The range and the defaults are specified in the description instead of
being specified in the schema.
Fix it by adding the default value in the `default` field and specifying
the range as `minimum` and `maximum`.
Fixes: b331b8ef86 ("dt-bindings: net: convert rockchip-dwmac to json-schema")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both the patform_driver and mipi_dsi_driver structures contain pointers
to the match table used, so the custom code to obtain match and match
data can be replaced by calls to of_device_get_match_data().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64ded5b7e809e4c6e915b2c4d8b82e02319cd206.1690535800.git.geert+renesas@glider.be
If CONFIG_FB_CORE=y and CONFIG_FB=n, the frame buffer bootup logos can
no longer be enabled. Fix this by making CONFIG_LOGO depend on
CONFIG_FB_CORE instead of CONFIG_FB, as there is no good reason for the
logo code to depend on the presence of real frame buffer device drivers.
Fixes: 55bffc8170 ("fbdev: Split frame buffer support in FB and FB_CORE symbols")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e4142b7cc9aad9975de1bc6b1c7d86ccee487e4c.1690535997.git.geert+renesas@glider.be
All debug messages in drm_gem_framebuffer_helper.c use drm_dbg_kms(),
except for one, which uses drm_dbg().
Replace the outlier by drm_dbg_kms() to restore consistency.
Fixes: c91acda3a3 ("drm/gem: Check for valid formats")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d56615fbef2d4d0e5f4c4a23f57269bf8bdb71f.1690535176.git.geert+renesas@glider.be
There are some __iomem type casting being missed in previous patch.
Fix them here.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307020639.QCZOKp8B-lkp@intel.com/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since commit 35508d2424 ("MIPS: loongson32: ls1c: Fix hang
during startup"), no one is calling ls1x_rtc_set_extclk().
Therefore, remove this obsolete function.
Since commit 9fb2309065 ("rtc: Remove the Loongson-1
RTC driver"), no one is using regs-rtc.h.
Therefore, remove this obsolete header file.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since commit c46496119e ("clk: loongson1: Remove
the outdated driver"), no one is using regs-clk.h.
Therefore, remove this obsolete header file.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
A couple more clean-ups in the MIPS code.
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 657c45b303 ("MIPS: Explicitly include correct DT includes")
removed a necessary include by mistake and missed adding an explicit
include of spinlock.h (from of.h -> kobject.h -> spinlock.h).
Fixes: 657c45b303 ("MIPS: Explicitly include correct DT includes")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The lp855x_bl_update_status function's return type is int, but
it always returns 0, without checking for the results of the
write_byte/pwm_ctrl functions called within.
Make this function return the return values of the functions it
calls, and modify the lp855x_pwm_ctrl function to return errors.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230714121440.7717-3-aweber.kernel@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
As pointed out by Uwe Kleine-König[1], the changes introduced in
commit c1ff7da03e ("video: backlight: lp855x: Get PWM for PWM mode
during probe") caused the PWM state set up by the bootloader to be
re-set when the driver is probed. This differs from the behavior from
before that patch, where the PWM state would be initialized on the
first brightness change.
Fix this by moving the PWM state initialization into the PWM control
function. Add a new variable, needs_pwm_init, to the device info struct
to allow us to check whether we need the initialization, or whether it
has already been done.
[1] https://lore.kernel.org/lkml/20230614083953.e4kkweddjz7wztby@pengutronix.de/
Fixes: c1ff7da03e ("video: backlight: lp855x: Get PWM for PWM mode during probe")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230714121440.7717-2-aweber.kernel@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174651.4058753-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175029.4065326-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Symbol ARCH_BCM4908 has been merged/removed without updating leds
Kconfig.
Fixes: dd5c672d7c ("arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230714063214.3791-1-zajec5@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmTDclgTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6C9xB/40NJBrFJknDzF9hVHL7aynsJAi3qJ1
T5U061NIVWSjPKOcIbKHX9I7c9KBh+jv+GhxLSlpDq0f+6JYNlNXykowVIaq76Kk
gVYXxBu1MXJqkxKH9qy4WxpNZVa7XjXOzRm/wEg34cMsN9S5EX9BNsJgvHH+/6OH
S9UUpbr0AfngsYxPGMcoXUMDBD0o2Cf5orp+Ml9o9IdwbgGlojgRtMYK6G/BL+TF
vZCS6jb6bBe5VSnoD5qDMRExtgIyCvXHG2s8BYk/4XkKfMBKKJoFFMZD+2z3HAk8
02de5h/eqMbta03w/+4DaQklb2Gvk8wkT3w1Nn67+lEutC/xyMiNL89D
=lD7D
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.6-20230728' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
linux-can-next-for-6.6-20230728
Marc Kleine-Budde says:
====================
Hello netdev-team,
this is a pull request of 21 patches for net-next/master.
The 1st patch is by Gerhard Uttenthaler, which adds Gerhard as the
maintainer ems_pci driver.
Peter Seiderer's patch removes a unused function from the peak_usb
driver.
The next 4 patches are by John Watts and add support for the sun4i_can
driver on the Allwinner D1.
Rob Herring's patch corrects the DT includes in various CAN drivers.
Followed by 14 patches from me concerning the gs_usb driver. The first
11 are various cleanups consisting of coding style improvements, error
path printout cleanups, and removal of unneeded
usb_kill_anchored_urbs(). The last 3 convert the driver to use NAPI to
avoid out-of-order reception of CAN frames.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is used for the Siemens Simatic IPC BX-21A, which has its LEDs
connected to GPIOs provided by the Intel Elkhart Lake pinctrl driver.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230713115639.16419-3-henning.schild@siemens.com
Signed-off-by: Lee Jones <lee@kernel.org>
Martin Habets says:
====================
sfc: Remove Siena bits from sfc.ko
Last year we split off Siena into it's own driver under directory siena.
This patch series removes the now unused Falcon and Siena code from sfc.ko.
No functional changes are intended.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It was only used for Siena SRIOV, so nothing includes it any more
in this directory.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the Falcon locking description does not apply to EF10.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove comments that only apply to Falcon and Siena.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The attributes index and entries are no longer needed, so use
struct efx_buffer instead.
next_buffer_table was also Siena specific.
Removed some checkpatch warnings.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
unicast_filter and multicast_hash are no longer needed.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The special handling for SRIOV reset and FLR is not needed on EF10.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rx_tx_inline is now always true.
The special event list is no longer needed, event handling is always
inline.
Event MCDI_EVENT_CODE_PTP_RX is no longer needed.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The workarounds for bug 8568 and 17213 are no longer needed.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This also removes TC support code, since that was never supported for EF10.
TC support for EF100 is not handled from efx.c.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are no longer used, and the two Siena specific functions are
no longer present in sfc.ko.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Siena was using functions from the Falcon architecture.
These start with the efx_farch prefix.
Now that both of these are in separate modules the references
are no longer used in the sfc.ko module.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support matching V4L2 async sub-devices based on particular fwnode
endpoint. This makes it possible to instantiate multiple V4L2 sub-devices
based on given fwnode endpoints from a single device, based on driver
needs.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When an async sub-device is registered, it used to be that the first one
of its connections were matched when found. Continue looking for matches
until a notifier no longer has any.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This was introduced in commit 0369f6a34b ("arm64: KVM: EL2 register
definitions") and for more than 10 years nobody used. Remove it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724142257.1551-1-yuzenghui@huawei.com
In kvm_arch_vcpu_load(), it has the parameter cpu which is the value of
smp_processor_id(), so no need to get it again. Simply replace it.
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230727090754.1900310-1-shahuang@redhat.com
The list entry is initialised as a head in v4l2_async_register_subdev()
just before being added to the list. This isn't needed, drop the
initialisation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the v4l2-async framework was introduced, the use case for it was to
connect a camera sensor with a parallel receiver. Both tended to be rather
simple devices with a single connection between them.
The framework has been since improved in multiple ways but there are
limitations that have remained, for instance the assumption an async
sub-device is connected towards a single notifier and via a single link
only.
This patch enables connecting a sub-device to one or more notifiers
simultaneously, with one or more connections per notifier. The notifier
information is moved from the sub-device to the connection and the
connections in sub-device are no longer a pointer but a linked list.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add v4l2_async_connection_unique() function for obtaining a struct
v4l2_async_connection, typically allocated by drivers together with their
own information on an external sub-device.
The relation between connections and sub-devices still remains 1:1 but
this code becomes more complex when the relation soon changes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch re-arranges internal V4L2 async lists for preparation of
supporting multiple connections per sub-device as well as cleaning up used
lists.
The list of unbound V4L2 sub-devices shall be maintained for the purpose of
listing those sub-devices only, not for their bindin status. Also, the V4L2
async connections now have, instead of two list entries, a single list
entry in the notifier's list, be that either waiting or done lists, while
the notifier's asc_list is removed.
The one-to-one relation between a sub-device and a connection is still
maintained in this patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The connections are checked for duplicates already when the notifier is
registered. This is effectively a sanity check for driver (and possibly
obscure firmware) bugs. Don't do this when adding the connection.
Retain the int return type for now. It'll be needed very soon again.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rename v4l2_async_subdev as v4l2_async_connection, in order to
differentiate between the sub-devices and their connections: one
sub-device can have many connections but the V4L2 async framework has so
far allowed just a single one. Connections in this context will later
translate into either MC ancillary or data links.
This patch prepares changing that relation by changing existing users of
v4l2_async_subdev to switch to v4l2_async_connection. Async sub-devices
themselves will not be needed anymore
Additionally, __v4l2_async_nf_add_subdev() has been renamed
__v4l2_async_nf_add_connection().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
V4L2 async sub-device matching originally used the device nodes only.
Endpoint nodes were taken into use instead as using the device nodes was
problematic for it was in some cases ambiguous which link might have been
in question.
There is however no need to use endpoint nodes on both sides, as the async
sub-device's fwnode can always be trivially obtained using
fwnode_graph_get_remote_endpoint() when needed while what counts is
whether or not the link is between two device nodes, i.e. the device nodes
match.
This will briefly break the adv748x driver but it will be fixed later in
the set, by patch "media: adv748x: Return to endpoint matching".
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The naming of list heads and list entries is confusing as they're named
similarly. Use _list for list head and _entry for list entries.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Pass only information required for sub-device matching to functions
checking whether the async sub-device already exists. Do the same for
debug message printing. This makes further changes to other aspects of
async sub-devices easier.
Accordingly, also perform further renames:
asd_equal as v4l2_async_match_equal,
v4l2_async_nf_has_async_subdev as v4l2_async_nf_has_async_match,
__v4l2_async_nf_has_async_subdev as
v4l2_async_nf_has_async_subdev_entry and
v4l2_async_nf_asd_valid as v4l2_async_nf_match_valid.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The async match type is a struct field now, rename V4L2_ASYNC_MATCH_*
macros as V4L2_ASYNC_MATCH_TYPE_* instead.
This patch has been produced by:
git grep -l V4L2_ASYNC_MATCH_ -- drivers/media/ drivers/staging/media/ \
include/ Documentation/|xargs perl -i -pe \
's/V4L2_ASYNC_MATCH_\K/TYPE_/g'
so it must be correct.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make V4L2 async match information a struct, making it easier to use it
elsewhere outside the scope of struct v4l2_async_subdev.
Also remove an obsolete comment --- none of these fields are supposed to
be touched by drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Since few years no one is really paid to support drivers for: Maxim
MUICs/PMICs for Exynos based boards and Samsung PMICs. Correct the
status to keep them as maintained.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230714050313.8424-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There's a need to verify that a single async sub-device isn't being added
multiple times, this would be an error. This takes place at the time of
adding the async sub-device to the notifier's list as well as when the
notifier is added to the global notifier's list.
Use the pointer to the sub-device for testing this instead of an index to
an array that is long gone. (There was an array of async sub-devices in
the notifier before it was converted to a linked list by commit
66beb323e4 ("media: v4l2: async: Remove notifier subdevs array").)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Just add some debug prints for V4L2 async sub-device matching process.
These might come useful in figuring out why things don't work as expected.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>