Convert access to DW_IC_INTR_MASK register using the existing
__i2c_dw_write_intr_mask() and a __i2c_dw_read_intr_mask() introduced
here. Motivation to this is to prepare for generic polling mode code
where polling mode will use a SW mask instead of DW_IC_INTR_MASK.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
I was testing the polling mode txgbe_i2c_dw_xfer_quirk() on a HW where
the i2c-designware has interrupt connected and shared with other device.
I noticed there is a bogus interrupt for each transfer.
Reason for this that both polling mode functions call the
i2c_dw_xfer_init() which enable interrupts then followed by immediate
disable by the same polling mode functions. This is enough to trigger
TX_EMPTY interrupt.
Fix this by introducing a __i2c_dw_write_intr_mask() helper that unmasks
interrupts conditionally and use it in i2c_dw_xfer_init().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Currently initialization flow in i2c_dw_probe_master() skips a few steps
and has code duplication for polling mode implementation.
Simplify this by adding a new ACCESS_POLLING flag that is set for those
two platforms that currently use polling mode and use it to skip
interrupt handler setup.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
We found a stability issue on MT8188 when connecting an external monitor
in 2560x1440@144Hz mode. Checked with the designer, there is a function
called "prefetch" which is working during VBP (triggered by VSYNC).
If the duration of VBP is too short, the throughput requirement could
increase more than 3 times and lead to stability issues.
The mode settings that VDOSYS supports are mainly affected by clock
rate and throughput, display driver should filter these settings
according to the SoC's limitation to avoid unstable conditions.
Since currently the mode filter is only available on MT8195 and MT8188
and they share the same compatible name, the reference number (8250)
is hard coded instead of in the driver data.
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.corp-partner.google.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240220093711.20546-2-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Explicitly check that the source of external interrupt is indeed an NMI
in kvm_arch_pmi_in_guest(), which reduces perf-kvm false positive samples
(host samples labelled as guest samples) generated by perf/core NMI mode
if an NMI arrives after VM-Exit, but before kvm_after_interrupt():
# test: perf-record + cpu-cycles:HP (which collects host-only precise samples)
# Symbol Overhead sys usr guest sys guest usr
# ....................................... ........ ........ ........ ......... .........
#
# Before:
[g] entry_SYSCALL_64 24.63% 0.00% 0.00% 24.63% 0.00%
[g] syscall_return_via_sysret 23.23% 0.00% 0.00% 23.23% 0.00%
[g] files_lookup_fd_raw 6.35% 0.00% 0.00% 6.35% 0.00%
# After:
[k] perf_adjust_freq_unthr_context 57.23% 57.23% 0.00% 0.00% 0.00%
[k] __vmx_vcpu_run 4.09% 4.09% 0.00% 0.00% 0.00%
[k] vmx_update_host_rsp 3.17% 3.17% 0.00% 0.00% 0.00%
In the above case, perf records the samples labelled '[g]', the RIPs behind
the weird samples are actually being queried by perf_instruction_pointer()
after determining whether it's in GUEST state or not, and here's the issue:
If VM-Exit is caused by a non-NMI interrupt (such as hrtimer_interrupt) and
at least one PMU counter is enabled on host, the kvm_arch_pmi_in_guest()
will remain true (KVM_HANDLING_IRQ is set) until kvm_before_interrupt().
During this window, if a PMI occurs on host (since the KVM instructions on
host are being executed), the control flow, with the help of the host NMI
context, will be transferred to perf/core to generate performance samples,
thus perf_instruction_pointer() and perf_guest_get_ip() is called.
Since kvm_arch_pmi_in_guest() only checks if there is an interrupt, it may
cause perf/core to mistakenly assume that the source RIP of the host NMI
belongs to the guest world and use perf_guest_get_ip() to get the RIP of
a vCPU that has already exited by a non-NMI interrupt.
Error samples are recorded and presented to the end-user via perf-report.
Such false positive samples could be eliminated by explicitly determining
if the exit reason is KVM_HANDLING_NMI.
Note that when VM-exit is indeed triggered by PMI and before HANDLING_NMI
is cleared, it's also still possible that another PMI is generated on host.
Also for perf/core timer mode, the false positives are still possible since
those non-NMI sources of interrupts are not always being used by perf/core.
For events that are host-only, perf/core can and should eliminate false
positives by checking event->attr.exclude_guest, i.e. events that are
configured to exclude KVM guests should never fire in the guest.
Events that are configured to count host and guest are trickier, perhaps
impossible to handle with 100% accuracy? And regardless of what accuracy
is provided by perf/core, improving KVM's accuracy is cheap and easy, with
no real downsides.
Fixes: dd60d21706 ("KVM: x86: Fix perf timer mode IP reporting")
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231206032054.55070-1-likexu@tencent.com
[sean: massage changelog, squash !!in_nmi() fixup from Like]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The vDSO (and its initial randomization) was introduced in commit 2aae950b21
("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu"), but
had very low entropy. The entropy was improved in commit 394f56fe48
("x86_64, vdso: Fix the vdso address randomization algorithm"), but there
is still improvement to be made.
In principle there should not be executable code at a low entropy offset
from the stack, since the stack and executable code having separate
randomization is part of what makes ASLR stronger.
Remove the only executable code near the stack region and give the vDSO
the same randomized base as other mmap mappings including the linker
and other shared objects. This results in higher entropy being provided
and there's little to no advantage in separating this from the existing
executable code there. This is already how other architectures like
arm64 handle the vDSO.
As an side, while it's sensible for userspace to reserve the initial mmap
base as a region for executable code with a random gap for other mmap
allocations, along with providing randomization within that region, there
isn't much the kernel can do to help due to how dynamic linkers load the
shared objects.
This was extracted from the PaX RANDMMAP feature.
[kees: updated commit log with historical details and other tweaks]
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://github.com/KSPP/linux/issues/280
Link: https://lore.kernel.org/r/20240210091827.work.233-kees@kernel.org
Commit 344da544f1 ("x86/nmi: Print reasons why backtrace NMIs are
ignored") creates a super nice framework to diagnose NMIs.
Every time nmi_exc() is called, it increments a per_cpu counter
(nsp->idt_nmi_seq). At its exit, it also increments the same counter. By
reading this counter it can be seen how many times that function was called
(dividing by 2), and, if the function is still being executed, by checking
the idt_nmi_seq's least significant bit.
On the check side (nmi_backtrace_stall_check()), that variable is queried
to check if the NMI is still being executed, but, there is a mistake in the
bitwise operation. That code wants to check if the least significant bit of
the idt_nmi_seq is set or not, but does the opposite, and checks for all
the other bits, which will always be true after the first exc_nmi()
executed successfully.
This appends the misleading string to the dump "(CPU currently in NMI
handler function)"
Fix it by checking the least significant bit, and if it is set, append the
string.
Fixes: 344da544f1 ("x86/nmi: Print reasons why backtrace NMIs are ignored")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207165237.1048837-1-leitao@debian.org
The vdso rework for the generic union vdso_data_store broke compat VDSO on
arm64:
In file included from arch/arm64/include/asm/lse.h:5,
from arch/arm64/include/asm/cmpxchg.h:14,
from arch/arm64/include/asm/atomic.h:16,
from include/linux/atomic.h:7,
from include/asm-generic/bitops/atomic.h:5,
from arch/arm64/include/asm/bitops.h:25,
from include/linux/bitops.h:68,
from arch/arm64/include/asm/memory.h:209,
from arch/arm64/include/asm/page.h:46,
from include/vdso/datapage.h:22,
from lib/vdso/gettimeofday.c:5,
from <command-line>:
arch/arm64/include/asm/atomic_ll_sc.h:298:9: error: unknown type name 'u128'
298 | u128 full;
| ^~~~
arch/arm64/include/asm/atomic_ll_sc.h:305:24: error: unknown type name 'u128'
305 | static __always_inline u128
\
|
The reason is the include of asm/page.h which in turn includes headers
which are outside the scope of compat VDSO. The only reason for the
asm/page.h include is the required definition of PAGE_SIZE. But as arm64
defines PAGE_SIZE in asm/page-def.h without extra header includes, this
could be used instead.
Caution: this is a quick fix only! The final fix is an upcoming cleanup of
Arnd which consolidates PAGE_SIZE definition. After the cleanup, the
include of asm/page.h to access PAGE_SIZE is no longer required.
Fixes: a0d2fcd62a ("vdso/ARM: Make union vdso_data_store available for all architectures")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240226175023.56679-1-anna-maria@linutronix.de
Link: https://lore.kernel.org/lkml/CA+G9fYtrXXm_KO9fNPz3XaRxHV7UD_yQp-TEuPQrNRHU+_0W_Q@mail.gmail.com/
Commit d7038f9518 ("md-bitmap: don't use ->index for pages backing the
bitmap file") removed page->index from bitmap code, but left wrong code
logic for clustered-md. current code never set slot offset for cluster
nodes, will sometimes cause crash in clustered env.
Call trace (partly):
md_bitmap_file_set_bit+0x110/0x1d8 [md_mod]
md_bitmap_startwrite+0x13c/0x240 [md_mod]
raid1_make_request+0x6b0/0x1c08 [raid1]
md_handle_request+0x1dc/0x368 [md_mod]
md_submit_bio+0x80/0xf8 [md_mod]
__submit_bio+0x178/0x300
submit_bio_noacct_nocheck+0x11c/0x338
submit_bio_noacct+0x134/0x614
submit_bio+0x28/0xdc
submit_bh_wbc+0x130/0x1cc
submit_bh+0x1c/0x28
Fixes: d7038f9518 ("md-bitmap: don't use ->index for pages backing the bitmap file")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240223121128.28985-1-heming.zhao@suse.com
Timing out of signaled jobs can happen during regular operations (e.g.
an exec queue closed immediately after last fence signaled). The TDR can
pass the worker which free jobs. Rather than running through the TDR if
signaled job is found, simply free it without any debug messages.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: José Roberto de Souza <jose.souza@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1271
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223204659.40750-1-matthew.brost@intel.com
Since MOCK_HUGE_PAGE_SIZE was introduced it allows the core code to invoke
mock with large page sizes. This confuses the validation logic that checks
that map/unmap are paired.
This is because the page size computed for map is based on the physical
address and in many cases will always be the base page size, however the
entire range generated by iommufd will be passed to map.
Randomly iommufd can see small groups of physically contiguous pages,
(say 8k unaligned and grouped together), but that group crosses a huge
page boundary. The map side will observe this as a contiguous run and mark
it accordingly, but there is a chance the unmap side will end up
terminating interior huge pages in the middle of that group and trigger a
validation failure. Meaning the validation only works if the core code
passes the iova/length directly from iommufd to mock.
syzkaller randomly hits this with failures like:
WARNING: CPU: 0 PID: 11568 at drivers/iommu/iommufd/selftest.c:461 mock_domain_unmap_pages+0x1c0/0x250
Modules linked in:
CPU: 0 PID: 11568 Comm: syz-executor.0 Not tainted 6.8.0-rc3+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:mock_domain_unmap_pages+0x1c0/0x250
Code: 2b e8 94 37 0f ff 48 d1 eb 31 ff 48 b8 00 00 00 00 00 00 20 00 48 21 c3 48 89 de e8 aa 32 0f ff 48 85 db 75 07 e8 70 37 0f ff <0f> 0b e8 69 37 0f ff 31 f6 31 ff e8 90 32 0f ff e8 5b 37 0f ff 4c
RSP: 0018:ffff88800e707490 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff822dfae6
RDX: ffff88800cf86400 RSI: ffffffff822dfaf0 RDI: 0000000000000007
RBP: ffff88800e7074d8 R08: 0000000000000000 R09: ffffed1001167c90
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000001500000
R13: 0000000000083000 R14: 0000000000000001 R15: 0000000000000800
FS: 0000555556048480(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2dc23000 CR3: 0000000008cbb000 CR4: 0000000000350eb0
Call Trace:
<TASK>
__iommu_unmap+0x281/0x520
iommu_unmap+0xc9/0x180
iopt_area_unmap_domain_range+0x1b1/0x290
iopt_area_unpin_domain+0x590/0x800
__iopt_area_unfill_domain+0x22e/0x650
iopt_area_unfill_domain+0x47/0x60
iopt_unfill_domain+0x187/0x590
iopt_table_remove_domain+0x267/0x2d0
iommufd_hwpt_paging_destroy+0x1f1/0x370
iommufd_object_remove+0x2a3/0x490
iommufd_device_detach+0x23a/0x2c0
iommufd_selftest_destroy+0x7a/0xf0
iommufd_fops_release+0x1d3/0x340
__fput+0x272/0xb50
__fput_sync+0x4b/0x60
__x64_sys_close+0x8b/0x110
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x46/0x4e
Do the simple thing and just disable the validation when the huge page
tests are being run.
Fixes: 7db521e23f ("iommufd/selftest: Hugepage mock domain support")
Link: https://lore.kernel.org/r/0-v1-1e17e60a5c8a+103fb-iommufd_mock_hugepg_jgg@nvidia.com
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Syzkaller reported the following bug:
general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7]
Call Trace:
lock_acquire
lock_acquire+0x1ce/0x4f0
down_read+0x93/0x4a0
iommufd_test_syz_conv_iova+0x56/0x1f0
iommufd_test_access_rw.isra.0+0x2ec/0x390
iommufd_test+0x1058/0x1e30
iommufd_fops_ioctl+0x381/0x510
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl
__x64_sys_ioctl+0x170/0x1e0
do_syscall_x64
do_syscall_64+0x71/0x140
This is because the new iommufd_access_change_ioas() sets access->ioas to
NULL during its process, so the lock might be gone in a concurrent racing
context.
Fix this by doing the same access->ioas sanity as iommufd_access_rw() and
iommufd_access_pin_pages() functions do.
Cc: stable@vger.kernel.org
Fixes: 9227da7816 ("iommufd: Add iommufd_access_change_ioas(_id) helpers")
Link: https://lore.kernel.org/r/3f1932acaf1dd494d404c04364d73ce8f57f3e5e.1708636627.git.nicolinc@nvidia.com
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Syzkaller reported the following bug:
sysfs: cannot create duplicate filename '/devices/iommufd_mock4'
Call Trace:
sysfs_warn_dup+0x71/0x90
sysfs_create_dir_ns+0x1ee/0x260
? sysfs_create_mount_point+0x80/0x80
? spin_bug+0x1d0/0x1d0
? do_raw_spin_unlock+0x54/0x220
kobject_add_internal+0x221/0x970
kobject_add+0x11c/0x1e0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? kset_create_and_add+0x160/0x160
? kobject_put+0x5d/0x390
? bus_get_dev_root+0x4a/0x60
? kobject_put+0x5d/0x390
device_add+0x1d5/0x1550
? __fw_devlink_link_to_consumers.isra.0+0x1f0/0x1f0
? __init_waitqueue_head+0xcb/0x150
iommufd_test+0x462/0x3b60
? lock_release+0x1fe/0x640
? __might_fault+0x117/0x170
? reacquire_held_locks+0x4b0/0x4b0
? iommufd_selftest_destroy+0xd0/0xd0
? __might_fault+0xbe/0x170
iommufd_fops_ioctl+0x256/0x350
? iommufd_option+0x180/0x180
? __lock_acquire+0x1755/0x45f0
__x64_sys_ioctl+0xa13/0x1640
The bug is triggered when Syzkaller created multiple mock devices but
didn't destroy them in the same sequence, messing up the mock_dev_num
counter. Replace the atomic with an mock_dev_ida.
Cc: stable@vger.kernel.org
Fixes: 23a1b46f15 ("iommufd/selftest: Make the mock iommu driver into a real driver")
Link: https://lore.kernel.org/r/5af41d5af6d5c013cc51de01427abb8141b3587e.1708636627.git.nicolinc@nvidia.com
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Syzkaller reported the following WARN_ON:
WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360
Call Trace:
iommufd_access_change_ioas+0x2fe/0x4e0
iommufd_access_destroy_object+0x50/0xb0
iommufd_object_remove+0x2a3/0x490
iommufd_object_destroy_user
iommufd_access_destroy+0x71/0xb0
iommufd_test_staccess_release+0x89/0xd0
__fput+0x272/0xb50
__fput_sync+0x4b/0x60
__do_sys_close
__se_sys_close
__x64_sys_close+0x8b/0x110
do_syscall_x64
The mismatch between the access pointer in the list and the passed-in
pointer is resulting from an overwrite of access->iopt_access_list_id, in
iopt_add_access(). Called from iommufd_access_change_ioas() when
xa_alloc() succeeds but iopt_calculate_iova_alignment() fails.
Add a new_id in iopt_add_access() and only update iopt_access_list_id when
returning successfully.
Cc: stable@vger.kernel.org
Fixes: 9227da7816 ("iommufd: Add iommufd_access_change_ioas(_id) helpers")
Link: https://lore.kernel.org/r/2dda7acb25b8562ec5f1310de828ef5da9ef509c.1708636627.git.nicolinc@nvidia.com
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Workqueue is in the process of cleaning up the distinction between unbound
workqueues w/ @nr_active==1 and ordered workqueues. Explicit WQ_UNBOUND
isn't needed for alloc_ordered_workqueue() and will trigger a warning in the
future. Let's remove it. This doesn't cause any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Message-ID: <ZcF1El7fn5xkeoB1@slm.duckdns.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-ID: <20240202064659.39434-1-liubo03@inspur.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Merge series from Mark Brown <broonie@kernel.org>:
I had cause to look at the MP8859 driver together with the datasheet and
noticed a few small issues and missing features. This series deals with
many of these issues, the device also has support for interrupts which
are not implemented here.
Merge series from Linus Walleij <linus.walleij@linaro.org>:
Despite the work to convert the regulator core to GPIO
descriptors, there are some outliers that use legacy GPIO
numbers in various ways. Convert them all over.
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-ID: <20240202064611.39346-1-liubo03@inspur.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Message-ID: <20240202064512.39259-1-liubo03@inspur.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Mesa has been issuing a single bind operation per ioctl since xe.ko
changed to GPUVA due xe.ko bug #746. If I change Mesa to try again to
issue every single bind operation it can in the same ioctl, it hits
the MAX_BINDS assertion when running Vulkan conformance tests.
Test dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
issues 960 bind operations in a single ioctl, it's the most I could
find in the conformance suite.
I don't see a reason to keep the MAX_BINDS restriction: it doesn't
seem to be preventing any specific issue. If the number is too big for
the memory allocations, then those will fail. Nothing related to
num_binds seems to be using the stack. Let's just get rid of it.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Testcase: dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/746
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215005353.1295420-1-paulo.r.zanoni@intel.com
Use vmalloc in effort to allow a user pass in a large number of binds in
an IOCTL (mesa use case). Also use array allocations rather open coding
the size calculation.
v2: Use __GFP_ACCOUNT for allocations (Thomas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226155554.103384-1-matthew.brost@intel.com
but could not be used in practice so they are being removed.
Regarding the SPI-NAND area, Gigadevice chips were not using the right
buffer for an ECC status check operation.
Aside from these driver fixes, there is also a refcount fix in the MTD
core nodes parsing logic.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmXccMwACgkQJWrqGEe9
VoRSjAf/SdgiZdXz6Fv2uUQYXsHNXO9PnFPSzJ8XNg16g4Jdm/uG0dTIN9W12ZTK
QtI2v8+HLtmIzxcGpHEVSzxMTfMbNbB+CibZm+lQFABeqxrhasFHAEDE0Nmo0dNs
/Dh5Em6fxxOW/pYUoPQk9zm5RNNg+yr9eQk9FKrv723Wprk6tjHjQQJEpUchtXUz
B/qfNSszIQUHPIUtYdNc0A0E1Q4Dr525gBnKFP2lvd6OmjjI35fJ4QvOQuVCQ5b9
Q01y50SojypoFMb+SjiYxFBSnjO3ZECnbf4wvAE0S08tsXUdOfg4ksoiciZbC4mz
6BCw+MooPwi2vUPldeITlAm0Ij0G1A==
=0Nf5
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Many NAND page layouts have been added to the Marvell NAND controller
but could not be used in practice so they are being removed.
Regarding the SPI-NAND area, Gigadevice chips were not using the right
buffer for an ECC status check operation.
Aside from these driver fixes, there is also a refcount fix in the MTD
core nodes parsing logic"
* tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: marvell: fix layouts
mtd: Fix possible refcounting issue when going through partition nodes
mtd: spinand: gigadevice: Fix the get ecc status issue
-----BEGIN PGP SIGNATURE-----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=mBP6
-----END PGP SIGNATURE-----
Merge tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A more fixes for recently reported or discovered problems:
- fix corner case of send that would generate potentially large
stream of zeros if there's a hole at the end of the file
- fix chunk validation in zoned mode on conventional zones, it was
possible to create chunks that would not be allowed on sequential
zones
- fix validation of dev-replace ioctl filenames
- fix KCSAN warnings about access to block reserve struct members"
* tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix data race at btrfs_use_block_rsv() when accessing block reserve
btrfs: fix data races when accessing the reserved amount of block reserves
btrfs: send: don't issue unnecessary zero writes for trailing hole
btrfs: dev-replace: properly validate device names
btrfs: zoned: don't skip block group profile checks on conventional zones
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This are various fixes and clean up gathered while working on Amlogic audio
support. These help better handle higher and unusual clock configuration
for TDM, SPDIF or PDM.
The userspace consumer can be built as a module but it cannot be
automatically probed as there is no device table to match it up with
device tree nodes.
Add the missing macro so that the module can load automatically.
Fixes: 5c51d4afcf ("regulator: userspace-consumer: Handle regulator-output DT nodes")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://msgid.link/r/20240226160554.1453283-1-jkeeping@inmusicbrands.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If 'mddev->pers' is NULL, there is nothing to do in md_set_readonly().
Except for md_ioctl(), the other two callers of md_set_readonly() have
already checked 'mddev->pers'. To simplify the code, move the check of
'mddev->pers' to the caller.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-10-linan666@huaweicloud.com
Before stopping or setting readonly, mddev_set_closing_and_sync_blockdev()
is always called to check the openers. So no longer need to check it again
in do_md_stop() and md_set_readonly(). Clean it up.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-9-linan666@huaweicloud.com
Commit a05b7ea03d ("md: avoid crash when stopping md array races
with closing other open fds.") added sync_block before stopping raid and
setting readonly. Later in commit 260fa034ef ("md: avoid deadlock when
dirty buffers during md_stop.") it is moved to ioctl. array_state_store()
was ignored. Add sync blockdev to array_state_store() now.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-8-linan666@huaweicloud.com
The raid should not be opened anymore when it is about to be stopped.
However, other processes can open it again if the flag MD_CLOSING is
cleared before exiting. From now on, this flag will not be cleared when
the raid will be stopped.
Fixes: 065e519e71 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-6-linan666@huaweicloud.com
There is nothing to do at 'out' before setting 'did_set_md_closing'
in md_ioctl(). Return directly, and it will help us to remove
'did_set_md_closing' later.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-5-linan666@huaweicloud.com
'disk->private_data' is set to mddev in md_alloc() and never set to NULL,
and users need to open mddev before submitting ioctl. So mddev must not
have been freed during ioctl, and there is no need to check mddev here.
Clean up it.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-4-linan666@huaweicloud.com
The addition of bal_rank_mask with encoding version 17 was merged
into ceph.git in Oct 2022 and made it into v18.2.0 release normally.
A few months later, the much delayed addition of max_xattr_size got
merged, also with encoding version 17, placed before bal_rank_mask
in the encoding -- but it didn't make v18.2.0 release.
The way this ended up being resolved on the MDS side is that
bal_rank_mask will continue to be encoded in version 17 while
max_xattr_size is now encoded in version 18. This does mean that
older kernels will misdecode version 17, but this is also true for
v18.2.0 and v18.2.1 clients in userspace.
The best we can do is backport this adjustment -- see ceph.git
commit 78abfeaff27fee343fb664db633de5b221699a73 for details.
[ idryomov: changelog ]
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/64440
Fixes: d93231a6bc ("ceph: prevent a client from exceeding the MDS maximum xattr size")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@ibm.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add initial driver for the MAX6958 and MAX6959 7-segment LED
controllers.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add initial device tree documentation for Maxim MAX6958/6959.
As per reviewer's request mention the fact of absence the reset
and power enable pins, since the hardware is quite simple.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Merge series from David Lechner <dlechner@baylibre.com>:
This is a follow-up to [1] where it was suggested to break down the
proposed SPI offload support into smaller series.
This takes on the first suggested task of introducing an API to
"pre-cook" SPI messages. This idea was first discussed extensively in
2013 [2][3] and revisited more briefly 2022 [4].
The goal here is to be able to improve performance (higher throughput,
and reduced CPU usage) by allowing peripheral drivers that use the
same struct spi_message repeatedly to "pre-cook" the message once to
avoid repeating the same validation, and possibly other operations each
time the message is sent.
This series includes __spi_validate() and the automatic splitting of
xfers in the optimizations. Another frequently suggested optimization
is doing DMA mapping only once. This is not included in this series, but
can be added later (preferably by someone with a real use case for it).
To show how this all works and get some real-world measurements, this
series includes the core changes, optimization of a SPI controller
driver, and optimization of an ADC driver. This test case was only able
to take advantage of the single validation optimization, since it didn't
require splitting transfers. With these changes, CPU usage of the
threaded interrupt handler, which calls spi_sync(), was reduced from
83% to 73% while at the same time the sample rate (frequency of SPI
xfers) was increased from 20kHz to 25kHz.
[1]: https://lore.kernel.org/linux-spi/20240109-axi-spi-engine-series-3-v1-1-e42c6a986580@baylibre.com/T/
[2]: https://lore.kernel.org/linux-spi/E81F4810-48DD-41EE-B110-D0D848B8A510@martin.sperl.org/T/
[3]: https://lore.kernel.org/linux-spi/39DEC004-10A1-47EF-9D77-276188D2580C@martin.sperl.org/T/
[4]: https://lore.kernel.org/linux-spi/20220525163946.48ea40c9@erd992/T/
When CONFIG_NTFS3_LZX_XPRESS is not set then we get the following build
error:
fs/ntfs3/frecord.c:2460:16: error: unused variable ‘i_size’
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Fixes: 4fd6c08a16 ("fs/ntfs3: Use i_size_read and i_size_write")
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When linking or renaming a file, if only one of the source or
destination directory is backed by an S_PRIVATE inode, then the related
set of layer masks would be used as uninitialized by
is_access_to_paths_allowed(). This would result to indeterministic
access for one side instead of always being allowed.
This bug could only be triggered with a mounted filesystem containing
both S_PRIVATE and !S_PRIVATE inodes, which doesn't seem possible.
The collect_domain_accesses() calls return early if
is_nouser_or_private() returns false, which means that the directory's
superblock has SB_NOUSER or its inode has S_PRIVATE. Because rename or
link actions are only allowed on the same mounted filesystem, the
superblock is always the same for both source and destination
directories. However, it might be possible in theory to have an
S_PRIVATE parent source inode with an !S_PRIVATE parent destination
inode, or vice versa.
To make sure this case is not an issue, explicitly initialized both set
of layer masks to 0, which means to allow all actions on the related
side. If at least on side has !S_PRIVATE, then
collect_domain_accesses() and is_access_to_paths_allowed() check for the
required access rights.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shervin Oloumi <enlightened@chromium.org>
Cc: stable@vger.kernel.org
Fixes: b91c3e4ea7 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Link: https://lore.kernel.org/r/20240219190345.2928627-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The patchset may not cover all codecs found in the codecs/ directory -
noticed a possible improvement and grepped for similar pattern across C
files found in the directory. Those addressed here seem pretty
straightforward.
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Clean up ignoring data nodes in mipi-disco-img.c: use { } initialiser, fix
a kernel-doc warning and use isdigit().
Fixes: 5bd4edbbf9 ("ACPI: property: Ignore bad graph port nodes on Dell XPS 9315")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Just to make things clearer, return TEST_FAIL (-1) instead of an open
coded -1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/ZdepeMsjagbf1ufD@x1
Arm64 doesn't have Model in /proc/cpuinfo and, thus, cpu_desc doesn't get
assigned.
Running
$ perf data convert --to-json perf.data.json
ends up calling output_json_string() with NULL pointer, which causes a
segmentation fault.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Evgeny Pistun <kotborealis@awooo.ru>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240223220458.15282-1-ilkka@os.amperecomputing.com
MKTME repurposes the high bit of physical address to key id for encryption
key and, even though MAXPHYADDR in CPUID[0x80000008] remains the same,
the valid bits in the MTRR mask register are based on the reduced number
of physical address bits.
detect_tme() in arch/x86/kernel/cpu/intel.c detects TME and subtracts
it from the total usable physical bits, but it is called too late.
Move the call to early_init_intel() so that it is called in setup_arch(),
before MTRRs are setup.
This fixes boot on TDX-enabled systems, which until now only worked with
"disable_mtrr_cleanup". Without the patch, the values written to the
MTRRs mask registers were 52-bit wide (e.g. 0x000fffff_80000800) and
the writes failed; with the patch, the values are 46-bit wide, which
matches the reduced MAXPHYADDR that is shown in /proc/cpuinfo.
Reported-by: Zixi Chen <zixchen@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-3-pbonzini%40redhat.com
In commit fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct
value straight away, instead of a two-phase approach"), the initialization
of c->x86_phys_bits was moved after this_cpu->c_early_init(c). This is
incorrect because early_init_amd() expected to be able to reduce the
value according to the contents of CPUID leaf 0x8000001f.
Fortunately, the bug was negated by init_amd()'s call to early_init_amd(),
which does reduce x86_phys_bits in the end. However, this is very
late in the boot process and, most notably, the wrong value is used for
x86_phys_bits when setting up MTRRs.
To fix this, call get_cpu_address_sizes() as soon as X86_FEATURE_CPUID is
set/cleared, and c->extended_cpuid_level is retrieved.
Fixes: fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-2-pbonzini%40redhat.com
