In order to avoid exposing hypervisor (EL2) data structures directly to
the host, generate hyp_constants.h to provide constants such as structure
sizes to the host without dragging in the definitions themselves.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211202171048.26924-3-will@kernel.org
asm/mmu.h refers to cpus_have_const_cap() in the definition of
arm64_kernel_unmapped_at_el0() so include asm/cpufeature.h directly
rather than force all users of the header to do it themselves.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211202171048.26924-2-will@kernel.org
The only usage of kvm_io_gic_ops is to make a comparison with its
address and to pass its address to kvm_iodevice_init() which takes a
pointer to const kvm_io_device_ops as input. Make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211204213518.83642-1-rikard.falkeborn@gmail.com
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.
Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- 10" LVDS Panel (SN65DSI84 DSI-LVDS bridge on SoM)
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.
Add bindings for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit has plugged with
7" LVDS panel.
Engicam i.Core STM32MP1 SoM has SN65DSI84 DSI to LVDS bridge.
This patch adds a display pipeline to connect DSI to SN65DSI84
to 7" LVDS panel.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The aspeed driver uses the gem_cma_helper code, but does
noto enforce enabling this through Kconfig:
x86_64-linux-ld: drivers/gpu/drm/aspeed/aspeed_gfx_drv.o:(.rodata+0x2c8): undefined reference to `drm_gem_cma_prime_import_sg_table'
x86_64-linux-ld: drivers/gpu/drm/aspeed/aspeed_gfx_drv.o:(.rodata+0x2d8): undefined reference to `drm_gem_cma_dumb_create'
x86_64-linux-ld: drivers/gpu/drm/aspeed/aspeed_gfx_crtc.o: in function `aspeed_gfx_pipe_update':
aspeed_gfx_crtc.c:(.text+0xe5): undefined reference to `drm_fb_cma_get_gem_obj'
Add the same 'select' that is used in other such drivers.
Fixes: 09717af7d1 ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211204174637.1160725-2-arnd@kernel.org
The fsl-dcu driver uses the gem_cma_helper code, but does
noto enforce enabling this through Kconfig:
arm-linux-gnueabi-ld: drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.o:(.rodata+0x32c): undefined reference to `drm_gem_cma_prime_import_sg_table'
arm-linux-gnueabi-ld: drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.o:(.rodata+0x334): undefined reference to `drm_gem_cma_dumb_create'
arm-linux-gnueabi-ld: drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.o: in function `fsl_dcu_drm_plane_atomic_update':
fsl_dcu_drm_plane.c:(.text+0x144): undefined reference to `drm_fb_cma_get_gem_obj'
Add the same 'select' that is used in other such drivers.
Fixes: 09717af7d1 ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211204174637.1160725-1-arnd@kernel.org
In Device Tree specification it's recommended to use "i2c" name for I2C
nodes. Now that i2c-exynos5 dt-schema binding was added, it shows some
warnings like this when validating HS-I2C nodes:
hsi2c@xxxxxxxxx: $nodename:0: 'hsi2c@xxxxxxxx' does not match
'^i2c(@.*)?'
From schema: Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
Rename hsi2c@* to i2c@* to fix those warnings.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211204215820.17378-9-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
In Device Tree specification it's recommended to use "i2c" name for I2C
nodes. Now that i2c-exynos5 dt-schema binding was added, it shows some
warnings like this when validating HS-I2C nodes:
hsi2c@xxxxxxxxx: $nodename:0: 'hsi2c@xxxxxxxx' does not match
'^i2c(@.*)?'
From schema: Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
Rename hsi2c@* to i2c@* to fix those warnings.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211204215820.17378-8-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The write pointer in NVMe ZNS is invalid for a zone in zone state full.
The same also holds true for ZAC/ZBC.
The current behavior for NVMe is to simply propagate the wp reported by
the drive, even for full zones. Since the wp is invalid for a full zone,
the wp reported by the drive may be any value.
The way that the sd_zbc driver handles a full zone is to always report
the wp as zone start + zone len, regardless of what the drive reported.
null_blk also follows this convention.
Do the same for NVMe, so that a BLKREPORTZONE ioctl reports the write
pointer for a full zone in a consistent way, regardless of the interface
of the underlying zoned block device.
blkzone report before patch:
start: 0x000040000, len 0x040000, cap 0x03e000, wptr 0xfffffffffffbfff8
reset:0 non-seq:0, zcond:14(fu) [type: 2(SEQ_WRITE_REQUIRED)]
blkzone report after patch:
start: 0x000040000, len 0x040000, cap 0x03e000, wptr 0x040000 reset:0
non-seq:0, zcond:14(fu) [type: 2(SEQ_WRITE_REQUIRED)]
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The only fabrics target that supports metadata handling through the
separate integrity buffer is RDMA. It is currently usable only if the
size is 8B per block and formatted for protection information. If an
rdma target were to export a namespace with a different format (ex:
4k+64B), the driver will not be able to submit valid read/write commands
for that namespace.
Suppress setting the metadata feature in the namespace so that the
gendisk capacity will be set to 0. This will prevent read/write access
through the block stack, but will continue to allow ioctl passthrough
commands.
Cc: Max Gurtovoy <mgurtovoy@nvidia.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The driver assigned nvme handle isn't persistent across reboots, so is
not enough information to match up where the collisions are occuring.
Add the subsys nqn string to the output so that it can more easily be
identified later.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215099
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With the device tree in place, enable missing drivers as modules, if
possible. PHY driver needs built-in for interrupt support.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa8Mx module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa8MQNL module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa8MQML module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa8Mx is a SOM family using NXP i.MX8M[Q,QL, D] CPU
MBa8Mx is a evaluation mainbord for this SOM
The SOM needs a mainboard, therefore we provide two compatibles here:
"tq,imx8mq-<SOM>" for the module and
"tq,imx8mq-<SOM>-<SBC>" for the module on that mainboard
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa8MxNL is a SOM family using NXP i.MX8MN[Q,QL,DL,S,SL] CPU
MBa8Mx is an evaluation mainbord for this SOM
The SOM needs a mainboard, therefore we provide two compatibles here:
"tq,imx8mn-<SOM>" for the module and
"tq,imx8mn-<SOM>-<SBC>" for mainboards
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa8MxML is a SOM family using NXP i.MX8MM[Q,QL,DL,S,SL] CPU
MBa8Mx is an evaluation mainbord for this SOM
The SOM needs a mainboard, therefore we provide two compatibles here:
"tq,imx8mm-<SOM>" for the module and
"tq,imx8mm-<SOM>-<SBC>" for the module on that mainboard
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the basic dts file for i.MX8ULP EVK board.
Only the necessary devices for minimal system boot up are enabled:
enet, emmc, usb, console uart.
some of the devices' pin status may lost during low power mode,
so additional sleep pinctrl properties are included by default.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the basic dtsi support for i.MX8ULP.
i.MX 8ULP is part of the ULP family with emphasis on extreme
low-power techniques using the 28 nm fully depleted silicon on
insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be
based on asymmetric architecture, however will add a third DSP
domain for advanced voice/audio capability and a Graphics domain
where it is possible to access graphics resources from the
application side or the realtime side.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the dt binding for i.MX8ULP EVK board.
i.MX 8ULP is part of the ULP family with emphasis on extreme
low-power techniques using the 28 nm fully depleted silicon on
insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be
based on asymmetric architecture, however will add a third DSP
domain for advanced voice/audio capability and a Graphics domain
where it is possible to access graphics resources from the
application side or the realtime side.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make use of struct_size() helper instead of an open-coded calculation.
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The Beacon EmbeddedWorks imx8mm development kit has a TD Next 5640
Camera. Enable the OV5640 driver to use the camera.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To use a camera, the CSIS and CSI drivers need to be enabled with
VIDEO_IMX_MEDIA.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The baseboard has support for a TDNext 5640 Camera which
uses an OV5640 connected to a 2-lane CSI2 interface.
With the CSI and mipi_csi2 drivers pointing to an OV5640 camera, the media
pipeline can be configured with the following:
media-ctl --links "'ov5640 1-003c':0->'imx7-mipi-csis.0':0[1]"
The camera and various nodes in the pipeline can be configured for UYVY:
media-ctl -v -V "'ov5640 1-003c':0 [fmt:UYVY8_1X16/640x480 field:none]"
media-ctl -v -V "'csi':0 [fmt:UYVY8_1X16/640x480 field:none]"
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a csi bridge and csis interface that tie together
to allow csi2 capture.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Most of the blk-ctrl reset bits are found in one register, however
there are two bits in offset 8 for pulling the MIPI DPHY out of reset
and one of them needs to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
out of reset or the MIPI_CSI hangs.
Since MIPI_DSI is impacted, add the additional one for MIPI_DSI too.
Fixes: 926e57c065 ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.
Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.
There are no devicetree users in mainline that use the old name,
so just remove the old entry.
Fixes: c201369d4a ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: George Makarov <georgemakarov1@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mxsfb driver handling imx8mq lcdif doesn't yet request the
interconnect bandwidth that's needed at runtime when the description is
present in the DT node.
So remove that description and bring it back when it's supported.
Fixes: ad1abc8a03 ("arm64: dts: imx8mq: Add interconnect for lcdif")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit b00ced38e3 ("ARM: ixp4xx: Delete Avila boardfiles") removed the
last use of <linux/platform_data/pata_ixp4xx_cf.h> but left the header file
in place. Nothing uses this file, delete it now.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 73d04ca5f4 ("ARM: ixp4xx: Delete Intel reference design
boardfiles") removes the definition of the configs MACH_IXDP465 and
MACH_KIXRP435, but misses to remove the configs CPU_IXP43X and CPU_IXP46X
that depend on those removed configs, and hence are dead now.
Fortunately, ./scripts/checkkconfigsymbols.py warns:
MACH_IXDP465
Referencing files: arch/arm/mach-ixp4xx/Kconfig
MACH_KIXRP435
Referencing files: arch/arm/mach-ixp4xx/Kconfig
Remove the dead configs CPU_IXP43X and CPU_IXP46X.
A further quick grep for the name of those two symbols did not show any
use of the two config symbols; so, there are no further clean-up activities
beyond this config removal needed.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a device tree for the Goramo MultiLink IXP425-based
WAN router.
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: openwrt-devel@lists.openwrt.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add devicetree binding for Crux/Crux+ boards from the IOTA family.
These boards have the very same HW configuration as the Orion board
except the usage of Quad/QuadPlus SoC.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ATA IDENTIFY command returns an array of le16 words. Accessing it as a
u16 array triggers the following sparse warning:
drivers/ata/ahci_ceva.c:107:33: warning: invalid assignment: &=
drivers/ata/ahci_ceva.c:107:33: left side has type unsigned short
drivers/ata/ahci_ceva.c:107:33: right side has type restricted __le16
Use a local variable to explicitly cast the id array to __le16 to avoid
this warning.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The TQ-Systems MBa6x mainboard can be used with TQMa6 variants with
i.MX6Q/QP/DL SoCs (TQMa6Q/QP/DL). The TQMa6Q and DL exist in two variants:
The newer variants "A" have a hardware workaround for Erratum ERR006687,
while variants "B" are missing such a workaround, so it needs to be
handled in software. The erratum was fixed in i.MX6QP, so no "A" variant
of the TQMa6QP exists.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device trees for the MBa6x mainboard with TQMa6Q/QP/DL SoMs.
As discussed, all new files are added with GPL-2.0-only license, as they
are too tightly intertwined with the SoC DTSIs imx6dl.dtsi and imx6q.dtsi,
which are GPL-2.0.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The TQMa6x "a" has a workaround for ERR006687 implemented in hardware.
Add the required pinmuxing and related setup to make use of this.
As board DTS files based on the TQMa6x SoMs will define their own
pinmuxing for the FEC ethernet controller as well, we can't apply this
pin group unconditionally; instead, it is the responsibility of the
board DTs derived from imx6qdl-tqma6a.dtsi to include this group.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
JOZ Access Point is imx6ull based device designed for agricultural
cleaning machines.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE file name
- Fix compiler warnings by annotating parisc agp init functions with __init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYa0fHwAKCRD3ErUQojoP
X4auAQDw7wtS4zDGMmEnsLhqkWCPcqnZY0WANi7gCGN7iuJqIQD/ZfqhcBksfbO1
OyrOpcQ6QYZuiADRPPzmPsnTw0t6YwQ=
=kzK0
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is
now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
file name
- Fix compiler warnings by annotating parisc agp init functions with
__init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig"
* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
parisc: Fix "make install" on newer debian releases
parisc/agp: Annotate parisc agp init functions with __init
parisc: Enable sata sil, audit and usb support on 64-bit defconfig
parisc: Fix KBUILD_IMAGE for self-extracting kernel