Commit graph

1,105,074 commits

Author SHA1 Message Date
James Smart
4437503bfb scsi: lpfc: Update lpfc version to 14.0.0.4
Update lpfc version to 14.0.0.4.

Link: https://lore.kernel.org/r/20211204002644.116455-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:37 -05:00
James Smart
6014a2468f scsi: lpfc: Add additional debugfs support for CMF
Dump raw CMF parameter information in debugfs cgn_buffer.

Link: https://lore.kernel.org/r/20211204002644.116455-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:37 -05:00
James Smart
05116ef9c4 scsi: lpfc: Cap CMF read bytes to MBPI
Ensure read bytes data does not go over MBPI for CMF timer intervals that
are purposely shortened.

Link: https://lore.kernel.org/r/20211204002644.116455-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:37 -05:00
James Smart
a6269f8370 scsi: lpfc: Adjust CMF total bytes and rxmonitor
Calculate any extra bytes needed to account for timer accuracy. If we are
less than LPFC_CMF_INTERVAL, then calculate the adjustment needed for total
to reflect a full LPFC_CMF_INTERVAL.

Add additional info to rxmonitor, and adjust some log formatting.

Link: https://lore.kernel.org/r/20211204002644.116455-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:37 -05:00
James Smart
7dd2e2a923 scsi: lpfc: Trigger SLI4 firmware dump before doing driver cleanup
Extraneous teardown routines are present in the firmware dump path causing
altered states in firmware captures.

When a firmware dump is requested via sysfs, trigger the dump immediately
without tearing down structures and changing adapter state.

The driver shall rely on pre-existing firmware error state clean up
handlers to restore the adapter.

Link: https://lore.kernel.org/r/20211204002644.116455-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:36 -05:00
James Smart
8ed190a919 scsi: lpfc: Fix NPIV port deletion crash
The driver is calling schedule_timeout after the DA_ID nameserver request
and LOGO commands are issued to the fabric by the initiator virtual
endport.  These fixed delay functions are causing long delays in the
driver's worker thread when processing discovery I/Os in a serialized
fashion, which is then triggering mailbox timeout errors artificially.

To fix this, don't wait on the DA_ID request to complete and call
wait_event_timeout to allow the vport delete thread to make progress on an
event driven basis rather than fixing the wait time.

Link: https://lore.kernel.org/r/20211204002644.116455-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:36 -05:00
James Smart
7576d48c64 scsi: lpfc: Fix lpfc_force_rscn ndlp kref imbalance
Issuing lpfc_force_rscn twice results in an ndlp kref use-after-free call
trace.

A prior patch reworked the get/put handling by ensuring nlp_get was done
before WQE submission and a put was done in the completion path.
Unfortunately, the issue_els_rscn path had a piece of legacy code that did
a nlp_put, causing an imbalance on the ref counts.

Fixed by removing the unnecessary legacy code snippet.

Link: https://lore.kernel.org/r/20211204002644.116455-4-jsmart2021@gmail.com
Fixes: 4430f7fd09 ("scsi: lpfc: Rework locations of ndlp reference taking")
Cc: <stable@vger.kernel.org> # v5.11+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:36 -05:00
James Smart
2e81b1a374 scsi: lpfc: Change return code on I/Os received during link bounce
During heavy I/O testing with issue_lip to bounce the link, occasionally
I/O is terminated with status 3 result 9, which means the RPI is suspended.
The I/O is completed and this type of error will result in immediate retry
by the SCSI layer. The retry count expires and the I/O fails and returns
error to the application.

To avoid these quick retry/retries exhausted scenarios change the return
code given to the midlayer to DID_REQUEUE rather than DID_ERROR. This gets
them retried, and eventually succeed when the link recovers.

Link: https://lore.kernel.org/r/20211204002644.116455-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:36 -05:00
James Smart
f0d3919697 scsi: lpfc: Fix leaked lpfc_dmabuf mbox allocations with NPIV
During rmmod testing, messages appeared indicating lpfc_mbuf_pool entries
were still busy. This situation was only seen doing rmmod after at least 1
vport (NPIV) instance was created and destroyed. The number of messages
scaled with the number of vports created.

When a vport is created, it can receive a PLOGI from another initiator
Nport.  When this happens, the driver prepares to ack the PLOGI and
prepares an RPI for registration (via mbx cmd) which includes an mbuf
allocation. During the unsolicited PLOGI processing and after the RPI
preparation, the driver recognizes it is one of the vport instances and
decides to reject the PLOGI. During the LS_RJT preparation for the PLOGI,
the mailbox struct allocated for RPI registration is freed, but the mbuf
that was also allocated is not released.

Fix by freeing the mbuf with the mailbox struct in the LS_RJT path.

As part of the code review to figure the issue out a couple of other areas
where found that also would not have released the mbuf. Those are cleaned
up as well.

Link: https://lore.kernel.org/r/20211204002644.116455-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:35:36 -05:00
Andrii Nakryiko
fda684fb5e Merge branch 'samples: bpf: fix build issues with Clang/LLVM'
Alexander Lobakin says:

====================

Samples, at least XDP ones, can be built only with the compiler used
to build the kernel itself.
However, XDP sample infra introduced in Aug'21 was probably tested
with GCC/Binutils only as it's not really compilable for now with
Clang/LLVM.
These two are trivial fixes addressing this.
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2021-12-06 19:33:45 -08:00
Alexander Lobakin
6f670d06e4 samples: bpf: Fix 'unknown warning group' build warning on Clang
Clang doesn't have 'stringop-truncation' group like GCC does, and
complains about it when building samples which use xdp_sample_user
infra:

 samples/bpf/xdp_sample_user.h:48:32: warning: unknown warning group '-Wstringop-truncation', ignored [-Wunknown-warning-option]
 #pragma GCC diagnostic ignored "-Wstringop-truncation"
                                ^
[ repeat ]

Those are harmless, but avoidable when guarding it with ifdef.
I could guard push/pop as well, but this would require one more
ifdef cruft around a single line which I don't think is reasonable.

Fixes: 156f886cf6 ("samples: bpf: Add basic infrastructure for XDP samples")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211203195004.5803-3-alexandr.lobakin@intel.com
2021-12-06 19:33:44 -08:00
Alexander Lobakin
e64fbcaa7a samples: bpf: Fix xdp_sample_user.o linking with Clang
Clang (13) doesn't get the jokes about specifying libraries to link in
cclags of individual .o objects:

clang-13: warning: -lm: 'linker' input unused [-Wunused-command-line-argument]
[ ... ]
  LD  samples/bpf/xdp_redirect_cpu
  LD  samples/bpf/xdp_redirect_map_multi
  LD  samples/bpf/xdp_redirect_map
  LD  samples/bpf/xdp_redirect
  LD  samples/bpf/xdp_monitor
/usr/bin/ld: samples/bpf/xdp_sample_user.o: in function `sample_summary_print':
xdp_sample_user.c:(.text+0x84c): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x870): undefined reference to `ceil'
/usr/bin/ld: xdp_sample_user.c:(.text+0x8cf): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x8f3): undefined reference to `ceil'
[ more ]

Specify '-lm' as ldflags for all xdp_sample_user.o users in the main
Makefile and remove it from ccflags of ^ in Makefile.target -- just
like it's done for all other samples. This works with all compilers.

Fixes: 6e1051a54e ("samples: bpf: Convert xdp_monitor to XDP samples helper")
Fixes: b926c55d85 ("samples: bpf: Convert xdp_redirect to XDP samples helper")
Fixes: e531a220cc ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Fixes: bbe65865aa ("samples: bpf: Convert xdp_redirect_map to XDP samples helper")
Fixes: 594a116b2a ("samples: bpf: Convert xdp_redirect_map_multi to XDP samples helper")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211203195004.5803-2-alexandr.lobakin@intel.com
2021-12-06 19:33:44 -08:00
Bart Van Assche
eaab9b5730 scsi: ufs: Implement polling support
The time spent in io_schedule() and also the interrupt latency are
significant when submitting direct I/O to a UFS device. Hence this patch
that implements polling support. User space software can enable polling by
passing the RWF_HIPRI flag to the preadv2() system call or the
IORING_SETUP_IOPOLL flag to the io_uring interface.

Although the block layer supports to partition the tag space for
interrupt-based completions (HCTX_TYPE_DEFAULT) purposes and polling
(HCTX_TYPE_POLL), the choice has been made to use the same hardware queue
for both hctx types because partitioning the tag space would negatively
affect performance.

On my test setup this patch increases IOPS from 2736 to 22000 (8x) for the
following test:

for hipri in 0 1; do
    fio --ioengine=io_uring --iodepth=1 --rw=randread \
    --runtime=60 --time_based=1 --direct=1 --name=qd1 \
    --filename=/dev/block/sda --ioscheduler=none --gtod_reduce=1 \
    --norandommap --hipri=$hipri
done

Link: https://lore.kernel.org/r/20211203231950.193369-18-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:34 -05:00
Bart Van Assche
8d077ede48 scsi: ufs: Optimize the command queueing code
Remove the clock scaling lock from ufshcd_queuecommand() since it is a
performance bottleneck. Instead check the SCSI device budget bitmaps in the
code that waits for ongoing ufshcd_queuecommand() calls. A bit is set in
sdev->budget_map just before scsi_queue_rq() is called and a bit is cleared
from that bitmap if scsi_queue_rq() does not submit the request or after
the request has finished. See also the blk_mq_{get,put}_dispatch_budget()
calls in the block layer.

There is no risk for a livelock since the block layer delays queue reruns
if queueing a request fails because the SCSI host has been blocked.

Link: https://lore.kernel.org/r/20211203231950.193369-17-bvanassche@acm.org
Cc: Asutosh Das (asd) <asutoshd@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:34 -05:00
Bart Van Assche
5675c381ea scsi: ufs: Stop using the clock scaling lock in the error handler
Instead of locking and unlocking the clock scaling lock, surround the
command queueing code with an RCU reader lock and call synchronize_rcu().
This patch prepares for removal of the clock scaling lock.

Link: https://lore.kernel.org/r/20211203231950.193369-16-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:34 -05:00
Bart Van Assche
3489c34bd0 scsi: ufs: Fix a kernel crash during shutdown
Fix the following kernel crash:

Unable to handle kernel paging request at virtual address ffffffc91e735000
Call trace:
 __queue_work+0x26c/0x624
 queue_work_on+0x6c/0xf0
 ufshcd_hold+0x12c/0x210
 __ufshcd_wl_suspend+0xc0/0x400
 ufshcd_wl_shutdown+0xb8/0xcc
 device_shutdown+0x184/0x224
 kernel_restart+0x4c/0x124
 __arm64_sys_reboot+0x194/0x264
 el0_svc_common+0xc8/0x1d4
 do_el0_svc+0x30/0x8c
 el0_svc+0x20/0x30
 el0_sync_handler+0x84/0xe4
 el0_sync+0x1bc/0x1c0

Fix this crash by ungating the clock before destroying the work queue on
which clock gating work is queued.

Link: https://lore.kernel.org/r/20211203231950.193369-15-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:34 -05:00
Bart Van Assche
1fbaa02dfd scsi: ufs: Improve SCSI abort handling further
Release resources when aborting a command. Make sure that aborted commands
are completed once by clearing the corresponding tag bit from
hba->outstanding_reqs. This patch is an improved version of commit
3ff1f6b6ba ("scsi: ufs: core: Improve SCSI abort handling").

Link: https://lore.kernel.org/r/20211203231950.193369-14-bvanassche@acm.org
Fixes: 7a3e97b0dc ("[SCSI] ufshcd: UFS Host controller driver")
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:34 -05:00
Bart Van Assche
6f8dafdee6 scsi: ufs: Introduce ufshcd_release_scsi_cmd()
The only functional change in this patch is that scsi_done() is now called
after ufshcd_release() and ufshcd_clk_scaling_update_busy() instead of
before.

The next patch in this series will introduce a call to
ufshcd_release_scsi_cmd() in the abort handler.

Link: https://lore.kernel.org/r/20211203231950.193369-13-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:34 -05:00
Bart Van Assche
3eb9dcc027 scsi: ufs: Remove the 'update_scaling' local variable
This patch does not change any functionality but makes the next patch in
this series easier to read.

Link: https://lore.kernel.org/r/20211203231950.193369-12-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:34 -05:00
Bart Van Assche
511a083b8b scsi: ufs: Remove hba->cmd_queue
The previous patch removed all code that uses hba->cmd_queue. Hence also
remove hba->cmd_queue itself.

Link: https://lore.kernel.org/r/20211203231950.193369-11-bvanassche@acm.org
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:33 -05:00
Bart Van Assche
945c3cca05 scsi: ufs: Fix a deadlock in the error handler
The following deadlock has been observed on a test setup:

 - All tags allocated

 - The SCSI error handler calls ufshcd_eh_host_reset_handler()

 - ufshcd_eh_host_reset_handler() queues work that calls
   ufshcd_err_handler()

 - ufshcd_err_handler() locks up as follows:

Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt
Call trace:
 __switch_to+0x298/0x5d8
 __schedule+0x6cc/0xa94
 schedule+0x12c/0x298
 blk_mq_get_tag+0x210/0x480
 __blk_mq_alloc_request+0x1c8/0x284
 blk_get_request+0x74/0x134
 ufshcd_exec_dev_cmd+0x68/0x640
 ufshcd_verify_dev_init+0x68/0x35c
 ufshcd_probe_hba+0x12c/0x1cb8
 ufshcd_host_reset_and_restore+0x88/0x254
 ufshcd_reset_and_restore+0xd0/0x354
 ufshcd_err_handler+0x408/0xc58
 process_one_work+0x24c/0x66c
 worker_thread+0x3e8/0xa4c
 kthread+0x150/0x1b4
 ret_from_fork+0x10/0x30

Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved
request.

Link: https://lore.kernel.org/r/20211203231950.193369-10-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:33 -05:00
Bart Van Assche
fc21da8a84 scsi: ufs: Rework ufshcd_change_queue_depth()
Prepare for making sdev->host->can_queue less than hba->nutrs. This patch
does not change any functionality.

Link: https://lore.kernel.org/r/20211203231950.193369-9-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:33 -05:00
Bart Van Assche
bd0b353831 scsi: ufs: Remove ufshcd_any_tag_in_use()
Use hba->outstanding_reqs instead of ufshcd_any_tag_in_use(). This patch
prepares for removal of the blk_mq_start_request() call from
ufshcd_wait_for_dev_cmd(). blk_mq_tagset_busy_iter() only iterates over
started requests.

Link: https://lore.kernel.org/r/20211203231950.193369-8-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:33 -05:00
Bart Van Assche
21ad0e4908 scsi: ufs: Fix race conditions related to driver data
The driver data pointer must be set before any callbacks are registered
that use that pointer. Hence move the initialization of that pointer from
after the ufshcd_init() call to inside ufshcd_init().

Link: https://lore.kernel.org/r/20211203231950.193369-7-bvanassche@acm.org
Fixes: 3b1d05807a ("[SCSI] ufs: Segregate PCI Specific Code")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:33 -05:00
Bart Van Assche
d77ea8226b scsi: ufs: Remove dead code
Commit 7252a36030 ("scsi: ufs: Avoid busy-waiting by eliminating tag
conflicts") guarantees that 'tag' is not in use by any SCSI command.
Remove the check that returns early if a conflict occurs.

Link: https://lore.kernel.org/r/20211203231950.193369-6-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:33 -05:00
Bart Van Assche
59830c095c scsi: ufs: Remove the sdev_rpmb member
Since the sdev_rpmb member of struct ufs_hba is only used inside
ufshcd_scsi_add_wlus(), convert it into a local variable.

Link: https://lore.kernel.org/r/20211203231950.193369-5-bvanassche@acm.org
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:33 -05:00
Bart Van Assche
d656dc9b0b scsi: ufs: Remove is_rpmb_wlun()
Commit edc0596cc0 ("scsi: ufs: core: Stop clearing UNIT ATTENTIONS")
removed all callers of is_rpmb_wlun(). Hence also remove the function
itself.

Link: https://lore.kernel.org/r/20211203231950.193369-4-bvanassche@acm.org
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:33 -05:00
Bart Van Assche
b427609e11 scsi: ufs: Rename a function argument
The new name makes it clear what the meaning of the function argument is.

Link: https://lore.kernel.org/r/20211203231950.193369-3-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:32 -05:00
Bart Van Assche
4bc3bffc1a scsi: core: Fix scsi_device_max_queue_depth()
The comment above scsi_device_max_queue_depth() and also the description of
commit ca44532139 ("scsi: core: Make sure sdev->queue_depth is <=
max(shost->can_queue, 1024)") contradict the implementation of the function
scsi_device_max_queue_depth(). Additionally, the maximum queue depth of a
SCSI LUN never exceeds host->can_queue. Fix scsi_device_max_queue_depth()
by changing max_t() into min_t().

Link: https://lore.kernel.org/r/20211203231950.193369-2-bvanassche@acm.org
Fixes: ca44532139 ("scsi: core: Make sure sdev->queue_depth is <= max(shost->can_queue, 1024)")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:32 -05:00
Colin Ian King
c27fd25db3 scsi: mptfusion: Remove redundant variable r
Variable r is being assigned a value that is never read. The assignment is
redundant and so is the variable, so remove these. Remove unnecessary the
{} braces in the if statement too.

Link: https://lore.kernel.org/r/20211205225901.54362-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:22:18 -05:00
Sebastian Andrzej Siewior
4c3e3f8cfc scsi: be2iscsi: Remove maintainers
The email addresses of

   Subbu Seetharaman <subbu.seetharaman@broadcom.com>
   Jitendra Bhivare <jitendra.bhivare@broadcom.com>

are no longer working. Remove Subbu and Jitendra as maintainers.

Link: https://lore.kernel.org/r/20211202201141.cytqe73ish6oa356@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:19:32 -05:00
Florian Fainelli
74d8015253 scsi: qla4xxx: Format SYSFS_FLAG_FW_SEL_BOOT as byte
qedi formats SYSFS_FLAG_FW_SEL_BOOT as a byte and the qla4xxx driver does
exactly the same thing. Align them for consistency.

Link: https://lore.kernel.org/r/20211130203813.12138-3-f.fainelli@gmail.com
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:17:19 -05:00
Florian Fainelli
9f9b7fa946 scsi: qedi: Fix SYSFS_FLAG_FW_SEL_BOOT formatting
The format used for formatting SYSFS_FLAG_FW_SEL_BOOT creates the
following warning:

drivers/scsi/qedi/qedi_main.c:2259:35: warning: format specifies type
'char' but the argument has type 'int' [-Wformat]
                   rc = snprintf(buf, 3, "%hhd\n",
SYSFS_FLAG_FW_SEL_BOOT);

Fix this to cast the constant as a char since the intention is to print it
via sysfs as a byte.

Link: https://lore.kernel.org/r/20211130203813.12138-2-f.fainelli@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:17:18 -05:00
Christophe JAILLET
4d6942e266 scsi: hisi_sas: Use non-atomic bitmap functions when possible
All uses of the 'hisi_hba->slot_index_tags' bitmap are protected with the
'hisi_hba->lock' spinlock.

Prefer the non-atomic '__[set|clear]_bit()' functions to save a few cycles.

Link: https://lore.kernel.org/r/8ee33e463523db080e6a2c06f332e47abb69359b.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:12:34 -05:00
Christophe JAILLET
d43efddf62 scsi: hisi_sas: Remove some useless code in hisi_sas_alloc()
The 'hisi_hba->slot_index_tags' bitmap is allocated with bitmap_zalloc() so
it is already cleared. There is no need to clear it another time, one bit
at a time.

Remove the corresponding useless code.

Link: https://lore.kernel.org/r/41c86e7e3e05a13bd586d8ee1b81296140b7a6eb.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:12:33 -05:00
Christophe JAILLET
54585ec62f scsi: hisi_sas: Use devm_bitmap_zalloc() when applicable
'hisi_hba->slot_index_tags' is a bitmap. Use 'devm_bitmap_zalloc()' to
simplify code, improve the semantic, and avoid some open-coded arithmetic
in allocator arguments.

Link: https://lore.kernel.org/r/4afa3f71e66c941c660627c7f5b0223b51968ebb.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:12:33 -05:00
Shin'ichiro Kawasaki
7db0e0c819 scsi: scsi_debug: Fix buffer size of REPORT ZONES command
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure.  Fix the
failure by handling ALLOCATION LENGTH as byte unit.

Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:04:35 -05:00
Manish Rangankar
3fe5185db4 scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issue
When issued LUN reset under heavy I/O we hit the qedi WARN_ON because of a
mismatch in firmware I/O cmd cleanup request count and I/O cmd cleanup
response count received. The mismatch is because of a race caused by the
postfix increment of cmd_cleanup_cmpl.

[qedi_clearsq:1295]:18: fatal error, need hard reset, cid=0x0
WARNING: CPU: 48 PID: 110963 at drivers/scsi/qedi/qedi_fw.c:1296 qedi_clearsq+0xa5/0xd0 [qedi]
CPU: 48 PID: 110963 Comm: kworker/u130:0 Kdump: loaded Tainted: G        W
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 04/15/2020
Workqueue: iscsi_conn_cleanup iscsi_cleanup_conn_work_fn [scsi_transport_iscsi]
RIP: 0010:qedi_clearsq+0xa5/0xd0 [qedi]
 RSP: 0018:ffffac2162c7fd98 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffff975213c40ab8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff9761bf816858 RDI: ffff9761bf816858
 RBP: ffff975247018628 R08: 000000000000522c R09: 000000000000005b
 R10: 0000000000000000 R11: ffffac2162c7fbd8 R12: ffff97522e1b2be8
 R13: 0000000000000000 R14: ffff97522e1b2800 R15: 0000000000000001
 FS:  0000000000000000(0000) GS:ffff9761bf800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f1a34e3e1a0 CR3: 0000000108bb2000 CR4: 0000000000350ee0
 Call Trace:
  qedi_ep_disconnect+0x533/0x550 [qedi]
  ? iscsi_dbg_trace+0x63/0x80 [scsi_transport_iscsi]
  ? _cond_resched+0x15/0x30
  ? iscsi_suspend_queue+0x19/0x40 [libiscsi]
  iscsi_ep_disconnect+0xb0/0x130 [scsi_transport_iscsi]
  iscsi_cleanup_conn_work_fn+0x82/0x130 [scsi_transport_iscsi]
  process_one_work+0x1a7/0x360
  ? create_worker+0x1a0/0x1a0
  worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  kthread+0x116/0x130
  ? kthread_flush_work_fn+0x10/0x10
  ret_from_fork+0x22/0x40
 ---[ end trace 5f1441f59082235c ]---

Link: https://lore.kernel.org/r/20211203095218.5477-1-mrangankar@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:00:54 -05:00
Alexei Starovoitov
29f2e5bd94 bpf: Silence purge_cand_cache build warning.
When CONFIG_DEBUG_INFO_BTF_MODULES is not set
the following warning can be seen:
kernel/bpf/btf.c:6588:13: warning: 'purge_cand_cache' defined but not used [-Wunused-function]
Fix it.

Fixes: 1e89106da2 ("bpf: Add bpf_core_add_cands() and wire it into bpf_core_apply_relo_insn().")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211207014839.6976-1-alexei.starovoitov@gmail.com
2021-12-06 18:24:34 -08:00
Tony Lu
1c5526968e net/smc: Clear memory when release and reuse buffer
Currently, buffers are cleared when smc connections are created and
buffers are reused. This slows down the speed of establishing new
connections. In most cases, the applications want to establish
connections as quickly as possible.

This patch moves memset() from connection creation path to release and
buffer unuse path, this trades off between speed of establishing and
release.

Test environments:
- CPU Intel Xeon Platinum 8 core, mem 32 GiB, nic Mellanox CX4
- socket sndbuf / rcvbuf: 16384 / 131072 bytes
- w/o first round, 5 rounds, avg, 100 conns batch per round
- smc_buf_create() use bpftrace kprobe, introduces extra latency

Latency benchmarks for smc_buf_create():
  w/o patch : 19040.0 ns
  w/  patch :  1932.6 ns
  ratio :        10.2% (-89.8%)

Latency benchmarks for socket create and connect:
  w/o patch :   143.3 us
  w/  patch :   102.2 us
  ratio :        71.3% (-28.7%)

The latency of establishing connections is reduced by 28.7%.

Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20211203113331.2818873-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 17:01:28 -08:00
Song Liu
5a897531e0 perf bpf_skel: Do not use typedef to avoid error on old clang
When building bpf_skel with clang-10, typedef causes confusions like:

  libbpf: map 'prev_readings': unexpected def kind var.

Fix this by removing the typedef.

Fixes: 7fac83aaf2 ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/BEF5C312-4331-4A60-AEC0-AD7617CB2BC4@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:53 -03:00
Song Liu
f7c4e85bcc perf bpf: Fix building perf with BUILD_BPF_SKEL=1 by default in more distros
Arnaldo reported that building all his containers with BUILD_BPF_SKEL=1
to then make this the default he found problems in some distros where
the system linux/bpf.h file was being used and lacked this:

   util/bpf_skel/bperf_leader.bpf.c:13:20: error: use of undeclared identifier 'BPF_F_PRESERVE_ELEMS'
           __uint(map_flags, BPF_F_PRESERVE_ELEMS);

So use instead the vmlinux.h file generated by bpftool from BTF info.

This fixed these as well, getting the build back working on debian:11,
debian:experimental and ubuntu:21.10:

  In file included from In file included from util/bpf_skel/bperf_leader.bpf.cutil/bpf_skel/bpf_prog_profiler.bpf.c::33:
  :
  In file included from In file included from /usr/include/linux/bpf.h/usr/include/linux/bpf.h::1111:
  :
  /usr/include/linux/types.h/usr/include/linux/types.h::55::1010:: In file included from  util/bpf_skel/bperf_follower.bpf.c:3fatal errorfatal error:
  : : In file included from /usr/include/linux/bpf.h:'asm/types.h' file not found11'asm/types.h' file not found:

  /usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found
  #include <asm/types.h>#include <asm/types.h>

           ^~~~~~~~~~~~~         ^~~~~~~~~~~~~

  #include <asm/types.h>
           ^~~~~~~~~~~~~
  1 error generated.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/CF175681-8101-43D1-ABDB-449E644BE986@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:53 -03:00
Ian Rogers
4747395082 perf header: Fix memory leaks when processing feature headers
These leaks were found with leak sanitizer running "perf pipe recording
and injection test".

In pipe mode feat_fd may hold onto an events struct that needs freeing.

When string features are processed they may overwrite an already created
string, so free this before the overwrite.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118201730.2302927-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:53 -03:00
Ian Rogers
1aa79e5773 perf test: Reset shadow counts before loading
Otherwise load counting is an average. Without this change
duration_time in test_memory_bandwidth will alter its value if an
earlier test contains duration_time.

This patch fixes an issue that's introduced in the proposed patch:
https://lore.kernel.org/lkml/20211124015226.3317994-1-irogers@google.com/
in perf test "Parse and process metrics".

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211128085810.4027314-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:53 -03:00
Thomas Richter
6c481031c9 perf test: Fix 'Simple expression parser' test on arch without CPU die topology info
Some platforms do not have CPU die support, for example s390.

Commit
Cc: Ian Rogers <irogers@google.com>
Fixes: fdf1e29b61 ("perf expr: Add metric literals for topology.")
fails on s390:

  # perf test -Fv 7
    ...
  # FAILED tests/expr.c:173 #num_dies >= #num_packages
    ---- end ----
    Simple expression parser: FAILED!
  #

Investigating this issue leads to these functions:

 build_cpu_topology()
   +--> has_die_topology(void)
        {
           struct utsname uts;

           if (uname(&uts) < 0)
                  return false;
           if (strncmp(uts.machine, "x86_64", 6))
                  return false;
           ....
        }

which always returns false on s390. The caller build_cpu_topology()
checks has_die_topology() return value. On false the the struct
cpu_topology::die_cpu_list is not contructed and has zero entries. This
leads to the failing comparison: #num_dies >= #num_packages.  s390 of
course has a positive number of packages.

Fix this and check if the function build_cpu_topology() did build up
a die_cpus_list. The number of entries in this list should be larger
than 0. If the number of list element is zero, the die_cpus_list has
not been created and the check in function test__expr():

    TEST_ASSERT_VAL("#num_dies >= #num_packages", \
		    num_dies >= num_packages)

always fails.

Output after:

  # perf test -Fv 7
   7: Simple expression parser                                        :
   --- start ---
   division by zero
   syntax error
   ---- end ----
   Simple expression parser: Ok
  #

Fixes: fdf1e29b61 ("perf expr: Add metric literals for topology.")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20211129112339.3003036-1-tmricht@linux.ibm.com
[ Added comment in the added 'if (num_dies)' line about architectures not having die topology ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:53 -03:00
Arnaldo Carvalho de Melo
3d1d57debe tools build: Remove needless libpython-version feature check that breaks test-all fast path
Since 66dfdff03d ("perf tools: Add Python 3 support") we don't use
the tools/build/feature/test-libpython-version.c version in any Makefile
feature check:

  $ find tools/ -type f | xargs grep feature-libpython-version
  $

The only place where this was used was removed in 66dfdff03d:

  -        ifneq ($(feature-libpython-version), 1)
  -          $(warning Python 3 is not yet supported; please set)
  -          $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
  -          $(warning If you also have Python 2 installed, then)
  -          $(warning try something like:)
  -          $(warning $(and ,))
  -          $(warning $(and ,)  make PYTHON=python2)
  -          $(warning $(and ,))
  -          $(warning Otherwise, disable Python support entirely:)
  -          $(warning $(and ,))
  -          $(warning $(and ,)  make NO_LIBPYTHON=1)
  -          $(warning $(and ,))
  -          $(error   $(and ,))
  -        else
  -          LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
  -          EXTLIBS += $(PYTHON_EMBED_LIBADD)
  -          LANG_BINDINGS += $(obj-perf)python/perf.so
  -          $(call detected,CONFIG_LIBPYTHON)
  -        endif

And nowadays we either build with PYTHON=python3 or just install the
python3 devel packages and perf will build against it.

But the leftover feature-libpython-version check made the fast path
feature detection to break in all cases except when python2 devel files
were installed:

  $ rpm -qa | grep python.*devel
  python3-devel-3.9.7-1.fc34.x86_64
  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
  $ make -C tools/perf O=/tmp/build/perf install-bin
  make: Entering directory '/var/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j32' parallel build
    HOSTCC  /tmp/build/perf/fixdep.o
  <SNIP>
  $ cat /tmp/build/perf/feature/test-all.make.output
  In file included from test-all.c:18:
  test-libpython-version.c:5:10: error: #error
      5 |         #error
        |          ^~~~~
  $ ldd ~/bin/perf | grep python
	libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000)
  $

As python3 is the norm these days, fix this by just removing the unused
feature-libpython-version feature check, making the test-all fast path
to work with the common case.

With this:

  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
  $ make -C tools/perf O=/tmp/build/perf install-bin |& head
  make: Entering directory '/var/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j32' parallel build
    HOSTCC  /tmp/build/perf/fixdep.o
    HOSTLD  /tmp/build/perf/fixdep-in.o
    LINK    /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  $ ldd ~/bin/perf | grep python
	libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000)
  $ cat /tmp/build/perf/feature/test-all.make.output
  $

Reviewed-by: James Clark <james.clark@arm.com>
Fixes: 66dfdff03d ("perf tools: Add Python 3 support")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:53 -03:00
Ian Rogers
4ffbe87e2d perf tools: Fix SMT detection fast read path
sysfs__read_int() returns 0 on success, and so the fast read path was
always failing.

Fixes: bb629484d9 ("perf tools: Simplify checking if SMT is active.")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211124001231.3277836-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:53 -03:00
Arnaldo Carvalho de Melo
cba43fcf7a tools headers UAPI: Sync powerpc syscall table file changed by new futex_waitv syscall
To pick the changes in this cset:

  a0eb2da92b ("futex: Wireup futex_waitv syscall")

That add support for this new syscall in tools such as 'perf trace'.

For instance, this is now possible (adapted from the x86_64 test output):

  # perf trace -e futex_waitv
  ^C#
  # perf trace -v -e futex_waitv
  event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
  ^C#
  # perf trace -v -e futex* --max-events 10
  event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 221 || id == 449)
  mmap size 528384B
           ? (         ): Timer/219310  ... [continued]: futex())                                            = -1 ETIMEDOUT (Connection timed out)
       0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
       0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.088 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
       0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.088 ( 0.089 ms): Timer/219310  ... [continued]: futex())                                            = 0
       0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.181 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
  #

That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.

  $ grep futex tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
  221	32	futex				sys_futex_time32
  221	64	futex				sys_futex
  221	spu	futex				sys_futex
  422	32	futex_time64			sys_futex			sys_futex
  449	common  futex_waitv                     sys_futex_waitv
  $

This addresses this perf build warnings:

  Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YZ%2F1OU9mJuyS2HMa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:53 -03:00
Adrian Hunter
c29d979260 perf inject: Fix itrace space allowed for new attributes
The space allowed for new attributes can be too small if existing header
information is large. That can happen, for example, if there are very
many CPUs, due to having an event ID per CPU per event being stored in the
header information.

Fix by adding the existing header.data_offset. Also increase the extra
space allowed to 8KiB and align to a 4KiB boundary for neatness.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20211125071457.2066863-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:52 -03:00
Arnaldo Carvalho de Melo
71a16df164 tools headers UAPI: Sync s390 syscall table file changed by new futex_waitv syscall
To pick the changes in these csets:

  6c122360cf ("s390: wire up sys_futex_waitv system call")

That add support for this new syscall in tools such as 'perf trace'.

For instance, this is now possible (adapted from the x86_64 test output):

  # perf trace -e futex_waitv
  ^C#
  # perf trace -v -e futex_waitv
  event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
  ^C#
  # perf trace -v -e futex* --max-events 10
  event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 238 || id == 449)
           ? (         ): Timer/219310  ... [continued]: futex())                                            = -1 ETIMEDOUT (Connection timed out)
       0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
       0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.088 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
       0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.088 ( 0.089 ms): Timer/219310  ... [continued]: futex())                                            = 0
       0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.181 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
  #

That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.

  $ grep futex tools/perf/arch/s390/entry/syscalls/syscall.tbl
  238  common	futex			sys_futex			sys_futex_time32
  422	32	futex_time64		-				sys_futex
  449  common	futex_waitv		sys_futex_waitv			sys_futex_waitv
  $

This addresses this perf build warnings:

  Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/lkml/YZ%2F2qRW%2FTScYTP1U@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06 21:57:52 -03:00