Commit graph

1,267,977 commits

Author SHA1 Message Date
Konrad Dybcio
7e1f024ef0 arm64: dts: qcom: pm6150l: Add missing short interrupt
Add the missing short interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['ovp'] is too short

Fixes: fe508ced49 ("arm64: dts: qcom: pm6150l: Add wled node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-3-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:42:32 -07:00
Krzysztof Kozlowski
6b0fd355e9 arm64: dts: qcom: sdm850-c630: add missing panel supply
Panel bindings (boe,nv133fhm-n61) require supply which here actually can
be turned on/off via GPIO control:

  sdm850-lenovo-yoga-c630.dtb: panel: 'power-supply' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230617171512.286795-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:36:29 -07:00
Stephan Gerhold
3f30509ff5 ARM: dts: qcom: apq8064: Drop redundant /smd node
The "smd-edge"s for remote processors are typically specified below the
remoteproc nodes. For some reason apq8064 also has them all listed in a
top-level /smd node, disabled by default. None of the boards enable them.

Right now apq8064 only has support for WCNSS/riva, but there the
smd-edge is already defined with the same interrupt etc below the
riva-pil node.

Drop these redundant definitions since the /smd top-level node is now
deprecated.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-13-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:25:50 -07:00
Stephan Gerhold
b471a1bc79 ARM: dts: qcom: Add rpm-proc node for SMD platforms
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).

This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-12-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:25:21 -07:00
Stephan Gerhold
7e1acc8b92 arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms
Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).

This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.

Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:23:36 -07:00
Stephan Gerhold
091efd5633 arm64: dts: qcom: Add rpm-proc node for SMD platforms
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).

This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-10-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:19:09 -07:00
Stephan Gerhold
8ddfa81d09 soc: qcom: Add RPM processor/subsystem driver
Add a simple driver for the qcom,rpm-proc compatible that registers the
"smd-edge" and populates other children defined in the device tree.

Note that the DT schema belongs to the remoteproc subsystem while this
driver is added inside soc/qcom. I argue that the RPM *is* a remoteproc,
but as an implementation detail in Linux it can currently not benefit
from anything provided by the remoteproc subsystem. The RPM firmware is
usually already loaded and started by earlier components in the boot
chain and is not meant to be ever restarted.

To avoid breaking existing kernel configurations the driver is always
built when smd-rpm.c is also built. They belong closely together anyway.
To avoid build errors CONFIG_RPMSG_QCOM_SMD must be also built-in if
rpm-proc is.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-9-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:57 -07:00
Stephan Gerhold
181563be43 rpmsg: qcom_smd: Use qcom_smem_is_available()
Rather than looking up a dummy item from SMEM, use the new
qcom_smem_is_available() function to make the code more clear
(and reduce the overhead slightly).

Add the same check to qcom_smd_register_edge() as well to ensure that
it only succeeds if SMEM is already available - if a driver calls the
function and SMEM is not available yet then the initial state will be
read incorrectly and the RPMSG devices might never become available.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-8-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:56 -07:00
Stephan Gerhold
4dbb9e2322 soc: qcom: smem: Add qcom_smem_is_available()
Avoid having to look up a dummy item from SMEM to detect if it is
already available or if we need to defer probing.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-7-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:56 -07:00
Stephan Gerhold
9a2c674ee7 dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem
On Qualcomm platforms, most subsystems (e.g. audio/modem DSP) are
described as remote processors in the device tree, with a dedicated
node where properties and services related to them can be described.

The Resource Power Manager (RPM) is also such a subsystem, with a
remote processor that is running a special firmware. Unfortunately,
the RPM never got a dedicated node representing it properly in the
device tree. Most of the RPM services are described below a top-level
/smd or /rpm-glink node.

However, SMD/GLINK is just one of the communication channels to the RPM
firmware. For example, the MPM interrupt functionality provided by the
RPM does not use SMD/GLINK but writes directly to a special memory
region allocated by the RPM firmware in combination with a mailbox.
Currently there is no good place in the device tree to describe this
functionality. It doesn't belong below SMD/GLINK but it's not an
independent top-level device either.

Introduce a new "qcom,rpm-proc" compatible that allows describing the
RPM as a remote processor/subsystem like all others. The SMD/GLINK node
is moved to a "smd-edge"/"glink-edge" subnode consistent with other
existing bindings. Additional subnodes (e.g. interrupt-controller for
MPM, rpm-master-stats) can be also added there.

Deprecate using the old top-level /smd node since all SMD edges
are now specified as subnodes of the remote processor.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-6-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:56 -07:00
Stephan Gerhold
b3a12c2996 dt-bindings: remoteproc: glink-rpm-edge: Use "glink-edge" as node name
Semantically glink-edge and glink-rpm-edge are similar: Both describe
the communication channels to a remote processor. The RPM glink-edge is
a special case that needs slightly different properties but otherwise
it is used exactly the same.

To improve consistency use the same "glink-edge" node name also for
glink-rpm-edge. Drop the $nodename from qcom,glink-edge.yaml to avoid
matching the wrong schema. qcom,glink-edge.yaml is always referenced
explicitly from other schemas. This will already ensure that the nodes
are being checked, so it's not necessary to bind to all nodes named
"glink-edge".

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-5-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:56 -07:00
Stephan Gerhold
bcabe1e091 soc: qcom: smd-rpm: Match rpmsg channel instead of compatible
There is an ever growing list of compatibles in the smd-rpm.c driver.
A fallback compatible would help here but would still require keeping
the current list around for backwards compatibility.

As an alternative, let's switch the driver to match the rpmsg_device_id
instead, which is always "rpm_requests" on all platforms. Add a check
to ensure that there is a device tree node defined for the device since
otherwise the of_platform_populate() call will operate on the root node (/).

Similar approaches with matching rpmsg_device_id are already used in
qcom_sysmon, qcom_glink_ssr, qrtr, and rpmsg_wwan_ctrl.

Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375 (G-Link)
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-4-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:56 -07:00
Stephan Gerhold
029bf29419 dt-bindings: soc: qcom: smd-rpm: Add some more compatibles
To avoid several more small patches adding new RPM compatibles in the
future, add MDM9607, MSM8610, MSM8917, MSM8937 and MSM8952 at once.
All of these have been worked on over the time by some people and are
definitely compatible as-is with the smd-rpm driver.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-3-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:56 -07:00
Stephan Gerhold
7b583c490a dt-bindings: soc: qcom: smd-rpm: Add MSM8909 to qcom,smd-channels
MSM8909 is using qcom,smd-channels but is missing in the list, add it
there as well.

Fixes: 709d473dd5 ("dt-bindings: soc: qcom: smd-rpm: Add MSM8909")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-2-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:56 -07:00
Stephan Gerhold
fe604ee3e0 dt-bindings soc: qcom: smd-rpm: Fix sort order
Some of the enum entries are not properly ordered, fix that.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-1-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 22:18:56 -07:00
Praveenkumar I
752f585805 arm64: dts: qcom: ipq9574: Add cpu cooling maps
Add cpu cooling maps for passive trip points. The cpu cooling
device states are mapped to cpufreq based scaling frequencies.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Link: https://lore.kernel.org/r/20230713083101.971525-2-quic_ipkumar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 21:36:42 -07:00
Dmitry Baryshkov
4e125191e6 arm64: dts: qcom: sm8450: provide MDSS cfg interconnect
Add support for the MDSS cfg-cpu bus vote on the SM8450 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230712121145.1994830-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 21:30:12 -07:00
Dmitry Baryshkov
a9037f330e ARM: dts: qcom: apq8074-dragonboard: add resin
Add device nodes for resin (reset, volume-down) device node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230609022553.1775844-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 21:04:50 -07:00
Dmitry Baryshkov
de57328b1c ARM: dts: qcom-pm8941: add resin support
Wrap existing pwrkey and new resin nodes into the new pon node to enable
volume-down key support on platforms using pm8941 PMIC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230609022553.1775844-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 21:04:28 -07:00
Jakub Kicinski
def3833fc6 Merge branch 'net-stmmac-replace-boolean-fields-in-plat_stmmacenet_data-with-flags'
Bartosz Golaszewski says:

====================
net: stmmac: replace boolean fields in plat_stmmacenet_data with flags

As suggested by Jose Abreu: let's drop all 12 boolean fields in
plat_stmmacenet_data and replace them with a common bitfield.
====================

Link: https://lore.kernel.org/r/20230710090001.303225-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:55 -07:00
Bartosz Golaszewski
9d0c0d5ebd net: stmmac: replace the en_tx_lpi_clockgating field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-13-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
743dd1db85 net: stmmac: replace the rx_clk_runs_in_lpi field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-12-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
621ba7ad78 net: stmmac: replace the int_snapshot_en field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-11-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
aa5513f5d9 net: stmmac: replace the ext_snapshot_en field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-10-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
956c3f09b9 net: stmmac: replace the multi_msi_en field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-9-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
fc02152bdb net: stmmac: replace the vlan_fail_q_en field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-8-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
efe92571bf net: stmmac: replace the serdes_up_after_phy_linkup field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-7-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
68861a3bcc net: stmmac: replace the tso_en field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-6-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
d8daff284e net: stmmac: replace the has_sun8i field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-5-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
fd1d62d80e net: stmmac: replace the use_phy_wol field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-4-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
309efe6eb4 net: stmmac: replace the sph_disable field with a flag
Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-3-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:14 -07:00
Bartosz Golaszewski
d26979f1ce net: stmmac: replace the has_integrated_pcs field with a flag
struct plat_stmmacenet_data contains several boolean fields that could be
easily replaced with a common integer 'flags' bitfield and bit defines.

Start the process with the has_integrated_pcs field.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-2-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:57:13 -07:00
Krzysztof Kozlowski
b8fbeea025 arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeup again
gpio-keys,wakeup is a deprecated property:

  m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)

Fixes: a422c6a91a ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711063011.16222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 20:40:46 -07:00
Konrad Dybcio
b4fe47d12f arm64: dts: qcom: qrb2210-rb1: Add regulators
Add and assign RPM regulators coming from PM2250.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-rb1_regulator-v1-1-bc4398c35800@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 20:40:03 -07:00
Naveen Kumar Goud Arepalli
e608d16e01 arm64: dts: qcom: sa8775p-ride: Update L4C parameters
L4c is the supply for UFS vccq, As per UFS spec range of vccq is
1.14V to 1.26V, There are stability issues when operating at
marginal voltage. Hence configure the min and max vccq voltages
to 1.2V.

Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711105915.30581-1-quic_narepall@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 20:39:21 -07:00
Konrad Dybcio
5e6d88815c arm64: dts: qcom: sc7180: Bring back cpufreq-based DDR votes
ChromeOS folks reported that bwmon is too slow and getting rid of
statically defined CPUFREQ-based votes (effectively floor votes because of
how opp-peak-kBps is interpreted), has a major performance impact in some
common applications. Bring them back until MEMLAT support is introduced.

This is a partial revert of the commit referenced in the fixes tag.

Fixes: adc16b84e1 ("arm64: dts: qcom: sc7180: Hook up BWMONs")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-7180ddr-v1-1-56e4f13afe9b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 20:38:08 -07:00
Alan Stern
5e1627cb43 net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urb
The syzbot fuzzer identified a problem in the usbnet driver:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc9000463f568 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001
RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003
R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500
FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0
Call Trace:
 <TASK>
 usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453
 __netdev_start_xmit include/linux/netdevice.h:4918 [inline]
 netdev_start_xmit include/linux/netdevice.h:4932 [inline]
 xmit_one net/core/dev.c:3578 [inline]
 dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594
...

This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.

The fix is simply to add such a check.

Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:37:23 -07:00
Konrad Dybcio
1df6b32e38 arm64: dts: qcom: sm6350: Add BWMONs
Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm6350.

There are 3 more NPU BWMONs, but these are skipped for now.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-4-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 20:36:30 -07:00
Konrad Dybcio
2a2bd124d4 arm64: dts: qcom: sm8250: Add BWMONs
Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm8250.

LPDDR4X levels are skipped, as LPDDR5 seems more popular with SM8250 and
voting for inexistent levels doesn't uptick the bus frequency, which
results in no increased bandwidth, which results in bwmon deciding we
shouldn't go higher.. you see the point!

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-3-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 20:36:30 -07:00
Ziyang Chen
bec9ce3407 nfp: prevent dropped counter increment during probe
The dev_rx_discards counter will increment by one when an interface is
toggled up and down. The main reason is that the driver first sends a
`NFP_NET_CFG_CTRL_ENABLE` configuration packet to the NIC to perform port
initialisation when an interface is set up. But there is a race between
physical link up and free list queue initialization which may lead to the
configuration packet being discarded.

To address this problem a new bit NFP_NET_CFG_CTRL_FREELIST_EN is added to
perform free list initialisation on the NIC. The FREELIST_EN should be sent
in advance to initialize free list queue. When a port is set to down,
FREELIST_EN should be sent after CTRL_ENABLE to avoid packet discards.

Signed-off-by: Ziyang Chen <ziyang.chen@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20230712123551.13858-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:36:10 -07:00
Jakub Kicinski
6f13b49b57 Merge branch 'selftests-mptcp-join-pass-args-in-new-env-vars'
Matthieu Baerts says:

====================
selftests: mptcp: join: pass args in new env vars

In this series, Geliang did some refactoring in the mptcp_join.sh file.

Patch 1 reduces the scope of some global env vars, only used by some
tests: easier to deal with.

Patch 2 uses a dedicated env var for fastclose case instead of re-using
addr_nr_ns2 with embedded info, clearer.

Patch 3 is similar but for the fullmesh case.

Patch 4 moves a positional but optional argument of run_tests() to an
env var like it has already been done with the other args, cleaner.
====================

Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-0-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:34:54 -07:00
Geliang Tang
e571fb09c8 selftests: mptcp: add speed env var
Use a new env var speed instead of using 'speed' argument of run_tests()
and do_transfer(). It can be set with 'fast', 'slow', or the actual speed
number:

  run_tests $ns1 $ns2 10.0.1.1 slow

  ->

  speed=slow \
          run_tests $ns1 $ns2 10.0.1.1.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-4-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:34:51 -07:00
Geliang Tang
4aadde088a selftests: mptcp: add fullmesh env var
Use a new env var fullmesh instead of passing 'fullmesh_*' to addr_nr_ns2.
It can be set with the actual value of addr_nr_ns2 now:

  addr_nr_ns2=fullmesh_1 \
          run_tests $ns1 $ns2 10.0.1.1

  ->

  fullmesh=1 \
          run_tests $ns1 $ns2 10.0.1.1.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-3-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:34:51 -07:00
Geliang Tang
080b7f5733 selftests: mptcp: add fastclose env var
Use a new env var fastclose instead of passing fastclose to addr_nr_ns2.
It can be set with 'server' or 'client':

  addr_nr_ns2=fastclose_client \
          run_tests $ns1 $ns2 10.0.1.1

  ->

  fastclose=client \
          run_tests $ns1 $ns2 10.0.1.1.

With this change, the fullmesh flag setting code can be moved into
pm_nl_set_endpoint() from do_transfer().

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-2-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:34:51 -07:00
Geliang Tang
662aa22d7d selftests: mptcp: set all env vars as local ones
It would be better to move the declaration of all the env variables to
do_transfer(), run_tests(), or pm_nl_set_endpoint() as local variables,
instead of exporting them globally at the beginning of the file.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-1-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:34:50 -07:00
Linus Walleij
95ce158b6c dsa: mv88e6xxx: Do a final check before timing out
I get sporadic timeouts from the driver when using the
MV88E6352. Reading the status again after the loop fixes the
problem: the operation is successful but goes undetected.

Some added prints show things like this:

[   58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
    for switch, addr 1b reg 0b, mask 8000, val 0000, data c000
[   58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for
    ATU op 4000, fid 0001
(...)
[   61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
    for switch, addr 1c reg 18, mask 8000, val 0000, data 9860
[   61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting
    for PHY command 1860 to complete

The reason is probably not the commands: I think those are
mostly fine with the 50+50ms timeout, but the problem
appears when OpenWrt brings up several interfaces in
parallel on a system with 7 populated ports: if one of
them take more than 50 ms and waits one or more of the
others can get stuck on the mutex for the switch and then
this can easily multiply.

As we sleep and wait, the function loop needs a final
check after exiting the loop if we were successful.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Fixes: 35da1dfd94 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 20:31:11 -07:00
Christophe JAILLET
cbdd13bfea soc: qcom: smem: Use struct_size()
Use struct_size() instead of hand-writing it, when allocating a structure
with a flex array.

This is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/f74328551cfab0262ba353f37d047ac74bf616e1.1689194490.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13 20:21:26 -07:00
Dave Airlie
38d88d5e97 amd-drm-fixes-6.5-2023-07-12:
amdgpu:
 - SMU i2c locking fix
 - Fix a possible deadlock in process restoration for ROCm apps
 - Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZK7yYQAKCRC93/aFa7yZ
 2JvYAQDpMj8/rLUsmWRk30jvkaZivgaeUEAG0FGaMpKaaATbvwEA2eHxN3xk5GKs
 ethEPp/zdivIrz6h/JWSCFrpCzqg4g8=
 =rsRJ
 -----END PGP SIGNATURE-----

Merge tag 'amd-drm-fixes-6.5-2023-07-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.5-2023-07-12:

amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com
2023-07-14 13:19:54 +10:00
Jakub Kicinski
d2afa89f66 for-netdev
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmSwqwoACgkQ6rmadz2v
 bTqOHRAAn+fzTLqUqsveFQcxOkie5MPHxKoOTjG4+yFR7rzPkU6Mn5RX3w5yFzSn
 RqutwykF9OgipAzC3QXv4pRJuq6Gia5nvwUSDP4CX273ljyeF54DK7HfopE1+YrK
 HXyBWZvVvMZP6q7qQyQ3qtbHZSjs5XP/M6YBlJ5zo/BTLFCyvbSDP14YKEqcBkWG
 ld72ElXFxlnr/zEfRjzBCfMlbmgeHLO0SiHS/9827zEmNP1AAH5/ETA7/rJ7yCJs
 QNQUIoJWob8xm5FMJ6CU/+sOqXR1CY053meGJFFBX5pvVD/CLRhrwHn0IMCyQqmh
 wKR5waeXhpl/CKNeFuxXVMNFiXbqBb/0LYJaJtrMysjMLTsQ9X7NkrDBa/+kYGyZ
 +ghGlaMQvPqUGg0rLH2nl9JNB8Ne/8prLMsAKUWnPuOo+Q03j054gnqhGeNtDd5b
 gpSk+7x93PlhGcegBV1Wk8dkiGC5V9nTVNxg40XQUCs4k9L/8Vjc35Tjqx7nBTNH
 DiFD24DDKUZacw9L6nEqvLF/N2fiRjtUZnVPC0yn/annyBcfX1s+ZH2Tu1F6Qk38
 QMfBCnt12exmsiDoxdzzGJtjHnS/k5fsaKjlR21mOyMrIH7ipltr5UHHrdr1hBP6
 24uSeTImvQQKDi+9IuXN127jZDOupKqVS6csrA0ZXrlKWh2HR+U=
 =GVUB
 -----END PGP SIGNATURE-----

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2023-07-13

We've added 67 non-merge commits during the last 15 day(s) which contain
a total of 106 files changed, 4444 insertions(+), 619 deletions(-).

The main changes are:

1) Fix bpftool build in presence of stale vmlinux.h,
   from Alexander Lobakin.

2) Introduce bpf_me_mcache_free_rcu() and fix OOM under stress,
   from Alexei Starovoitov.

3) Teach verifier actual bounds of bpf_get_smp_processor_id()
   and fix perf+libbpf issue related to custom section handling,
   from Andrii Nakryiko.

4) Introduce bpf map element count, from Anton Protopopov.

5) Check skb ownership against full socket, from Kui-Feng Lee.

6) Support for up to 12 arguments in BPF trampoline, from Menglong Dong.

7) Export rcu_request_urgent_qs_task, from Paul E. McKenney.

8) Fix BTF walking of unions, from Yafang Shao.

9) Extend link_info for kprobe_multi and perf_event links,
   from Yafang Shao.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (67 commits)
  selftests/bpf: Add selftest for PTR_UNTRUSTED
  bpf: Fix an error in verifying a field in a union
  selftests/bpf: Add selftests for nested_trust
  bpf: Fix an error around PTR_UNTRUSTED
  selftests/bpf: add testcase for TRACING with 6+ arguments
  bpf, x86: allow function arguments up to 12 for TRACING
  bpf, x86: save/restore regs with BPF_DW size
  bpftool: Use "fallthrough;" keyword instead of comments
  bpf: Add object leak check.
  bpf: Convert bpf_cpumask to bpf_mem_cache_free_rcu.
  bpf: Introduce bpf_mem_free_rcu() similar to kfree_rcu().
  selftests/bpf: Improve test coverage of bpf_mem_alloc.
  rcu: Export rcu_request_urgent_qs_task()
  bpf: Allow reuse from waiting_for_gp_ttrace list.
  bpf: Add a hint to allocated objects.
  bpf: Change bpf_mem_cache draining process.
  bpf: Further refactor alloc_bulk().
  bpf: Factor out inc/dec of active flag into helpers.
  bpf: Refactor alloc_bulk().
  bpf: Let free_all() return the number of freed elements.
  ...
====================

Link: https://lore.kernel.org/r/20230714020910.80794-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13 19:13:24 -07:00
Dave Airlie
864e029fea Merge tag 'drm-intel-fixes-2023-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Don't preserve dpll_hw_state for slave crtc in Bigjoiner (Stanislav Lisovskiy)
- Consider OA buffer boundary when zeroing out reports [perf] (Umesh Nerlige Ramappa)
- Remove dead code from gen8_pte_encode (Tvrtko Ursulin)
- Fix one wrong caching mode enum usage (Tvrtko Ursulin)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK+nHLCltaxoxVw/@tursulin-desk
2023-07-14 11:13:15 +10:00