Commit graph

1,105,074 commits

Author SHA1 Message Date
Linus Torvalds
c7fc51268b Two fixes for clock chip drivers:
- A regression fix for the Designware APB timer. A recent change to the
       error checking code transformed the error condition wrongly so it
       turned into a fail if good condition.
 
     - Fix a clang build fail of the ARM architected timer driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmG1yGETHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoeAdEADHWUKyLftD6dJR2Ntxx0Ekf2bT8YsT
 exVmKIfRpuTdmqp6XwCxulx3T3Ye2zUZhvKKyaKBLN9ELWopVuujs8twslCjzM03
 kTA8jOhcX4b34fXUf4fSUHRinVR5YxoPt8hiM4sekmrFamjV0yjUZr2zTuX9qPDY
 T5QMT7tNFK6FyM2Hl6CmUybt+/lN2jymMEcfWckL0R0EmYpZjU7fVfebgemJImto
 YJKFUgCslaOiVbTj3jxOrEx/NdQOE9cma9zAuHtRSaFFxz0rajafKHFpol1RXHH+
 8sb3v5XeNtPUgyX1vE+rf/1Y4O+yZufxL8eVKtODyGQHZMORm92bwOxCqAdiNFv8
 OFgiG7XcDnQBSI8CQwG/K/uLChFRGCTLv7ICpzuO20fKtIzsyCxV1zzaQlPzwFxl
 hzE1kvCQN/auAXBD1ghjzISfMwpj/hXp58d9dry8VoEI4ComUOVO0XbdnWXSm8eh
 j9PtYGMDWLftBCbbTA+//N2fxI5asdO552m08/+H1tgFK4VeJZxLwmagKyy84frh
 qcYlY7z99BysAwEwS1JqGO/RwSQ0CYZyHJzLkooPxRpgwOhF0wbPyjcUcnhEDYUM
 6rZW/SNNRwVRCESaK5bvU9IjH+UJ0pb3+dbwnRN8RIPfDuOU/n2KgMHE8fOgNxbF
 QjuW9tDuYXEdCQ==
 =6LIa
 -----END PGP SIGNATURE-----

Merge tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "Two fixes for clock chip drivers:

   - A regression fix for the Designware APB timer. A recent change to
     the error checking code transformed the error condition wrongly so
     it turned into a fail if good condition.

   - Fix a clang build fail of the ARM architected timer driver"

* tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic()
  clocksource/drivers/dw_apb_timer_of: Fix probe failure
2021-12-12 10:07:50 -08:00
Linus Torvalds
82d2ef4540 A set of interrupt chip driver fixes:
- Fix the multi vector MSI allocation on Armada 370XP.
 
  - Do interrupt acknowledgement correctly in the aspeed-scu driver.
 
  - Make the IPR register offset correct in the NVIC driver.
 
  - Make redistribution table flushing correct by issueing a SYNC command to
    ensure that the invalidation command has been executed.
 
  - Plug a device tree node reference leak in the bcm7210-l2 driver.
 
  - Trivial fixes in the MIPS GIC and the Apple AIC drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmG1xckTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoUoUEACeEOPsTeHUNkLZ6/P3bbEuaoJuW1bZ
 ALsN6WaxRwxfEH73gI/8HJA6PPLmnw68fiCo5uHnCOD6pzxh4Gt2dh3Z/W2GRSB2
 8rIOI0i3eeJz3mEc5VpBbboCDSUhat3fVFg+GK0JeuZDusTkiPUkCy5nMd5LzX7U
 7P+OEkcTzFqsKFI70zz/WjUaoBbQt4rWELz+fhDOXEoFQ9y2EtELEqtRCqe/6W/z
 daaPOmSWOyGCiF0xSM54D2kbeTgYYdmNvKbg13yY5oFtVPNJva6LMSLKUJ3UUKzH
 ZuDIxCvkx++EbgZZWFF5KgC5ETboFgY0yrJul4V9BX5od9sNLExElmmAnrBJsB2P
 /s3XuvPRx7533sCFfqLSWhJz3A58kQN0lD47Ky/Srz4S31ObVkqQZEJcoSOGvpU1
 frUViZ1nivF4dkSir2CV5IIMYBZHaZR2HlVrWsAxNYZf+9LYjEf2tI0Yri3BgsIX
 EtRGp/e255V61VQxr9wtVs4IpYKqsc67qFF/qvNxV68pZZdImBn0Ld4wZlbfTWAS
 0KpUcMh3SaZ3527zg5Ji5lOB+K0idgoBlQZlZ2J1N31FFCOBZtKRKEpGTHVR4x7q
 2mvEcdl0e4HEs1qYeSOSHvh7A6XvcJ/bk3v+WGwQnioG1IujGTKZH1aOPU/Kbxt2
 W5cljrptcwKt3w==
 =LOoe
 -----END PGP SIGNATURE-----

Merge tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of interrupt chip driver fixes:

   - Fix the multi vector MSI allocation on Armada 370XP

   - Do interrupt acknowledgement correctly in the aspeed-scu driver

   - Make the IPR register offset correct in the NVIC driver

   - Make redistribution table flushing correct by issueing a SYNC
     command to ensure that the invalidation command has been executed

   - Plug a device tree node reference leak in the bcm7210-l2 driver

   - Trivial fixes in the MIPS GIC and the Apple AIC drivers"

* tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node()
  irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL
  irqchip/apple-aic: Mark aic_init_smp() as __init
  irqchip: nvic: Fix offset for Interrupt Priority Offsets
  irqchip/mips-gic: Use bitfield helpers
  irqchip/aspeed-scu: Replace update_bits with write_bits.
  irqchip/armada-370-xp: Fix support for Multi-MSI interrupts
  irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()
2021-12-12 09:53:12 -08:00
Jerome Marchand
85bf17b28f recordmcount.pl: look for jgnop instruction as well as bcrl on s390
On s390, recordmcount.pl is looking for "bcrl 0,<xxx>" instructions in
the objdump -d outpout. However since binutils 2.37, objdump -d
display "jgnop <xxx>" for the same instruction. Update the
mcount_regex so that it accepts both.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211210093827.1623286-1-jmarchan@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-12 18:52:26 +01:00
Sven Schnelle
c9b12b59e2 s390/entry: fix duplicate tracking of irq nesting level
In the current code, when exiting from idle, rcu_irq_enter() is
called twice during irq entry:

irq_entry_enter()-> rcu_irq_enter()
irq_enter() -> rcu_irq_enter()

This may lead to wrong results from rcu_is_cpu_rrupt_from_idle()
because of a wrong dynticks nmi nesting count. Fix this by only
calling irq_enter_rcu().

Cc: <stable@vger.kernel.org> # 5.12+
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 56e62a7370 ("s390: convert to generic entry")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-12 18:52:26 +01:00
Linus Torvalds
773602256a A single fix for the x86 scheduler topology:
Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the
   scheduler towards the ATOM cluster as that has more total capacity.
   Use selection based on CPU priority instead.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmG1xxETHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoWhaEADFlr1l6QwIJs8Bv3Z9u/kkW1fPIoqP
 aFDrqLiQ/T+gBuS+d7R3YkRf1cICS+gbvv/dw8qx/v6gerUC71tEXxYxvOUqR7QL
 wX2zFNrhQqBaIKKGnbTHe47pB2+/AlpbXuQ2/j415AHxCxB4fOC1N4VKq0hTUyPu
 Ubz+QmOHcB0NhAf1jeN9DAlTJgQNbRW6oYYPJDsr+n+WjdlN3IZW/hCxLN1cvnNd
 NzsDEK1EeuccteoT5btzYy+XB31+WNrZ9afcJgG7goO/zmJfZ1lWAsyjKPocn6dC
 ozZSvHQhbgJIAwBaZJFyjZocgHTIkdFX6NzlpKaWw05tk984hJJ9pvg4KO5YeNx/
 tIehPnkmd9GwwO541+t3DhcbCPQIiKypRZKnXuczkjIuG3t2oD25b1EAqwhoPKGk
 TEX2o4DjixS3oKUP6khDteQkj8B0qOjeY18eGjBilJ764mRfbL+GRk/NoqVidrnt
 JWSCPEMM842Y8W7GYfZZZAypqDz9U0yRl+BCKpNDcx3Nr5OSbfkWC/LdvM3LlgIE
 /a2C6CXIZXgiifTF2PHOmv0O3/VPAtHXZ01ExzZu/MJP0hBUjLrxsj+TwILgociw
 WLVYnBgCf5XN1rMPmora8P5y+O/UpEYhXbmIFa6HQAQyfc0Ffiof4ZOl5VYf3mNh
 1GLB+ByEgCz4ig==
 =rr0v
 -----END PGP SIGNATURE-----

Merge tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler fix from Thomas Gleixner:
 "A single fix for the x86 scheduler topology:

  Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the
  scheduler towards the ATOM cluster as that has more total capacity.
  Use selection based on CPU priority instead"

* tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched,x86: Don't use cluster topology for x86 hybrid CPUs
2021-12-12 09:38:04 -08:00
Linus Torvalds
0f3d41e82d csky updates for 5.16-rc5
Only 1 fixup for csky:
  - fpu config macro
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEE2KAv+isbWR/viAKHAXH1GYaIxXsFAmG0fjcSHGd1b3JlbkBr
 ZXJuZWwub3JnAAoJEAFx9RmGiMV7MvAQAI9FNrhBJlK41rtMjzspKWQXYc0R7GRl
 acRUam/97uGKeiVlQcKaSfP07GDQCfcaXlaQ1tW4pgALDbXqaaOOh2DlsNaZKQ3h
 OoBJJ2WcH2+sE+YkZcxjBR2FuuAKRPfGAEbTiZ7rZjZqiQDGhjqwNqBcoz4/Ua90
 saOMoVxstVuALK1W6AZ2JmeSNXzA+aO7kM7O3pp2UgaYCJkh0nqDFJwIkXVhPhNz
 GhADqot1VRad51pa5xNd8KXXXic5lIUsk2qohrxZpluz1kjGFS3JAWSn4Mbj5hBk
 SfzT9FI188NXieh+Zm5lhFbxgOcaWCKUJut7yJOhsYY4YFnNB7lj+AFJj/l0GUfq
 Q1D4fww5GLLv9nKBBUVHF6dbXC3Z66J/5kJa/t1BOLQR7L7BUbd4bKbMlx/sigjm
 CxdS2YZVuDCmz4rSof4B1Y3TOjV6Olb0muawqHq+iSzZqMtB/+5sgMyD5LmEyigK
 5sJT6LZDbL7sdjh5YqU3rVtqsonO5o2hRfdAZaxtgodxCLZpeF4tUMHl2CSD7XKQ
 nhRZvZ7w4n7BY4zS+fyXfPAecVzfH0nIMdskDsZhwcnjxqGuRZbDd/ookXW7P3ID
 7g/fNVAOkxUbRE7MSO7RSOfh6lD4Y6zTrBx+YDj4ht1YDErTeLn4BCVWOb4LgjQs
 CR9Hbai5YUIS
 =g1GK
 -----END PGP SIGNATURE-----

Merge tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linux

Pull csky from Guo Ren:
 "Only one fix for csky: fix fpu config macro"

* tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linux:
  csky: fix typo of fpu config macro
2021-12-12 09:32:49 -08:00
Jonathan Cameron
1665a92f78 dt-bindings: iio: dac: adi,ad5755: drop unrelated included.
Probably a cut and paste error, but the binding header used in the
example is for the wrong device and nothing from it is used.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
2021-12-12 17:13:22 +00:00
Jonathan Cameron
a81c33f56a iio:adc/dac:Kconfig: Update to drop OF dependencies.
We could probably drop a lot more of these, but for now this removes
unnecessary restrictions on stand alone ADC devices.

For these 3 drivers the false dependency seems to date all
the way back to their initial introduction.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-12 17:13:18 +00:00
Jonathan Cameron
ade2be6d9b iio:adc:ti-ads124s08: Drop dependency on OF.
Nothing in this driver depends on OF firmware so drop the dependency
and update the headers to remove the false impression such a dependency
exists.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-12 17:13:14 +00:00
Jonathan Cameron
f346c96505 iio:adc:envelope-detector: Switch from of headers to mod_devicetable.h
There is nothing directly using of specific interfaces in this driver,
so lets not include the headers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-12 17:13:11 +00:00
Jonathan Cameron
3c3969a0c9 iio:adc:ti-adc12138: Switch to generic firmware properties and drop of_match_ptr
This enables using the driver with other firmware types such
as ACPI via PRP0001.

Also part of a general attempt to move IIO drivers over to generic
properties to avoid opportunities for cut and paste.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-12 17:13:07 +00:00
Jonathan Cameron
4efc1c614d iio:adc:mcp3911: Switch to generic firmware properties.
This allows use of the driver with other types of firmware such as ACPI
PRP0001 based probing.

Also part of a general attempt to remove direct use of of_ specific
accessors from IIO.

Added an include for mod_devicetable.h whilst here to cover the
struct of_device_id definition.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
2021-12-12 17:12:59 +00:00
Jonathan Cameron
c88eba5a18 iio:adc:max9611: Switch to generic firmware properties.
Note the handling of the device tree node in this driver was somewhat
unusual.  I have cleaned that up whilst also moving over to generic
properties.

Part of a general attempt to move all IIO drivers over to generic
firmware properties both as a general improvement and to avoid sources
of cut and paste into future drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-12 17:12:55 +00:00
Jonathan Cameron
fdb726c4f9 iio:light:cm3605: Switch to generic firmware properties.
This enables use of other firmware types with minimal driver changes.
Part of an ongoing effort to move all IIO drivers over to generic
accessors in order to reduce the chance of of_* versions being
copied into new drivers.  Also updated the headers to reflect this change
including using mod_devicetable.h for struct of_device_id definition
rather than going via of.h

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-12 17:12:50 +00:00
Jonathan Cameron
92311717b3 iio:pot:mcp41010: Switch to generic firmware properties.
In this case it was only of_device_get_match_data() + header update.
This enables use of other firmware types with no other changes, such
as ACPI via the PRP0001 route.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Chris Coffey <cmc@babblebit.net>
2021-12-12 17:12:47 +00:00
Jonathan Cameron
09a74ea737 iio:dac:lpc18xx_dac: Swap from of* to mod_devicetable.h
This driver never used anything from the of specific headers.
mod_devicetable.h provides the struct of_device_id definition.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-12 17:12:43 +00:00
Jonathan Cameron
5669c086e6 iio:dac:dpot-dac: Swap of.h for mod_devicetable.h
This driver never used anything in the of specific header.
It just wants the struct of_device_id from mod_devicetable.h.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
2021-12-12 17:12:39 +00:00
Jonathan Cameron
f191fe4f0d iio:dac:ad5758: Drop unused of specific headers.
These have never been used in this driver.  What is used is in
mod_devicetable.h so add that include (struct of_device_id)

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Gomez <dagmcr@gmail.com>
2021-12-12 17:12:34 +00:00
Jonathan Cameron
3ac27afefd iio:dac:ad5755: Switch to generic firmware properties and drop pdata
Lars pointed out that platform data can also be supported via the
generic properties interface, so there is no point in continuing to
support it separately.  Hence squish the linux/platform_data/ad5755.h
header into the c file and drop accessing the platform data directly.

Done by inspection only.  Mostly completely mechanical with the
exception of a few places where default value handling is
cleaner done by first setting the value, then calling the
firmware reading function but and not checking the return value,
as opposed to reading firmware then setting the default if an error
occurs.

Part of general attempt to move all of IIO over to generic
device properties, both to enable other firmware types and
to remove drivers that can be the source of of_ specific
behaviour in new drivers.

Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-12 17:12:28 +00:00
Jonathan Cameron
9020ef6598 iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046
IIO triggers are software IRQ chips that split an incoming IRQ into
separate IRQs routed to all devices using the trigger.
When all consumers are done then a trigger callback reenable() is
called.  There are a few circumstances under which this can happen
in atomic context.

1) A single user of the trigger that calls the iio_trigger_done()
function from interrupt context.
2) A race between disconnecting the last device from a trigger and
the trigger itself sucessfully being disabled.

To avoid a resulting scheduling whilst atomic, close this second corner
by using schedule_work() to ensure the reenable is not done in atomic
context.

Note that drivers must be careful to manage the interaction of
set_state() and reenable() callbacks to ensure appropriate reference
counting if they are relying on the same hardware controls.

Deliberately taking this the slow path rather than via a fixes tree
because the error has hard to hit and I would like it to soak for a while
before hitting a release kernel.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211017172209.112387-1-jic23@kernel.org
2021-12-12 17:12:18 +00:00
Cosmin Tanislav
fea251b6a5 iio: addac: add AD74413R driver
The AD74412R and AD74413R are quad-channel, software configurable,
input/output solutions for building and process control applications.

They contain functionality for analog output, analog input, digital input,
resistance temperature detector, and thermocouple measurements integrated
into a single chip solution with an SPI interface.

The devices feature a 16-bit ADC and four configurable 13-bit DACs to
provide four configurable input/output channels and a suite of diagnostic
functions.

The AD74413R differentiates itself from the AD74412R by being
HART-compatible.

When configured with channel 0 as voltage output, channel 1 as current
output, channel 2 as voltage input and channel 3 as current input, the
following structure is created under the corresponding IIO device.

.
├── in_current0_offset
├── in_current0_raw
├── in_current0_sampling_frequency
├── in_current0_sampling_frequency_available
├── in_current0_scale
├── in_voltage1_offset
├── in_voltage1_raw
├── in_voltage1_sampling_frequency
├── in_voltage1_sampling_frequency_available
├── in_voltage1_scale
├── in_voltage2_offset
├── in_voltage2_raw
├── in_voltage2_sampling_frequency
├── in_voltage2_sampling_frequency_available
├── in_voltage2_scale
├── in_current3_offset
├── in_current3_raw
├── in_current3_sampling_frequency
├── in_current3_sampling_frequency_available
├── in_current3_scale
├── out_voltage0_raw
├── out_voltage0_scale
├── out_current1_raw
├── out_current1_scale
├── name
├── buffer
│   ├── data_available
│   ├── enable
│   ├── length
│   └── watermark
└── scan_elements
    ├── in_current0_en
    ├── in_current0_index
    ├── in_current0_type
    ├── in_voltage1_en
    ├── in_voltage1_index
    ├── in_voltage1_type
    ├── in_voltage2_en
    ├── in_voltage2_index
    ├── in_voltage2_type
    ├── in_current3_en
    ├── in_current3_index
    └── in_current3_type

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211205114045.173612-4-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-12 17:09:11 +00:00
Cosmin Tanislav
3cf3cdea6f dt-bindings: iio: add AD74413R
The AD74412R and AD74413R are quad-channel, software configurable,
input/output solutions for building and process control applications.

They contain functionality for analog output, analog input, digital input,
resistance temperature detector, and thermocouple measurements integrated
into a single chip solution with an SPI interface.

The devices feature a 16-bit ADC and four configurable 13-bit DACs to
provide four configurable input/output channels and a suite of diagnostic
functions.

The AD74413R differentiates itself from the AD74412R by being
HART-compatible.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211205114045.173612-3-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-12 17:09:11 +00:00
Cosmin Tanislav
b62e2e1763 iio: add addac subdirectory
For IIO devices that expose both ADC and DAC functionality.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20211205114045.173612-2-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-12 17:09:11 +00:00
Cai Huoqing
d4b572f835 MAINTAINERS: Update i.MX 8QXP ADC info
Update my email address to use developer mail address,
because the old address will be dropped soon.

And change the status from 'Supported' to 'Maintained' for me
to look after this code without any payment now.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211201083100.1587-1-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-12 17:09:11 +00:00
Antoniu Miclaus
2ff1f4d8df dt-bindings:iio:dac: add ad7293 doc
Add device tree bindings for the AD7293 Power Amplifier.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202150819.24832-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-12 17:08:54 +00:00
David Ahern
28a2686c18 selftests: Fix IPv6 address bind tests
IPv6 allows binding a socket to a device then binding to an address
not on the device (__inet6_bind -> ipv6_chk_addr with strict flag
not set). Update the bind tests to reflect legacy behavior.

Fixes: 34d0302ab8 ("selftests: Add ipv6 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 16:24:27 +00:00
David Ahern
0f108ae445 selftests: Fix raw socket bind tests with VRF
Commit referenced below added negative socket bind tests for VRF. The
socket binds should fail since the address to bind to is in a VRF yet
the socket is not bound to the VRF or a device within it. Update the
expected return code to check for 1 (bind failure) so the test passes
when the bind fails as expected. Add a 'show_hint' comment to explain
why the bind is expected to fail.

Fixes: 75b2b2b3db ("selftests: Add ipv4 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 16:24:27 +00:00
David Ahern
7e0147592b selftests: Add duplicate config only for MD5 VRF tests
Commit referenced below added configuration in the default VRF that
duplicates a VRF to check MD5 passwords are properly used and fail
when expected. That config should not be added all the time as it
can cause tests to pass that should not (by matching on default VRF
setup when it should not). Move the duplicate setup to a function
that is only called for the MD5 tests and add a cleanup function
to remove it after the MD5 tests.

Fixes: 5cad8bce26 ("fcnal-test: Add TCP MD5 tests for VRF")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 16:24:27 +00:00
David S. Miller
8f2fd39355 Merge branch 'hns3-fixes'
Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 16:20:50 +00:00
Yufeng Mo
6dde452bce net: hns3: fix race condition in debugfs
When multiple threads concurrently access the debugfs content, data
and pointer exceptions may occur. Therefore, mutex lock protection is
added for debugfs.

Fixes: 5e69ea7ee2 ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 16:20:50 +00:00
Jie Wang
27cbf64a76 net: hns3: fix use-after-free bug in hclgevf_send_mbx_msg
Currently, the hns3_remove function firstly uninstall client instance,
and then uninstall acceletion engine device. The netdevice is freed in
client instance uninstall process, but acceletion engine device uninstall
process still use it to trace runtime information. This causes a use after
free problem.

So fixes it by check the instance register state to avoid use after free.

Fixes: d8355240cf ("net: hns3: add trace event support for PF/VF mailbox")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 16:20:50 +00:00
Po-Hsu Lin
3748939bce selftests: icmp_redirect: pass xfail=0 to log_test()
If any sub-test in this icmp_redirect.sh is failing but not expected
to fail. The script will complain:
    ./icmp_redirect.sh: line 72: [: 1: unary operator expected

This is because when the sub-test is not expected to fail, we won't
pass any value for the xfail local variable in log_test() and thus
it's empty. Fix this by passing 0 as the 4th variable to log_test()
for non-xfail cases.

v2: added fixes tag

Fixes: 0a36a75c68 ("selftests: icmp_redirect: support expected failures")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:56:41 +00:00
David S. Miller
9b5bcb193a Merge branch 'dsa-tagger-storage'
Vladimir Oltean says:

====================
Replace DSA dp->priv with tagger-owned storage

Ansuel's recent work on qca8k register access over Ethernet:
https://patchwork.kernel.org/project/netdevbpf/cover/20211207145942.7444-1-ansuelsmth@gmail.com/
has triggered me to do something which I should've done for a longer
time:
https://patchwork.kernel.org/project/netdevbpf/patch/20211109095013.27829-7-martin.kaistra@linutronix.de/#24585521
which is to replace dp->priv with something that has less caveats.

The dp->priv was introduced when sja1105 needed to hold stateful
information in the tagging protocol driver. In that design, dp->priv
held memory allocated by the switch driver, because the tagging protocol
driver design was 100% stateless.

Some years have passed and others have started to feel the need for
stateful information kept by the tagger, as well as passing data back
and forth between the tagging protocol driver and the switch driver.
This isn't possible cleanly in DSA due to a circular dependency which
leads to broken module autoloading:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/

This patchset introduces a framework that resembles something normal,
which allows data to be passed from the tagging protocol driver (things
like switch management packets, which aren't intended for the network
stack) to the switch driver, while the tagging protocol still remains
more or less stateless. The overall design of the framework was
discussed with Ansuel too and it appears to be flexible enough to cover
the "register access over Ethernet" use case. Additionally, the existing
uses of dp->priv, which have mainly to do with PTP timestamping, have
also been migrated.

Changes in v2:
Fix transient build breakage in patch 5/11 due to a missing parenthesis,
https://patchwork.hopto.org/static/nipa/592567/12665213/build_clang/
and another transient build warning in patch 4/11 that for some reason
doesn't appear in my W=1 C=1 build.
https://patchwork.hopto.org/static/nipa/592567/12665209/build_clang/stderr
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:34 +00:00
Vladimir Oltean
4f3cb34364 net: dsa: remove dp->priv
All current in-tree uses of dp->priv have been replaced with
ds->tagger_data, which provides for a safer API especially when the
connection isn't the regular 1:1 link between one switch driver and one
tagging protocol driver, but could be either one switch to many taggers,
or many switches to one tagger.

Therefore, we can remove this unused pointer.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:34 +00:00
Vladimir Oltean
950a419d9d net: dsa: tag_sja1105: split sja1105_tagger_data into private and public sections
The sja1105 driver messes with the tagging protocol's state when PTP RX
timestamping is enabled/disabled. This is fundamentally necessary
because the tagger needs to know what to do when it receives a PTP
packet. If RX timestamping is enabled, then a metadata follow-up frame
is expected, and this holds the (partial) timestamp. So the tagger plays
hide-and-seek with the network stack until it also gets the metadata
frame, and then presents a single packet, the timestamped PTP packet.
But when RX timestamping isn't enabled, there is no metadata frame
expected, so the hide-and-seek game must be turned off and the packet
must be delivered right away to the network stack.

Considering this, we create a pseudo isolation by devising two tagger
methods callable by the switch: one to get the RX timestamping state,
and one to set it. Since we can't export symbols between the tagger and
the switch driver, these methods are exposed through function pointers.

After this change, the public portion of the sja1105_tagger_data
contains only function pointers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:34 +00:00
Vladimir Oltean
fcbf979a5b Revert "net: dsa: move sja1110_process_meta_tstamp inside the tagging protocol driver"
This reverts commit 6d709cadfd.

The above change was done to avoid calling symbols exported by the
switch driver from the tagging protocol driver.

With the tagger-owned storage model, we have a new option on our hands,
and that is for the switch driver to provide a data consumer handler in
the form of a function pointer inside the ->connect_tag_protocol()
method. Having a function pointer avoids the problems of the exported
symbols approach.

By creating a handler for metadata frames holding TX timestamps on
SJA1110, we are able to eliminate an skb queue from the tagger data, and
replace it with a simple, and stateless, function pointer. This skb
queue is now handled exclusively by sja1105_ptp.c, which makes the code
easier to follow, as it used to be before the reverted patch.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:34 +00:00
Vladimir Oltean
c79e84866d net: dsa: tag_sja1105: convert to tagger-owned data
Currently, struct sja1105_tagger_data is a part of struct
sja1105_private, and is used by the sja1105 driver to populate dp->priv.

With the movement towards tagger-owned storage, the sja1105 driver
should not be the owner of this memory.

This change implements the connection between the sja1105 switch driver
and its tagging protocol, which means that sja1105_tagger_data no longer
stays in dp->priv but in ds->tagger_data, and that the sja1105 driver
now only populates the sja1105_port_deferred_xmit callback pointer.
The kthread worker is now the responsibility of the tagger.

The sja1105 driver also alters the tagger's state some more, especially
with regard to the PTP RX timestamping state. This will be fixed up a
bit in further changes.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:33 +00:00
Vladimir Oltean
22ee9f8e40 net: dsa: sja1105: move ts_id from sja1105_tagger_data
The TX timestamp ID is incremented by the SJA1110 PTP timestamping
callback (->port_tx_timestamp) for every packet, when cloning it.
It isn't used by the tagger at all, even though it sits inside the
struct sja1105_tagger_data.

Also, serialization to this structure is currently done through
tagger_data->meta_lock, which is a cheap hack because the meta_lock
isn't used for anything else on SJA1110 (sja1105_rcv_meta_state_machine
isn't called).

This change moves ts_id from sja1105_tagger_data to sja1105_private and
introduces a dedicated spinlock for it, also in sja1105_private.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:33 +00:00
Vladimir Oltean
bfcf142522 net: dsa: sja1105: make dp->priv point directly to sja1105_tagger_data
The design of the sja1105 tagger dp->priv is that each port has a
separate struct sja1105_port, and the sp->data pointer points to a
common struct sja1105_tagger_data.

We have removed all per-port members accessible by the tagger, and now
only struct sja1105_tagger_data remains. Make dp->priv point directly to
this.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:33 +00:00
Vladimir Oltean
6f6770ab1c net: dsa: sja1105: remove hwts_tx_en from tagger data
This tagger property is in fact not used at all by the tagger, only by
the switch driver. Therefore it makes sense to be moved to
sja1105_private.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:33 +00:00
Vladimir Oltean
d38049bbe7 net: dsa: sja1105: bring deferred xmit implementation in line with ocelot-8021q
When the ocelot-8021q driver was converted to deferred xmit as part of
commit 8d5f7954b7 ("net: dsa: felix: break at first CPU port during
init and teardown"), the deferred implementation was deliberately made
subtly different from what sja1105 has.

The implementation differences lied on the following observations:

- There might be a race between these two lines in tag_sja1105.c:

       skb_queue_tail(&sp->xmit_queue, skb_get(skb));
       kthread_queue_work(sp->xmit_worker, &sp->xmit_work);

  and the skb dequeue logic in sja1105_port_deferred_xmit(). For
  example, the xmit_work might be already queued, however the work item
  has just finished walking through the skb queue. Because we don't
  check the return code from kthread_queue_work, we don't do anything if
  the work item is already queued.

  However, nobody will take that skb and send it, at least until the
  next timestampable skb is sent. This creates additional (and
  avoidable) TX timestamping latency.

  To close that race, what the ocelot-8021q driver does is it doesn't
  keep a single work item per port, and a skb timestamping queue, but
  rather dynamically allocates a work item per packet.

- It is also unnecessary to have more than one kthread that does the
  work. So delete the per-port kthread allocations and replace them with
  a single kthread which is global to the switch.

This change brings the two implementations in line by applying those
observations to the sja1105 driver as well.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:33 +00:00
Vladimir Oltean
a3d74295d7 net: dsa: sja1105: let deferred packets time out when sent to ports going down
This code is not necessary and complicates the conversion of this driver
to tagger-owned memory. If there is a PTP packet that is sent
concurrently with the port getting disabled, the deferred xmit mechanism
is robust enough to time out when it sees that it hasn't been delivered,
and recovers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:33 +00:00
Vladimir Oltean
35d9768021 net: dsa: tag_ocelot: convert to tagger-owned data
The felix driver makes very light use of dp->priv, and the tagger is
effectively stateless. dp->priv is practically only needed to set up a
callback to perform deferred xmit of PTP and STP packets using the
ocelot-8021q tagging protocol (the main ocelot tagging protocol makes no
use of dp->priv, although this driver sets up dp->priv irrespective of
actual tagging protocol in use).

struct felix_port (what used to be pointed to by dp->priv) is removed
and replaced with a two-sided structure. The public side of this
structure, visible to the switch driver, is ocelot_8021q_tagger_data.
The private side is ocelot_8021q_tagger_private, and the latter
structure physically encapsulates the former. The public half of the
tagger data structure can be accessed through a helper of the same name
(ocelot_8021q_tagger_data) which also sanity-checks the protocol
currently in use by the switch. The public/private split was requested
by Andrew Lunn.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:33 +00:00
Vladimir Oltean
dc452a471d net: dsa: introduce tagger-owned storage for private and shared data
Ansuel is working on register access over Ethernet for the qca8k switch
family. This requires the qca8k tagging protocol driver to receive
frames which aren't intended for the network stack, but instead for the
qca8k switch driver itself.

The dp->priv is currently the prevailing method for passing data back
and forth between the tagging protocol driver and the switch driver.
However, this method is riddled with caveats.

The DSA design allows in principle for any switch driver to return any
protocol it desires in ->get_tag_protocol(). The dsa_loop driver can be
modified to do just that. But in the current design, the memory behind
dp->priv has to be allocated by the switch driver, so if the tagging
protocol is paired to an unexpected switch driver, we may end up in NULL
pointer dereferences inside the kernel, or worse (a switch driver may
allocate dp->priv according to the expectations of a different tagger).

The latter possibility is even more plausible considering that DSA
switches can dynamically change tagging protocols in certain cases
(dsa <-> edsa, ocelot <-> ocelot-8021q), and the current design lends
itself to mistakes that are all too easy to make.

This patch proposes that the tagging protocol driver should manage its
own memory, instead of relying on the switch driver to do so.
After analyzing the different in-tree needs, it can be observed that the
required tagger storage is per switch, therefore a ds->tagger_data
pointer is introduced. In principle, per-port storage could also be
introduced, although there is no need for it at the moment. Future
changes will replace the current usage of dp->priv with ds->tagger_data.

We define a "binding" event between the DSA switch tree and the tagging
protocol. During this binding event, the tagging protocol's ->connect()
method is called first, and this may allocate some memory for each
switch of the tree. Then a cross-chip notifier is emitted for the
switches within that tree, and they are given the opportunity to fix up
the tagger's memory (for example, they might set up some function
pointers that represent virtual methods for consuming packets).
Because the memory is owned by the tagger, there exists a ->disconnect()
method for the tagger (which is the place to free the resources), but
there doesn't exist a ->disconnect() method for the switch driver.
This is part of the design. The switch driver should make minimal use of
the public part of the tagger data, and only after type-checking it
using the supplied "proto" argument.

In the code there are in fact two binding events, one is the initial
event in dsa_switch_setup_tag_protocol(). At this stage, the cross chip
notifier chains aren't initialized, so we call each switch's connect()
method by hand. Then there is dsa_tree_bind_tag_proto() during
dsa_tree_change_tag_proto(), and here we have an old protocol and a new
one. We first connect to the new one before disconnecting from the old
one, to simplify error handling a bit and to ensure we remain in a valid
state at all times.

Co-developed-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:51:33 +00:00
Jagan Teki
f471b1b2db arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards
This patch fixes the Bluetooth on ROCK Pi 4 boards.

ROCK Pi 4 boards has BCM4345C5 and now it is supported
on Mainline Linux, brcm,bcm43438-bt still working but
observed the BT Audio issues with latest test.

So, use the BCM4345C5 compatible and its associated
properties like clock-names as lpo and max-speed.

Attach vbat and vddio supply rails as well.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20211112142359.320798-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-12-12 13:50:22 +01:00
Tobias Waldekranz
e0068620e5 net: dsa: mv88e6xxx: Add tx fwd offload PVT on intermediate devices
In a typical mv88e6xxx switch tree like this:

  CPU
   |    .----.
.--0--. | .--0--.
| sw0 | | | sw1 |
'-1-2-' | '-1-2-'
    '---'

If sw1p{1,2} are added to a bridge that sw0p1 is not a part of, sw0
still needs to add a crosschip PVT entry for the virtual DSA device
assigned to represent the bridge.

Fixes: ce5df6894a ("net: dsa: mv88e6xxx: map virtual bridges with forwarding offload in the PVT")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:38:23 +00:00
xu xin
8c8b7aa7fb net: Enable neighbor sysctls that is save for userns root
Inside netns owned by non-init userns, sysctls about ARP/neighbor is
currently not visible and configurable.

For the attributes these sysctls correspond to, any modifications make
effects on the performance of networking(ARP, especilly) only in the
scope of netns, which does not affect other netns.

Actually, some tools via netlink can modify these attribute. iproute2 is
an example. see as follows:

$ unshare -ur -n
$ cat /proc/sys/net/ipv4/neigh/lo/retrans_time
cat: can't open '/proc/sys/net/ipv4/neigh/lo/retrans_time': No such file
or directory
$ ip ntable show dev lo
inet arp_cache
    dev lo
    refcnt 1 reachable 19494 base_reachable 30000 retrans 1000
    gc_stale 60000 delay_probe 5000 queue 101
    app_probes 0 ucast_probes 3 mcast_probes 3
    anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000

inet6 ndisc_cache
    dev lo
    refcnt 1 reachable 42394 base_reachable 30000 retrans 1000
    gc_stale 60000 delay_probe 5000 queue 101
    app_probes 0 ucast_probes 3 mcast_probes 3
    anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 0
$ ip ntable change name arp_cache dev <if> retrans 2000
inet arp_cache
    dev lo
    refcnt 1 reachable 22917 base_reachable 30000 retrans 2000
    gc_stale 60000 delay_probe 5000 queue 101
    app_probes 0 ucast_probes 3 mcast_probes 3
    anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000

inet6 ndisc_cache
    dev lo
    refcnt 1 reachable 35524 base_reachable 30000 retrans 1000
    gc_stale 60000 delay_probe 5000 queue 101
    app_probes 0 ucast_probes 3 mcast_probes 3
    anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 0

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12 12:34:38 +00:00
David Heidelberg
a39891a6e4 arm64: dts: rockchip: Add missing secondary compatible for PX30 DSI
Add second DSI compatible to comply with DT schema validation
comming in the second patch.

Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211211233818.88482-1-david@ixit.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-12-12 13:07:29 +01:00
Pavel Hofman
ca57373969 usb: core: config: using bit mask instead of individual bits
Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for
extracting multiple-transactions bits from wMaxPacketSize value.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-12 13:06:39 +01:00
Pavel Hofman
1a3910c809 usb: core: config: fix validation of wMaxPacketValue entries
The checks performed by commit aed9d65ac3 ("USB: validate
wMaxPacketValue entries in endpoint descriptors") require that initial
value of the maxp variable contains both maximum packet size bits
(10..0) and multiple-transactions bits (12..11). However, the existing
code assings only the maximum packet size bits. This patch assigns all
bits of wMaxPacketSize to the variable.

Fixes: aed9d65ac3 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-12 13:06:35 +01:00