Newer compilers seem to determine that this variable being uninitialized
isn't a problem, but older compilers (from the RHEL8 era) seem to choke
on it and complain that it could be used uninitialized.
Go ahead and initialize the variable at declaration time to silence
potential compiler warnings.
Fixes: c3d8e0b5de ("ceph: return the real size read when it hits EOF")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
opened_inodes is incremented twice when the same inode is opened twice
with O_RDONLY and O_WRONLY respectively.
To reproduce, run this python script, then check the metrics:
import os
for _ in range(10000):
fd_r = os.open('a', os.O_RDONLY)
fd_w = os.open('a', os.O_WRONLY)
os.close(fd_r)
os.close(fd_w)
Fixes: 1dd8d47081 ("ceph: metrics for opened files, pinned caps and opened inodes")
Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
With asynchronous migrations, the vma state may be several migrations
ahead of the state that matches the request we're capturing.
Address that by introducing an i915_vma_snapshot structure that
can be used to snapshot relevant state at request submission.
In order to make sure we access the correct memory, the snapshots take
references on relevant sg-tables and memory regions.
Also move the capture list allocation out of the fence signaling
critical path and use the CONFIG_DRM_I915_CAPTURE_ERROR define to
avoid compiling in members and functions used for error capture
when they're not used.
Finally, Introduce lockdep annotation.
v4:
- Break out the capture allocation mode change to a separate patch.
v5:
- Fix compilation error in the !CONFIG_DRM_I915_CAPTURE_ERROR case
(kernel test robot)
v6:
- Use #if IS_ENABLED() instead of #ifdef to match driver style.
- Move yet another change of allocation mode to the separate patch.
- Commit message rework due to patch reordering.
v7:
- Adjust for removal of region refcounting.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211129202245.472043-1-thomas.hellstrom@linux.intel.com
First set of fixes for v5.16. Mostly crash and driver initialisation
fixes, the fix for rtw89 being most important.
iwlwifi
* compiler, lockdep and smatch warning fixes
* fix for a rare driver initialisation failure
* fix a memory leak
rtw89
* fix const buffer modification causing a kernel crash
mt76
* fix null pointer access
* fix idr leak
rt2x00
* fix driver initialisation errors, a regression since v5.2-rc1
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmGnNJoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvHDwf/QYH4ZJyVGzMxo86BQ490ePJbe9uK26F0
uhshAiYj8yjv1PvqjVcSEvDDn+BH1lxLd3lKuWeyGfVCR7m2ZLqRFcESq7QyPMhJ
jY6RUxoj6RAjr/A/zxHFDCTgCWu61ccUgdCuXaOtU3HwOlFHkVgKL94E6EbovKD7
ExAS6eN/+Ga3Rr3eIz0inl637PiiQlVy6/ajVu95YBv/FE5dca1BYEPe/RdSkaWC
IRBlqjYNkrQ2nkqLg3x6M5mrZcJEDZJfomywbEx+JpPfm3hlGlUtwlhUS3v9GBBa
qflM3q1TohqFQmuhA8jOy98/o6Vm/HMvdOHzwoGT1DaXNZzeSYGEEA==
=QUeE
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2021-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.16
First set of fixes for v5.16. Mostly crash and driver initialisation
fixes, the fix for rtw89 being most important.
iwlwifi
* compiler, lockdep and smatch warning fixes
* fix for a rare driver initialisation failure
* fix a memory leak
rtw89
* fix const buffer modification causing a kernel crash
mt76
* fix null pointer access
* fix idr leak
rt2x00
* fix driver initialisation errors, a regression since v5.2-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Ido Schimmel <idosch@nvidia.com>
====================
mlxsw: Spectrum-4 preparations
The Spectrum-4 ASIC will support more than 256 ports, unlike existing
ASICs. As such, various device registers were extended with two
additional bits to encode a 10 bit local port. In some cases, new
(Version 2) registers were introduced.
This patchset prepares mlxsw for Spectrum-4 support by encoding local
port in a 'u16' instead of a 'u8' and by extending the definitions of
the various registers to support the extended local port form.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The SMID-V2 register maps Multicast ID (MID) into a list of local ports.
It is a new version of SMID in order to support 1024 bits of local_port.
Add SMID-V2 register and use it instead of SMID.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SFTR-V2 register is used for flooding packet replication.
It is a new version of SFTR in order to support 1024 bits of local_port.
Add SFTR-V2 register and use it instead of SFTR.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 'port_page' field in SBSR to be able to query occupancy of more than
256 ports. The field determines the range of the ports specified in the
'ingress_port_mask' and 'egress_port_mask' bit masks:
>From '256 * port_page' to '256 * port_page + 255'.
For each local port, the appropriate port page is used. A query is never
performed for a port range that spans multiple port pages.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, local_port field is saved as u8, which means that maximum 256
ports can be used.
As preparation for Spectrum-4, which will support more than 256 ports,
local_port field should be extended.
Save local_port as u16 to allow use of additional ports.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Local port 255 has a special meaning in PPCNT register, it is used to
refer to all local ports. This wild card ability is not currently used
by the driver.
Special casing local port 255 in Spectrum-4 systems where it is a valid
port is going to be a problem.
Work around this issue by adding and always setting the 'lp_gl' bit
which instructs the device's firmware to treat this local port like an
ordinary port.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'port_num' field is used to indicate the local port value which can be
assigned to a module.
Increase the field from 8 bits to 10 bits in order to support more than
255 ports.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for 10-bit local ports in device registers by making use of the
MLXSW_ITEM32_LP() macro that was added in the previous patch.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, local_port field uses 8 bits, which means that maximum 256
ports can be used.
As preparation for the next ASIC, which will support more than 256
ports, local_port field should be extended to 10 bits.
It is not possible to use 10 consecutive bits in all registers, and
therefore, the field is split into 2 fields:
1. local_port - the existing 8 bits, represent LSB of the extended
field.
2. lp_msb - extra 2 bits, represent MSB of the extended field.
To avoid complex programming when reading/writing local_port, add a
dedicated macro which creates get and set functions which handle both parts
of local_port.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The functions mlxsw_reg_sfd_uc_unpack() and
mlxsw_reg_sfd_uc_lag_unpack() are not used. Remove them.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add latest verified version of Nvidia Spectrum-family switch firmware,
for Spectrum (13.2010.1006), Spectrum-2 (29.2010.1006) and
Spectrum-3 (30.2010.1006).
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmGnF5oACgkQSD+KveBX
+j7LuQgAuoobAh+fB81CZOxurprZ6E83h8DFOeO0fpvkjye5C6toYnnzxkXPOkCC
FU/Vvsdozn3OTm5kR2glEDSJusezE+bl4KcpU3WX3RNxUQQIMhFt7+GODsIa3WVB
mc0jC6sXH+i7RBJD2IeF4HSELK5PGWjgzn1OFmDhILbngjvxWHxCoP3K+5cia6o7
p8qnP8TyBFyD1vSNqgnPdN4edsavriDtwlO6wvRKDTBecIYHj61nNcFD6GwJCb+j
v6Jp6P3rc5xGWoiZq3k1oi/NUPpfrbRn5SJ+e6VBP+P2JGuzNsY0Y8P+eoX5YhVO
mtfWnFRxLJMpbInxNbUq4cJEpmVtoA==
=lnKZ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2021-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-11-30
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2021-11-30
This series contains updates to iavf driver only.
Patryk adds a debug message when MTU is changed.
Grzegorz adds messaging when transitioning in and out of multicast
promiscuous mode.
Jake returns correct error codes for iavf_parse_cls_flower().
Jedrzej adds messaging for when the driver is removed and refactors
struct usage to take less memory. He also adjusts ethtool statistics to
only display information on active queues.
Tony allows for user to specify the RSS hash.
Karen resolves some static analysis warnings, corrects format specifiers,
and rewords a message to come across as informational.
v2:
- Dropped patch 1 (for net) and 5
- Change MTU message from info to debug
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-11-30
This series contains updates to ice driver only.
Shiraz corrects assignment of boolean variable and removes an unused
enum.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-11-30
Jesper Dangaard Brouer says:
Changes to fix and enable XDP metadata to a specific Intel driver igc.
Tested with hardware i225 that uses driver igc, while testing AF_XDP
access to metadata area.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Behún says:
====================
mv88e6xxx fixes (mainly 88E6393X family)
sending v2 of these fixes.
Original cover letter:
So I managed to discovered how to fix inband AN for 2500base-x mode on
88E6393x (Amethyst) family.
This series fixes application of erratum 4.8, adds fix for erratum 5.2,
adds support for completely disablign SerDes receiver / transmitter,
fixes inband AN for 2500base-x mode by using 1000base-x mode and simply
changing frequeny to 3.125 GHz, all this for 88E6393X.
The last commit fixes linking when link partner has AN disabled and the
device invokes the AN bypass feature. Currently we fail to link in this
case.
Changes since v1:
- fixed wrong operator in patch 3 (thanks Russell)
- added more comments about why BMCR_ANENABLE is used in patch 6 (thanks
Russell)
- updated some return statements from
if (something)
return func();
return 0;
to
if (something)
err = func();
return err;
(err is set to 0 before the condition)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Function mv88e6xxx_serdes_pcs_get_state() currently does not report link
up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit
is not set, which testing shows is the case for when auto-negotiation
was bypassed (we have AN enabled but link partner does not).
An example of such link partner is Marvell 88X3310 PHY, when put into
the mode where host interface changes between 10gbase-r, 5gbase-r,
2500base-x and sgmii according to copper speed. The 88X3310 does not
enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not
link with it.
Fix this.
Fixes: a5a6858b79 ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inband AN is broken on Amethyst in 2500base-x mode when set by standard
mechanism (via cmode).
(There probably is some weird setting done by default in the switch for
this mode that make it cycle in some state or something, because when
the peer is the mvneta controller, it receives link change interrupts
every ~0.3ms, but the link is always down.)
Get around this by configuring the PCS mode to 1000base-x (where inband
AN works), and then changing the SerDes frequency while SerDes
transmitter and receiver are disabled, before enabling SerDes PHY. After
disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid
confusing the device (if we leave it at 1000base-x PCS mode but with
different frequency, and then change cmode to sgmii, the device won't
change the frequency because it thinks it already has the correct one).
The register which changes the frequency is undocumented. I discovered
it by going through all registers in the ranges 4.f000-4.f100 and
1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x,
5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't
make sense (the value was the same for modes which have different
frequency). The result of this was:
reg sgmii 1000base-x 2500base-x 5gbase-r 10gbase-r usxgmii
04.f002 005b 0058 0059 005c 005d 005f
04.f076 3000 0000 1000 4000 5000 7000
04.f07c 0950 0950 1850 0550 0150 0150
1e.8000 0059 0059 0058 0055 0051 0051
1e.8140 0e20 0e20 0e28 0e21 0e42 0e42
Register 04.f002 is the documented Port Operational Confiuration
register, it's last 3 bits select PCS type, so changing this register
also changes the frequency to the appropriate value.
Registers 04.f076 and 04.f07c are not writable.
Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8
changed SerDes frequency to 3.125 GHz, while leaving the value of PCS
mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation
started working correctly.
(I didn't try anything with register 1e.8140 since 1e.8000 solved the
problem.)
Since I don't have documentation for this register 1e.8000.3:0, I am
using the constants without names, but my hypothesis is that this
register selects PHY frequency. If in the future I have access to an
oscilloscope able to handle these frequencies, I will try to test this
hypothesis.
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r
mode, some undocumented registers need to be written some special
values.
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Save power on 88E6393X by disabling SerDes receiver and transmitter
after SerDes is SerDes is disabled.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: David S. Miller <davem@davemloft.net>
The check for lane is unnecessary, since the function is called only
with allowed lane argument.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied
every time before SerDes is powered on.
Split the code for erratum 4.8 into separate function and call it in
mv88e6393x_serdes_power().
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
All M1 Mac devices have 2 SoC connected USB-C ports and use cd321x USB
type C port switch and power deliver controllers. I2c bus and addresses
configuration are for all devices equal.
The iMac (24-inch, 2021) has a configuration with 2 additional USB-C
ports (j456) using two additional cd321x controllers.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Apple M1 has at least 5 i2c controllers. i2c0, i2c1 and i2c3 are used
on all M1 Mac devices. The 2020 Mac Mini uses i2c2 and the 13-inch
MacBook Pro uses i2c2 and i2c4.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds support for following Apple M1 devices:
- MacBook Pro (13-inch, M1, 2020)
- MacBook Air (M1, 2020)
- iMac (24-inch 2021)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.
Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.
This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.
V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 4a8d79901d ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
(cherry picked from commit c7c90b0b84)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The spi-peripheral-props.yaml schema contains peripheral-specific
properties for SPI controllers that should be present in the peripheral
node. Add a reference to that so its constraints are followed.
additionalProperties: false cannot be used since it marks the controller
properties as unknown. Use unevaluatedProperties: false instead. This
has the side effect of allowing extra properties that are not specified
in the schema. The alternative is to list all the controller properties
in this schema but that would mean every peripheral binding would have
to repeat the same set of properties for each controller.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211109181911.2251-4-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi-peripheral-props.yaml schema contains peripheral-specific
properties for SPI controllers that should be present in the peripheral
node. Move peripheral-specific properties to a separate file and refer
to it in spi-peripheral-props.yaml.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211109181911.2251-3-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many SPI controllers need to add properties to peripheral devices. This
could be the delay in clock or data lines, etc. These properties are
controller specific but need to be defined in the peripheral node
because they are per-peripheral and there can be multiple peripherals
attached to a controller.
If these properties are not added to the peripheral binding, then the
dtbs check emits a warning. But these properties do not make much sense
in the peripheral binding because they are controller-specific and they
will just pollute every peripheral binding. So this binding is added to
collect all such properties from all such controllers. Peripheral
bindings should simply refer to this binding and they should be rid of
the warnings.
There are some limitations with this approach. Firstly, there is no way
to specify required properties. The schema contains properties for all
controllers and there is no way to know which controller is being used.
Secondly, there is no way to restrict additional properties. Since this
schema will be used with an allOf operator, additionalProperties needs
to be true. In addition, the peripheral schema will have to set
unevaluatedProperties: false.
Despite these limitations, this appears to be the best solution to this
problem that doesn't involve modifying existing tools or schema specs.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211109181911.2251-2-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the rpmh regulators found in PM8450 PMIC
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211201072515.3968843-3-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MVC module has a per channel control bit, based on which it decides
to apply channel specific volume/mute settings. When per channel control
bit is enabled (which is the default HW configuration), all MVC channel
volume/mute can be independently controlled. If the control is disabled,
channel-0 volume/mute setting is applied by HW to all remaining channels.
Thus add support to leverage this HW feature by exposing master controls
for volume/mute.
With this, now there are per channel and master volume/mute controls.
Users need to just use controls which are suitable for their applications.
The per channel control enable/disable is mananged in driver and hidden
from users, so that they need to just worry about respective volume/mute
controls.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1638278605-28225-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
wsa881x_set_port() and wsa881x_put_pa_gain() currently returns zero eventhough
it changes the value. Fix this, so that change notifications are sent
correctly.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
wcd934x_compander_set() currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes: 1cde8b8223 ("ASoC: wcd934x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently each channel is added as list to dai channel list, however
there is danger of adding same channel to multiple dai channel list
which endups corrupting the other list where its already added.
This patch ensures that the channel is actually free before adding to
the dai channel list and also ensures that the channel is on the list
before deleting it.
This check was missing previously, and we did not hit this issue as
we were testing very simple usecases with sequence of amixer commands.
Fixes: a70d924575 ("ASoC: wcd934x: add capture dapm widgets")
Fixes: dd9eb19b56 ("ASoC: wcd934x: add playback dapm widgets")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
msm_routing_put_audio_mixer() can return incorrect value in various scenarios.
scenario 1:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0
return value is 0 instead of 1 eventhough value was changed
scenario 2:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
return value is 1 instead of 0 eventhough the value was not changed
scenario 3:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0
return value is 1 instead of 0 eventhough the value was not changed
Fix this by adding checks, so that change notifications are sent correctly.
Fixes: e3a33673e8 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130163110.5628-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Required for devices trying to use pinctrl devices as interrupt
controller.
Fixes: 0a8282b831 ("arm64: apple: Add pinctrl nodes")
Signed-off-by: Janne Grunau <j@jannau.net>
Cc: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
The intention was to have a SoC-specific and base compatible string
to allow forward compatibility and SoC specific quirks,
Fixes: df7c4a8c1b ("dt-bindings: i2c: Add Apple I2C controller bindings")
Signed-off-by: Janne Grunau <j@jannau.net>
Cc: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Hector Martin <marcan@marcan.st>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Change NAND flash MTD partition in device tree after implementation of
UBI and UBIFS. "u-boot" partition remain for raw u-boot image, but "root"
partition is use for UBI image containing all other components.
Signed-off-by: Sin Hui Kho <sin.hui.kho@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Renaming lz4_0padding to zero_padding globally since LZMA and later
algorithms also need that.
Link: https://lore.kernel.org/r/20211112160935.19394-1-jnhuang95@gmail.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
First of all, it's obvious that different versions can't be provided
simultaneously. Hence, versions can't be bit masks.
Second, due to above we have to mask out the version field in the flags
and only that can be evaluated against the certain version.
Clarify all above by:
- introducing GPIO_REG_OFFSET_V1 and GPIO_REG_OFFSET_MASK
- replacing conditional to mask out bits and compare to a version
Luckily there is no functional change, so no need to backport this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
When running a KVM guest hosted on an ARMv8.7 machine, the host
kernel complains that it doesn't know about the architected number
of events.
Fix it by adding the PMUver code corresponding to PMUv3 for ARMv8.7.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211126115533.217903-1-maz@kernel.org
The ML IOH driver is very similar to the PCH driver. To make it more
similar, tweak the whitespace in ioh_gpio_direction_output() and
ioh_gpio_direction_input(). No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>