /dev/mtdblock3...
The provided bootlog shows that the RedBoot partition parser was
looking for the partition table "at offset 0x0". Which is strange
since the comment in the device-tree says it should be at 0xfe0000.
Further digging on the internet led to a review site that took
some useful PCB pictures of their review unit back in February 2009.
Their picture shows a Spansion S29GL128N11TFI01 flash chip.
>From Spansion's Datasheet:
"S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors"
Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his
unit: "131072".
With the 128 KiB Sector/Erasesize in mind. This patch changes the
fis-index-block property to (0xfe0000 / 0x20000) = 0x7f.
Fixes: b5a923f8c7 ("ARM: dts: gemini: Switch to redboot partition parsing")
Reported-by: Steven Maddox <s.maddox@lantizia.me.uk>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Steven Maddox <s.maddox@lantizia.me.uk>
Link: https://lore.kernel.org/r/20211206004334.4169408-1-linus.walleij@linaro.org'
Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The apq8016-sbc-sndcard is designed to be used with the LPASS drivers
(bypassing the combined audio/modem DSP in MSM8916/APQ8016).
Make it possible to use QDSP6 audio instead for the msm8916-qdsp6-sndcard.
This only requires adding some additional hooks that set up the DPCM
backends correctly. Similar code is already used in drivers for newer
SoCs such as apq8096.c, sdm845.c and sm8250.c.
A slightly different initialization sequence is used for the apq8016-sbc
and msm8916-qdsp6 sound card by defining the apq8016_sbc_add_ops()
function as device match data.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211202145505.58852-6-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two possible audio setups on MSM8916/APQ8016: Normally the audio
is routed through the audio/modem DSP (covered by the qdsp6 driver). During
upstreaming for the DragonBoard 410c it was decided to bypass it and
instead talk directly to the audio controller using the "lpass" driver.
Bypassing the DSP gives more control about the audio configuration but limits
the functionality: For example, routing audio through the audio/modem DSP is
strictly required for voice call audio. Also, without the special changes in
the DB410c firmware other MSM8916 devices can only use the bypass as long as
the modem DSP is not started. Otherwise, the firmware will assume control of
the LPASS hardware block and audio is no longer functional.
Add support for using the DSP audio setup instead using a new
"qcom,msm8916-qdsp6-sndcard" compatible. It is basically a mixture of
the apq8016-sbc-sndcard and the newer sm8250-sndcard, which uses
indirect QDSP6 DAI links instead of the direct LPASS DAI links.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-5-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
All the Qualcomm sound card drivers use the same common device tree
parsing code, so the allowed device tree nodes are almost the same
for all of them. Convert the qcom,apq8016-sbc-sndcard documentation
to a DT schema by adding it to the existing qcom,sm8250 schema.
The only speciality of qcom,apq8016-sbc-sndcard is that it has memory
resources for setting up an I/O mux. This can be handled using
a conditional if statement that only requires it for the apq8016-sbc
compatible.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-4-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The sm8250 audio driver uses the common Qualcomm device tree parser and
therefore already supports the "aux-devs" property that allows adding
additional auxiliary devices to the sound card (e.g. analog speaker
amplifiers that can be connected using "audio-routing").
Document the property in the DT schema for sm8250 as well. The description
is taken from simple-card.yaml which has a very similar property.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The MultiMedia audio routes can be deduced from other parts of the
device tree (e.g. the definitions of the MultiMedia DAIs) and therefore
specifying them again in "audio-routing" is redundant and prone to
mistakes. This is no longer necessary since commit 6fd8d2d275
("ASoC: qcom: qdsp6: Move frontend AIFs to q6asm-dai").
Let's drop them from the example in the DT schema as well
to avoid confusion.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Misc bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGxGLEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpPWsIALBdp+6ZQEzQXOpqiHGqDenaXZkUkcdzjvgC
2jtbxHu9+iZOmzLgtrKK6T9ky7gewucqhax80lvN+5wzZK/siVtmidJCi+f8MihN
g2ePnOk5LC3KAetCNBMYlRlrLQuH8raLuec3CroJLIfmZEx2rPNbp/CmXfj7BBlc
XcEjP3pvsJehVY7Em/EbTOQhln/fOzHXjimqM7vx+CJQ7Vuvwwm60UvlpwJhPaVk
c8n4rYrddYQaLPpQvedhO3xGQ1fHSx94iA4QmMRB9Q6oeNPJ+I9eQsm+na8cAnga
WePmcJqIiB9NnE67otr8Z2nOboX9x79DgVxCNzwuclH6qoVzJeM=
=jIiu
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Misc virtio and vdpa bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: Consider device id larger than 31
virtio/vsock: fix the transport to work with VMADDR_CID_ANY
virtio_ring: Fix querying of maximum DMA mapping size for virtio device
virtio: always enter drivers/virtio/
vduse: check that offset is within bounds in get_config()
vdpa: check that offsets are within bounds
vduse: fix memory corruption in vduse_dev_ioctl()
I am seeing some crash logs which imply that we are trying to use
crashdumper hw to read back GPU state when the GPU isn't initialized.
This doesn't go well (for example, GPU could be in 32b address mode
and ignoring the upper bits of buffer that it is trying to dump state
to).
I'm not *quite* sure how we get into this state in the first place,
but lets not make a bad situation worse by triggering iova fault
crashes.
While we're at it, also add the information about whether the GPU is
initialized to the devcore dump to make this easier to see in the
logs (which makes the WARN_ON() redundant and even harmful because
it fills up the small bit of dmesg we get with the crash report).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211209193118.1163248-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since commit ad9a7f9644 ("libbpf: Improve logging around BPF program
loading"), libbpf_debug_print() gets an additional prog_name parameter
but doesn't pass it to printf(). Since the format string now expects two
arguments, printf() may read uninitialized data and segfault. Pass
prog_name through.
Fixes: ad9a7f9644 ("libbpf: Improve logging around BPF program loading")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211213183058.346066-1-jean-philippe@linaro.org
return value form directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>