Initial support for the SM4450 platform and the QRD device thereon is
added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.
-----BEGIN PGP SIGNATURE-----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=uK0C
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zUL1
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the QRD device thereon is
added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.
* tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits)
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen
arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration
arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins
arm64: dts: qcom: msm8998: Add DPU1 nodes
arm64: dts: qcom: msm8996: Fix dsi1 interrupts
arm64: dts: qcom: sdx75-idp: Add regulator nodes
arm64: dts: qcom: sdx75: Add rpmhpd node
arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
arm64: dts: qcom: Add pmx75 PMIC dtsi
arm64: dts: qcom: Add pm7550ba PMIC dtsi
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
arm64: dts: qcom: sdx75: Add spmi node
arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU
...
Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
GCC and LCC clock controller parent clocks are introduced on MDM9615.
The newly introduced RPM representation is introduced across multiple
platforms.
Voltage ADC channel names are corrected across multiple platforms.
APQ8064 gains a definition for GSBI4.
The XO clock for SDHCI is corrected, as is the USB node name, on
IPQ4019. USB node name is also corrected for SDX55.
The correct PMIC is included on SDX65 MTP.
The incorrect spi-max-frequency property is removed from controllers on
IPQ8064 and MSM8960.
OCMEM and the display subsystem are added to MSM8226.
Reset line is added to the PM8941 and the APQ8074 Dragonboard, while a
few properties of the Sony Xperia Z2 Tablet touchscreen are corrected.
-----BEGIN PGP SIGNATURE-----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=uBzp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=38r2
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.6
GCC and LCC clock controller parent clocks are introduced on MDM9615.
The newly introduced RPM representation is introduced across multiple
platforms.
Voltage ADC channel names are corrected across multiple platforms.
APQ8064 gains a definition for GSBI4.
The XO clock for SDHCI is corrected, as is the USB node name, on
IPQ4019. USB node name is also corrected for SDX55.
The correct PMIC is included on SDX65 MTP.
The incorrect spi-max-frequency property is removed from controllers on
IPQ8064 and MSM8960.
OCMEM and the display subsystem are added to MSM8226.
Reset line is added to the PM8941 and the APQ8074 Dragonboard, while a
few properties of the Sony Xperia Z2 Tablet touchscreen are corrected.
* tag 'qcom-dts-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: add support to gsbi4 uart
ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
ARM: dts: qcom: ipq4019: correct SDHCI XO clock
ARM: dts: qcom: Use labels with generic node names for ADC channels
ARM: dts: qcom-mdm9615: specify gcc clocks
ARM: dts: qcom-mdm9615: specify clocks for the lcc device
ARM: dts: qcom: msm8974pro-castor: correct touchscreen syna,nosleep-mode
ARM: dts: qcom: msm8974pro-castor: correct touchscreen function names
ARM: dts: qcom: msm8974pro-castor: correct inverted X of touchscreen
ARM: dts: qcom: apq8064: Drop redundant /smd node
ARM: dts: qcom: Add rpm-proc node for SMD platforms
ARM: dts: qcom: apq8074-dragonboard: add resin
ARM: dts: qcom-pm8941: add resin support
ARM: dts: qcom: minor whitespace cleanup around '='
ARM: dts: qcom: msm8960: drop spi-max-frequency from controller
ARM: dts: qcom: ipq8064: drop spi-max-frequency from controller
ARM: dts: qcom: sdx55: use generic node names for USB
ARM: dts: qcom: ipq4019: use generic node names for USB
ARM: dts: qcom: msm8226: Add ocmem
ARM: dts: qcom: msm8226: Add mdss nodes
Link: https://lore.kernel.org/r/20230818024928.2485173-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
and some improvements for the edgeble-neu2 board based on this soc.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQ7IQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcRZCACtZP2dByueGP0I1NA607XfCTXTDsdq1hjM
We/+nIMGLXjaG+SWuVvCcvXyE6MW7cg0UIquNCowhCzyKjhAhNXGjkCskAekAx3c
XIuW6VkZ7Qmfp1OWKqiI34xx5NOUNVZl3llAe8wZFjZZd+fVjv5Ao11p5IRDNzOt
iFCO4SSU9KqeZYFF04VQFZb35p0WSaCWdY4iDPGRqvD/lMtlrL+3lx09uZ0B+yUz
pVErjD0MWO/pmfN9JCwFlWg7TISfxl5nOqT+PKsp1WshUkema21+in18Uh0An1l9
eYE+bvdwliw6rqBu2587vo3OpU/VygArEPBroaBwboHdpBKCbzHS
=VMKL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkEGMACgkQYKtH/8kJ
UiejtQ/+LZzxmRuuRTqdO1hXpuK5rSkJsdS3j+YYuqVRDo1mp+2bBxERsVK4JU2g
zLbw4LtcfKL0RU3TdEm2p6G2MiU2IV2Aqo/bIyJLSMe92N1jM86Fj9N3NG9uRkHd
jLxxcvWsBeHTQA1goGSGeXK8iZ9wE08C+K1OC3FLyS5TzD+lnWnVadeGY3wOKTG3
CkX/Zu3q7n7Qk2jlduoG4ac7iJPM1Jj76LX2H/7Rkwg+ckIMWwK5nuvX74lDHqMK
SvjvM6V3a6j9PTb1ihckVA/3BHZ93Wd7jj4pWysm63uCpIMPFTqoy/3nHI/oeIMy
7ryfAS+Zdra9FUPuY51tbF7ulpFZ3OUh0b59/QYW1T6AXoWqsHkgPShv/6tYYqI7
aJxvIqoCffrTEYhjkt8ZyP6H5Nx+bq4xSf3MSGwgynoMJtaGgsd2It83q8cuQOM8
DV6Oq2DVOKl84D288I7evD9aB9V2cKFikGp1h387hIsMpSusMdDKNRAnnGhP3sTW
jRgVohL6Lh8Jb264C8Ss7B9Jq0nsENSutprqhAnh0XknfV3XKUwjo03gS/YukpWs
jCz8hhGp3XBxdOhJbfVwLxbK958J8el1Omu909fOInN23TeWNmLzBVhj+W+Hn3Vk
XXo9LNs+3IiQbBhDZT9qU2lvXrteFi+BKpZHPhRy3uP8UCyGqxo=
=1u7+
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Basic graphics support for rv1126, some more new peripherals for it as well
and some improvements for the edgeble-neu2 board based on this soc.
* tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add rv1126 VOP_LITE support
ARM: dts: rockchip: Add rv1126 PD_VO entry
ARM: dts: rockchip: Add 12V main supply for edgeble-neu2
ARM: dts: rockchip: Add 3V3_SYS regulator for edgeble-neu2
ARM: dts: rockchip: Enable SFC for edgeble-neu2
ARM: dts: rockchip: Drop EMMC_RSTN for edgeble-neu2
ARM: dts: rockchip: Add rv1126 uart5m2_xfer pins
ARM: dts: rockchip: Add rv1126 FSPI pins
ARM: dts: rockchip: Add SFC node to rv1126
Link: https://lore.kernel.org/r/6299163.hdfAi7Kttb@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many new peripherals for the still only basic supported rk3588 soc
(PCIe2, PCIe3, USB2, SATA, Combo-Phys).
Improvements to the Rock-5a development board based on this soc (saradc,
i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card,
some regulators, pmic).
Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata,
sata, sd-card, pmic)
RK3399 got the PCIe endpoint node when used as a PCIe-client.
And some minor changes for some boards: spi-flash for RockPi 4,
SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios
on engicam and gru boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdRnwQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcffB/4sR8h7IBNMN/0yUyn1ALlAZWt6K9mNQbIq
0mRMJHllMeefLL952Gsnpw3uj6mz/GKIa0H0g88giWMJOOknH/zIKyYE/9Li0WwO
KFoF2KA76JQlN+Dv7qHfhv38Q996/AI6Bc1dGcU1x611/jZlbZojXqnBKvT4RyFJ
rbRvD6nF8LeW6yQP1u+4wA2UnHonYJstU6bEbAf1KXofQIzcspDBzKHuQtza152F
3YVR5+yCIG4zFVSksvX5+DkJvvYYP/dkLftrh69dgYNHDcXonHYLNkR9E05kWL+/
xhH58h20b/tBonJoh2ZSNKdZSvv2w8BdCQP/SGn54YQ+8nclsnFI
=g1qK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkEAAACgkQYKtH/8kJ
UifOyw/+MnuyOqhjWQrDUsxsxULVsBUn71RsYXz9jPcrZSkeD4RgyqxIlBtJkMxf
xBclgRHMVr6AAnz8UNjpdSSlJFH9Kr6inoNwdpWZB9UqEfZIQb5RJnDkvgyR1CA5
BmE0Xt6usuPsDEsgvUXQVdbmQIKB7H3ZxW9Jx+gTbPcR0Ktm5EIZ0tI6B6Hq2i42
if+Bw9JrKCucsb8NAuyClslXRXHKxOZLEVuatlOpUf+tMaDF1vAmWhtc7QMQ8OWV
Io7OVCQIiFo8+b8gHg6qWx5zqrjVUY55VpP/R5+5tj+vYU/+bLbmUAMbGDNi8utM
WbGoXCZBBX9SBQFSQ5mp5sDwXFZR13nN4vqwkGEBdHWIeZDBvVf+og/V4KTxhpQB
muQLS4OizirbOZV0mU1t/Ds5ZlrllKA3jI5fDM6HIL/tspEIxHqLgJd3Z5Og9Rn5
mzIgP+gjqc7Pl1g5KGmyu8Y5btEj/WSKNY4CBOPDCTW1TCshgP26pecp8cV+bKhe
e1z7hqXL2romDinDeBVJFrNQhX2Ki/xoh6DwE7Tkf9o00aNftIBbHqeXYaJmK4Z+
jpA6ycOY4LHBfrT7Y1XWLVGPYHq/2yaYZmdWuSHmNIGVgXJEVtv0q35KPabFGQSq
XkleG8IPC3XCX5OZ9xVfVwUmVVhRW9f5X9VEM4leICY1xJ0tFoY=
=XITG
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE.
Many new peripherals for the still only basic supported rk3588 soc
(PCIe2, PCIe3, USB2, SATA, Combo-Phys).
Improvements to the Rock-5a development board based on this soc (saradc,
i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card,
some regulators, pmic).
Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata,
sata, sd-card, pmic)
RK3399 got the PCIe endpoint node when used as a PCIe-client.
And some minor changes for some boards: spi-flash for RockPi 4,
SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios
on engicam and gru boards.
* tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support
arm64: dts: rockchip: add rk3588 PCIe2 support
arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C
arm64: dts: rockchip: Add NanoPC T6
dt-bindings: arm: rockchip: Add NanoPC T6
arm64: dts: rockchip: Enable SATA on Radxa E25
arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
arm64: dts: rockchip: switch px30-engicam to enable-gpios
arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios
arm64: dts: rockchip: add PCIe3 support for rk3588
arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b
arm64: dts: rockchip: add USB2 to rk3588s-rock5a
arm64: dts: rockchip: add USB2 to rk3588-rock5b
arm64: dts: rockchip: add USB2 to rk3588-evb1
arm64: dts: rockchip: add USB2 support for rk3588
arm64: dts: rockchip: Enable RS485 for edgeble-neu6b
arm64: dts: rockchip: Enable RS232 for edgeble-neu6b
arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b
arm64: dts: rockchip: Enable RTC for edgeble-neu6b
arm64: dts: rockchip: Enable SATA for edgeble-neu6b
...
Link: https://lore.kernel.org/r/7414564.rnE6jSC6OK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
- MCU:
- Add CAN support on stm32f746.
- Add touchscreen support (edt-ft5306) on stm32f746-disco.
- Add support to Rocktech RK043FN48H display on stm32f746-disco
board.
- Add gpio-ranges for stm32f7 to fix boot issue.
- MPU:
- STM32MP13:
- Remove shmem for scmi-optee to match with OP-TEE configuration.
- Enable OP-TEE asynchronous notification by using PPI#15.
- Expose and use SCMI regulators on stm32mp135f-dk.
- STMP32MP15:
- Remove shmem for scmi-optee to match with OPTEE configuration
- Deduplicate DSI node to fix #address-cells/#size-cells issue on
boards using it.
- ST:
- Fix dts check warnings on stm32mp15-scmi boards.
- DH:
- Add missing detach mailbox for DHCOM and DHCOR SoM.
- Odyssey:
- Add missing detach mailbox for Odyssey SoM.
- OCTAVO:
- Add Linux Automation Test Automation Controller (LXA TAC) based
on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
DSA-capable ETH switch (2 ports), dual CAN...
It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
on STM32MP157.
- PROTONIC:
- Add Power over Data Line (PoDL) Power Source Equipment (PSE)
regulator nodes on PRTT1C board. It allows power delivery and
data transmission over a single twisted pair.
-----BEGIN PGP SIGNATURE-----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=oGBN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fz66
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.6, round 1
Highlights:
----------
- MCU:
- Add CAN support on stm32f746.
- Add touchscreen support (edt-ft5306) on stm32f746-disco.
- Add support to Rocktech RK043FN48H display on stm32f746-disco
board.
- Add gpio-ranges for stm32f7 to fix boot issue.
- MPU:
- STM32MP13:
- Remove shmem for scmi-optee to match with OP-TEE configuration.
- Enable OP-TEE asynchronous notification by using PPI#15.
- Expose and use SCMI regulators on stm32mp135f-dk.
- STMP32MP15:
- Remove shmem for scmi-optee to match with OPTEE configuration
- Deduplicate DSI node to fix #address-cells/#size-cells issue on
boards using it.
- ST:
- Fix dts check warnings on stm32mp15-scmi boards.
- DH:
- Add missing detach mailbox for DHCOM and DHCOR SoM.
- Odyssey:
- Add missing detach mailbox for Odyssey SoM.
- OCTAVO:
- Add Linux Automation Test Automation Controller (LXA TAC) based
on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
DSA-capable ETH switch (2 ports), dual CAN...
It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
on STM32MP157.
- PROTONIC:
- Add Power over Data Line (PoDL) Power Source Equipment (PSE)
regulator nodes on PRTT1C board. It allows power delivery and
data transmission over a single twisted pair.
* tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (29 commits)
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
ARM: dts: st: Add gpio-ranges for stm32f769-pinctrl
ARM: dts: st: Add gpio-ranges for stm32f746-pinctrl
ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
ARM: dts: st: stm32mp157c-emstamp: drop incorrect vref_ddr property
ARM: dts: stm32: fix dts check warnings on stm32mp15-scmi
ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM
ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon
ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes
ARM: dts: stm32: add touchscreen on stm32f746-disco board
ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
ARM: dts: stm32: re-add CAN support on stm32f746
...
Link: https://lore.kernel.org/r/c0524a16-ab27-0cb5-8e7b-c12f7bde7e0d@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This marks the MSM8996 global clock controller as buildin, to avoid boot
issues. The SC8280XP GPU clock controller is enabled, to enable GPU
support. A series of drivers needed to boot the IPQ5018 platform is
enabled, and the ethernet PHY to enable Ethernet on SA8775P is enabled.
-----BEGIN PGP SIGNATURE-----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=Fk9Y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2aFg
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.6
This marks the MSM8996 global clock controller as buildin, to avoid boot
issues. The SC8280XP GPU clock controller is enabled, to enable GPU
support. A series of drivers needed to boot the IPQ5018 platform is
enabled, and the ethernet PHY to enable Ethernet on SA8775P is enabled.
* tag 'qcom-arm64-defconfig-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable IPQ5018 SoC base configs
arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
arm64: defconfig: enable Qualcomm MSM8996 Global Clock Controller as built-in
arm64: defconfig: Enable Qualcomm SC8280XP GPUCC
Link: https://lore.kernel.org/r/20230818023651.2484774-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.
However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).
This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.
I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.
Fix this by explicitly terminating the lookup at the ACPI namespace root
object.
Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.
Example stack trace of such oops:
[ 3.710827] ? __die+0x1f/0x60
[ 3.715030] ? page_fault_oops+0x159/0x460
[ 3.716008] ? exc_page_fault+0x73/0x170
[ 3.716959] ? asm_exc_page_fault+0x22/0x30
[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0
[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0
[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0
[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200
[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0
[ 3.723559] ? down_timeout+0x3a/0x60
[ 3.724455] ? acpi_ns_get_node+0x3a/0x60
[ 3.725412] acpi_ns_get_node+0x3a/0x60
[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0
[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0
[ 3.728400] acpi_rs_get_method_data+0x2b/0x70
[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.732411] acpi_walk_resources+0x78/0xd0
[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus]
[ 3.734802] platform_probe+0x3d/0x90
[ 3.735684] really_probe+0x19b/0x400
[ 3.736570] ? __device_attach_driver+0x100/0x100
[ 3.737697] __driver_probe_device+0x78/0x160
[ 3.738746] driver_probe_device+0x1f/0x90
[ 3.739743] __driver_attach+0xc2/0x1b0
[ 3.740671] bus_for_each_dev+0x70/0xc0
[ 3.741601] bus_add_driver+0x10e/0x210
[ 3.742527] driver_register+0x55/0xf0
[ 3.744412] ? 0xffffffffc039a000
[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]
Fixes: 7f163a6fd9 ("drivers:hv: Modify hv_vmbus to search for all MMIO ranges available.")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/fd8e64ceeecfd1d95ff49021080cf699e88dbbde.1691606267.git.maciej.szmigiero@oracle.com
Driver changes for ti-sysc interconnect target module driver and for
l3 interconnect error handler. The ti-sysc driver changes just enable
using it for 64-bit systems like TI am62 that have wake-up capability
for the wkup domain devices. The l3 error handling improves the code
to show the error source if an unrecoverable timeout error occurs.
-----BEGIN PGP SIGNATURE-----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=//Xy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QAxs
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/drivers
Driver changes for omaps for v6.6
Driver changes for ti-sysc interconnect target module driver and for
l3 interconnect error handler. The ti-sysc driver changes just enable
using it for 64-bit systems like TI am62 that have wake-up capability
for the wkup domain devices. The l3 error handling improves the code
to show the error source if an unrecoverable timeout error occurs.
* tag 'omap-for-v6.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix cast to enum warning
bus: ti-sysc: Fix a build warning with W=1 for sysconfig
bus: ti-sysc: Configure uart quirks for k3 SoC
bus: ti-sysc: Build driver for TI K3 SoCs
bus: ti-sysc: Fix build warning for 64-bit build
bus: omap_l3_smx: identify timeout cause before rebooting
Link: https://lore.kernel.org/r/pull-1692158857-597450@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
-----BEGIN PGP SIGNATURE-----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=SEyF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=RpyB
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...
Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sdmmc and jtag for rk3588 (makes sdmmc unreliable).
This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves
the powerdomain drivers into a new genpd subsystem.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQxUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgaRgB/41U/lA1H0hIfXBKKBXFEDYkQMC1qEEtDnU
pi8L6Bp44Gb5JbrD4wrNMc9AUJokxC1zGEVmwpySXNOy3ma0DQRPPKNQMNo8gcae
R8bZPbpdvkBBY6HMeFI0/c0+B3qU0G/RBfaMMe0edPlaeLFz8j8TUotUJo4rGh20
RoA2Dir7/YWN1S0EIOwJVRzYnr9vG7rGJsceabyYH/liDFs7neEgCDi9LWwNIBbL
5ANWM7UytIOsZOrPOegLHLgsPyYvccHgKCgctCPt6k04/9ZBTwp6pFyBtUtd91GW
oAL7SgF5tbkDYysj3nwZGOzCUIUVlxMTs6szTge4WuzGVOhXOZrn
=5C7a
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Nt2J
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
PD_VO powerdomain for rv1126 and disabling of the automatic switch between
sdmmc and jtag for rk3588 (makes sdmmc unreliable).
This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves
the powerdomain drivers into a new genpd subsystem.
* tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
Link: https://lore.kernel.org/r/40318909.XM6RcZxFsP@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Loongson-2's power management controller was ACPI, supports ACPI
S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To
Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods
(USB, GMAC, PWRBTN, etc.). This driver was to add power management
controller support that base on dts for Loongson-2 series SoCs.
Co-developed-by: Liu Yun <liuyun@loongson.cn>
Signed-off-by: Liu Yun <liuyun@loongson.cn>
Co-developed-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Cc: soc@kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20230803063703.5659-3-zhuyinbo@loongson.cn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the Loongson-2 SoC Power Management Controller binding with DT
schema format using json-schema.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230803063703.5659-2-zhuyinbo@loongson.cn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add Hyperv-specific handling for faults caused by VMMCALL
instructions.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-9-ltykernel@gmail.com
In the AMD SEV-SNP guest, AP needs to be started up via sev es
save area and Hyper-V requires to call HVCALL_START_VP hypercall
to pass the gpa of sev es save area with AP's vp index and VTL(Virtual
trust level) parameters. Override wakeup_secondary_cpu_64 callback
with hv_snp_boot_ap.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-8-ltykernel@gmail.com
Hyper-V tsc page is shared with hypervisor and mark the page
unencrypted in sev-snp enlightened guest when it's used.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-7-ltykernel@gmail.com
In sev-snp enlightened guest, Hyper-V hypercall needs
to use vmmcall to trigger vmexit and notify hypervisor
to handle hypercall request.
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-6-ltykernel@gmail.com
Hypervisor needs to access input arg, VMBus synic event and
message pages. Mark these pages unencrypted in the SEV-SNP
guest and free them only if they have been marked encrypted
successfully.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-5-ltykernel@gmail.com
hv vp assist page needs to be shared between SEV-SNP guest and Hyper-V.
So mark the page unencrypted in the SEV-SNP guest.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-4-ltykernel@gmail.com
SEV-SNP guests on Hyper-V can run at multiple Virtual Trust
Levels (VTL). During boot, get the VTL at which we're running
using the GET_VP_REGISTERs hypercall, and save the value
for future use. Then during VMBus initialization, set the VTL
with the saved value as required in the VMBus init message.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-3-ltykernel@gmail.com
Most of the IS_METEORLAKE checks in the display code shouldn't actually
be tied to MTL as a platform, but rather to the Xe_LPD+ display IP
(which is used in MTL, but may show up again in future platforms). In
cases where we're trying to match that specific IP, use a version check
against IP_VER(14, 0). For cases where we're just handling new behavior
introduced by this IP (but which may also be inherited by future IP as
well), use a ver >= 14 check.
The one exception here is the stolen memory workaround Wa_13010847436
(which is mislabelled as "Wa_22018444074" in the code). That's truly a
MTL-specific issue rather than being tied to any of the IP blocks, so
leaving the condition as IS_METEORLAKE is correct there.
v2:
- cdclk check should be >=, not >. (Gustavo)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-19-matthew.d.roper@intel.com
Stepping-specific display behavior shouldn't be tied to MTL as a
platform, but rather specifically to the Xe_LPD+ IP. Future non-MTL
platforms may re-use this IP and will need to follow the exact same
logic and apply the same workarounds. IS_MTL_DISPLAY_STEP() is dropped
in favor of a new macro IS_DISPLAY_IP_STEP() that only checks the
display IP version.
v2:
- Rename macro to IS_DISPLAY_IP_STEP for consistency with the
corresponding GT macro and handle steppings the same way.
v3:
- Drop the automatic "STEP_" pasting.
v4:
- Implement IS_DISPLAY_IP_STEP on top of IS_DISPLAY_IP_RANGE /
IS_DISPLAY_STEP building blocks and make the parameters from/until
instead of begin/fixed. (Jani)
- Fix usage details in comment.
v5:
- Tweak macro comment. (Gustavo)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-17-matthew.d.roper@intel.com
Many of the IS_METEORLAKE conditions throughout the driver are supposed
to be checks for Xe_LPG and/or Xe_LPM+ IP, not for the MTL platform
specifically. Update those checks to ensure that the code will still
operate properly if/when these IP versions show up on future platforms.
v2:
- Update two more conditions (one for pg_enable, one for MTL HuC
compatibility).
v3:
- Don't change GuC/HuC compatibility check, which sounds like it truly
is specific to the MTL platform. (Gustavo)
- Drop a non-lineage workaround number for the OA timestamp frequency
workaround. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-20-matthew.d.roper@intel.com
Now that we properly match the Xe_LPG IP versions associated with
various workarounds, there's no longer any need to define separate MTL
subplatform in the driver. Nothing in the code is conditional on MTL-M
or MTL-P base platforms. Furthermore, I'm not sure the "M" and "P"
designations are even an accurate representation of which specific
platforms would have which IP versions; those were mostly just
placeholders from a long time ago. The reality is that the IP version
present on a platform gets read from a fuse register at driver init; we
shouldn't be trying to guess which IP is present based on PCI ID
anymore.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-18-matthew.d.roper@intel.com
Stepping-specific media behavior shouldn't be tied to MTL as a platform,
but rather specifically to the Xe_LPM+ IP. Future non-MTL platforms may
re-use this IP and will need to follow the exact same logic and apply
the same workarounds. IS_MTL_MEDIA_STEP() is dropped in favor of
IS_MEDIA_GT_IP_STEP, which checks the media IP version associated with a
specific IP and also ensures that we're operating on the media GT, not
the primary GT.
v2:
- Switch to the IS_GT_IP_STEP macro.
v3:
- Switch back to long-form IS_MEDIA_GT_IP_STEP. (Jani)
v4:
- Build IS_MEDIA_GT_IP_STEP on top of IS_MEDIA_GT_IP_RANGE and
IS_MEDIA_STEP building blocks and name the parameters from/until
rather than begin/fixed.. (Jani)
v5:
- Tweak macro comment wording. (Gustavo)
- Add a check to catch NULL gt in IS_MEDIA_GT_IP_RANGE; this allows it
to be used safely on i915->media_gt, which may be NULL on some
platforms. (Gustavo)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-16-matthew.d.roper@intel.com
Several workarounds are guarded by IS_MTL_GRAPHICS_STEP. However none
of these workarounds are actually tied to MTL as a platform; they only
relate to the Xe_LPG graphics IP, regardless of what platform it appears
in. At the moment MTL is the only platform that uses Xe_LPG with IP
versions 12.70 and 12.71, but we can't count on this being true in the
future. Switch these to use a new IS_GFX_GT_IP_STEP() macro instead
that is purely based on IP version. IS_GFX_GT_IP_STEP() is also
GT-based rather than device-based, which will help prevent mistakes
where we accidentally try to apply Xe_LPG graphics workarounds to the
Xe_LPM+ media GT and vice-versa.
v2:
- Switch to a more generic and shorter IS_GT_IP_STEP macro that can be
used for both graphics and media IP (and any other kind of GTs that
show up in the future).
v3:
- Switch back to long-form IS_GFX_GT_IP_STEP macro. (Jani)
- Move macro to intel_gt.h. (Andi)
v4:
- Build IS_GFX_GT_IP_STEP on top of IS_GFX_GT_IP_RANGE and
IS_GRAPHICS_STEP building blocks and name the parameters from/until
rather than begin/fixed. (Jani)
- Fix usage examples in comment.
v5:
- Tweak comment on macro. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-15-matthew.d.roper@intel.com
Although some of our Xe_LPG workarounds were already being applied based
on IP version correctly, others were matching on MTL as a base platform,
which is incorrect. Although MTL is the only platform right now that
uses Xe_LPG IP, this may not always be the case. If a future platform
re-uses this graphics IP, the same workarounds should be applied, even
if it isn't a "MTL" platform.
We were also incorrectly applying Xe_LPG workarounds/tuning to the
Xe_LPM+ media IP in one or two places; we should make sure that we don't
try to apply graphics workarounds to the media GT and vice versa where
they don't belong. A new helper macro IS_GT_IP_RANGE() is added to help
ensure this is handled properly -- it checks that the GT matches the IP
type being tested as well as the IP version falling in the proper range.
Note that many of the stepping-based workarounds are still incorrectly
checking for a MTL base platform; that will be remedied in a later
patch.
v2:
- Rework macro into a slightly more generic IS_GT_IP_RANGE() that can
be used for either GFX or MEDIA checks.
v3:
- Switch back to separate macros for gfx and media. (Jani)
- Move macro to intel_gt.h. (Andi)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-14-matthew.d.roper@intel.com
The workaround bounds for Wa_22011802037 are somewhat complex and are
replicated in several places throughout the code. Pull the condition
out to a helper function to prevent mistakes if this condition needs to
change again in the future.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-12-matthew.d.roper@intel.com
Merge series from Yang Yingliang <yangyingliang@huawei.com>:
I'm trying to rename the legacy name to modern name used in SPI drivers,
this is part4 patchset.
After introducing devm_spi_alloc_host/spi_alloc_host(), the legacy
named function devm_spi_alloc_master/spi_alloc_master() can be replaced.
And also change other legacy name master/slave to modern name host/target
or controller. Each patch compile test passed.
Merge series from like@awinic.com:
Add regulator driver for the device Awinic AW37503 which is
single inductor - dual output power supply device. AW37503
device is designed to support general positive/negative
driven applications like TFT display panels.
Jiri Olsa says:
====================
bpf: Add multi uprobe link
hi,
this patchset is adding support to attach multiple uprobes and usdt probes
through new uprobe_multi link.
The current uprobe is attached through the perf event and attaching many
uprobes takes a lot of time because of that.
The main reason is that we need to install perf event for each probed function
and profile shows perf event installation (perf_install_in_context) as culprit.
The new uprobe_multi link just creates raw uprobes and attaches the bpf
program to them without perf event being involved.
In addition to being faster we also save file descriptors. For the current
uprobe attach we use extra perf event fd for each probed function. The new
link just need one fd that covers all the functions we are attaching to.
v7 changes:
- fixed task release on error path and re-org the error
path to be more straightforward [Yonghong]
- re-organized uprobe_prog_run locking to follow general pattern
and removed might_fault check as it's not needed in uprobe/task
context [Yonghong]
There's support for bpftrace [2] and tetragon [1].
Also available at:
https://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
uprobe_multi
thanks,
jirka
[1] https://github.com/cilium/tetragon/pull/936
[2] https://github.com/iovisor/bpftrace/compare/master...olsajiri:bpftrace:uprobe_multi
[3] https://lore.kernel.org/bpf/20230628115329.248450-1-laoar.shao@gmail.com/
---
====================
Link: https://lore.kernel.org/r/20230809083440.3209381-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attaching extra program to same functions system wide for api
and link tests.
This way we can test the pid filter works properly when there's
extra system wide consumer on the same uprobe that will trigger
the original uprobe handler.
We expect to have the same counts as before.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-29-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Running api and link tests also with pid filter and checking
the probe gets executed only for specific pid.
Spawning extra process to trigger attached uprobes and checking
we get correct counts from executed programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-28-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test for cookies setup/retrieval in uprobe_link uprobes
and making sure bpf_get_attach_cookie works properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-27-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that attaches 50k usdt probes in usdt_multi binary.
After the attach is done we run the binary and make sure we get
proper amount of hits.
With current uprobes:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
1353.659680562 seconds time elapsed
With uprobe_multi link:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
0.322046364 seconds time elapsed
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-26-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding code in uprobe_multi test binary that defines 50k usdts
and will serve as attach point for uprobe_multi usdt bench test
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-25-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that attaches 50k uprobes in uprobe_multi binary.
After the attach is done we run the binary and make sure we
get proper amount of hits.
The resulting attach/detach times on my setup:
test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec
test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec
test_bench_attach_uprobe:PASS:uprobes_count 0 nsec
test_bench_attach_uprobe: attached in 0.346s
test_bench_attach_uprobe: detached in 0.419s
#262/5 uprobe_multi_test/bench_uprobe:OK
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-24-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test program that defines 50k uprobe_multi_func_*
functions and will serve as attach point for uprobe_multi bench test
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-23-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for bpf_link_create attach function.
Testing attachment using the struct bpf_link_create_opts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-22-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for bpf_program__attach_uprobe_multi
attach function.
Testing attachment using glob patterns and via bpf_uprobe_multi_opts
paths/syms fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-21-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for skeleton load/attach functions,
to test skeleton auto attach for uprobe_multi link.
Test that bpf_get_func_ip works properly for uprobe_multi
attachment.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-20-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We'd like to have single copy of get_time_ns used b bench and test_progs,
but we can't just include bench.h, because of conflicting 'struct env'
objects.
Moving get_time_ns to testing_helpers.h which is being included by both
bench and test_progs objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-19-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support for usdt_manager_attach_usdt to use uprobe_multi
link to attach to usdt probes.
The uprobe_multi support is detected before the usdt program is
loaded and its expected_attach_type is set accordingly.
If uprobe_multi support is detected the usdt_manager_attach_usdt
gathers uprobes info and calls bpf_program__attach_uprobe to
create all needed uprobes.
If uprobe_multi support is not detected the old behaviour stays.
Also adding usdt.s program section for sleepable usdt probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-18-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe-multi link detection. It will be used later in
bpf_program__attach_usdt function to check and use uprobe_multi
link over standard uprobe links.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-17-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support for several uprobe_multi program sections
to allow auto attach of multi_uprobe programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>