Commit graph

1,267,977 commits

Author SHA1 Message Date
Linus Torvalds
bde7f15027 Power management fixes for 6.5-rc2
- Unbreak the /sys/power/resume interface after recent changes (Azat
    Khuzhin).
 
  - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
    Yang).
 
  - Remove __init from cpufreq callbacks in the sparc driver, because
    they may be called after initialization too (Viresh Kumar).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmSxhIcSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxfdQP/1+MxGLh2XVVKvB9QTI0/ofYPxPfoTuf
 5Sf2lOa7rNeauc2xnQFM6EMOeme4ckTUbrO7AkZVACYVqbKJ92IUBJfo3R2Ar+1Z
 9TogwG+YOX3OjR8QtiGHLwA5fvOgbt89JaDn2ZCWcS+gHARZ3VMgdbDt+C3MUldV
 UVr/5kAkWefv39PIYHCwAJU7Xhn97B5nW58KgpkHuxOcHDKe0VfdxLcKBsyoc6QE
 IGMVV2WtnoyEdM1aNfZ37+3NksiIdZMA6OvM5C/7HOs6IqJaFxVUxm4333sM5AW9
 y5LPYSBbedVxICdLkUUq8W5MDRNCTPXgC3gexEu0XtWdAV9AG+9aNeZytT7KGrLO
 xe4vbl6s1LnxC6YBw2bB+U/DbLtxQrAP1nYZj6yxhbHVsnTTZg7Qvevz7nAdPlOL
 3FsutIT+9OQprWXxYBRv3AumF+hpG1bm8Zutyaqb2vwRwMbbXWTpzRry4ydp6bTj
 VB2YWeQOxCKl+dC5jXM1wfPjbsqWQvvGZVh1VIzlcZgzqALWf+F5fTMUKuY963kd
 V6fR1YmKg+Xxb+BU9mEjaUMfH5Yr8Mv9Gpf7D87MTsNTluFjAmRWk5a0ahVAXcwe
 n1jFxBNUsuJuvz2KwWrVZExT2xqJ8kVfnOxNcevtaXK+uk8+jE94lwjJn0P9v8w8
 e+0QABkgUYY2
 =b/om
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix hibernation (after recent changes), frequency QoS and the
  sparc cpufreq driver.

  Specifics:

   - Unbreak the /sys/power/resume interface after recent changes (Azat
     Khuzhin).

   - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
     Yang).

   - Remove __init from cpufreq callbacks in the sparc driver, because
     they may be called after initialization too (Viresh Kumar)"

* tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: sparc: Don't mark cpufreq callbacks with __init
  PM: QoS: Restore support for default value on frequency QoS
  PM: hibernate: Fix writing maj:min to /sys/power/resume
2023-07-14 11:07:04 -07:00
Ivan Vecera
efb6f4a359 i40e: Wait for pending VF reset in VF set callbacks
Commit 028daf8011 ("i40e: Fix attach VF to VM issue") fixed
a race between i40e_ndo_set_vf_mac() and i40e_reset_vf() during
an attachment of VF device to VM. This issue is not related to
setting MAC address only but also VLAN assignment to particular
VF because the newer libvirt sets configured MAC address as well
as an optional VLAN. The same behavior is also for i40e's
.ndo_set_vf_rate and .ndo_set_vf_spoofchk where the callbacks
just check if the VF was initialized but not wait for the finish
of pending reset.

Reproducer:
[root@host ~]# virsh attach-interface guest hostdev --managed 0000:02:02.0 --mac 52:54:00:b4:aa:bb
error: Failed to attach interface
error: Cannot set interface MAC/vlanid to 52:54:00:b4:aa:bb/0 for ifname enp2s0f0 vf 0: Resource temporarily unavailable

Fix this issue by using i40e_check_vf_init_timeout() helper to check
whether a reset of particular VF was finished in i40e's
.ndo_set_vf_vlan, .ndo_set_vf_rate and .ndo_set_vf_spoofchk callbacks.

Tested-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14 10:15:06 -07:00
Rafael J. Wysocki
d121758da6 Merge branches 'pm-sleep' and 'pm-qos'
Merge a PM QoS fix and a hibernation fix for 6.5-rc2.

 - Unbreak the /sys/power/resume interface after recent changes (Azat
   Khuzhin).

 - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
   Yang).

* pm-sleep:
  PM: hibernate: Fix writing maj:min to /sys/power/resume

* pm-qos:
  PM: QoS: Restore support for default value on frequency QoS
2023-07-14 19:13:21 +02:00
Konrad Dybcio
611c148b77 dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6350 bwmon instances
SM6350 has a BWMONv4 for LLCC and a BWMONv5 for CPU. Document them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-2-bd4bb96b0673@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-07-14 20:10:02 +03:00
Konrad Dybcio
3740a791d6 dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8250 bwmon instances
SM8250 has a BWMONv5 for LLCC and a BWMONv4 for CPU. Document them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-1-bd4bb96b0673@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-07-14 20:09:57 +03:00
David Xu
676b7c5eca platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551
The current code assumes that the CSC3551(multiple cs35l41) always have
its interrupt pin connected to GPIO thus the IRQ can be acquired with
acpi_dev_gpio_irq_get. However on some newer laptop models this is no
longer the case as they have the CSC3551's interrupt pin connected to
APIC. This causes smi_i2c_probe to fail on these machines.

To support these machines, a new macro IRQ_RESOURCE_AUTO was introduced
for cs35l41 smi_node, and smi_get_irq function was modified so it tries
to get GPIO irq resource first and if failed, tries to get
APIC irq resource for cs35l41.

This patch affects only the cs35l41's probing and brings no negative
influence on machines that indeed have the cs35l41's interrupt pin
connected to GPIO.

Signed-off-by: David Xu <xuwd1@hotmail.com>
Link: https://lore.kernel.org/r/SY4P282MB18350CD8288687B87FFD2243E037A@SY4P282MB1835.AUSP282.PROD.OUTLOOK.COM
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-14 19:09:04 +02:00
Michal Wilczynski
9d67b6acf1 ACPI: thermal: Install Notify() handler directly
Modify the ACPI thermal driver to install its own Notify() handler
directly instead of providing an ACPI driver .notify() callback.

This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the thermal driver to be switched over to a platform one
in the future.

While at it, fix up whitespaces in acpi_thermal_remove().

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 19:08:52 +02:00
Ivan Vecera
df84f0ce56 i40e: Add helper for VF inited state check with timeout
Move the check for VF inited state (with optional up-to 300ms
timeout to separate helper i40e_check_vf_init_timeout() that
will be used in the following commit.

Tested-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14 10:08:46 -07:00
Michal Wilczynski
1c28250403 ACPI: NFIT: Remove unnecessary .remove callback
The ACPI NFIT driver provides an empty function as it's .remove() callback
which is not necessary, so drop the empty acpi_nfit_remove() and the
.remove() callback initialization from it.

Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 18:58:35 +02:00
Michal Wilczynski
dcca12ab62 ACPI: NFIT: Install Notify() handler directly
Modify the ACPI NFIT driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.

This will allow the ACPI driver .notify() callback to be eliminated.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 18:58:34 +02:00
Michal Wilczynski
898ff0f005 ACPI: HED: Install Notify() handler directly
Modify the ACPI HED driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.

This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the HED driver to be switched over to a platform one in
the future.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 18:58:34 +02:00
Michal Wilczynski
1066625155 ACPI: battery: Install Notify() handler directly
Modify the ACPI battery driver to install its own Notify() handler
directly instead of providing an ACPI driver .notify() callback.

This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the battery driver to be switched over to a platform one
in the future.

While at it, fix up whitespaces in acpi_battery_remove().

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 18:58:34 +02:00
Michal Wilczynski
6f70168197 ACPI: video: Install Notify() handler directly
Modify the ACPI video driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.

This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the ideo driver to be switched over to a platform one in
the future.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 18:58:34 +02:00
Michal Wilczynski
543a2d115a ACPI: AC: Install Notify() handler directly
Modify the ACPI AC driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.

This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the AC driver to be switched over to a platform one in the
future.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 18:58:34 +02:00
Michal Wilczynski
0d16710146 ACPI: bus: Set driver_data to NULL every time .add() fails
Most ACPI drivers set driver_data in their .add() callbacks, but usually
they don't clear it in the error code path.

Set driver_data to NULL in acpi_device_probe() to prevent stale pointers
from staying around.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 18:58:34 +02:00
Michal Wilczynski
c542ce36a9 ACPI: bus: Introduce wrappers for ACPICA notify handler install/remove
Introduce new functions acpi_dev_install_notify_handler() and
acpi_dev_remove_notify_handler(), to install and remove, respectively,
a handler for AML Notify() operations targeted at a given ACPI device
object. They will allow drivers to install Notify() handlers directly
instead of providing an ACPI driver .notify() callback to be invoked
in the context of a Notify() handler installed by the ACPI bus type
code. In particular, this will help platform drivers to provide
Notify() handlers for the ACPI companions of the platform devices
they bind to.

These functions are replacements for acpi_device_install_notify_handler()
and acpi_device_remove_notify_handler(), respectively, and after all
drivers switch over to using them, the old ones will be dropped.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 18:58:34 +02:00
Michal Swiatkowski
b3e7b3a6ee ice: prevent NULL pointer deref during reload
Calling ethtool during reload can lead to call trace, because VSI isn't
configured for some time, but netdev is alive.

To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors
to 0 after freeing and add a check for ::tx/rx_rings in ring related
ethtool ops.

Add proper unroll of filters in ice_start_eth().

Reproduction:
$watch -n 0.1 -d 'ethtool -g enp24s0f0np0'
$devlink dev reload pci/0000:18:00.0 action driver_reinit

Call trace before fix:
[66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000
[66303.926259] #PF: supervisor read access in kernel mode
[66303.926286] #PF: error_code(0x0000) - not-present page
[66303.926311] PGD 0 P4D 0
[66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI
[66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G           OE      6.4.0-rc5+ #1
[66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018
[66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice]
[66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48
[66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246
[66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48
[66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000
[66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000
[66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000
[66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50
[66303.926906] FS:  00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000
[66303.926941] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0
[66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[66303.927060] PKRU: 55555554
[66303.927075] Call Trace:
[66303.927094]  <TASK>
[66303.927111]  ? __die+0x23/0x70
[66303.927140]  ? page_fault_oops+0x171/0x4e0
[66303.927176]  ? exc_page_fault+0x7f/0x180
[66303.927209]  ? asm_exc_page_fault+0x26/0x30
[66303.927244]  ? ice_get_ringparam+0x22/0x50 [ice]
[66303.927433]  rings_prepare_data+0x62/0x80
[66303.927469]  ethnl_default_doit+0xe2/0x350
[66303.927501]  genl_family_rcv_msg_doit.isra.0+0xe3/0x140
[66303.927538]  genl_rcv_msg+0x1b1/0x2c0
[66303.927561]  ? __pfx_ethnl_default_doit+0x10/0x10
[66303.927590]  ? __pfx_genl_rcv_msg+0x10/0x10
[66303.927615]  netlink_rcv_skb+0x58/0x110
[66303.927644]  genl_rcv+0x28/0x40
[66303.927665]  netlink_unicast+0x19e/0x290
[66303.927691]  netlink_sendmsg+0x254/0x4d0
[66303.927717]  sock_sendmsg+0x93/0xa0
[66303.927743]  __sys_sendto+0x126/0x170
[66303.927780]  __x64_sys_sendto+0x24/0x30
[66303.928593]  do_syscall_64+0x5d/0x90
[66303.929370]  ? __count_memcg_events+0x60/0xa0
[66303.930146]  ? count_memcg_events.constprop.0+0x1a/0x30
[66303.930920]  ? handle_mm_fault+0x9e/0x350
[66303.931688]  ? do_user_addr_fault+0x258/0x740
[66303.932452]  ? exc_page_fault+0x7f/0x180
[66303.933193]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fixes: 5b246e533d ("ice: split probe into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14 09:56:20 -07:00
Petr Oros
24a3298ac9 ice: Unregister netdev and devlink_port only once
Since commit 6624e780a5 ("ice: split ice_vsi_setup into smaller
functions") ice_vsi_release does things twice. There is unregister
netdev which is unregistered in ice_deinit_eth also.

It also unregisters the devlink_port twice which is also unregistered
in ice_deinit_eth(). This double deregistration is hidden because
devl_port_unregister ignores the return value of xa_erase.

[   68.642167] Call Trace:
[   68.650385]  ice_devlink_destroy_pf_port+0xe/0x20 [ice]
[   68.655656]  ice_vsi_release+0x445/0x690 [ice]
[   68.660147]  ice_deinit+0x99/0x280 [ice]
[   68.664117]  ice_remove+0x1b6/0x5c0 [ice]

[  171.103841] Call Trace:
[  171.109607]  ice_devlink_destroy_pf_port+0xf/0x20 [ice]
[  171.114841]  ice_remove+0x158/0x270 [ice]
[  171.118854]  pci_device_remove+0x3b/0xc0
[  171.122779]  device_release_driver_internal+0xc7/0x170
[  171.127912]  driver_detach+0x54/0x8c
[  171.131491]  bus_remove_driver+0x77/0xd1
[  171.135406]  pci_unregister_driver+0x2d/0xb0
[  171.139670]  ice_module_exit+0xc/0x55f [ice]

Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14 09:45:10 -07:00
Shyam Prasad N
69cba9d3c1 cifs: fix mid leak during reconnection after timeout threshold
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.

This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.

This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.

Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.

Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.

Fixes: 8e670f77c4 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-14 11:25:08 -05:00
Ryan Roberts
f13be0ad53 selftests/mm: give scripts execute permission
When run under run_vmtests.sh, test scripts were failing to run with
"permission denied" due to the scripts not being executable.

It is also annoying not to be able to directly invoke run_vmtests.sh,
which is solved by giving also it the execute permission.

Link: https://lkml.kernel.org/r/20230713135440.3651409-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-14 09:24:31 -07:00
Shyam Prasad N
c071b34f62 cifs: is_network_name_deleted should return a bool
Currently, is_network_name_deleted and it's implementations
do not return anything if the network name did get deleted.
So the function doesn't fully achieve what it advertizes.

Changed the function to return a bool instead. It will now
return true if the error returned is STATUS_NETWORK_NAME_DELETED
and the share (tree id) was found to be connected. It returns
false otherwise.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-14 11:24:14 -05:00
Dan Carpenter
73274c33d9 accel/qaic: Fix a leak in map_user_pages()
If get_user_pages_fast() allocates some pages but not as many as we
wanted, then the current code leaks those pages.  Call put_page() on
the pages before returning.

Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q+ZuONTsBG+1T@moroto
2023-07-14 10:14:58 -06:00
Dan Carpenter
47d87f71d0 accel/qaic: Add consistent integer overflow checks
The encode_dma() function has integer overflow checks.  The
encode_passthrough(), encode_activate() and encode_status() functions
did not.  I added integer overflow checking everywhere.  I also
updated the integer overflow checking in encode_dma() to use size_add()
so everything is consistent.

Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
[jhugo: tweak if in encode_dma() to match existing style]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q7IsPkj6WSCcL@moroto
2023-07-14 10:12:05 -06:00
Linus Torvalds
3a97a2993e drm fixes for 6.5-rc2
fbdev:
 - dma: Fix documented default preferred_bpp value
 
 ttm:
 - fix warning that we shouldn't mix && and ||
 - never consider pinned BOs for eviction&swap
 - Don't leak a resource on eviction error
 - Don't leak a resource on swapout move error
 - fix bulk_move corruption when adding a entry
 
 client:
 - Send hotplug event after registering a client
 
 dma-buf:
 - keep the signaling time of merged fences v3
 - fix an error pointer vs NULL bug
 
 sched:
 - wait for all deps in kill jobs
 - call set fence parent from scheduled
 
 i915:
 - Don't preserve dpll_hw_state for slave crtc in Bigjoiner
 - Consider OA buffer boundary when zeroing out reports
 - Remove dead code from gen8_pte_encode
 - Fix one wrong caching mode enum usage
 
 amdgpu:
 - SMU i2c locking fix
 - Fix a possible deadlock in process restoration for ROCm apps
 - Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)
 
 nouveau:
 - disp: fix HDMI on gt215+
 - disp/g94: enable HDMI
 - acr: Abort loading ACR if no firmware was found
 - bring back blit subchannel for pre nv50 GPUs
 - Fix drm_dp_remove_payload() invocation
 
 ivpu:
 - Fix VPU register access in irq disable
 - Clear specific interrupt status bits on C0
 
 bridge:
 - dw_hdmi: fix connector access for scdc
 - ti-sn65dsi86: Fix auxiliary bus lifetime
 
 panel:
 - simple: Add connector_type for innolux_at043tn24
 - simple: Add Powertip PH800480T013 drm_display_mode flags
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmSwzZUACgkQDHTzWXnE
 hr7l4g/7BHV7ZF3Zmie/KKUzbukOiTnbfNoIUv3F3I4SRaKHTHpwvNt6SsCH0tfk
 6My+bJavsU2qQ2muoJq9zr53rLOdI9Wt2G7Bmk6WZsd/DbeaoIDpThUErUV66aHN
 hHpdnqZnL5ASCn7wX2pfsEf+m6CbqimCxRX3AGLxleon/QBRJ+K6LM2K2Huzjbzx
 Pf67oLnS3DrAvN8xkWbeYib7acwo+JjD7Z0bWLdglJ05WhLhzH/P1VvmPRGruqze
 h2Tokn/671YJl01GWw+UmBUSaII/9Gaa6c2W6WYq10R/wU1C5AsMiAFdwtjLkV0z
 InQoyHxQz0m69XSjAdU5IVGBDsCEYccJ0c7qPxe1efLhoE3eLHhkKZ2EyxgN5/ln
 n2uoM0DdCZaRGrIvrDkpxbHOrX8LyTVBA4b3SegXIN6g4DjYFMvtg+xxv7BaaRCN
 8Dzq1MVgcFfAs+ld9xyw93TyhZFFHvjMMwT1EhQjUiRHIAQncmnforlAtf9kC8fD
 CN9R/s+NYa8Crr9iRIZ0Eylv9ZjaQeXkxjWeFcqMmBU+m4b/uiW/oaM3ILhUh/IS
 22AOxzY/g2yi2B6WRUhhWTuqUtYhnJ7rPN3/EndD9FUsIyKV3+PVK8q9Au0LqfyH
 Mfq4ToSyz+TMhv2gQcZACsAt9QP/fE9HDGfdeEGjUiaIpMXnGeI=
 =LPvb
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "There were a bunch of fixes lined up for 2 weeks, so we have quite a
  few scattered fixes, mostly amdgpu and i915, but ttm has a bunch and
  nouveau makes an appearance.

  So a bit busier than usual for rc2, but nothing seems out of the
  ordinary.

  fbdev:
   - dma: Fix documented default preferred_bpp value

  ttm:
   - fix warning that we shouldn't mix && and ||
   - never consider pinned BOs for eviction&swap
   - Don't leak a resource on eviction error
   - Don't leak a resource on swapout move error
   - fix bulk_move corruption when adding a entry

  client:
   - Send hotplug event after registering a client

  dma-buf:
   - keep the signaling time of merged fences v3
   - fix an error pointer vs NULL bug

  sched:
   - wait for all deps in kill jobs
   - call set fence parent from scheduled

  i915:
   - Don't preserve dpll_hw_state for slave crtc in Bigjoiner
   - Consider OA buffer boundary when zeroing out reports
   - Remove dead code from gen8_pte_encode
   - Fix one wrong caching mode enum usage

  amdgpu:
   - SMU i2c locking fix
   - Fix a possible deadlock in process restoration for ROCm apps
   - Disable PCIe lane/speed switching on Intel platforms (the platforms
     don't support it)

  nouveau:
   - disp: fix HDMI on gt215+
   - disp/g94: enable HDMI
   - acr: Abort loading ACR if no firmware was found
   - bring back blit subchannel for pre nv50 GPUs
   - Fix drm_dp_remove_payload() invocation

  ivpu:
   - Fix VPU register access in irq disable
   - Clear specific interrupt status bits on C0

  bridge:
   - dw_hdmi: fix connector access for scdc
   - ti-sn65dsi86: Fix auxiliary bus lifetime

  panel:
   - simple: Add connector_type for innolux_at043tn24
   - simple: Add Powertip PH800480T013 drm_display_mode flags"

* tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
  drm/nouveau: bring back blit subchannel for pre nv50 GPUs
  drm/nouveau/acr: Abort loading ACR if no firmware was found
  drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13
  drm/amd: Move helper for dynamic speed switch check out of smu13
  drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13
  drm/amd/pm: share the code around SMU13 pcie parameters update
  drm/amdgpu: avoid restore process run into dead loop.
  drm/amd/pm: fix smu i2c data read risk
  drm/nouveau/disp/g94: enable HDMI
  drm/nouveau/disp: fix HDMI on gt215+
  drm/client: Send hotplug event after registering a client
  drm/i915: Fix one wrong caching mode enum usage
  drm/i915: Remove dead code from gen8_pte_encode
  drm/i915/perf: Consider OA buffer boundary when zeroing out reports
  drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
  drm/ttm: never consider pinned BOs for eviction&swap
  drm/fbdev-dma: Fix documented default preferred_bpp value
  dma-buf: fix an error pointer vs NULL bug
  accel/ivpu: Clear specific interrupt status bits on C0
  accel/ivpu: Fix VPU register access in irq disable
  ...
2023-07-14 09:10:28 -07:00
Linus Torvalds
ddbd91617f A fix to prevent a potential buffer overrun in the messenger, marked
for stable.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmSxZc4THGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi2bBB/9y4X7jwmrdPLritmVIZR/m2C3AKRk6
 w4EI5w3zcwisdYhb8DDS5iufLI+M0d7ztVKU7GQMzfgX6Up59DSD+2r4BrDzZWCK
 Y6bggpHNHQ+ALxrpvieBXU/D8FtGGL0M1+uuU84Qkd3sWMFbG8BM5kKhrPHG2thE
 G4OZrubAL9fDBjrsoQI+9w5wZT75OUAh51hoz3HCCJA5KP+tTTekMADL4Hh90Nuj
 rfy8a+97FLayPBnNxNzsu/BKCFflGX5c6cI47PIl96HOXu9QCFoQh6dp/s5FHiYw
 alosIoU4VubUJDIRK6kovUurdaytha7Sj/EyF/epiRmH2DUWr4eU3ULM
 =f7z1
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
 "A fix to prevent a potential buffer overrun in the messenger, marked
  for stable"

* tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client:
  libceph: harden msgr2.1 frame segment length checks
2023-07-14 09:05:15 -07:00
Dan Carpenter
51b56382ed accel/qaic: tighten bounds checking in decode_message()
Copy the bounds checking from encode_message() to decode_message().

This patch addresses the following concerns.  Ensure that there is
enough space for at least one header so that we don't have a negative
size later.

	if (msg_hdr_len < sizeof(*trans_hdr))

Ensure that we have enough space to read the next header from the
msg->data.

	if (msg_len > msg_hdr_len - sizeof(*trans_hdr))
		return -EINVAL;

Check that the trans_hdr->len is not below the minimum size:

	if (hdr_len < sizeof(*trans_hdr))

This minimum check ensures that we don't corrupt memory in
decode_passthrough() when we do.

	memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr));

And finally, use size_add() to prevent an integer overflow:

	if (size_add(msg_len, hdr_len) > msg_hdr_len)

Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q5nbLyDO7kJa+@moroto
2023-07-14 10:03:09 -06:00
Dan Carpenter
ea33cb6fc2 accel/qaic: tighten bounds checking in encode_message()
There are several issues in this code.  The check at the start of the
loop:

	if (user_len >= user_msg->len) {

This check does not ensure that we have enough space for the trans_hdr
(8 bytes).  Instead the check needs to be:

	if (user_len > user_msg->len - sizeof(*trans_hdr)) {

That subtraction is done as an unsigned long we want to avoid
negatives.  Add a lower bound to the start of the function.

	if (user_msg->len < sizeof(*trans_hdr))

There is a second integer underflow which can happen if
trans_hdr->len is zero inside the encode_passthrough() function.

	memcpy(out_trans->data, in_trans->data, in_trans->hdr.len - sizeof(in_trans->hdr));

Instead of adding a check to encode_passthrough() it's better to check
in this central place.  Add that check:

	if (trans_hdr->len < sizeof(trans_hdr)

The final concern is that the "user_len + trans_hdr->len" might have an
integer overflow bug.  Use size_add() to prevent that.

-	if (user_len + trans_hdr->len > user_msg->len) {
+	if (size_add(user_len, trans_hdr->len) > user_msg->len) {

Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9a0cb0c1-a974-4f10-bc8d-94437983639a@moroto.mountain
2023-07-14 10:00:45 -06:00
Michal Wilczynski
5ba30be7fd ACPI: processor: Introduce acpi_processor_osc()
The processor _OSC method is already used for a workaround introduced
in commit a21211672c ("ACPI / processor: Request native thermal
interrupt handling via _OSC"), but in accordance with ACPI 6.5 (and
earlier), it should be used for negotiating all of the processor
capabilities instead of _PDC (which has been deprecated since ACPI 3.0
and got removed from ACPI 6.5 entirely).

Create a new callback function called acpi_processor_osc() to be invoked
for every processor object and processor device in the ACPI namespace, in
analogy with the already existing acpi_hwp_native_thermal_lvt_osc().

Make this function implement the workaround mentioned above and convey
all of the OSPM processor support information to the platform firmware
by setting all of the appropriate processor capabilities bits before
evaluating _OSC for the given processor. For this purpose, make it
call arch_acpi_set_proc_cap_bits() and modify the latter to set
ACPI_PROC_CAP_COLLAB_PROC_PERF along with the other processor
capabilities bits.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject and changelog edits, whitespace fixup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 17:59:40 +02:00
Michal Wilczynski
b9e8d0168a ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()
Currently, ACPI_PROC_CAP_SMP_T_SWCOORD is set in acpi_set_pdc_bits(), but
it is not _PDC-specific. It should be set along with the other processor
capability bits.

Move the setting of ACPI_PROC_CAP_SMP_T_SWCOORD to
arch_acpi_set_proc_cap_bits().

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 17:59:40 +02:00
Michal Wilczynski
4f37ab5e05 ACPI: processor: Clear C_C2C3_FFH and C_C1_FFH in arch_acpi_set_proc_cap_bits()
Currently arch_acpi_set_proc_cap_bits() clears ACPI_PDC_C_C2C3_FFH bit in
case MWAIT instruction is not supported.

It should also clear ACPI_PDC_C_C1_FFH, as when MWAIT is not supported,
C1 is entered by executing the HLT instruction.

Quote from the C_C1_FFH description:

"If set, OSPM is capable of performing native C State instructions (beyond
halt) for the C1 handler in multi-processor configurations". As without
MWAIT there is no native C-state instructions beyond HALT, this bit
should be toggled off."

Clear ACPI_PDC_C_C1_FFH and ACPI_PDC_C_C2C3_FFH in
arch_acpi_set_proc_cap_bits() in case MWAIT is not supported or
overridden.

Remove setting those bits from the processor_pdc.c code.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 17:59:40 +02:00
Michal Wilczynski
c9e6c5e64f ACPI: processor: Rename ACPI_PDC symbols
The prefix in the names of the ACPI_PDC symbols suggests that they are
only relevant for _PDC, but in fact they can also be used in the _OSC.

Change that prefix to a more generic ACPI_PROC_CAP that will better
reflect the purpose of those symbols as they represent bits in a general
processor capabilities buffer.

Rename pdc_intel.h to proc_cap_intel.h to follow the change of the
symbol name prefix.

No intentional functional impact.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 17:59:40 +02:00
Michal Wilczynski
c5e4d05db8 ACPI: processor: Refactor arch_acpi_set_pdc_bits()
The capabilities buffer modified by the arch_acpi_set_pdc_bits() is not
_PDC-specific, as it can be used by _OSC too.

Change the name of that function to better reflect its independence from
_PDC and make it take the capabilities buffer address as the argument
directly, without any offset, as _OSC and _PDC use different capabilities
buffer offsets.

No intentional functional impact.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 17:59:40 +02:00
Michal Wilczynski
3272a4aadc ACPI: processor: Move processor_physically_present() to acpi_processor.c
Since _PDC method is deprecated and a preferred method of communicating
OSPM processor power management capabilities is _OSC, there is a need to
move function checking whether processor is present as this logic is not
_PDC specific.

Move processor_physically_present() to acpi_processor.c.

No intentional functional impact.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 17:59:40 +02:00
Michal Wilczynski
0a0e2ea642 ACPI: processor: Move MWAIT quirk out of acpi_processor.c
Commit 2a2a64714d ("ACPI: Disable MWAIT via DMI on broken Compal board")
introduced a workaround for MWAIT for a specific x86 system.

Move the code outside of acpi_processor.c to acpi/x86/ directory for
consistency and rename the functions associated with it, so their names
start with "acpi_proc_quirk_" to make the goal obvious.

No intentional functional impact.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, two function names changed ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 17:59:40 +02:00
Hans de Goede
f2ae72541d platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed()
Muxed (mem) regions will wait in request_mem_region_muxed() if the region
is busy (in use by another consumer) during the call.

In order to wake-up possibly waiting other consumers of the region,
it must be released by a release_mem_region() call, which will actually
wake up any waiters.

release_mem_region() also frees the resource created by
request_mem_region_muxed(), avoiding the need for the unmatched kfree().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230711095920.264308-1-hdegoede@redhat.com
2023-07-14 17:47:29 +02:00
Cristian Ciocaltea
3526df3faf arm64: defconfig: Enable Rockchip OTP memory driver
The Rockchip one-time programmable memory driver provides access to
various SoC specific information, e.g. leakage currents of the
CPU/GPU/NPU components found on a RK3588 SoC.

Enable the driver as built-in to allow client device drivers (e.g.
cpufreq) to access the required data for proper settings adjustment.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230710190107.32451-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:35:33 +02:00
Sebastian Reichel
1642bf66e2 arm64: dts: rockchip: add USB2 to rk3588s-rock5a
Enable USB2 (EHCI and OCHI mode) support for the Radxa ROCK 5 Model A.
This adds USB support for the on-board WLAN/BT chip, the two USB2
ports, the USB available from the 2x20 connector and the lower USB3
port (in USB2 mode).

The upper USB3 (further away from the PCB) uses the RK3588S USB TypeC
OTG controller for USB2 and USB3 and thus is not supported at all at
the moment.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230712165106.65603-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:33:26 +02:00
Sebastian Reichel
488fc7ad2b arm64: dts: rockchip: add USB2 to rk3588-rock5b
Enable USB2 (EHCI and OCHI mode) support for the Radxa ROCK 5 Model B.
This adds USB support on the M.2 Key E, both USB2 ports and USB2 mode
for the upper USB3 port (the one further away from the PCB).

The lower USB3 (closer to the PCB) and the USB-C ports use the RK3588
USB TypeC host controller, which is not yet supported upstream.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230712165106.65603-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:33:15 +02:00
Sebastian Reichel
e39da1074c arm64: dts: rockchip: add USB2 to rk3588-evb1
Enable USB2 (EHCI and OCHI mode) support for the Rockchip RK3588 EVB1.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230712165106.65603-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:32:45 +02:00
Sebastian Reichel
a684cb4164 arm64: dts: rockchip: add USB2 support for rk3588
This adds USB2 (EHCI & OHCI) ports including the related PHYs
and GRF modules to the rk3588(s) device tree.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230712165106.65603-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:32:45 +02:00
Jagan Teki
ccc1b7ee2e arm64: defconfig: Enable PHY_ROCKCHIP_NANENG_COMBO_PHY
Rockchip RK3588 SoC has NaNeng IP PHY block used for PCIe, USB3, SATA
and SGMII.

Enable Rockchip NaNeng PHY driver.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-4-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:27:11 +02:00
Jagan Teki
9b9fb10b9d arm64: dts: rockchip: Enable RS485 for edgeble-neu6b
Add RS485 support for Edgeble Neu6B NCM IO board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-8-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:26:52 +02:00
Jagan Teki
9ee9ea88e6 arm64: dts: rockchip: Enable RS232 for edgeble-neu6b
Add RS232 support for Edgeble Neu6B NCM IO board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-7-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:26:51 +02:00
Jagan Teki
b65814bfb8 arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b
Add PWM FAN support for Edgeble Neu6B NCM IO board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-6-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:26:51 +02:00
Jagan Teki
8f3aa4f708 arm64: dts: rockchip: Enable RTC for edgeble-neu6b
Add RTC support for Edgeble Neu6B NCM IO board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-5-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:26:51 +02:00
Jagan Teki
89f713b059 arm64: dts: rockchip: Enable SATA for edgeble-neu6b
Add SATA support for Edgeble Neu6B NCM IO board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-3-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:26:50 +02:00
Jagan Teki
61808d9341 arm64: dts: rockchip: Add microSD card for edgeble-neu6b
Add sdmmc support for Edgeble Neu6B NCM IO board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-2-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:26:50 +02:00
Jagan Teki
0d3f385d71 arm64: dts: rockchip: Add PMIC for edgeble-neu6b
This adds PMIC support for the Edgeble Neu6B NCM.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-14 17:26:50 +02:00
Wang Ming
0d5a4f8f77 fs: Fix error checking for d_hash_and_lookup()
The d_hash_and_lookup() function returns error pointers or NULL.
Most incorrect error checks were fixed, but the one in int path_pts()
was forgotten.

Fixes: eedf265aa0 ("devpts: Make each mount of devpts an independent filesystem.")
Signed-off-by: Wang Ming <machel@vivo.com>
Message-Id: <20230713120555.7025-1-machel@vivo.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-07-14 17:01:23 +02:00
Sumit Gupta
20515700cb arm64: tegra: Update CPU OPP tables
Update the CPU OPP table to include all frequencies supported by
Tegra234. Different platforms can choose to keep all or few entries
based on their power and performance tunings.

Signed-off-by: Shao-Chun Kao <shaochunk@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-07-14 16:52:47 +02:00