mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
1,267,977 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
0b20155f60 |
staging: rtl8192e: Replace rtl92e_disable_irq with rtl92e_irq_disable
Replace rtl92e_disable_irq with rtl92e_irq_disable to increase readability. priv->irq_enabled = 0 was set in both functions. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/07c7312d1571e23ee382d47095931d68ba194551.1694546300.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
f59edab87e |
staging: rtl8192e: Use standard function in softmac_mgmt_xmit()
Use standard function ieee80211_is_beacon() to avoid proprietary code to identify beacon and to increase readability in softmac_mgmt_xmit() and _rtl92e_translate_rx_signal_stats() Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/bd648e8e3c9c93c7944b72778ef7288973d8386e.1694546300.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
a00e00a20e |
staging: rtl8192e: Use standard function in rtllib_rx_check_duplicate()
Use standard function ieee80211_is_beacon() to avoid proprietary code and to increase readability. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/b74b6ef5e266504b9e3d84495bcd8fe4978b4ded.1694546300.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
dabd8585db |
staging: rtl8192e: Use standard function in rtllib_process_probe_response()
Replace proprietary is_beacon() with ieee80211_is_beacon() and proprietary "WLAN_FC_GET_STYPE(frame_ctl) == RTLLIB_STYPE_PROBE_RESP" with standard function to increase readability. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/ad24a52c045d6638103f4263b811c87d18cb3e97.1694546300.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
95862d083b |
staging: rtl8192e: Use standard ieee80211 function in rtllib_rx_mgt()
Replace WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl)) and comparison with standard function to avoid proprietary code and to increase readability. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/26cb0a7758186090a618a134c21e237594bbc525.1694546300.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
19444ae97e |
staging: rtl8192e: Remove useless equation in debug output
When "switch (WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl)))" results in "case RTLLIB_STYPE_BEACON:" there is no need to calculate this again inside "case" and when a frame is a beacon there is no need to print the frame identifier again as it is explicit. Same for PROBE RESPONSE and PROBE REQUEST. Remove dead code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/f3c8deddac66d11c41ba720e4048aba37e41e885.1694546300.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
b50d2a8c86 |
staging: rtl8192e: Remove unsupported mode IW_MODE_ADHOC
Remove unsupported mode IW_MODE_ADHOC because this mode is only partially coded in the driver. rtllib_rx_mgt() can only handle probe requests in IW_MODE_ADHOC and no authentication or association frames. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/20230827132704.GA12506@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
a132b784db |
perf test: Fix test-record-dummy-C0 failure for supported PERF_FORMAT_LOST feature kernel
For kernel that supports PERF_FORMAT_LOST, attr->read_format has
PERF_FORMAT_LOST bit. Update expected value of
attr->read_format of test-record-dummy-C0 for this scenario.
Before:
# ./perf test 17 -vv
17: Setup struct perf_event_attr :
--- start ---
test child forked, pid 1609441
<SNIP>
running './tests/attr/test-record-dummy-C0'
'PERF_TEST_ATTR=/tmp/tmpm3s60aji ./perf record -o /tmp/tmpm3s60aji/perf.data --no-bpf-event -e dummy -C 0 kill >/dev/null 2>&1' ret '1', expected '1'
expected read_format=4, got 20
FAILED './tests/attr/test-record-dummy-C0' - match failure
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
After:
# ./perf test 17 -vv
17: Setup struct perf_event_attr :
--- start ---
test child forked, pid 1609441
<SNIP>
running './tests/attr/test-record-dummy-C0'
'PERF_TEST_ATTR=/tmp/tmppa9vxcb7 ./perf record -o /tmp/tmppa9vxcb7/perf.data --no-bpf-event -e dummy -C 0 kill >/dev/null 2>&1' ret '1', expected '1'
<SNIP>
test child finished with 0
---- end ----
Setup struct perf_event_attr: Ok
Reported-and-Tested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230916091641.776031-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
|
12e94aee07 |
power: supply: core: Don't export power_supply_notifier
power_supply_notifier can be internal, since all users are going through power_supply_reg_notifier()/power_supply_unreg_notifier(). Link: https://lore.kernel.org/r/20230913133900.591637-1-sebastian.reichel@collabora.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
|
e39257cde7 |
power: supply: mm8013: Add more properties
While scanning the internet for MM8013 PDFs, I found one for a different IC from Mitsumi, MM8118 at [1]. It turned out however, that when you search through the PDF, the MM8118 text has an invsible text layer containing "MM8013" underneath.. With some elbow grease, I was able to confirm that most of the registers match between the two ICs. Based on that finding, introduce live battery voltage readout, hw-decided charge behavior readout and max current readout. Also, expand the existing POWER_SUPPLY_HEALTH reporting. [1] https://product.minebeamitsumi.com/en/product/category/ics/battery/fuel_gauge/parts/download/__icsFiles/afieldfile/2023/07/12/1_download_01_12.pdf Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230916-topic-mm8013_2-v1-1-02495e07fca0@linaro.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
|
f0b0d403ea |
Kbuild fixes for v6.6
- Fix kernel-devel RPM and linux-headers Deb package - Fix too long argument list error in 'make modules_install' -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmUF0Y4VHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGXVcP/2Jiv5RLizT5Aq7O1WuvG37NgSck cP8JJnX8NQxtBxJaPN7z5+t3c8fucKb1M0oko0mu+8SanoeXfz2NlijztVgCOeI5 DU8KPUQXmQLIwu2orpqrNqffBaiRpmrlo6HKsabmY8d67XwdWPxbwhUT8OOiDOQw 7iAkp9fntxyHctzWiAyUXelublydfqJndyi73GYDr2QMu9NEC7ej06asTsdmyvKY JmIO31Xl3RwktUFUOPiF4+ZhR3c2Lqh54vZQTCs9KuCxNJGHB2w5pFh2YVZ6LhTE RDvn6qel9aoKZKSfTUCGkA5+YMN5boFjWv4Ld1xOXlLFTPIEzmi4k5+NuctUak+H KF8Zam9lgb/AKO9t2z+E52rB55NPc6l6kVs/4DkoEVRZ9t8itl/RDN51LgSYDu9e Hl172up3/mtXNS5x3FRClvwdZgKHPVtXudg/+6yXO6opyq55ePFnZrom3BOWXhj/ BfUuI8g+Crb6Hfs4PB7II/ALaIVSqY3FvxfbKNSlDPUJ1s/OKg86Lc7ZG4r62mK4 SRlwKrM75MYZNmVu7QULyMEVIJ6vY2FGcjq4vKS4612gF10TBFpAc49hVFZnctgf LEr+u79lcviM6oFaw+6jAEe5L2MldzFrT+hR1EeLTxYLEX39w4IKm/nk1o5Q0Zp+ qxn5LPTtGrN5z35A =2LRy -----END PGP SIGNATURE----- Merge tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix kernel-devel RPM and linux-headers Deb package - Fix too long argument list error in 'make modules_install' * tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid long argument lists in make modules_install kbuild: fix kernel-devel RPM package and linux-headers Deb package |
||
|
|
3cec504909 |
vm: fix move_vma() memory accounting being off
Commit |
||
|
|
ad8a69f361 |
SCSI fixes on 20230916
16 small(ish) fixes all in drivers. The major fixes are in pm8001 (fixes MSI-X issue going back to its origin), the qla2xxx endianness fix, which fixes a bug on big endian and the lpfc ones which can cause an oops on module removal without them. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZQXNvyYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRKxAP4kCOBR UOGLJJdhmotofj9GX0Rr1qAFheJmTSAT6ctAOgD+IWucKDqKfbRLbmzqiSvmWmul P0STz4VnUKs9LqdLyok= =3wre -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "16 small(ish) fixes all in drivers. The major fixes are in pm8001 (fixes MSI-X issue going back to its origin), the qla2xxx endianness fix, which fixes a bug on big endian and the lpfc ones which can cause an oops on module removal without them" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file() scsi: target: core: Fix target_cmd_counter leak scsi: pm8001: Setup IRQs on resume scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock scsi: qedf: Add synchronization between I/O completions and abort scsi: target: Replace strlcpy() with strscpy() scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir() scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() scsi: qla2xxx: Correct endianness for rqstlen and rsplen scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP scsi: megaraid_sas: Fix deadlock on firmware crashdump |
||
|
|
cc3e5afc6a |
ata changes for 6.6-rc2
- Fix link power management transitions to disallow unsupported
states (Niklas).
- A small string handling fix for the sata_mv driver (Christophe).
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying). Followup fixes for this one are to not
clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to
continue on with other actions recorded with error interrupts
triggered before EH completes. A~Nd an additional fix to avoid
thawing a port twice in EH (Niklas).
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me).
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation
(Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZQWcYAAKCRDdoc3SxdoY
dg0HAQDxkfzueH5T00LSsg9+jI73eMScmC7asR3cbwmEiTRATgEAxpWUgaR7e7YP
ZM9XWTyfcCYTfAEaJduS5a6ThHl3pAI=
=gTtf
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix link power management transitions to disallow unsupported states
(Niklas)
- A small string handling fix for the sata_mv driver (Christophe)
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying).
Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
ata_eh_reset() to allow EH to continue on with other actions recorded
with error interrupts triggered before EH completes. And an
additional fix to avoid thawing a port twice in EH (Niklas)
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me)
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation (Niklas)
* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: fetch sense data for successful commands iff CDL enabled
ata: libata-eh: do not thaw the port twice in ata_eh_reset()
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata: pata_parport: Fix code style issues
ata: libahci: clear pending interrupt status
ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
ata: libata: disallow dev-initiated LPM transitions to unsupported states
|
||
|
|
cce67b6bed |
USB fix for 6.6-rc2
Here is a single USB fix for a much-reported regression for 6.6-rc1. It resolves a crash in the typec debugfs code for many systems. It's been in linux-next with no reported issues, and many people have reported it resolving their problem with 6.6-rc1. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWXNQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymxmwCcDS42Mt0fXkxsjzJy4KCNSCNEvcYAoJ/wfVw7 K2NylIy78y0PEvO4i0H9 =8qKC -----END PGP SIGNATURE----- Merge tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fix from Greg KH: "Here is a single USB fix for a much-reported regression for 6.6-rc1. It resolves a crash in the typec debugfs code for many systems. It's been in linux-next with no reported issues, and many people have reported it resolving their problem with 6.6-rc1" * tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix NULL pointer dereference |
||
|
|
205d049478 |
Driver core fix for 6.6-rc2
Here is a single driver core fix for a much-reported-by-sysbot issue that showed up in 6.6-rc1. It's been submitted by many people, all in the same way, so it obviously fixes things for them all. Also in here is a single documentation update adding riscv to the embargoed hardware document in case there are any future issues with that processor family. Both of these have been in linux-next with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWXxA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymPaQCgg34ErWYWTR2q/uCf4cpBce0q2xAAn226mZ6f Tt90d/o0lXnhtV8mXnWm =3Ye9 -----END PGP SIGNATURE----- Merge tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is a single driver core fix for a much-reported-by-sysbot issue that showed up in 6.6-rc1. It's been submitted by many people, all in the same way, so it obviously fixes things for them all. Also in here is a single documentation update adding riscv to the embargoed hardware document in case there are any future issues with that processor family. Both of these have been in linux-next with no reported problems" * tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V driver core: return an error when dev_set_name() hasn't happened |
||
|
|
fd455e77a6 |
Char/Misc fix for 6.6-rc2
Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the comedi subsystem that has ended up being incorrect and caused drivers that were working for people to be unable to be able to be selected to build at all. To fix this, the Kconfig change needs to be reverted and a future set of fixes for the ioport dependancies will show up in 6.7-rc1 (there's no rush for them.) This has been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWYWg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylW2ACdGSq8skVr8qCcaQ7z1nbrc/HWcXgAoKxrP53E 08QGj1NOD8cqWIcClQfg =dvIN -----END PGP SIGNATURE----- Merge tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the comedi subsystem that has ended up being incorrect and caused drivers that were working for people to be unable to be able to be selected to build at all. To fix this, the Kconfig change needs to be reverted and a future set of fixes for the ioport dependancies will show up in 6.7-rc1 (there's no rush for them.) This has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "comedi: add HAS_IOPORT dependencies" |
||
|
|
c37f8efcbc |
Main thing is the removal of 'probe_new' because all i2c client drivers
are converted now. Thanks Uwe, this marks the end of a long conversion process. Other than that, we have a few Kconfig updates and driver bugfixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmUFekwACgkQFA3kzBSg Kbbuag//WWvlEdixGIHwjiToGm4zvpVdV5txr2L1p1xWdXSrXtCVUifgvg6tTFj8 04hyuEP0c8ml90ZpBb6AMSggNGN09UdaMqb+dj52XBFbqsFOyCjXjy8bHOWZjJ5C /3N9/qUpDW4aJ3IBSQgLp+tcW+r6ulGa7KmZGazKkKSLiDIsqS4UicgEzLCA0Wig Zidy7Eaq6oo+nGtZH8UOava+o4P9nIrKRf/ILyXK8amFat0rTD1eT+fc7TvI5iC7 cZ5oFCAsaL1Jz7LNQxiCEQmQWBZOpyUbQlOfT2MCMNhWJG0x6FpF1cYqHHarNEJh UDxGQHG0Dj+AHtuZ4D4qAMxFlEYTVVNVNhSea02mxlqcOfbvvC73YfHAZIUsNdPt wStg+eSJjHAt/omqzOTTLEJAYnCWvjxc6+7/PN0HjLAipaR/KH1p67mCPKx5y/lt +OhvOS2eOpHWwiE9OZZCARqX5HlDJpGpK4TFy2rMOJvKnvYSzkHOd7Zy6Q9gRCW7 vVeJb1h1tI10RAufk8Rxfp3g8UiAFF8F1rxjDAgmMpGVTqM+TIM5Z2/b2vZdNU1R g1mta5OtDzVILs1uwkzS/opSsGvm0e4kDDREyb0spZusi6GZbni89+u93AXhCnkl UVmnz65CvQ7eiE9RGLXnsAIIgDdiO7JOAS2ALzK8/lPs8eXs3fU= =hFC5 -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "The main thing is the removal of 'probe_new' because all i2c client drivers are converted now. Thanks Uwe, this marks the end of a long conversion process. Other than that, we have a few Kconfig updates and driver bugfixes" * tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: cadence: Fix the kernel-doc warnings i2c: aspeed: Reset the i2c controller when timeout occurs i2c: I2C_MLXCPLD on ARM64 should depend on ACPI i2c: Make I2C_ATR invisible i2c: Drop legacy callback .probe_new() w1: ds2482: Switch back to use struct i2c_driver's .probe() |
||
|
|
ec6f1b4db9 |
Merge branch 'exceptions-1-2'
Kumar Kartikeya Dwivedi says:
====================
Exceptions - 1/2
This series implements the _first_ part of the runtime and verifier
support needed to enable BPF exceptions. Exceptions thrown from programs
are processed as an immediate exit from the program, which unwinds all
the active stack frames until the main stack frame, and returns to the
BPF program's caller. The ability to perform this unwinding safely
allows the program to test conditions that are always true at runtime
but which the verifier has no visibility into.
Thus, it also reduces verification effort by safely terminating
redundant paths that can be taken within a program.
The patches to perform runtime resource cleanup during the
frame-by-frame unwinding will be posted as a follow-up to this set.
It must be noted that exceptions are not an error handling mechanism for
unlikely runtime conditions, but a way to safely terminate the execution
of a program in presence of conditions that should never occur at
runtime. They are meant to serve higher-level primitives such as program
assertions.
The following kfuncs and macros are introduced:
Assertion macros are also introduced, please see patch 13 for their
documentation.
/* Description
* Throw a BPF exception from the program, immediately terminating its
* execution and unwinding the stack. The supplied 'cookie' parameter
* will be the return value of the program when an exception is thrown,
* and the default exception callback is used. Otherwise, if an exception
* callback is set using the '__exception_cb(callback)' declaration tag
* on the main program, the 'cookie' parameter will be the callback's only
* input argument.
*
* Thus, in case of default exception callback, 'cookie' is subjected to
* constraints on the program's return value (as with R0 on exit).
* Otherwise, the return value of the marked exception callback will be
* subjected to the same checks.
*
* Note that throwing an exception with lingering resources (locks,
* references, etc.) will lead to a verification error.
*
* Note that callbacks *cannot* call this helper.
* Returns
* Never.
* Throws
* An exception with the specified 'cookie' value.
*/
extern void bpf_throw(u64 cookie) __ksym;
/* This macro must be used to mark the exception callback corresponding to the
* main program. For example:
*
* int exception_cb(u64 cookie) {
* return cookie;
* }
*
* SEC("tc")
* __exception_cb(exception_cb)
* int main_prog(struct __sk_buff *ctx) {
* ...
* return TC_ACT_OK;
* }
*
* Here, exception callback for the main program will be 'exception_cb'. Note
* that this attribute can only be used once, and multiple exception callbacks
* specified for the main program will lead to verification error.
*/
\#define __exception_cb(name) __attribute__((btf_decl_tag("exception_callback:" #name)))
As such, a program can only install an exception handler once for the
lifetime of a BPF program, and this handler cannot be changed at
runtime. The purpose of the handler is to simply interpret the cookie
value supplied by the bpf_throw call, and execute user-defined logic
corresponding to it. The primary purpose of allowing a handler is to
control the return value of the program. The default handler returns the
cookie value passed to bpf_throw when an exception is thrown.
Fixing the handler for the lifetime of the program eliminates tricky and
expensive handling in case of runtime changes of the handler callback
when programs begin to nest, where it becomes more complex to save and
restore the active handler at runtime.
This version of offline unwinding based BPF exceptions is truly zero
overhead, with the exception of generation of a default callback which
contains a few instructions to return a default return value (0) when no
exception callback is supplied by the user.
Callbacks are disallowed from throwing BPF exceptions for now, since
such exceptions need to cross the callback helper boundary (and
therefore must care about unwinding kernel state), however it is
possible to lift this restriction in the future follow-up.
Exceptions terminate propogating at program boundaries, hence both
BPF_PROG_TYPE_EXT and tail call targets return to their caller context
the return value of the exception callback, in the event that they throw
an exception. Thus, exceptions do not cross extension or tail call
boundary.
However, this is mostly an implementation choice, and can be changed to
suit more user-friendly semantics.
Changelog:
----------
v2 -> v3
v2: https://lore.kernel.org/bpf/20230809114116.3216687-1-memxor@gmail.com
* Add Dave's Acked-by.
* Address all comments from Alexei.
* Use bpf_is_subprog to check for main prog in bpf_stack_walker.
* Drop accidental leftover hunk in libbpf patch.
* Split libbpf patch's refactoring to aid review
* Disable fentry/fexit in addition to freplace for exception cb.
* Add selftests for fentry/fexit/freplace on exception cb and main prog.
* Use btf_find_by_name_kind in bpf_find_exception_callback_insn_off (Martin)
* Split KASAN patch into two to aid backporting (Andrey)
* Move exception callback append step to bpf_object__reloacte (Andrii)
* Ensure that the exception callback name is unique (Andrii)
* Keep ASM implementation of assertion macros instead of C, as it does
not achieve intended results for bpf_assert_range and other cases.
v1 -> v2
v1: https://lore.kernel.org/bpf/20230713023232.1411523-1-memxor@gmail.com
* Address all comments from Alexei.
* Fix a few bugs and corner cases in the implementations found during
testing. Also add new selftests for these cases.
* Reinstate patch to consider ksym.end part of the program (but
reworked to cover other corner cases).
* Implement new style of tagging exception callbacks, add libbpf
support for the new declaration tag.
* Limit support to 64-bit integer types for assertion macros. The
compiler ends up performing shifts or bitwise and operations when
finally making use of the value, which defeats the purpose of the
macro. On noalu32 mode, the shifts may also happen before use,
hurting reliability.
* Comprehensively test assertion macros and their side effects on the
verifier state, register bounds, etc.
* Fix a KASAN false positive warning.
RFC v1 -> v1
RFC v1: https://lore.kernel.org/bpf/20230405004239.1375399-1-memxor@gmail.com
* Completely rework the unwinding infrastructure to use offline
unwinding support.
* Remove the runtime exception state and program rewriting code.
* Make bpf_set_exception_callback idempotent to avoid vexing
synchronization and state clobbering issues in presence of program
nesting.
* Disable bpf_throw within callback functions, for now.
* Allow bpf_throw in tail call programs and extension programs,
removing limitations of rewrite based unwinding.
* Expand selftests.
====================
Link: https://lore.kernel.org/r/20230912233214.1518551-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
|
d2a93715bf |
selftests/bpf: Add tests for BPF exceptions
Add selftests to cover success and failure cases of API usage, runtime behavior and invariants that need to be maintained for implementation correctness. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-18-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
d6ea068032 |
selftests/bpf: Add BPF assertion macros
Add macros implementing an 'assert' statement primitive using macros, built on top of the BPF exceptions support introduced in previous patches. The bpf_assert_*_with variants allow supplying a value which can the be inspected within the exception handler to signify the assert statement that led to the program being terminated abruptly, or be returned by the default exception handler. Note that only 64-bit scalar values are supported with these assertion macros, as during testing I found other cases quite unreliable in presence of compiler shifts/manipulations extracting the value of the right width from registers scrubbing the verifier's bounds information and knowledge about the value in the register. Thus, it is easier to reliably support this feature with only the full register width, and support both signed and unsigned variants. The bpf_assert_range is interesting in particular, which clamps the value in the [begin, end] (both inclusive) range within verifier state, and emits a check for the same at runtime. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-17-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
7e2925f672 |
libbpf: Add support for custom exception callbacks
Add support to libbpf to append exception callbacks when loading a program. The exception callback is found by discovering the declaration tag 'exception_callback:<value>' and finding the callback in the value of the tag. The process is done in two steps. First, for each main program, the bpf_object__sanitize_and_load_btf function finds and marks its corresponding exception callback as defined by the declaration tag on it. Second, bpf_object__reloc_code is modified to append the indicated exception callback at the end of the instruction iteration (since exception callback will never be appended in that loop, as it is not directly referenced). Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-16-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
6c918709bd |
libbpf: Refactor bpf_object__reloc_code
Refactor bpf_object__append_subprog_code out of bpf_object__reloc_code to be able to reuse it to append subprog related code for the exception callback to the main program. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-15-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
06d686f771 |
bpf: Fix kfunc callback register type handling
The kfunc code to handle KF_ARG_PTR_TO_CALLBACK does not check the reg
type before using reg->subprogno. This can accidently permit invalid
pointers from being passed into callback helpers (e.g. silently from
different paths). Likewise, reg->subprogno from the per-register type
union may not be meaningful either. We need to reject any other type
except PTR_TO_FUNC.
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Fixes:
|
||
|
|
fd548e1a46 |
bpf: Disallow fentry/fexit/freplace for exception callbacks
During testing, it was discovered that extensions to exception callbacks had no checks, upon running a testcase, the kernel ended up running off the end of a program having final call as bpf_throw, and hitting int3 instructions. The reason is that while the default exception callback would have reset the stack frame to return back to the main program's caller, the replacing extension program will simply return back to bpf_throw, which will instead return back to the program and the program will continue execution, now in an undefined state where anything could happen. The way to support extensions to an exception callback would be to mark the BPF_PROG_TYPE_EXT main subprog as an exception_cb, and prevent it from calling bpf_throw. This would make the JIT produce a prologue that restores saved registers and reset the stack frame. But let's not do that until there is a concrete use case for this, and simply disallow this for now. Similar issues will exist for fentry and fexit cases, where trampoline saves data on the stack when invoking exception callback, which however will then end up resetting the stack frame, and on return, the fexit program will never will invoked as the return address points to the main program's caller in the kernel. Instead of additional complexity and back and forth between the two stacks to enable such a use case, simply forbid it. One key point here to note is that currently X86_TAIL_CALL_OFFSET didn't require any modifications, even though we emit instructions before the corresponding endbr64 instruction. This is because we ensure that a main subprog never serves as an exception callback, and therefore the exception callback (which will be a global subprog) can never serve as the tail call target, eliminating any discrepancies. However, once we support a BPF_PROG_TYPE_EXT to also act as an exception callback, it will end up requiring change to the tail call offset to account for the extra instructions. For simplicitly, tail calls could be disabled for such targets. Noting the above, it appears better to wait for a concrete use case before choosing to permit extension programs to replace exception callbacks. As a precaution, we disable fentry and fexit for exception callbacks as well. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-13-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
66d9111f35 |
bpf: Detect IP == ksym.end as part of BPF program
Now that bpf_throw kfunc is the first such call instruction that has noreturn semantics within the verifier, this also kicks in dead code elimination in unprecedented ways. For one, any instruction following a bpf_throw call will never be marked as seen. Moreover, if a callchain ends up throwing, any instructions after the call instruction to the eventually throwing subprog in callers will also never be marked as seen. The tempting way to fix this would be to emit extra 'int3' instructions which bump the jited_len of a program, and ensure that during runtime when a program throws, we can discover its boundaries even if the call instruction to bpf_throw (or to subprogs that always throw) is emitted as the final instruction in the program. An example of such a program would be this: do_something(): ... r0 = 0 exit foo(): r1 = 0 call bpf_throw r0 = 0 exit bar(cond): if r1 != 0 goto pc+2 call do_something exit call foo r0 = 0 // Never seen by verifier exit // main(ctx): r1 = ... call bar r0 = 0 exit Here, if we do end up throwing, the stacktrace would be the following: bpf_throw foo bar main In bar, the final instruction emitted will be the call to foo, as such, the return address will be the subsequent instruction (which the JIT emits as int3 on x86). This will end up lying outside the jited_len of the program, thus, when unwinding, we will fail to discover the return address as belonging to any program and end up in a panic due to the unreliable stack unwinding of BPF programs that we never expect. To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as part of the BPF program, so that is_bpf_text_address returns true when such a case occurs, and we are able to unwind reliably when the final instruction ends up being a call instruction. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-12-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
ec5290a178 |
bpf: Prevent KASAN false positive with bpf_throw
The KASAN stack instrumentation when CONFIG_KASAN_STACK is true poisons the stack of a function when it is entered and unpoisons it when leaving. However, in the case of bpf_throw, we will never return as we switch our stack frame to the BPF exception callback. Later, this discrepancy will lead to confusing KASAN splats when kernel resumes execution on return from the BPF program. Fix this by unpoisoning everything below the stack pointer of the BPF program, which should cover the range that would not be unpoisoned. An example splat is below: BUG: KASAN: stack-out-of-bounds in stack_trace_consume_entry+0x14e/0x170 Write of size 8 at addr ffffc900013af958 by task test_progs/227 CPU: 0 PID: 227 Comm: test_progs Not tainted 6.5.0-rc2-g43f1c6c9052a-dirty #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-2.fc39 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x670 ? arch_stack_walk+0x79/0x100 kasan_report+0xda/0x110 ? stack_trace_consume_entry+0x14e/0x170 ? stack_trace_consume_entry+0x14e/0x170 ? __pfx_stack_trace_consume_entry+0x10/0x10 stack_trace_consume_entry+0x14e/0x170 ? __sys_bpf+0xf2e/0x41b0 arch_stack_walk+0x8b/0x100 ? __sys_bpf+0xf2e/0x41b0 ? bpf_prog_test_run_skb+0x341/0x1c70 ? bpf_prog_test_run_skb+0x341/0x1c70 stack_trace_save+0x9b/0xd0 ? __pfx_stack_trace_save+0x10/0x10 ? __kasan_slab_free+0x109/0x180 ? bpf_prog_test_run_skb+0x341/0x1c70 ? __sys_bpf+0xf2e/0x41b0 ? __x64_sys_bpf+0x78/0xc0 ? do_syscall_64+0x3c/0x90 ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 kasan_save_stack+0x33/0x60 ? kasan_save_stack+0x33/0x60 ? kasan_set_track+0x25/0x30 ? kasan_save_free_info+0x2b/0x50 ? __kasan_slab_free+0x109/0x180 ? kmem_cache_free+0x191/0x460 ? bpf_prog_test_run_skb+0x341/0x1c70 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x50 __kasan_slab_free+0x109/0x180 kmem_cache_free+0x191/0x460 bpf_prog_test_run_skb+0x341/0x1c70 ? __pfx_bpf_prog_test_run_skb+0x10/0x10 ? __fget_light+0x51/0x220 __sys_bpf+0xf2e/0x41b0 ? __might_fault+0xa2/0x170 ? __pfx___sys_bpf+0x10/0x10 ? lock_release+0x1de/0x620 ? __might_fault+0xcd/0x170 ? __pfx_lock_release+0x10/0x10 ? __pfx_blkcg_maybe_throttle_current+0x10/0x10 __x64_sys_bpf+0x78/0xc0 ? syscall_enter_from_user_mode+0x20/0x50 do_syscall_64+0x3c/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f0fbb38880d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f3 45 12 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe13907de8 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 00007ffe13908708 RCX: 00007f0fbb38880d RDX: 0000000000000050 RSI: 00007ffe13907e20 RDI: 000000000000000a RBP: 00007ffe13907e00 R08: 0000000000000000 R09: 00007ffe13907e20 R10: 0000000000000064 R11: 0000000000000206 R12: 0000000000000003 R13: 0000000000000000 R14: 00007f0fbb532000 R15: 0000000000cfbd90 </TASK> The buggy address belongs to stack of task test_progs/227 KASAN internal error: frame info validation failed; invalid marker: 0 The buggy address belongs to the virtual mapping at [ffffc900013a8000, ffffc900013b1000) created by: kernel_clone+0xcd/0x600 The buggy address belongs to the physical page: page:00000000b70f4332 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11418f flags: 0x2fffe0000000000(node=0|zone=2|lastcpupid=0x7fff) page_type: 0xffffffff() raw: 02fffe0000000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900013af800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffc900013af880: 00 00 00 f1 f1 f1 f1 00 00 00 f3 f3 f3 f3 f3 00 >ffffc900013af900: 00 00 00 00 00 00 00 00 00 00 00 f1 00 00 00 00 ^ ffffc900013af980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffc900013afa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Disabling lock debugging due to kernel taint Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-11-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
7ccb84f04c |
mm: kasan: Declare kasan_unpoison_task_stack_below in kasan.h
We require access to this kasan helper in BPF code in the next patch where we have to unpoison the task stack when we unwind and reset the stack frame from bpf_throw, and it never really unpoisons the poisoned stack slots on entry when compiler instrumentation is generated by CONFIG_KASAN_STACK and inline instrumentation is supported. Also, remove the declaration from mm/kasan/kasan.h as we put it in the header file kasan.h. Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Suggested-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-10-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
a923819fb2 |
bpf: Treat first argument as return value for bpf_throw
In case of the default exception callback, change the behavior of bpf_throw, where the passed cookie value is no longer ignored, but is instead the return value of the default exception callback. As such, we need to place restrictions on the value being passed into bpf_throw in such a case, only allowing those permitted by the check_return_code function. Thus, bpf_throw can now control the return value of the program from each call site without having the user install a custom exception callback just to override the return value when an exception is thrown. We also modify the hidden subprog instructions to now move BPF_REG_1 to BPF_REG_0, so as to set the return value before exit in the default callback. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-9-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
b62bf8a5e9 |
bpf: Perform CFG walk for exception callback
Since exception callbacks are not referenced using bpf_pseudo_func and bpf_pseudo_call instructions, check_cfg traversal will never explore instructions of the exception callback. Even after adding the subprog, the program will then fail with a 'unreachable insn' error. We thus need to begin walking from the start of the exception callback again in check_cfg after a complete CFG traversal finishes, so as to explore the CFG rooted at the exception callback. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-8-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
b9ae0c9dd0 |
bpf: Add support for custom exception callbacks
By default, the subprog generated by the verifier to handle a thrown exception hardcodes a return value of 0. To allow user-defined logic and modification of the return value when an exception is thrown, introduce the 'exception_callback:' declaration tag, which marks a callback as the default exception handler for the program. The format of the declaration tag is 'exception_callback:<value>', where <value> is the name of the exception callback. Each main program can be tagged using this BTF declaratiion tag to associate it with an exception callback. In case the tag is absent, the default callback is used. As such, the exception callback cannot be modified at runtime, only set during verification. Allowing modification of the callback for the current program execution at runtime leads to issues when the programs begin to nest, as any per-CPU state maintaing this information will have to be saved and restored. We don't want it to stay in bpf_prog_aux as this takes a global effect for all programs. An alternative solution is spilling the callback pointer at a known location on the program stack on entry, and then passing this location to bpf_throw as a parameter. However, since exceptions are geared more towards a use case where they are ideally never invoked, optimizing for this use case and adding to the complexity has diminishing returns. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-7-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
aaa619ebcc |
bpf: Refactor check_btf_func and split into two phases
This patch splits the check_btf_info's check_btf_func check into two separate phases. The first phase sets up the BTF and prepares func_info, but does not perform any validation of required invariants for subprogs just yet. This is left to the second phase, which happens where check_btf_info executes currently, and performs the line_info and CO-RE relocation. The reason to perform this split is to obtain the userspace supplied func_info information before we perform the add_subprog call, where we would now require finding and adding subprogs that may not have a bpf_pseudo_call or bpf_pseudo_func instruction in the program. We require this as we want to enable userspace to supply exception callbacks that can override the default hidden subprogram generated by the verifier (which performs a hardcoded action). In such a case, the exception callback may never be referenced in an instruction, but will still be suitably annotated (by way of BTF declaration tags). For finding this exception callback, we would require the program's BTF information, and the supplied func_info information which maps BTF type IDs to subprograms. Since the exception callback won't actually be referenced through instructions, later checks in check_cfg and do_check_subprogs will not verify the subprog. This means that add_subprog needs to add them in the add_subprog_and_kfunc phase before we move forward, which is why the BTF and func_info are required at that point. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-6-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
f18b03faba |
bpf: Implement BPF exceptions
This patch implements BPF exceptions, and introduces a bpf_throw kfunc to allow programs to throw exceptions during their execution at runtime. A bpf_throw invocation is treated as an immediate termination of the program, returning back to its caller within the kernel, unwinding all stack frames. This allows the program to simplify its implementation, by testing for runtime conditions which the verifier has no visibility into, and assert that they are true. In case they are not, the program can simply throw an exception from the other branch. BPF exceptions are explicitly *NOT* an unlikely slowpath error handling primitive, and this objective has guided design choices of the implementation of the them within the kernel (with the bulk of the cost for unwinding the stack offloaded to the bpf_throw kfunc). The implementation of this mechanism requires use of add_hidden_subprog mechanism introduced in the previous patch, which generates a couple of instructions to move R1 to R0 and exit. The JIT then rewrites the prologue of this subprog to take the stack pointer and frame pointer as inputs and reset the stack frame, popping all callee-saved registers saved by the main subprog. The bpf_throw function then walks the stack at runtime, and invokes this exception subprog with the stack and frame pointers as parameters. Reviewers must take note that currently the main program is made to save all callee-saved registers on x86_64 during entry into the program. This is because we must do an equivalent of a lightweight context switch when unwinding the stack, therefore we need the callee-saved registers of the caller of the BPF program to be able to return with a sane state. Note that we have to additionally handle r12, even though it is not used by the program, because when throwing the exception the program makes an entry into the kernel which could clobber r12 after saving it on the stack. To be able to preserve the value we received on program entry, we push r12 and restore it from the generated subprogram when unwinding the stack. For now, bpf_throw invocation fails when lingering resources or locks exist in that path of the program. In a future followup, bpf_throw will be extended to perform frame-by-frame unwinding to release lingering resources for each stack frame, removing this limitation. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-5-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
335d1c5b54 |
bpf: Implement support for adding hidden subprogs
Introduce support in the verifier for generating a subprogram and include it as part of a BPF program dynamically after the do_check phase is complete. The first user will be the next patch which generates default exception callbacks if none are set for the program. The phase of invocation will be do_misc_fixups. Note that this is an internal verifier function, and should be used with instruction blocks which uphold the invariants stated in check_subprogs. Since these subprogs are always appended to the end of the instruction sequence of the program, it becomes relatively inexpensive to do the related adjustments to the subprog_info of the program. Only the fake exit subprogram is shifted forward, making room for our new subprog. This is useful to insert a new subprogram, get it JITed, and obtain its function pointer. The next patch will use this functionality to insert a default exception callback which will be invoked after unwinding the stack. Note that these added subprograms are invisible to userspace, and never reported in BPF_OBJ_GET_INFO_BY_ID etc. For now, only a single subprogram is supported, but more can be easily supported in the future. To this end, two function counts are introduced now, the existing func_cnt, and real_func_cnt, the latter including hidden programs. This allows us to conver the JIT code to use the real_func_cnt for management of resources while syscall path continues working with existing func_cnt. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-4-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
fd5d27b701 |
arch/x86: Implement arch_bpf_stack_walk
The plumbing for offline unwinding when we throw an exception in programs would require walking the stack, hence introduce a new arch_bpf_stack_walk function. This is provided when the JIT supports exceptions, i.e. bpf_jit_supports_exceptions is true. The arch-specific code is really minimal, hence it should be straightforward to extend this support to other architectures as well, as it reuses the logic of arch_stack_walk, but allowing access to unwind_state data. Once the stack pointer and frame pointer are known for the main subprog during the unwinding, we know the stack layout and location of any callee-saved registers which must be restored before we return back to the kernel. This handling will be added in the subsequent patches. Note that while we primarily unwind through BPF frames, which are effectively CONFIG_UNWINDER_FRAME_POINTER, we still need one of this or CONFIG_UNWINDER_ORC to be able to unwind through the bpf_throw frame from which we begin walking the stack. We also require both sp and bp (stack and frame pointers) from the unwind_state structure, which are only available when one of these two options are enabled. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-3-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
9af27da631 |
bpf: Use bpf_is_subprog to check for subprogs
We would like to know whether a bpf_prog corresponds to the main prog or one of the subprogs. The current JIT implementations simply check this using the func_idx in bpf_prog->aux->func_idx. When the index is 0, it belongs to the main program, otherwise it corresponds to some subprogram. This will also be necessary to halt exception propagation while walking the stack when an exception is thrown, so we add a simple helper function to check this, named bpf_is_subprog, and convert existing JIT implementations to also make use of it. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230912233214.1518551-2-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
fff755e76e |
Merge branch 'TCP_INFO-RTO'
Aananth V says: ==================== tcp: new TCP_INFO stats for RTO events The 2023 SIGCOMM paper "Improving Network Availability with Protective ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can effectively reduce application disruption during outages. To better measure the efficacy of this feature, this patch set adds three more detailed stats during RTO recovery and exports via TCP_INFO. Applications and monitoring systems can leverage this data to measure the network path diversity and end-to-end repair latency during network outages to improve their network infrastructure. Patch 1 fixes a bug in TFO SYNACK that we encountered while testing these new metrics. Patch 2 adds the new metrics to tcp_sock and tcp_info. v2: Addressed feedback from a check bot in patch 2 by removing the inline keyword from the tcp_update_rto_time and tcp_update_rto_stats functions. Changed a comment in include/net/tcp.h to fit under 80 words. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
3868ab0f19 |
tcp: new TCP_INFO stats for RTO events
The 2023 SIGCOMM paper "Improving Network Availability with Protective
ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can
effectively reduce application disruption during outages. To better
measure the efficacy of this feature, this patch adds three more
detailed stats during RTO recovery and exports via TCP_INFO.
Applications and monitoring systems can leverage this data to measure
the network path diversity and end-to-end repair latency during network
outages to improve their network infrastructure.
The following counters are added to tcp_sock in order to track RTO
events over the lifetime of a TCP socket.
1. u16 total_rto - Counts the total number of RTO timeouts.
2. u16 total_rto_recoveries - Counts the total number of RTO recoveries.
3. u32 total_rto_time - Counts the total time spent (ms) in RTO
recoveries. (time spent in CA_Loss and
CA_Recovery states)
To compute total_rto_time, we add a new u32 rto_stamp field to
tcp_sock. rto_stamp records the start timestamp (ms) of the last RTO
recovery (CA_Loss).
Corresponding fields are also added to the tcp_info struct.
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
|
e326578a21 |
tcp: call tcp_try_undo_recovery when an RTOd TFO SYNACK is ACKed
For passive TCP Fast Open sockets that had SYN/ACK timeout and did not
send more data in SYN_RECV, upon receiving the final ACK in 3WHS, the
congestion state may awkwardly stay in CA_Loss mode unless the CA state
was undone due to TCP timestamp checks. However, if
tcp_rcv_synrecv_state_fastopen() decides not to undo, then we should
enter CA_Open, because at that point we have received an ACK covering
the retransmitted SYNACKs. Currently, the icsk_ca_state is only set to
CA_Open after we receive an ACK for a data-packet. This is because
tcp_ack does not call tcp_fastretrans_alert (and tcp_process_loss) if
!prior_packets
Note that tcp_process_loss() calls tcp_try_undo_recovery(), so having
tcp_rcv_synrecv_state_fastopen() decide that if we're in CA_Loss we
should call tcp_try_undo_recovery() is consistent with that, and
low risk.
Fixes:
|
||
|
|
50675d84e3 |
Merge branch 'dsa-microchip-drive-strength-support'
Oleksij Rempel says: ==================== net: dsa: microchip: add drive strength support changes v5: - rename milliamp to microamp - do not expect negative error code on snprintf - set coma after last struct element - rename found to have_any_prop changes v4: - integrate microchip feedback to the ksz9477_drive_strengths comment. - add Reviewed-by: Rob Herring <robh@kernel.org> changes v3: - yaml: use enum instead of min/max - do not use snprintf() on overlapping buffer. - unify ksz_drive_strength_to_reg() and ksz_drive_strength_error(). Make it usable for KSZ9477 and KSZ8830 variants. - use ksz_rmw8() in ksz9477_drive_strength_write() ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
d67d7247f6 |
net: dsa: microchip: Add drive strength configuration
Add device tree based drive strength configuration support. It is needed to pass EMI validation on our hardware. Configuration values are based on the vendor's reference driver. Tested on KSZ9563R. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
e26f40a60f |
dt-bindings: net: dsa: microchip: Update ksz device tree bindings for drive strength
Extend device tree bindings to support drive strength configuration for the ksz* switches. Introduced properties: - microchip,hi-drive-strength-microamp: Controls the drive strength for high-speed interfaces like GMII/RGMII and more. - microchip,lo-drive-strength-microamp: Governs the drive strength for low-speed interfaces such as LEDs, PME_N, and others. - microchip,io-drive-strength-microamp: Controls the drive strength for for undocumented Pads on KSZ88xx variants. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
cb47b1f679 |
igc: Fix infinite initialization loop with early XDP redirect
When an XDP redirect happens before the link is ready, that
transmission will not finish and will timeout, causing an adapter
reset. If the redirects do not stop, the adapter will not stop
resetting.
Wait for the driver to signal that there's a carrier before allowing
transmissions to proceed.
Previous code was relying that when __IGC_DOWN is cleared, the NIC is
ready to transmit as all the queues are ready, what happens is that
the carrier presence will only be signaled later, after the watchdog
workqueue has a chance to run. And during this interval (between
clearing __IGC_DOWN and the watchdog running) if any transmission
happens the timeout is emitted (detected by igc_tx_timeout()) which
causes the reset, with the potential for the infinite loop.
Fixes:
|
||
|
|
aabb4af9bb |
net: core: Use the bitmap API to allocate bitmaps
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them. It is less verbose and it improves the type checking and semantic. While at it, add missing header inclusion (should be bitops.h, but with the above change it becomes bitmap.h). Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230911154534.4174265-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
5e35a9ac3f |
ata: libata-core: fetch sense data for successful commands iff CDL enabled
Currently, we fetch sense data for a _successful_ command if either: 1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command sense data supported bit is set); or 2) Command was non-NCQ and regular sense data reporting is enabled. This means that case 2) will trigger for a non-NCQ command which has ATA_SENSE bit set, regardless if CDL is enabled or not. This decision was by design. If the device reports that it has sense data available, it makes sense to fetch that sense data, since the sk/asc/ascq could be important information regardless if CDL is enabled or not. However, the fetching of sense data for a successful command is done via ATA EH. Considering how intricate the ATA EH is, we really do not want to invoke ATA EH unless absolutely needed. Before commit |
||
|
|
7a3bc2b398 |
ata: libata-eh: do not thaw the port twice in ata_eh_reset()
commit |
||
|
|
80cc944eca |
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING, before calling ap->ops->error_handler() (without holding the ap->lock). If an error IRQ is received while ap->ops->error_handler() is running, the irq handler will set ATA_PFLAG_EH_PENDING. Once ap->ops->error_handler() returns, ata_scsi_port_error_handler() checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration of ATA EH is performed. The problem is that ATA_PFLAG_EH_PENDING is not only cleared by ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset(). ata_eh_reset() is called by ap->ops->error_handler(). This additional clearing done by ata_eh_reset() breaks the whole retry logic in ata_scsi_port_error_handler(). Thus, if an error IRQ is received while ap->ops->error_handler() is running, the port will currently remain frozen and will never get re-enabled. The additional clearing in ata_eh_reset() was introduced in commit |
||
|
|
b6a7eeb44a |
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says: ==================== Introduce Intel IDPF driver Pavan Kumar Linga says: This patch series introduces the Intel Infrastructure Data Path Function (IDPF) driver. It is used for both physical and virtual functions. Except for some of the device operations the rest of the functionality is the same for both PF and VF. IDPF uses virtchnl version2 opcodes and structures defined in the virtchnl2 header file which helps the driver to learn the capabilities and register offsets from the device Control Plane (CP) instead of assuming the default values. The format of the series follows the driver init flow to interface open. To start with, probe gets called and kicks off the driver initialization by spawning the 'vc_event_task' work queue which in turn calls the 'hard reset' function. As part of that, the mailbox is initialized which is used to send/receive the virtchnl messages to/from the CP. Once that is done, 'core init' kicks in which requests all the required global resources from the CP and spawns the 'init_task' work queue to create the vports. Based on the capability information received, the driver creates the said number of vports (one or many) where each vport is associated to a netdev. Also, each vport has its own resources such as queues, vectors etc. From there, rest of the netdev_ops and data path are added. IDPF implements both single queue which is traditional queueing model as well as split queue model. In split queue model, it uses separate queue for both completion descriptors and buffers which helps to implement out-of-order completions. It also helps to implement asymmetric queues, for example multiple RX completion queues can be processed by a single RX buffer queue and multiple TX buffer queues can be processed by a single TX completion queue. In single queue model, same queue is used for both descriptor completions as well as buffer completions. It also supports features such as generic checksum offload, generic receive offload (hardware GRO) etc. --- v7: Patch 2: * removed pci_[disable|enable]_pcie_error_reporting as they are dropped from the core Patch 4, 9: * used 'kasprintf' instead of 'snprintf' to avoid providing explicit character string size which also fixes "-Wformat-truncation" warnings Patch 14: * used 'ethtool_sprintf' instead of 'snprintf' to avoid providing explicit character string size which also fixes "-Wformat-truncation" warning * add string format argument to the 'ethtool_sprintf' to avoid warning on "-Wformat-security" v6: https://lore.kernel.org/netdev/20230825235954.894050-1-pavan.kumar.linga@intel.com/ Note: 'Acked-by' was only added to patches 1, 2, 12 and not to the other patches because of the changes in v6 Patch 3, 4, 5, 6, 7, 8, 9, 11, 13, 14, 15: * renamed 'reset_lock' to 'vport_ctrl_lock' to reflect the lock usage * to avoid defensive programming, used 'vport_ctrl_lock' for the user callbacks that access the 'vport' to prevent the hardware reset thread from releasing the 'vport', when the user callback is in progress * added some variables to netdev private structure to avoid vport access if possible from ethtool and ndo callbacks * moved 'mac_filter_list_lock' and MAC related flags to vport_config structure and refactored mac filter flow to handle asynchronous ndo mac filter callbacks * stop the queues before starting the reset flow to avoid TX hangs * removed 'sw_mutex' and 'stop_mutex' as they are not needed anymore * added missing clear bit in 'init_task' error path * renamed labels appropriately Patch 8: * replaced page_pool_put_page with page_pool_put_full_page * for the page pool max_len, used PAGE_SIZE Patch 10, 11, 13: * made use of the 'netif_txq_maybe_stop', '__netif_txq_completed_wake' helper macros Patch 13: * removed IDPF_HR_RESET_IN_PROG flag check in idpf_tx_singleq_start as it is defensive Patch 14: * removed max descriptor check as the core does that * removed unnecessary error messages * removed the stats that are common between the ones reported by ethtool and ip link * replaced snprintf with ethtool_sprintf * added a comment to explain the reason for the max queue check * as the netdev queues are set on alloc, there is no need to set them again on reset unless there is a queue change, so move the 'idpf_set_real_num_queues' to 'idpf_initiate_soft_reset' Patch 15: * reworded the 'configure SRIOV' in the commit message v5: https://lore.kernel.org/netdev/20230816004305.216136-1-anthony.l.nguyen@intel.com/ Most Patches: * wrapped line limit to 80 chars to those which don't effect readability Patch 12: * in skb_add_rx_frag, offset 'headlen' w.r.t page_offset when adding a frag to avoid adding the header again Patch 14: * added NULL check for 'rxq' when dereferencing it in page_pool_get_stats v4: https://lore.kernel.org/netdev/20230808003416.3805142-1-anthony.l.nguyen@intel.com/ Patch 1: * s/virtcnl/virtchnl * removed the kernel doc for the error code definitions that don't exist * reworded the summary part in the virtchnl2 header Patch 3: * don't set local variable to NULL on error * renamed sq_send_command_out label with err_unlock * don't use __GFP_ZERO in dma_alloc_coherent Patch 4: * introduced mailbox workqueue to process mailbox interrupts Patch 3, 4, 5, 6, 7, 8, 9, 11, 15: * removed unnecessary variable 0-init Patch 3, 5, 7, 8, 9, 15: * removed defensive programming checks wherever applicable * removed IDPF_CAP_FIELD_LAST as it can be treated as defensive programming Patch 3, 4, 5, 6, 7: * replaced IDPF_DFLT_MBX_BUF_SIZE with IDPF_CTLQ_MAX_BUF_LEN Patch 2 to 15: * add kernel-doc for idpf.h and idpf_txrx.h enums and structures Patch 4, 5, 15: * adjusted the destroy sequence of the workqueues as per the alloc sequence Patch 4, 5, 9, 15: * scrub unnecessary flags in 'idpf_flags' - IDPF_REMOVE_IN_PROG flag can take care of the cases where IDPF_REL_RES_IN_PROG is used, removed the later one - IDPF_REQ_[TX|RX]_SPLITQ are replaced with struct variables - IDPF_CANCEL_[SERVICE|STATS]_TASK are redundant as the work queue doesn't get rescheduled again after 'cancel_delayed_work_sync' - IDPF_HR_CORE_RESET is removed as there is no set_bit for this flag - IDPF_MB_INTR_TRIGGER is removed as it is not needed anymore with the mailbox workqueue implementation Patch 7 to 15: * replaced the custom buffer recycling code with page pool API * switched the header split buffer allocations from using a bunch of pages to using one large chunk of DMA memory * reordered some of the flows in vport_open to support page pool Patch 8, 12: * don't suppress the alloc errors by using __GFP_NOWARN Patch 9: * removed dyn_ctl_clrpba_m as it is not being used Patch 14: * introduced enum idpf_vport_reset_cause instead of using vport flags * introduced page pool stats v3: https://lore.kernel.org/netdev/20230616231341.2885622-1-anthony.l.nguyen@intel.com/ Patch 5: * instead of void, used 'struct virtchnl2_create_vport' type for vport_params_recvd and vport_params_reqd and removed the typecasting * used u16/u32 as needed instead of int for variables which cannot be negative and updated in all the places whereever applicable Patch 6: * changed the commit message to "add ptypes and MAC filter support" * used the sender Signed-off-by as the last tag on all the patches * removed unnecessary variables 0-init * instead of fixing the code in this commit, fixed it in the commit where the change was introduced first * moved get_type_info struct on to the stack instead of memory alloc * moved mutex_lock and ptype_info memory alloc outside while loop and adjusted the return flow * used 'break' instead of 'continue' in ptype id switch case v2: https://lore.kernel.org/netdev/20230614171428.1504179-1-anthony.l.nguyen@intel.com/ Patch 2: * added "Intel(R)" to the DRV_SUMMARY and Makefile. Patch 4, 5, 6, 15: * replaced IDPF_VC_MSG_PENDING flag with mutex 'vc_buf_lock' for the adapter related virtchnl opcodes. * get the mutex lock in the virtchnl send thread itself instead of in receive thread. Patch 5, 6, 7, 8, 9, 11, 14, 15: * replaced IDPF_VPORT_VC_MSG_PENDING flag with mutex 'vc_buf_lock' for the vport related virtchnl opcodes. * get the mutex lock in the virtchnl send thread itself instead of in receive thread. Patch 6: * converted get_ptype_info logic from 1:N to 1:1 message exchange for better handling of mutex lock. Patch 15: * introduced 'stats_lock' spinlock to avoid concurrent stats update. v1: https://lore.kernel.org/netdev/20230530234501.2680230-1-anthony.l.nguyen@intel.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
2fa6175d8b |
Merge branch 'loongson1-mac'
Keguang Zhang says:
====================
Move Loongson1 MAC arch-code to the driver dir
In order to convert Loongson1 MAC platform devices to the devicetree
nodes, Loongson1 MAC arch-code should be moved to the driver dir.
Add dt-binding document and update MAINTAINERS file accordingly.
In other words, this patchset is a preparation for converting
Loongson1 platform devices to devicetree.
Changelog
V4 -> V5: Replace stmmac_probe_config_dt() with devm_stmmac_probe_config_dt()
Replace stmmac_pltfr_probe() with devm_stmmac_pltfr_probe()
Squash patch 4 into patch 2 and 3
V3 -> V4: Add Acked-by tag from Krzysztof Kozlowski
Add "|" to description part
Amend "phy-mode" property
Drop ls1x_dwmac_syscon definition and its instances
Drop three redundant fields from the ls1x_dwmac structure
Drop the ls1x_dwmac_init() method.
Update the dt-binding document entry of Loongson1 Ethernet
Some minor improvements
V2 -> V3: Split the DT-schema file into loongson,ls1b-gmac.yaml
and loongson,ls1c-emac.yaml (suggested by Serge Semin)
Change the compatibles to loongson,ls1b-gmac and loongson,ls1c-emac
Rename loongson,dwmac-syscon to loongson,ls1-syscon
Amend the title
Add description
Add Reviewed-by tag from Krzysztof Kozlowski
Change compatibles back to loongson,ls1b-syscon
and loongson,ls1c-syscon
Determine the device ID by physical
base address(suggested by Serge Semin)
Use regmap instead of regmap fields
Use syscon_regmap_lookup_by_phandle()
Some minor fixes
Update the entries of MAINTAINERS
V1 -> V2: Leave the Ethernet platform data for now
Make the syscon compatibles more specific
Fix "clock-names" and "interrupt-names" property
Rename the syscon property to "loongson,dwmac-syscon"
Drop "phy-handle" and "phy-mode" requirement
Revert adding loongson,ls1b-dwmac/loongson,ls1c-dwmac
to snps,dwmac.yaml
Fix the build errors due to CONFIG_OF being unset
Change struct reg_field definitions to const
Rename the syscon property to "loongson,dwmac-syscon"
Add MII PHY mode for LS1C
Improve the commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
|
d301c66b35 |
net: stmmac: Add glue layer for Loongson-1 SoC
This glue driver is created based on the arch-code implemented earlier with the platform-specific settings. Use syscon for SYSCON register access. And modify MAINTAINERS to add a new F: entry for this driver. Partially based on the previous work by Serge Semin. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |