Commit graph

1,105,074 commits

Author SHA1 Message Date
Maxime Ripard
4280e1a0ba
drm/kirin: dsi: Adjust probe order
Without proper care and an agreement between how DSI hosts and devices
drivers register their MIPI-DSI entities and potential components, we can
end up in a situation where the drivers can never probe.

Most drivers were taking evasive maneuvers to try to workaround this,
but not all of them were following the same conventions, resulting in
various incompatibilities between DSI hosts and devices.

Now that we have a sequence agreed upon and documented, let's convert
kirin to it.

Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-21-maxime@cerno.tech
2021-10-27 22:07:58 +02:00
Maxime Ripard
4d77688ff2
drm/bridge: tc358775: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-20-maxime@cerno.tech
2021-10-27 22:07:58 +02:00
Maxime Ripard
526dcedf87
drm/bridge: tc358775: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-19-maxime@cerno.tech
2021-10-27 22:07:58 +02:00
Maxime Ripard
c3b75d4734
drm/bridge: sn65dsi86: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-18-maxime@cerno.tech
2021-10-27 22:07:58 +02:00
Maxime Ripard
77d2a71b94
drm/bridge: sn65dsi86: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-17-maxime@cerno.tech
2021-10-27 22:07:58 +02:00
Maxime Ripard
6ef7ee4876
drm/bridge: sn65dsi83: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-16-maxime@cerno.tech
2021-10-27 22:07:57 +02:00
Maxime Ripard
6cae235e9c
drm/bridge: sn65dsi83: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge but don't remove its driver.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-15-maxime@cerno.tech
2021-10-27 22:07:57 +02:00
Maxime Ripard
c05f1a4e2c
drm/bridge: sn65dsi83: Fix bridge removal
Commit 24417d5b0c ("drm/bridge: ti-sn65dsi83: Implement .detach
callback") moved the unregistration of the bridge DSI device and bridge
itself to the detach callback.

While this is correct for the DSI device detach and unregistration, the
bridge is added in the driver probe, and should thus be removed as part
of its remove callback.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Fixes: 24417d5b0c ("drm/bridge: ti-sn65dsi83: Implement .detach callback")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-14-maxime@cerno.tech
2021-10-27 22:07:57 +02:00
Maxime Ripard
7abbc26fd6
drm/bridge: ps8640: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-13-maxime@cerno.tech
2021-10-27 22:07:57 +02:00
Maxime Ripard
fe93ae800e
drm/bridge: ps8640: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device on removal.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-12-maxime@cerno.tech
2021-10-27 22:07:57 +02:00
Maxime Ripard
4a46ace5ac
drm/bridge: lt9611uxc: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-11-maxime@cerno.tech
2021-10-27 22:07:57 +02:00
Maxime Ripard
293ada7b05
drm/bridge: lt9611uxc: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-10-maxime@cerno.tech
2021-10-27 22:07:57 +02:00
Maxime Ripard
fef604db23
drm/bridge: lt9611: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-9-maxime@cerno.tech
2021-10-27 22:07:57 +02:00
Maxime Ripard
b91df118e4
drm/bridge: lt9611: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-8-maxime@cerno.tech
2021-10-27 22:07:56 +02:00
Maxime Ripard
d89078c37b
drm/bridge: lt8912b: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-7-maxime@cerno.tech
2021-10-27 22:07:56 +02:00
Maxime Ripard
1fdbf66e3d
drm/bridge: lt8912b: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-6-maxime@cerno.tech
2021-10-27 22:07:56 +02:00
Maxime Ripard
49e61bee26
drm/bridge: anx7625: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-5-maxime@cerno.tech
2021-10-27 22:07:56 +02:00
Maxime Ripard
25a390a9aa
drm/bridge: anx7625: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-4-maxime@cerno.tech
2021-10-27 22:07:56 +02:00
Maxime Ripard
864c49a31d
drm/bridge: adv7511: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-3-maxime@cerno.tech
2021-10-27 22:07:56 +02:00
Maxime Ripard
ee9418808b
drm/bridge: adv7533: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-2-maxime@cerno.tech
2021-10-27 22:07:56 +02:00
Vincent Whitchurch
890d335613 virtio-ring: fix DMA metadata flags
The flags are currently overwritten, leading to the wrong direction
being passed to the DMA unmap functions.

Fixes: 72b5e89587 ("virtio-ring: store DMA metadata in desc_extra for split virtqueue")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20211026133100.17541-1-vincent.whitchurch@axis.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
2021-10-27 15:54:34 -04:00
Trond Myklebust
01d29f87fc NFSv4: Fix a regression in nfs_set_open_stateid_locked()
If we already hold open state on the client, yet the server gives us a
completely different stateid to the one we already hold, then we
currently treat it as if it were an out-of-sequence update, and wait for
5 seconds for other updates to come in.
This commit fixes the behaviour so that we immediately start processing
of the new stateid, and then leave it to the call to
nfs4_test_and_free_stateid() to decide what to do with the old stateid.

Fixes: b4868b44c5 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-10-27 15:24:46 -04:00
Adrian Hunter
624ff63abf perf intel-pt: Support itrace d+o option to direct debug log to stdout
It can be useful to see debug output in between normal output.

Add support for AUXTRACE_LOG_FLG_USE_STDOUT to Intel PT.

Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20211027080334.365596-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27 16:21:01 -03:00
Adrian Hunter
4b2b2c6a7d perf auxtrace: Add itrace d+o option to direct debug log to stdout
It can be useful to see debug output in between normal output.

Add 'o' to the flags of debug option 'd', so that '--itrace=d+o' can
specify output of the debug log to stdout.

Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20211027080334.365596-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27 16:20:45 -03:00
Adrian Hunter
c3afd6e50f perf dlfilter: Add dlfilter-show-cycles
Add a new dlfilter to show cycles.

Cycle counts are accumulated per CPU (or per thread if CPU is not recorded)
from IPC information, and printed together with the change since the last
print, at the start of each line. Separate counts are kept for branches,
instructions or other events.

Note also, the itrace A option can be useful to provide higher granularity
cycle information.

Example:

  $ perf record -e intel_pt/cyc/u uname
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.044 MB perf.data ]
  $ perf script --itrace=A --call-trace --dlfilter dlfilter-show-cycles.so --deltatime | head
         0                   perf-exec  8509 [001]     0.000000000:  psb offs: 0
         0                   perf-exec  8509 [001]     0.000000000:  cbr: 42 freq: 4219 MHz (156%)
       833        833            uname  8509 [001]     0.000047689: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )        _start
       833                       uname  8509 [001]     0.000003261: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )            _dl_start
      2015       1182            uname  8509 [001]     0.000000282: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )            _dl_start
      2676        661            uname  8509 [001]     0.000002629: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )            _dl_start
      3612        936            uname  8509 [001]     0.000001232: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )            _dl_start
      4579        967            uname  8509 [001]     0.000002519: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )            _dl_start
      6145       1566            uname  8509 [001]     0.000001050: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )                _dl_setup_hash
      6239         94            uname  8509 [001]     0.000000023: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )                _dl_sysdep_start

Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20211027080334.365596-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27 16:20:30 -03:00
Adrian Hunter
f2b91386ff perf intel-pt: Support itrace A option to approximate IPC
Normally, for cycle-acccurate mode, IPC values are an exact number of
instructions and cycles. Due to the granularity of timestamps, that happens
only when a CYC packet correlates to the event.

Support the itrace 'A' option, to use instead, the number of cycles
associated with the current timestamp. This provides IPC information for
every change of timestamp, but at the expense of accuracy. Due to the
granularity of timestamps, the actual number of cycles increases even
though the cycles reported does not. The number of instructions is known,
but if IPC is reported, cycles can be too low and so IPC is too high. Note
that inaccuracy decreases as the period of sampling increases i.e. if the
number of cycles is too low by a small amount, that becomes less
significant if the number of cycles is large.

Furthermore, it can be used in conjunction with dlfilter-show-cycles.so
to provide higher granularity cycle information.

Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20211027080334.365596-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27 16:20:18 -03:00
Adrian Hunter
b6778fe1bb perf auxtrace: Add itrace A option to approximate IPC
Add an option to specify that synthesized IPC can be approximate, rather
than completely accurate.

Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20211027080334.365596-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27 16:20:08 -03:00
Adrian Hunter
cf14013b6c perf auxtrace: Add missing Z option to ITRACE_HELP
ITRACE_HELP is used by perf commands to display help text for the --itrace
option. Add missing Z option.

Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20211027080334.365596-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27 16:19:58 -03:00
Arnd Bergmann
f25c0515c5 net: sched: gred: dynamically allocate tc_gred_qopt_offload
The tc_gred_qopt_offload structure has grown too big to be on the
stack for 32-bit architectures after recent changes.

net/sched/sch_gred.c:903:13: error: stack frame size (1180) exceeds limit (1024) in 'gred_destroy' [-Werror,-Wframe-larger-than]
net/sched/sch_gred.c:310:13: error: stack frame size (1212) exceeds limit (1024) in 'gred_offload' [-Werror,-Wframe-larger-than]

Use dynamic allocation per qdisc to avoid this.

Fixes: 50dc9a8572 ("net: sched: Merge Qdisc::bstats and Qdisc::cpu_bstats data types")
Fixes: 67c9e6270f ("net: sched: Protect Qdisc::bstats with u64_stats")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20211026100711.nalhttf6mbe6sudx@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27 12:06:52 -07:00
Wang Hai
6f7c886911 usbnet: fix error return code in usbnet_probe()
Return error code if usb_maxpacket() returns 0 in usbnet_probe()

Fixes: 397430b50a ("usbnet: sanity check for maxpacket")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27 12:06:15 -07:00
Andrii Nakryiko
03e6a7a940 Merge branch 'selftests/bpf: parallel mode improvement'
Yucong Sun says:

====================

Several patches to improve parallel execution mode, updating vmtest.sh
and fixed two previously dropped patches according to feedback.
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2021-10-27 11:59:43 -07:00
Yucong Sun
e1ef62a4dd selftests/bpf: Adding a namespace reset for tc_redirect
This patch delete ns_src/ns_dst/ns_redir namespaces before recreating
them, making the test more robust.

Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211025223345.2136168-5-fallentree@fb.com
2021-10-27 11:59:02 -07:00
Yucong Sun
9e7240fb2d selftests/bpf: Fix attach_probe in parallel mode
This patch makes attach_probe uses its own method as attach point,
avoiding conflict with other tests like bpf_cookie.

Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211025223345.2136168-4-fallentree@fb.com
2021-10-27 11:59:02 -07:00
Yucong Sun
547208a386 selfetests/bpf: Update vmtest.sh defaults
Increase memory to 4G, 8 SMP core with host cpu passthrough. This
make it run faster in parallel mode and more likely to succeed.

Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211025223345.2136168-2-fallentree@fb.com
2021-10-27 11:58:44 -07:00
Jakub Kicinski
4796e2518a Merge branch 'two-reverts-to-calm-down-devlink-discussion'
Leon Romanovsky says:

====================
Two reverts to calm down devlink discussion

Two reverts as was discussed in [1], fast, easy and wrong in long run
solution to syzkaller bug [2].

[1] https://lore.kernel.org/all/20211026120234.3408fbcc@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com
[2] https://lore.kernel.org/netdev/000000000000af277405cf0a7ef0@google.com/
====================

Link: https://lore.kernel.org/r/cover.1635276828.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27 11:58:11 -07:00
Leon Romanovsky
c5e0321e43 Revert "devlink: Remove not-executed trap policer notifications"
This reverts commit 22849b5ea5 as it
revealed that mlxsw and netdevsim (copy/paste from mlxsw) reregisters
devlink objects during another devlink user triggered command.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27 11:58:07 -07:00
Leon Romanovsky
fb9d19c2d8 Revert "devlink: Remove not-executed trap group notifications"
This reverts commit 8bbeed4858 as it
revealed that mlxsw and netdevsim (copy/paste from mlxsw) reregisters
devlink objects during another devlink user triggered command.

Fixes: 22849b5ea5 ("devlink: Remove not-executed trap policer notifications")
Reported-by: syzbot+93d5accfaefceedf43c1@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27 11:58:07 -07:00
Chunfeng Yun
7ddae8c779 usb: mtu3: enable wake-up interrupt after runtime_suspend called
Use the new API dev_pm_set_dedicated_wake_irq_reverse() to request
dedicated wake-up interrupt, due to we want to enable the wake IRQ
after running ->runtime_suspend().

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-27 20:49:32 +02:00
Chunfeng Yun
0537282d3b usb: xhci-mtk: enable wake-up interrupt after runtime_suspend called
Use new function dev_pm_set_dedicated_wake_irq_reverse() to request
dedicated wake-up interrupt, due to we want to enable the wake IRQ
after running ->runtime_suspend().

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-27 20:49:32 +02:00
Chunfeng Yun
259714100d PM / wakeirq: support enabling wake-up irq after runtime_suspend called
When the dedicated wake IRQ is level trigger, and it uses the
device's low-power status as the wakeup source, that means if the
device is not in low-power state, the wake IRQ will be triggered
if enabled; For this case, need enable the wake IRQ after running
the device's ->runtime_suspend() which make it enter low-power state.

e.g.
Assume the wake IRQ is a low level trigger type, and the wakeup
signal comes from the low-power status of the device.
The wakeup signal is low level at running time (0), and becomes
high level when the device enters low-power state (runtime_suspend
(1) is called), a wakeup event at (2) make the device exit low-power
state, then the wakeup signal also becomes low level.

                ------------------
               |           ^     ^|
----------------           |     | --------------
 |<---(0)--->|<--(1)--|   (3)   (2)    (4)

if enable the wake IRQ before running runtime_suspend during (0),
a wake IRQ will arise, it causes resume immediately;
it works if enable wake IRQ ( e.g. at (3) or (4)) after running
->runtime_suspend().

This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to
optionally support enabling wake IRQ after running ->runtime_suspend().

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-27 20:49:32 +02:00
Krzysztof Wilczyński
fd1ae23b49 PCI: Prefer 'unsigned int' over bare 'unsigned'
The bare "unsigned" type implicitly means "unsigned int", but the preferred
coding style is to use the complete type name.

Update the bare use of "unsigned" to the preferred "unsigned int".

No change to functionality intended.

See a1ce18e4f9 ("checkpatch: warn on bare unsigned or signed declarations
without int").

Link: https://lore.kernel.org/r/20211013014136.1117543-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-27 13:41:22 -05:00
Rafael J. Wysocki
031eda1840 Update devfreq next for v5.16
Detailed description for this pull request
 1. Add minor update for exynos-ppmu devfreq-event driver
 - Devicetree naming convention requires the device node manes
 to use hyphens instead of underscope. In order to support
 this requirement, changes the code with hyphens.
 - Simplify parsing event-type from devicetree without behavior changes
 
 2. Strengthen check for freq_table in devfreq core
 - Check whether both freq_table is not NULL and size of freq_table
 is not zero in order to prevent the error by mistake of devfreq driver
 developer.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEsSpuqBtbWtRe4rLGnM3fLN7rz1MFAmF449YWHGN3MDAuY2hv
 aUBzYW1zdW5nLmNvbQAKCRCczd8s3uvPU9dlD/9hiVqplSwtW2BKWPkkedJLnWFp
 ji+OrCzuIk4HK8U5Yzejs6qoU4ZhQd7W6jtLvaN8ptJ1lgbe8x3IYC9WBqjBNHrC
 Vc0Rl+8mDB1AzAHk4veQN0JQlmcm+0CoAx00CdjrL8pFcxdr8AKIZ0fdK5LFo5Ks
 GOEa/iCRqpCBWXoA5PIVENbD8W57ZUOTaLoaHHJbBmX04E6lWJk/u+NKXWhJNdxn
 awKpA36tK3wYIbtJuAqv2fWyAIOaHRPUmP0KDJBAqWYMRtQ7LzTrPfDdzmZbI5fX
 wg0UFu2H9tmH7fuOK4ZjSLIqwyzljG3Vj3NxevPcnBF1IQ2rKLETtZ0zy6pONFSK
 396ZV+LaRjln0dMwjWJrYLsICqiCxGIDhcjSfCA8+2fFAifkeE6hyGhmt7FAcKoc
 LqDeE3DAhdAT4hGEo35s8HislMC/svnA/WmrY2DzRGXC9O7qKqFrPsrGiGtjwrGo
 vEsyIqLvmsY33GIJx66B/kdkhqjkV76qWS+cW+QCBdvp9qTSCwCMI5IjZZpdSMf8
 wZtWUe2neNCBDSY0B5q68+Zad/D40+cvckGtac13JGh3qDQpvZBTM6uGxfT09rxf
 fk7rlY3Hs9Lwq2W1uFEVTG9PROCNd0GBaQwr4ZvB/iaIBFR0woiqC098BZKC8Fmj
 TTaZP8Gf23b1bcJZ7A==
 =KYy7
 -----END PGP SIGNATURE-----

Merge tag 'devfreq-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux

Pull devfreq updates for v5.16 from Chanwoo Choi:

"1. Minor update for exynos-ppmu devfreq-event driver

  - Devicetree naming convention requires the device node names
    to use hyphens instead of underlines. In order to support
    this requirement, changes the code with hyphens.

  - Simplify parsing event-type from devicetree without behavior
    changes.

 2. Strengthen check for freq_table in devfreq core

  - Check whether both freq_table is not NULL and size of freq_table
    is not zero in order to prevent the error by mistake of devfreq
    driver developer.

* tag 'devfreq-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
  PM / devfreq: Strengthen check for freq_table
  devfreq: exynos-ppmu: simplify parsing event-type from DT
  devfreq: exynos-ppmu: use node names with hyphens
2021-10-27 20:40:17 +02:00
Rafael J. Wysocki
d5a8fb654c perf: qcom_l2_pmu: ACPI: Use ACPI_COMPANION() directly
The ACPI_HANDLE() macro is a wrapper arond the ACPI_COMPANION()
macro and the ACPI handle produced by the former comes from the
ACPI device object produced by the latter, so it is way more
straightforward to evaluate the latter directly instead of passing
the handle produced by the former to acpi_bus_get_device().

Modify l2_cache_pmu_probe_cluster() accordingly (no intentional
functional impact).

While at it, rename the ACPI device pointer to adev for more
clarity.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-27 20:38:22 +02:00
Christoph Hellwig
06606646af ACPI: APEI: mark apei_hest_parse() static
apei_hest_parse() is only used in hest.c, so mark it static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
[ rjw: Minor subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-27 20:34:47 +02:00
Shuai Xue
bf7fc0c369 ACPI: APEI: EINJ: Relax platform response timeout to 1 second
When injecting an error into the platform, the OSPM executes an
EXECUTE_OPERATION action to instruct the platform to begin the injection
operation. And then, the OSPM busy waits for a while by continually
executing CHECK_BUSY_STATUS action until the platform indicates that the
operation is complete. More specifically, the platform is limited to
respond within 1 millisecond right now. This is too strict for some
platforms.

For example, in Arm platform, when injecting a Processor Correctable error,
the OSPM will warn:
    Firmware does not respond in time.

And a message is printed on the console:
    echo: write error: Input/output error

We observe that the waiting time for DDR error injection is about 10 ms and
that for PCIe error injection is about 500 ms in Arm platform.

In this patch, we relax the response timeout to 1 second.

Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-27 20:33:26 +02:00
Thomas Zimmermann
b9971e549a drm: Link CMA framebuffer helpers into KMS helper library
Linking the CMA framebuffer helpers into a CMA helper library in
commit 4b2b5e142f ("drm: Move GEM memory managers into modules")
results in linker errors:

  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.o: \
	  in function `drm_fb_cma_get_gem_obj': \
	  drivers/gpu/drm/drm_fb_cma_helper.c:46: undefined reference \
	  to `drm_gem_fb_get_obj'
  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:46: \
	  undefined reference to `drm_gem_fb_get_obj'
  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:46: \
	  undefined reference to `drm_gem_fb_get_obj'
  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.o: in \
	  function `drm_fb_cma_sync_non_coherent': \
	  drivers/gpu/drm/drm_fb_cma_helper.c:133: undefined reference \
	  to `drm_atomic_helper_damage_iter_init'
  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:135: \
	  undefined reference to `drm_atomic_helper_damage_iter_next'

Link the CMA framebuffer helpers into the KMS helper library to
fix the problem.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 4b2b5e142f ("drm: Move GEM memory managers into modules")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20211026175700.27664-1-tzimmermann@suse.de
2021-10-27 20:21:44 +02:00
Alexei Starovoitov
f9d532fc5d Merge branch 'bpf: use 32bit safe version of u64_stats'
Eric Dumazet says:

====================

From: Eric Dumazet <edumazet@google.com>

Two first patches fix bugs added in 5.1 and 5.5

Third patch replaces the u64 fields in struct bpf_prog_stats
with u64_stats_t ones to avoid possible sampling errors,
in case of load/store stearing.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-10-27 11:13:53 -07:00
Eric Dumazet
61a0abaee2 bpf: Use u64_stats_t in struct bpf_prog_stats
Commit 316580b69d ("u64_stats: provide u64_stats_t type")
fixed possible load/store tearing on 64bit arches.

For instance the following C code

stats->nsecs += sched_clock() - start;

Could be rightfully implemented like this by a compiler,
confusing concurrent readers a lot:

stats->nsecs += sched_clock();
// arbitrary delay
stats->nsecs -= start;

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-4-eric.dumazet@gmail.com
2021-10-27 11:13:52 -07:00
Eric Dumazet
d979617aa8 bpf: Fixes possible race in update_prog_stats() for 32bit arches
It seems update_prog_stats() suffers from same issue fixed
in the prior patch:

As it can run while interrupts are enabled, it could
be re-entered and the u64_stats syncp could be mangled.

Fixes: fec56f5890 ("bpf: Introduce BPF trampoline")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-3-eric.dumazet@gmail.com
2021-10-27 11:13:52 -07:00
Eric Dumazet
f941eadd8d bpf: Avoid races in __bpf_prog_run() for 32bit arches
__bpf_prog_run() can run from non IRQ contexts, meaning
it could be re entered if interrupted.

This calls for the irq safe variant of u64_stats_update_{begin|end},
or risk a deadlock.

This patch is a nop on 64bit arches, fortunately.

syzbot report:

WARNING: inconsistent lock state
5.12.0-rc3-syzkaller #0 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
udevd/4013 [HC0[0]:SC0[0]:HE1:SE1] takes:
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: sk_filter include/linux/filter.h:867 [inline]
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: do_one_broadcast net/netlink/af_netlink.c:1468 [inline]
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: netlink_broadcast_filtered+0x27c/0x4fc net/netlink/af_netlink.c:1520
{IN-SOFTIRQ-W} state was registered at:
  lock_acquire.part.0+0xf0/0x41c kernel/locking/lockdep.c:5510
  lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5483
  do_write_seqcount_begin_nested include/linux/seqlock.h:520 [inline]
  do_write_seqcount_begin include/linux/seqlock.h:545 [inline]
  u64_stats_update_begin include/linux/u64_stats_sync.h:129 [inline]
  bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline]
  bpf_prog_run_clear_cb+0x1bc/0x270 include/linux/filter.h:755
  run_filter+0xa0/0x17c net/packet/af_packet.c:2031
  packet_rcv+0xc0/0x3e0 net/packet/af_packet.c:2104
  dev_queue_xmit_nit+0x2bc/0x39c net/core/dev.c:2387
  xmit_one net/core/dev.c:3588 [inline]
  dev_hard_start_xmit+0x94/0x518 net/core/dev.c:3609
  sch_direct_xmit+0x11c/0x1f0 net/sched/sch_generic.c:313
  qdisc_restart net/sched/sch_generic.c:376 [inline]
  __qdisc_run+0x194/0x7f8 net/sched/sch_generic.c:384
  qdisc_run include/net/pkt_sched.h:136 [inline]
  qdisc_run include/net/pkt_sched.h:128 [inline]
  __dev_xmit_skb net/core/dev.c:3795 [inline]
  __dev_queue_xmit+0x65c/0xf84 net/core/dev.c:4150
  dev_queue_xmit+0x14/0x18 net/core/dev.c:4215
  neigh_resolve_output net/core/neighbour.c:1491 [inline]
  neigh_resolve_output+0x170/0x228 net/core/neighbour.c:1471
  neigh_output include/net/neighbour.h:510 [inline]
  ip6_finish_output2+0x2e4/0x9fc net/ipv6/ip6_output.c:117
  __ip6_finish_output net/ipv6/ip6_output.c:182 [inline]
  __ip6_finish_output+0x164/0x3f8 net/ipv6/ip6_output.c:161
  ip6_finish_output+0x2c/0xb0 net/ipv6/ip6_output.c:192
  NF_HOOK_COND include/linux/netfilter.h:290 [inline]
  ip6_output+0x74/0x294 net/ipv6/ip6_output.c:215
  dst_output include/net/dst.h:448 [inline]
  NF_HOOK include/linux/netfilter.h:301 [inline]
  NF_HOOK include/linux/netfilter.h:295 [inline]
  mld_sendpack+0x2a8/0x7e4 net/ipv6/mcast.c:1679
  mld_send_cr net/ipv6/mcast.c:1975 [inline]
  mld_ifc_timer_expire+0x1e8/0x494 net/ipv6/mcast.c:2474
  call_timer_fn+0xd0/0x570 kernel/time/timer.c:1431
  expire_timers kernel/time/timer.c:1476 [inline]
  __run_timers kernel/time/timer.c:1745 [inline]
  run_timer_softirq+0x2e4/0x384 kernel/time/timer.c:1758
  __do_softirq+0x204/0x7ac kernel/softirq.c:345
  do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline]
  invoke_softirq kernel/softirq.c:228 [inline]
  __irq_exit_rcu+0x1d8/0x200 kernel/softirq.c:422
  irq_exit+0x10/0x3c kernel/softirq.c:446
  __handle_domain_irq+0xb4/0x120 kernel/irq/irqdesc.c:692
  handle_domain_irq include/linux/irqdesc.h:176 [inline]
  gic_handle_irq+0x84/0xac drivers/irqchip/irq-gic.c:370
  __irq_svc+0x5c/0x94 arch/arm/kernel/entry-armv.S:205
  debug_smp_processor_id+0x0/0x24 lib/smp_processor_id.c:53
  rcu_read_lock_held_common kernel/rcu/update.c:108 [inline]
  rcu_read_lock_sched_held+0x24/0x7c kernel/rcu/update.c:123
  trace_lock_acquire+0x24c/0x278 include/trace/events/lock.h:13
  lock_acquire+0x3c/0x74 kernel/locking/lockdep.c:5481
  rcu_lock_acquire include/linux/rcupdate.h:267 [inline]
  rcu_read_lock include/linux/rcupdate.h:656 [inline]
  avc_has_perm_noaudit+0x6c/0x260 security/selinux/avc.c:1150
  selinux_inode_permission+0x140/0x220 security/selinux/hooks.c:3141
  security_inode_permission+0x44/0x60 security/security.c:1268
  inode_permission.part.0+0x5c/0x13c fs/namei.c:521
  inode_permission fs/namei.c:494 [inline]
  may_lookup fs/namei.c:1652 [inline]
  link_path_walk.part.0+0xd4/0x38c fs/namei.c:2208
  link_path_walk fs/namei.c:2189 [inline]
  path_lookupat+0x3c/0x1b8 fs/namei.c:2419
  filename_lookup+0xa8/0x1a4 fs/namei.c:2453
  user_path_at_empty+0x74/0x90 fs/namei.c:2733
  do_readlinkat+0x5c/0x12c fs/stat.c:417
  __do_sys_readlink fs/stat.c:450 [inline]
  sys_readlink+0x24/0x28 fs/stat.c:447
  ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64
  0x7eaa4974
irq event stamp: 298277
hardirqs last  enabled at (298277): [<802000d0>] no_work_pending+0x4/0x34
hardirqs last disabled at (298276): [<8020c9b8>] do_work_pending+0x9c/0x648 arch/arm/kernel/signal.c:676
softirqs last  enabled at (298216): [<8020167c>] __do_softirq+0x584/0x7ac kernel/softirq.c:372
softirqs last disabled at (298201): [<8024dff4>] do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline]
softirqs last disabled at (298201): [<8024dff4>] invoke_softirq kernel/softirq.c:228 [inline]
softirqs last disabled at (298201): [<8024dff4>] __irq_exit_rcu+0x1d8/0x200 kernel/softirq.c:422

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&pstats->syncp)->seq);
  <Interrupt>
    lock(&(&pstats->syncp)->seq);

 *** DEADLOCK ***

1 lock held by udevd/4013:
 #0: 82b09c5c (rcu_read_lock){....}-{1:2}, at: sk_filter_trim_cap+0x54/0x434 net/core/filter.c:139

stack backtrace:
CPU: 1 PID: 4013 Comm: udevd Not tainted 5.12.0-rc3-syzkaller #0
Hardware name: ARM-Versatile Express
Backtrace:
[<81802550>] (dump_backtrace) from [<818027c4>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
 r7:00000080 r6:600d0093 r5:00000000 r4:82b58344
[<818027ac>] (show_stack) from [<81809e98>] (__dump_stack lib/dump_stack.c:79 [inline])
[<818027ac>] (show_stack) from [<81809e98>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120)
[<81809de0>] (dump_stack) from [<81804a00>] (print_usage_bug.part.0+0x228/0x230 kernel/locking/lockdep.c:3806)
 r7:86bcb768 r6:81a0326c r5:830f96a8 r4:86bcb0c0
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (print_usage_bug kernel/locking/lockdep.c:3776 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (valid_state kernel/locking/lockdep.c:3818 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (mark_lock_irq kernel/locking/lockdep.c:4021 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (mark_lock.part.0+0xc34/0x136c kernel/locking/lockdep.c:4478)
 r10:83278fe8 r9:82c6d748 r8:00000000 r7:82c6d2d4 r6:00000004 r5:86bcb768
 r4:00000006
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (mark_lock kernel/locking/lockdep.c:4442 [inline])
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (mark_usage kernel/locking/lockdep.c:4391 [inline])
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (__lock_acquire+0x9bc/0x3318 kernel/locking/lockdep.c:4854)
 r10:86bcb768 r9:86bcb0c0 r8:00000001 r7:00040000 r6:0000075a r5:830f96a8
 r4:00000000
[<802bbc88>] (__lock_acquire) from [<802bfb90>] (lock_acquire.part.0+0xf0/0x41c kernel/locking/lockdep.c:5510)
 r10:00000000 r9:600d0013 r8:00000000 r7:00000000 r6:828a2680 r5:828a2680
 r4:861e5bc8
[<802bfaa0>] (lock_acquire.part.0) from [<802bff28>] (lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5483)
 r10:8146137c r9:00000000 r8:00000001 r7:00000000 r6:00000000 r5:00000000
 r4:ff7c9dec
[<802bfebc>] (lock_acquire) from [<81381eb4>] (do_write_seqcount_begin_nested include/linux/seqlock.h:520 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (do_write_seqcount_begin include/linux/seqlock.h:545 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (u64_stats_update_begin include/linux/u64_stats_sync.h:129 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (__bpf_prog_run_save_cb include/linux/filter.h:727 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (bpf_prog_run_save_cb include/linux/filter.h:741 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (sk_filter_trim_cap+0x26c/0x434 net/core/filter.c:149)
 r10:a4095dd0 r9:ff7c9dd0 r8:e44be000 r7:8146137c r6:00000001 r5:8611ba80
 r4:00000000
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (sk_filter include/linux/filter.h:867 [inline])
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (do_one_broadcast net/netlink/af_netlink.c:1468 [inline])
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (netlink_broadcast_filtered+0x27c/0x4fc net/netlink/af_netlink.c:1520)
 r10:00000001 r9:833d6b1c r8:00000000 r7:8572f864 r6:8611ba80 r5:8698d800
 r4:8572f800
[<81461100>] (netlink_broadcast_filtered) from [<81463e60>] (netlink_broadcast net/netlink/af_netlink.c:1544 [inline])
[<81461100>] (netlink_broadcast_filtered) from [<81463e60>] (netlink_sendmsg+0x3d0/0x478 net/netlink/af_netlink.c:1925)
 r10:00000000 r9:00000002 r8:8698d800 r7:000000b7 r6:8611b900 r5:861e5f50
 r4:86aa3000
[<81463a90>] (netlink_sendmsg) from [<81321f54>] (sock_sendmsg_nosec net/socket.c:654 [inline])
[<81463a90>] (netlink_sendmsg) from [<81321f54>] (sock_sendmsg+0x3c/0x4c net/socket.c:674)
 r10:00000000 r9:861e5dd4 r8:00000000 r7:86570000 r6:00000000 r5:86570000
 r4:861e5f50
[<81321f18>] (sock_sendmsg) from [<813234d0>] (____sys_sendmsg+0x230/0x29c net/socket.c:2350)
 r5:00000040 r4:861e5f50
[<813232a0>] (____sys_sendmsg) from [<8132549c>] (___sys_sendmsg+0xac/0xe4 net/socket.c:2404)
 r10:00000128 r9:861e4000 r8:00000000 r7:00000000 r6:86570000 r5:861e5f50
 r4:00000000
[<813253f0>] (___sys_sendmsg) from [<81325684>] (__sys_sendmsg net/socket.c:2433 [inline])
[<813253f0>] (___sys_sendmsg) from [<81325684>] (__do_sys_sendmsg net/socket.c:2442 [inline])
[<813253f0>] (___sys_sendmsg) from [<81325684>] (sys_sendmsg+0x58/0xa0 net/socket.c:2440)
 r8:80200224 r7:00000128 r6:00000000 r5:7eaa541c r4:86570000
[<8132562c>] (sys_sendmsg) from [<80200060>] (ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64)
Exception stack(0x861e5fa8 to 0x861e5ff0)
5fa0:                   00000000 00000000 0000000c 7eaa541c 00000000 00000000
5fc0: 00000000 00000000 76fbf840 00000128 00000000 0000008f 7eaa541c 000563f8
5fe0: 00056110 7eaa53e0 00036cec 76c9bf44
 r6:76fbf840 r5:00000000 r4:00000000

Fixes: 492ecee892 ("bpf: enable program stats")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-2-eric.dumazet@gmail.com
2021-10-27 11:13:52 -07:00