Commit graph

1,267,977 commits

Author SHA1 Message Date
Théo Lebrun
75d270fda6 gpio: nomadik: request dynamic ID allocation
Move away from statically allocated GPIO IDs. Switch to dynamic ID
allocation. Static IDs are deprecated because they cause issues when
multiple GPIO controllers are to be found on the same platform.

Add a bit of complexity to do pin number -> GPIO chip + offset.
Previously, bank number and offsets were retrieved using division and
remainder (bank size being constant 32). Now, to get the pin number
matching a bank base, we must know the sum of ngpios of previous banks.
This is done in find_nmk_gpio_from_pin() which also exposes the offset
inside the bank.

Also remove the assumption that bank sizes are constant. Instead of
using NMK_GPIO_PER_CHIP as bank size, use nmk_gpio_chips[i]->ngpio.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-19-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:32:39 +01:00
Théo Lebrun
2f8875ddd1 gpio: nomadik: use devres version of clk_get*()
Replace call to clk_get() by call to devm_clk_get(). Allow automatic
cleanup of the clock in case of probe error.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-18-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:31:27 +01:00
Théo Lebrun
12410e9590 gpio: nomadik: use devm_platform_ioremap_resource() helper
Replace calls to platform_get_resource() then devm_ioremap_resource() by
a single call to devm_platform_ioremap_resource().

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-17-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:30:53 +01:00
Théo Lebrun
be0552e1f4 gpio: nomadik: replace of_property_read_*() by device_property_read_*()
Avoid OF APIs in the GPIO subsystem. Here, replace
of_property_read_{u32,bool}() call by device_property_read_{u32,bool}().

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-16-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:30:15 +01:00
Théo Lebrun
0b95fcd1f4 gpio: nomadik: replace of_find_*() by bus_find_device_by_of_node()
Avoid OF APIs in the GPIO subsystem. Here, replace
of_find_device_by_node() call by bus_find_device_by_of_node().

The new helper returns a struct device pointer. Store it in a new local
variable and use it down the road.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-15-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:29:36 +01:00
Théo Lebrun
9b82653dee gpio: nomadik: add #include <linux/slab.h>
Add linux/slab.h header include for GFP flags.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-14-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:28:59 +01:00
Hugues Fruchet
a7b9ab6c88 arm64: dts: st: add video encoder support to stm32mp255
Add VENC hardware video encoder support to STM32MP255.

Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 10:28:54 +01:00
Hugues Fruchet
ff7759269c arm64: dts: st: add video decoder support to stm32mp255
Add VDEC hardware video decoder support to STM32MP255.

Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 10:28:54 +01:00
Théo Lebrun
cbb24db148 pinctrl: nomadik: follow conditional kernel coding conventions
Fix strict checkpatch warnings relative to if-else blocks and bool
expressions. Message types addressed:

   CHECK: Comparison to NULL could be written "!nmk_cfg_params[index].choice"
   CHECK: Unbalanced braces around else statement
   CHECK: Using comparison to false is error prone
   CHECK: Using comparison to true is error prone
   CHECK: braces {} should be used on all arms of this statement

Before: 0 errors, 1 warnings, 16 checks.
After:  0 errors, 1 warnings,  7 checks.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-13-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:28:21 +01:00
Théo Lebrun
8e48230d6d pinctrl: nomadik: follow whitespace kernel coding conventions
Fix strict checkpatch warnings relative to whitespace. Message types
addressed:

   ERROR: space required before the open parenthesis '('
   WARNING: quoted string split across lines
   CHECK: Alignment should match open parenthesis
   CHECK: Please don't use multiple blank lines
   CHECK: line length of 103 exceeds 100 columns
   CHECK: spaces preferred around that '+' (ctx:VxV)

Before: 1 errors, 2 warnings, 38 checks.
After:  0 errors, 1 warnings, 16 checks.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-12-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:27:39 +01:00
Théo Lebrun
1a656a80ea pinctrl: nomadik: follow type-system kernel coding conventions
Fix strict checkpatch warnings relative to types. Warning types
addressed:

   WARNING: do not add new typedefs
   WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
   WARNING: static const char * array should probably be static const
            char * const

Total messages before: 1 errors, 40 warnings, 39 checks.
Total messages after:  1 errors,  2 warnings, 38 checks.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-11-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:27:02 +01:00
Théo Lebrun
dfeaf5e7f3 pinctrl: nomadik: minimise indentation in probe
nmk_pinctrl_probe() iterates over each GPIO block. Use an early
conditional continue to skip to the next iteration rather than indent
all the loop code block.

Do not change code logic. The block is changed from:

	for (i = 0; i < NMK_MAX_BANKS; i++) {
		x = of_parse_phandle(...);
		if (x) {
			... do work ...
		}
	}

To:

	for (i = 0; i < NMK_MAX_BANKS; i++) {
		x = of_parse_phandle(...);
		if (!x)
			continue;

		... do work ...
	}

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-10-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:26:09 +01:00
Théo Lebrun
af76822683 pinctrl: nomadik: fix build warning (-Wpointer-to-int-cast)
Fix compiler warning found in the pinctrl-nomadik platform driver. GCC
message is as such:

drivers/pinctrl/nomadik/pinctrl-nomadik.c:1169:12: warning: cast from
pointer to integer of different size [-Wpointer-to-int-cast]

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-9-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:25:31 +01:00
Théo Lebrun
8a10b1a36d pinctrl: nomadik: fix build warning (-Wformat)
Fix compiler warning found in the pinctrl-nomadik platform driver. GCC
message is as such:

drivers/pinctrl/nomadik/pinctrl-nomadik.c:855:21: warning:
format ‘%u’ expects argument of type ‘unsigned int’, but argument 5
has type ‘size_t {aka const long unsigned int}’ [-Wformat=]

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-8-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:24:51 +01:00
Théo Lebrun
ae82f5d2b1 pinctrl: nomadik: Kconfig: allow building with COMPILE_TEST
PINCTRL_NOMADIK, PINCTRL_STN8815 and PINCTRL_DB8500 depend on ARCH_U8500
or ARCH_NOMADIK. Add COMPILE_TEST as an option to allow test building
the driver.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-7-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:24:16 +01:00
Théo Lebrun
966942ae49 gpio: nomadik: extract GPIO platform driver from drivers/pinctrl/nomadik/
Previously, drivers/pinctrl/nomadik/pinctrl-nomadik.c registered two
platform drivers: pinctrl & GPIO. Move the GPIO aspect to the
drivers/gpio/ folder, as would be expected.

Both drivers are intertwined for a reason; pinctrl requires access to
GPIO registers for pinmuxing, pull-disable, disabling interrupts while
setting the muxing and wakeup control. Information sharing is done
through a shared array containing GPIO chips and a few helper
functions. That shared array is not touched from gpio-nomadik when
CONFIG_PINCTRL_NOMADIK is not defined.

Make no change to the code that moved into gpio-nomadik; there should be
no behavior change following. A few functions are shared and header
comments are added. Checkpatch warnings are addressed. NUM_BANKS is
renamed to NMK_MAX_BANKS.

It is supported to compile gpio-nomadik without pinctrl-nomadik. The
opposite is not true.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-6-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:22:33 +01:00
Théo Lebrun
53cf6b72e0 gpio: nomadik: fix offset bug in nmk_pmx_set()
Previously, the statement looked like:

    slpm[x] &= ~BIT(g->grp.pins[i]);

Where:
 - slpm is a unsigned int pointer;
 - g->grp.pins[i] is a pin number. It can grow to more than 32.

The expected shift amount is a pin bank offset.

This bug does not occur on every group or pin: the altsetting must be
NMK_GPIO_ALT_C and the pin must be 32 or above. It might have occured.
For example, in pinctrl-nomadik-db8500.c, pin group i2c3_c_2 has the
right altsetting and pins 229 and 230.

Fixes: dbfe8ca259 ("pinctrl/nomadik: implement pin multiplexing")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-5-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:20:23 +01:00
Théo Lebrun
6abd174c9c dt-bindings: gpio: nomadik: add optional reset property
Add optional reset device-tree property to the Nomadik GPIO controller.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-4-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:19:39 +01:00
Théo Lebrun
fa55bcecf2 dt-bindings: gpio: nomadik: add mobileye,eyeq5-gpio compatible
This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its
compatible to the dt-bindings. One difference is that the block as
integrated on EyeQ5 does not support sleep-mode.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-3-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:18:44 +01:00
Théo Lebrun
a610f54485 dt-bindings: gpio: nomadik: add optional ngpios property
This GPIO controller can support a lesser number of GPIOs than 32.
Express that in devicetree using an optional, generic property.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-2-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:16:49 +01:00
Paolo Abeni
be9bd8d4e5 Merge branch 'net-dsa-mv88e6xxx-add-amethyst-specific-smi-gpio-function'
Robert Marko says:

====================
net: dsa: mv88e6xxx: add Amethyst specific SMI GPIO function

Amethyst family (MV88E6191X/6193X/6393X) has a simplified SMI GPIO setting
via the Scratch and Misc register so it requires family specific function.

In the v1 review, Andrew pointed out that it would make sense to rename the
existing mv88e6xxx_g2_scratch_gpio_set_smi as it only works on the MV6390
family.

Changes in v2:
* Add rename of mv88e6xxx_g2_scratch_gpio_set_smi to
mv88e6390_g2_scratch_gpio_set_smi
====================

Link: https://lore.kernel.org/r/20240227175457.2766628-1-robimarko@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-29 10:16:42 +01:00
Robert Marko
e3ab3267a0 net: dsa: mv88e6xxx: add Amethyst specific SMI GPIO function
The existing mv88e6390_g2_scratch_gpio_set_smi() cannot be used on the
88E6393X as it requires certain P0_MODE, it also checks the CPU mode
as it impacts the bit setting value.

This is all irrelevant for Amethyst (MV88E6191X/6193X/6393X) as only
the default value of the SMI_PHY Config bit is set to CPU_MGD bootstrap
pin value but it can be changed without restrictions so that GPIO pins
9 and 10 are used as SMI pins.

So, introduce Amethyst specific function and call that if the Amethyst
family wants to setup the external PHY.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-29 10:16:39 +01:00
Robert Marko
5c5b0c444b net: dsa: mv88e6xxx: rename mv88e6xxx_g2_scratch_gpio_set_smi
The name mv88e6xxx_g2_scratch_gpio_set_smi is a bit ambiguous as it appears
to only be applicable to the 6390 family, so lets rename it to
mv88e6390_g2_scratch_gpio_set_smi to make it more obvious.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-29 10:16:39 +01:00
Théo Lebrun
62361b3831 dt-bindings: gpio: nomadik: convert into yaml format
Create gpio/st,nomadik-gpio.yaml json-schema dt-bindings file as a
direct translation from gpio-nmk.txt. Remove the txt file.

Add clocks and gpio-ranges properties which were missing and are being
used in Nomadik devicetrees.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-1-3ba757474006@bootlin.com
[Dropped an unused label]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:15:03 +01:00
Thomas Bourgoin
45734a13fa ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
Add the crypto accelerator enable on stm32mp135f-dk board.

Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 10:14:08 +01:00
Lionel Debieve
d4e12273a7 ARM: dts: stm32: enable CRC on stm32mp135f-dk
Enable Cyclic redundancy check on stm32mp135f-dk.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 10:14:07 +01:00
Lionel Debieve
b40a53f062 ARM: dts: stm32: add CRC on stm32mp131
The Cyclic redundancy check calculation unit (CRC) peripheral
offers a CRC-based operation (CRC32/CRC32C) used to verify data
transmission or storage integrity.
This peripheral is integrated in stm32mp131 and can be default
enabled.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 10:14:07 +01:00
Théo Lebrun
2805464831 dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings
Add dt-schema type bindings for the Mobileye EyeQ5 pin controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240227-mbly-clk-v8-1-c57fbda7664a@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-02-29 10:09:06 +01:00
Dario Binacchi
db4fc2c79c ARM: dts: add stm32f769-disco-mb1166-reva09
As reported in the section 8.3 (i. e. Board revision history) of document
UM2033 (i. e. Discovery kit with STM32F769NI MCU) these are the changes
related to the board revision addressed by the patch:
- Board MB1166 revision A-09:
  - LCD FRIDA FRD397B25009-D-CTK replaced by FRIDA FRD400B25025-A-CTK

The patch adds the DTS support for the new display which belongs to the
the Novatek NT35510-based panel family.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 09:50:09 +01:00
Dario Binacchi
598e5adfeb ARM: dts: stm32: add display support on stm32f769-disco
The patch adds display support on the stm32f769-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 09:50:09 +01:00
Dario Binacchi
f1317928fa ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
In the schematics of document UM2033, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.

This patch is preparatory for future developments.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 09:50:09 +01:00
Dario Binacchi
a995fd2e8b ARM: dts: stm32: add DSI support on stm32f769
Add support for MIPI DSI Host controller. Since MIPI DSI is not
available on stm32f746, the patch adds the "stm32f769.dtsi" file
containing the dsi node inside.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 09:50:09 +01:00
Dario Binacchi
55e963738a dt-bindings: mfd: stm32f7: Add binding definition for DSI
Add binding definition for MIPI DSI Host controller.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 09:50:09 +01:00
Dario Binacchi
40aed1c018 dt-bindings: nt35510: document 'port' property
Allow 'port' property (coming from panel-common.yaml) to be used in DTS:

  st/stm32f769-disco-mb1166-reva09.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29 09:50:09 +01:00
Richard Acayan
bf0390e2c9 drm/panel: add samsung s6e3fa7 panel driver
The S6E3FA7 display controller is enabled in every Pixel 3a (non-XL)
variant. Add the driver for it, generated by
linux-mdss-dsi-panel-driver-generator.

There are other panels connected to the same S6E3FA7 display controller,
such as the AMS604NL01 panel, which are incompatible with this driver.
Name the device tree compatible after the panel model according to
iFixit.

Link: https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
Link: https://android.googlesource.com/kernel/msm/+/7fda1cd7b64710dafac5f34899611c6d35eb4cd2/arch/arm64/boot/dts/google/dsi-panel-s6e3fa7-1080p-cmd.dtsi
Link: https://github.com/msm8953-mainline/linux/blob/v6.6.12-r0/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
Link: https://www.ifixit.com/Guide/Image/meta/muyjtLQTHu6MDkhK
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240209001639.387374-8-mailingradian@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-02-29 09:48:57 +01:00
Richard Acayan
2689b33b88 dt-bindings: display: panel-simple-dsi: add s6e3fa7 ams559nk06 compat
The Samsung S6E3FA7 display controller and AMS559NK06 panel are used for
the display in Pixel 3a devices. Add the compatible for it.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240209001639.387374-7-mailingradian@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209001639.387374-7-mailingradian@gmail.com
2024-02-29 09:47:48 +01:00
Maarten Lankhorst
7e10d87e63 drm/xe: Add uapi for dumpable bos
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this
mapping should be dumped.

This is not hooked up, but the uapi should be ready before merging.

It's likely easier to dump the contents of the bo's at devcoredump
readout time, so it's better if the bos will stay unmodified after
a hang. The NEEDS_CPU_MAPPING flag is removed as requirement.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-3-maarten.lankhorst@linux.intel.com
(cherry picked from commit 76a86b58d2)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-02-29 09:35:46 +01:00
Takashi Iwai
17c6a0c986 ASoC: Fixes for v6.8
A few small fixes, some driver specific and one slightly larger one
 from Richard which adds a new core helper and updates a small clutch of
 drivers to deal with the fact that they were using a helper which
 requires that the lock for the list of controls without holding that
 lock.  We also have some quirks for new AMD based Lenovo systems.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXfbaEACgkQJNaLcl1U
 h9BebQf/aFqaqCH76TIyVpJgzFKb4Gxt5cZGtnQTFFGvwr20qLdDpcu0KddepiMF
 eRYIzGu0F7KsLOKhUFy06qoti7b3QMyJtRmCIjBt9+RAt8QgmZGG9jSYqJ2lbXHR
 cyomj24Kh4UMYopO7WuVxAiXzp1dz2AKqg4a2BiutZymqkYZGvfvt86P/iT5ovUA
 U8bM94EWe+/6HoqkPBpOo5hb0zwXQ0NNYSCnwcCufqDTT0jdWIgboxJA2Kic1xvb
 h2wdHgwydbOgdINaDQLphQHZ5BtukYo+KIAYFj9OvLVkVYxkMbwcjmFZSZlYQhcC
 OOuiBoXC2IUfBrCJlOaXvqKZa1m43Q==
 =qMZl
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v6.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.8

A few small fixes, some driver specific and one slightly larger one
from Richard which adds a new core helper and updates a small clutch of
drivers to deal with the fact that they were using a helper which
requires that the lock for the list of controls without holding that
lock.  We also have some quirks for new AMD based Lenovo systems.
2024-02-29 08:29:04 +01:00
Raghavendra Rao Ananta
43b3bedb7c KVM: selftests: aarch64: Remove unused functions from vpmu test
vpmu_counter_access's disable_counter() carries a bug that disables
all the counters that are enabled, instead of just the requested one.
Fortunately, it's not an issue as there are no callers of it. Hence,
instead of fixing it, remove the definition entirely.

Remove enable_counter() as it's unused as well.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231122221526.2750966-1-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-29 06:36:15 +00:00
Eric Dumazet
67ea41d19d inet6: expand rcu_read_lock() scope in inet6_dump_addr()
I missed that inet6_dump_addr() is calling in6_dump_addrs()
from two points.

First one under RTNL protection, and second one under rcu_read_lock().

Since we want to remove RTNL use from inet6_dump_addr() very soon,
no longer assume in6_dump_addrs() is protected by RTNL (even
if this is still the case).

Use rcu_read_lock() earlier to fix this lockdep splat:

WARNING: suspicious RCU usage
6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0 Not tainted

net/ipv6/addrconf.c:5317 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor.2/8834:
  #0: ffff88802f554678 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x119/0x780 net/netlink/af_netlink.c:2338
  #1: ffffffff8f377a88 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0x676/0xda0 net/netlink/af_netlink.c:2265
  #2: ffff88807e5f0580 (&ndev->lock){++--}-{2:2}, at: in6_dump_addrs+0xb8/0x1de0 net/ipv6/addrconf.c:5279

stack backtrace:
CPU: 1 PID: 8834 Comm: syz-executor.2 Not tainted 6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
  lockdep_rcu_suspicious+0x220/0x340 kernel/locking/lockdep.c:6712
  in6_dump_addrs+0x1b47/0x1de0 net/ipv6/addrconf.c:5317
  inet6_dump_addr+0x1597/0x1690 net/ipv6/addrconf.c:5428
  netlink_dump+0x6a6/0xda0 net/netlink/af_netlink.c:2266
  __netlink_dump_start+0x59d/0x780 net/netlink/af_netlink.c:2374
  netlink_dump_start include/linux/netlink.h:340 [inline]
  rtnetlink_rcv_msg+0xcf7/0x10d0 net/core/rtnetlink.c:6555
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2547
  netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
  netlink_sendmsg+0x8e0/0xcb0 net/netlink/af_netlink.c:1902
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667

Fixes: c3718936ec ("ipv6: anycast: complete RCU handling of struct ifacaddr6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227222259.4081489-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 20:22:28 -08:00
Eric Dumazet
1200097fa8 net: call skb_defer_free_flush() from __napi_busy_loop()
skb_defer_free_flush() is currently called from net_rx_action()
and napi_threaded_poll().

We should also call it from __napi_busy_loop() otherwise
there is the risk the percpu queue can grow until an IPI
is forced from skb_attempt_defer_free() adding a latency spike.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227210105.3815474-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 20:22:03 -08:00
Eric Dumazet
9912362205 tcp: remove some holes in struct tcp_sock
By moving some fields around, this patch shrinks
holes size from 56 to 32, saving 24 bytes on 64bit arches.

After the patch pahole gives the following for 'struct tcp_sock':

	/* size: 2304, cachelines: 36, members: 162 */
	/* sum members: 2234, holes: 6, sum holes: 32 */
	/* sum bitfield members: 34 bits, bit holes: 5, sum bit holes: 14 bits */
	/* padding: 32 */
	/* paddings: 3, sum paddings: 10 */
	/* forced alignments: 1, forced holes: 1, sum forced holes: 12 */

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227192721.3558982-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 20:21:24 -08:00
Akira Yokosawa
8d4dd9d741 mm/shmem.c: Use new form of *@param in kernel-doc
Use the form of *@param which kernel-doc recognizes now.
This resolves the warnings from "make htmldocs" as reported in [1].

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: [1] https://lore.kernel.org/r/20240223153636.41358be5@canb.auug.org.au/
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2024-02-29 09:49:02 +05:30
Akira Yokosawa
69fc23efc7 kernel-doc: Add unary operator * to $type_param_ref
In kernel-doc comments, unary operator * collides with Sphinx/
docutil's markdown for emphasizing.

This resulted in additional warnings from "make htmldocs":

    WARNING: Inline emphasis start-string without end-string.

, as reported recently [1].

Those have been worked around either by escaping * (like \*param) or by
using inline-literal form of ``*param``, both of which are specific
to Sphinx/docutils.

Such workarounds are against the kenrel-doc's ideal and should better
be avoided.

Instead, add "*" to the list of unary operators kernel-doc recognizes
and make the form of *@param available in kernel-doc comments.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: [1] https://lore.kernel.org/r/20240223153636.41358be5@canb.auug.org.au/
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2024-02-29 09:49:02 +05:30
Oleksij Rempel
0bb7b09392 igb: extend PTP timestamp adjustments to i211
The i211 requires the same PTP timestamp adjustments as the i210,
according to its datasheet. To ensure consistent timestamping across
different platforms, this change extends the existing adjustments to
include the i211.

The adjustment result are tested and comparable for i210 and i211 based
systems.

Fixes: 3f544d2a4d ("igb: adjust PTP timestamps for Tx/Rx latency")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240227184942.362710-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 20:16:48 -08:00
Breno Leitao
82a48affb3 net: bridge: Exit if multicast_init_stats fails
If br_multicast_init_stats() fails, there is no need to set lockdep
classes. Just return from the error path.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227182338.2739884-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 20:15:32 -08:00
Breno Leitao
d35150c79f net: bridge: Do not allocate stats in the driver
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the bridge driver and leverage the network
core allocation.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227182338.2739884-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 20:15:32 -08:00
Ido Schimmel
8a7746982e selftests: vxlan_mdb: Avoid duplicate test names
Rename some test cases to avoid overlapping test names which is
problematic for the kernel test robot. No changes in the test's logic.

Suggested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240227170418.491442-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 20:14:49 -08:00
Lin Ma
743ad091fb rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
In the commit d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.

if (have_flags)
    memcpy(nla_data(attr), &flags, sizeof(flags));
    // attr should point to IFLA_BRIDGE_FLAGS NLA !!!

Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.

This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.

Fixes: d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 19:38:03 -08:00
Zhengchao Shao
9ff74d7718 netlabel: remove impossible return value in netlbl_bitmap_walk
Since commit 446fda4f26 ("[NetLabel]: CIPSOv4 engine"), *bitmap_walk
function only returns -1. Nearly 18 years have passed, -2 scenes never
come up, so there's no need to consider it.

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240227093604.3574241-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28 19:37:34 -08:00